[PATCH] ppc32: Added support for all MPC8548 internal interrupts

The MPC8548 has 48 internal interrupts and 12 external interrupts.  The
previous generation PowerQUICC III devices only had 32 internal and 12
external interrupts on the primary interrupt controller.

Expanded the number of internal interrupts to 48 for all PowerQUICC III
processors and moved the interrupt numbers for the external after the 48
internal interrupt lines, rather than putting the 12 new internal
interrupts at the end and ifdef'ng the whole mess.  As parted of this
created a macro which represents the internal interrupt senses since they
are the same on all PQ3 processors.

Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

4 files changed, 12 insertions, 137 deletions

diff --git a/arch/ppc/platforms/85xx/mpc85xx_ads_common.c b/arch/ppc/platforms/85xx/mpc85xx_ads_common.c
index ba9f9f562c4..30397623fa6 100644
--- a/arch/ppc/platforms/85xx/mpc85xx_ads_common.c
+++ b/arch/ppc/platforms/85xx/mpc85xx_ads_common.c
@@ -59,40 +59,8 @@ extern unsigned long total_memory;	/* in mm/init */
 unsigned char __res[sizeof (bd_t)];
 
 /* Internal interrupts are all Level Sensitive, and Positive Polarity */
-
 static u_char mpc85xx_ads_openpic_initsenses[] __initdata = {
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal  0: L2 Cache */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal  1: ECM */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal  2: DDR DRAM */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal  3: LBIU */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal  4: DMA 0 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal  5: DMA 1 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal  6: DMA 2 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal  7: DMA 3 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal  8: PCI/PCI-X */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal  9: RIO Inbound Port Write Error */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 10: RIO Doorbell Inbound */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 11: RIO Outbound Message */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 12: RIO Inbound Message */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 13: TSEC 0 Transmit */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 14: TSEC 0 Receive */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 15: Unused */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 16: Unused */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 17: Unused */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 18: TSEC 0 Receive/Transmit Error */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 19: TSEC 1 Transmit */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 20: TSEC 1 Receive */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 21: Unused */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 22: Unused */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 23: Unused */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 24: TSEC 1 Receive/Transmit Error */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 25: Fast Ethernet */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 26: DUART */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 27: I2C */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 28: Performance Monitor */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 29: Unused */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 30: CPM */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 31: Unused */
+	MPC85XX_INTERNAL_IRQ_SENSES,
 	0x0,						/* External  0: */
 #if defined(CONFIG_PCI)
 	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* External 1: PCI slot 0 */
@@ -159,7 +127,7 @@ mpc85xx_ads_init_IRQ(void)
 	/* Skip reserved space and internal sources */
 	openpic_set_sources(0, 32, OpenPIC_Addr + 0x10200);
 	/* Map PIC IRQs 0-11 */
-	openpic_set_sources(32, 12, OpenPIC_Addr + 0x10000);
+	openpic_set_sources(48, 12, OpenPIC_Addr + 0x10000);
 
 	/* we let openpic interrupts starting from an offset, to
 	 * leave space for cascading interrupts underneath.
diff --git a/arch/ppc/platforms/85xx/mpc85xx_cds_common.c b/arch/ppc/platforms/85xx/mpc85xx_cds_common.c
index 2d04bf599d2..bee6633f460 100644
--- a/arch/ppc/platforms/85xx/mpc85xx_cds_common.c
+++ b/arch/ppc/platforms/85xx/mpc85xx_cds_common.c
@@ -73,40 +73,8 @@ static int cds_pci_slot = 2;
 static volatile u8 * cadmus;
 
 /* Internal interrupts are all Level Sensitive, and Positive Polarity */
-
 static u_char mpc85xx_cds_openpic_initsenses[] __initdata = {
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal  0: L2 Cache */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal  1: ECM */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal  2: DDR DRAM */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal  3: LBIU */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal  4: DMA 0 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal  5: DMA 1 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal  6: DMA 2 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal  7: DMA 3 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal  8: PCI/PCI-X */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal  9: RIO Inbound Port Write Error */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 10: RIO Doorbell Inbound */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 11: RIO Outbound Message */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 12: RIO Inbound Message */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 13: TSEC 0 Transmit */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 14: TSEC 0 Receive */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 15: Unused */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 16: Unused */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 17: Unused */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 18: TSEC 0 Receive/Transmit Error */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 19: TSEC 1 Transmit */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 20: TSEC 1 Receive */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 21: Unused */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 22: Unused */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 23: Unused */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 24: TSEC 1 Receive/Transmit Error */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 25: Fast Ethernet */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 26: DUART */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 27: I2C */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 28: Performance Monitor */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 29: Unused */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 30: CPM */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 31: Unused */
+	MPC85XX_INTERNAL_IRQ_SENSES,
 #if defined(CONFIG_PCI)
 	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* External 0: PCI1 slot */
 	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* External 1: PCI1 slot */
@@ -182,7 +150,6 @@ void __init
 mpc85xx_cds_init_IRQ(void)
 {
 	bd_t *binfo = (bd_t *) __res;
-	int i;
 
 	/* Determine the Physical Address of the OpenPIC regs */
 	phys_addr_t OpenPIC_PAddr = binfo->bi_immr_base + MPC85xx_OPENPIC_OFFSET;
@@ -191,9 +158,13 @@ mpc85xx_cds_init_IRQ(void)
 	OpenPIC_NumInitSenses = sizeof (mpc85xx_cds_openpic_initsenses);
 
 	/* Skip reserved space and internal sources */
+#ifdef CONFIG_MPC8548
+	openpic_set_sources(0, 48, OpenPIC_Addr + 0x10200);
+#else
 	openpic_set_sources(0, 32, OpenPIC_Addr + 0x10200);
+#endif
 	/* Map PIC IRQs 0-11 */
-	openpic_set_sources(32, 12, OpenPIC_Addr + 0x10000);
+	openpic_set_sources(48, 12, OpenPIC_Addr + 0x10000);
 
 	/* we let openpic interrupts starting from an offset, to
 	 * leave space for cascading interrupts underneath.
diff --git a/arch/ppc/platforms/85xx/sbc85xx.c b/arch/ppc/platforms/85xx/sbc85xx.c
index 2d638c1c1bd..a7cb625b2d0 100644
--- a/arch/ppc/platforms/85xx/sbc85xx.c
+++ b/arch/ppc/platforms/85xx/sbc85xx.c
@@ -59,40 +59,8 @@ unsigned long pci_dram_offset = 0;
 extern unsigned long total_memory;	/* in mm/init */
 
 /* Internal interrupts are all Level Sensitive, and Positive Polarity */
-
 static u_char sbc8560_openpic_initsenses[] __initdata = {
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal  0: L2 Cache */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal  1: ECM */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal  2: DDR DRAM */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal  3: LBIU */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal  4: DMA 0 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal  5: DMA 1 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal  6: DMA 2 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal  7: DMA 3 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal  8: PCI/PCI-X */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal  9: RIO Inbound Port Write Error */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 10: RIO Doorbell Inbound */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 11: RIO Outbound Message */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 12: RIO Inbound Message */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 13: TSEC 0 Transmit */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 14: TSEC 0 Receive */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 15: Unused */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 16: Unused */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 17: Unused */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 18: TSEC 0 Receive/Transmit Error */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 19: TSEC 1 Transmit */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 20: TSEC 1 Receive */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 21: Unused */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 22: Unused */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 23: Unused */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 24: TSEC 1 Receive/Transmit Error */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 25: Fast Ethernet */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 26: DUART */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 27: I2C */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 28: Performance Monitor */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 29: Unused */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 30: CPM */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 31: Unused */
+	MPC85XX_INTERNAL_IRQ_SENSES,
 	0x0,				/* External  0: */
 	0x0,				/* External  1: */
 #if defined(CONFIG_PCI)
@@ -159,7 +127,7 @@ sbc8560_init_IRQ(void)
 	/* Skip reserved space and internal sources */
 	openpic_set_sources(0, 32, OpenPIC_Addr + 0x10200);
 	/* Map PIC IRQs 0-11 */
-	openpic_set_sources(32, 12, OpenPIC_Addr + 0x10000);
+	openpic_set_sources(48, 12, OpenPIC_Addr + 0x10000);
 
 	/* we let openpic interrupts starting from an offset, to 
 	 * leave space for cascading interrupts underneath.
diff --git a/arch/ppc/platforms/85xx/stx_gp3.c b/arch/ppc/platforms/85xx/stx_gp3.c
index bc95836e417..bc0a99638ff 100644
--- a/arch/ppc/platforms/85xx/stx_gp3.c
+++ b/arch/ppc/platforms/85xx/stx_gp3.c
@@ -72,38 +72,7 @@ unsigned long pci_dram_offset = 0;
 
 /* Internal interrupts are all Level Sensitive, and Positive Polarity */
 static u8 gp3_openpic_initsenses[] __initdata = {
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal  0: L2 Cache */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal  1: ECM */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal  2: DDR DRAM */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal  3: LBIU */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal  4: DMA 0 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal  5: DMA 1 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal  6: DMA 2 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal  7: DMA 3 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal  8: PCI/PCI-X */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal  9: RIO Inbound Port Write Error */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 10: RIO Doorbell Inbound */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 11: RIO Outbound Message */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 12: RIO Inbound Message */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 13: TSEC 0 Transmit */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 14: TSEC 0 Receive */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 15: Unused */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 16: Unused */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 17: Unused */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 18: TSEC 0 Receive/Transmit Error */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 19: TSEC 1 Transmit */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 20: TSEC 1 Receive */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 21: Unused */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 22: Unused */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 23: Unused */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 24: TSEC 1 Receive/Transmit Error */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 25: Fast Ethernet */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 26: DUART */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 27: I2C */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 28: Performance Monitor */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 29: Unused */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 30: CPM */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 31: Unused */
+	MPC85XX_INTERNAL_IRQ_SENSES,
 	0x0,						/* External  0: */
 #if defined(CONFIG_PCI)
 	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* External 1: PCI slot 0 */
@@ -200,7 +169,6 @@ static struct irqaction cpm2_irqaction = {
 static void __init
 gp3_init_IRQ(void)
 {
-	int i;
 	bd_t *binfo = (bd_t *) __res;
 
 	/*
@@ -218,7 +186,7 @@ gp3_init_IRQ(void)
 	openpic_set_sources(0, 32, OpenPIC_Addr + 0x10200);
 
 	/* Map PIC IRQs 0-11 */
-	openpic_set_sources(32, 12, OpenPIC_Addr + 0x10000);
+	openpic_set_sources(48, 12, OpenPIC_Addr + 0x10000);
 
 	/*
 	 * Let openpic interrupts starting from an offset, to