diff options
| author | Grant C. Likely <grant.likely@secretlab.ca> | 2006-01-19 01:12:48 -0700 |
|---|---|---|
| committer | Paul Mackerras <paulus@samba.org> | 2006-02-07 22:35:58 +1100 |
| commit | 1a42e53d175074f340a3f85042ed64cfc51be216 (patch) | |
| tree | 6426aebaa777d30be7ea7e6f3f6334fb94029230 /arch/ppc/platforms/4xx/virtex.h | |
| parent | 562e7370a4d59d7ee8988fb0e13707d1f01a046a (diff) | |
[PATCH] powerpc: Migrate Xilinx Vertex support from the OCP bus to the platfom bus.
This patch only deals with the serial port definitions as there is no
support for any other xilinx IP cores in the kernel tree at the moment.
Board specific configuration moved out of virtex.[ch] and into the
xparameters.h wrapper.
This also prepares for the transition to the flattened device tree model.
When the bootloader provides a device tree generated from an xparameters.h
files, the kernel will no longer need xparameters/*. The platform bus will
get populated with data from the device tree, and the device drivers will
be automatically connected to the devices. Only the bootloader (or
ppcboot) will need xparameters directly.
Signed-off-by: Grant C. Likely <grant.likely@secretlab.ca>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Diffstat (limited to 'arch/ppc/platforms/4xx/virtex.h')
| -rw-r--r-- | arch/ppc/platforms/4xx/virtex.h | 86 |
1 files changed, 11 insertions, 75 deletions
diff --git a/arch/ppc/platforms/4xx/virtex.h b/arch/ppc/platforms/4xx/virtex.h index 049c767d33e..1a01b81cff1 100644 --- a/arch/ppc/platforms/4xx/virtex.h +++ b/arch/ppc/platforms/4xx/virtex.h @@ -15,85 +15,21 @@ #ifndef __ASM_VIRTEX_H__ #define __ASM_VIRTEX_H__ -#include <linux/config.h> -#include <platforms/4xx/xparameters/xparameters.h> - /* serial defines */ -#define RS_TABLE_SIZE 4 /* change this and add more devices below - if you have more then 4 16x50 UARTs */ - -#define BASE_BAUD (XPAR_UARTNS550_0_CLOCK_FREQ_HZ/16) - -/* The serial ports in the Virtex-II Pro have each I/O byte in the - * LSByte of a word. This means that iomem_reg_shift needs to be 2 to - * change the byte offsets into word offsets. In addition the base - * addresses need to have 3 added to them to get to the LSByte. - */ -#define STD_UART_OP(num) \ - { 0, BASE_BAUD, 0, XPAR_INTC_0_UARTNS550_##num##_VEC_ID, \ - ASYNC_BOOT_AUTOCONF, \ - .iomem_base = (u8 *)XPAR_UARTNS550_##num##_BASEADDR + 3, \ - .iomem_reg_shift = 2, \ - .io_type = SERIAL_IO_MEM}, - -#if defined(XPAR_INTC_0_UARTNS550_0_VEC_ID) -#define ML300_UART0 STD_UART_OP(0) -#else -#define ML300_UART0 -#endif - -#if defined(XPAR_INTC_0_UARTNS550_1_VEC_ID) -#define ML300_UART1 STD_UART_OP(1) -#else -#define ML300_UART1 -#endif - -#if defined(XPAR_INTC_0_UARTNS550_2_VEC_ID) -#define ML300_UART2 STD_UART_OP(2) -#else -#define ML300_UART2 -#endif - -#if defined(XPAR_INTC_0_UARTNS550_3_VEC_ID) -#define ML300_UART3 STD_UART_OP(3) -#else -#define ML300_UART3 -#endif - -#if defined(XPAR_INTC_0_UARTNS550_4_VEC_ID) -#error Edit this file to add more devices. -#elif defined(XPAR_INTC_0_UARTNS550_3_VEC_ID) -#define NR_SER_PORTS 4 -#elif defined(XPAR_INTC_0_UARTNS550_2_VEC_ID) -#define NR_SER_PORTS 3 -#elif defined(XPAR_INTC_0_UARTNS550_1_VEC_ID) -#define NR_SER_PORTS 2 -#elif defined(XPAR_INTC_0_UARTNS550_0_VEC_ID) -#define NR_SER_PORTS 1 -#else -#define NR_SER_PORTS 0 -#endif +#include <asm/ibm405.h> -#if defined(CONFIG_UART0_TTYS0) -#define SERIAL_PORT_DFNS \ - ML300_UART0 \ - ML300_UART1 \ - ML300_UART2 \ - ML300_UART3 +/* Ugly, ugly, ugly! BASE_BAUD defined here to keep 8250.c happy. */ +#if !defined(BASE_BAUD) + #define BASE_BAUD (0) /* dummy value; not used */ #endif - -#if defined(CONFIG_UART0_TTYS1) -#define SERIAL_PORT_DFNS \ - ML300_UART1 \ - ML300_UART0 \ - ML300_UART2 \ - ML300_UART3 + +/* Device type enumeration for platform bus definitions */ +#ifndef __ASSEMBLY__ +enum ppc_sys_devices { + VIRTEX_UART, +}; #endif - -#define DCRN_CPMFR_BASE 0 - -#include <asm/ibm405.h> - + #endif /* __ASM_VIRTEX_H__ */ #endif /* __KERNEL__ */ |