powerpc: Remove arch/ppc and include/asm-ppc

All the maintained platforms are now in arch/powerpc, so the old
arch/ppc stuff can now go away.

Acked-by: Adrian Bunk <bunk@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Becky Bruce <becky.bruce@freescale.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Jochen Friedrich <jochen@scram.de>
Acked-by: John Linn <john.linn@xilinx.com>
Acked-by: Jon Loeliger <jdl@freescale.com>
Acked-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
Acked-by: Olof Johansson <olof@lixom.net>
Acked-by: Peter Korsgaard <jacmet@sunsite.dk>
Acked-by: Scott Wood <scottwood@freescale.com>
Acked-by: Sean MacLennan <smaclennan@pikatech.com>
Acked-by: Segher Boessenkool <segher@kernel.crashing.org>
Acked-by: Stefan Roese <sr@denx.de>
Acked-by: Stephen Neuendorffer <stephen.neuendorffer@xilinx.com>
Acked-by: Wolfgang Denk <wd@denx.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>

1 files changed, 0 insertions, 574 deletions

diff --git a/arch/ppc/platforms/chestnut.c b/arch/ppc/platforms/chestnut.c
deleted file mode 100644
index 27c140f218e..00000000000
--- a/arch/ppc/platforms/chestnut.c
+++ /dev/null
@@ -1,574 +0,0 @@
-/*
- * Board setup routines for IBM Chestnut
- *
- * Author: <source@mvista.com>
- *
- * <2004> (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/stddef.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/reboot.h>
-#include <linux/kdev_t.h>
-#include <linux/major.h>
-#include <linux/blkdev.h>
-#include <linux/console.h>
-#include <linux/root_dev.h>
-#include <linux/initrd.h>
-#include <linux/delay.h>
-#include <linux/seq_file.h>
-#include <linux/serial.h>
-#include <linux/serial_core.h>
-#include <linux/serial_8250.h>
-#include <linux/mtd/physmap.h>
-#include <asm/system.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/time.h>
-#include <asm/dma.h>
-#include <asm/io.h>
-#include <asm/hw_irq.h>
-#include <asm/machdep.h>
-#include <asm/kgdb.h>
-#include <asm/bootinfo.h>
-#include <asm/mv64x60.h>
-#include <platforms/chestnut.h>
-
-static void __iomem *sram_base; /* Virtual addr of Internal SRAM */
-static void __iomem *cpld_base; /* Virtual addr of CPLD Regs */
-
-static mv64x60_handle_t	bh;
-
-extern void gen550_progress(char *, unsigned short);
-extern void gen550_init(int, struct uart_port *);
-extern void mv64360_pcibios_fixup(mv64x60_handle_t *bh);
-
-#define CHESTNUT_PRESERVE_MASK (BIT(MV64x60_CPU2DEV_0_WIN) | \
-				BIT(MV64x60_CPU2DEV_1_WIN) | \
-				BIT(MV64x60_CPU2DEV_2_WIN) | \
-				BIT(MV64x60_CPU2DEV_3_WIN) | \
-				BIT(MV64x60_CPU2BOOT_WIN))
-/**************************************************************************
- * FUNCTION: chestnut_calibrate_decr
- *
- * DESCRIPTION: initialize decrementer interrupt frequency (used as system
- *              timer)
- *
- ****/
-static void __init
-chestnut_calibrate_decr(void)
-{
-	ulong freq;
-
-	freq = CHESTNUT_BUS_SPEED / 4;
-
-	printk("time_init: decrementer frequency = %lu.%.6lu MHz\n",
-		freq/1000000, freq%1000000);
-
-	tb_ticks_per_jiffy = freq / HZ;
-	tb_to_us = mulhwu_scale_factor(freq, 1000000);
-}
-
-static int
-chestnut_show_cpuinfo(struct seq_file *m)
-{
-	seq_printf(m, "vendor\t\t: IBM\n");
-	seq_printf(m, "machine\t\t: 750FX/GX Eval Board (Chestnut/Buckeye)\n");
-
-	return 0;
-}
-
-/**************************************************************************
- * FUNCTION: chestnut_find_end_of_memory
- *
- * DESCRIPTION: ppc_md memory size callback
- *
- ****/
-unsigned long __init
-chestnut_find_end_of_memory(void)
-{
-   	static int  mem_size = 0;
-
-   	if (mem_size == 0) {
-      		mem_size = mv64x60_get_mem_size(CONFIG_MV64X60_NEW_BASE,
-				MV64x60_TYPE_MV64460);
-   	}
-   	return mem_size;
-}
-
-#if defined(CONFIG_SERIAL_8250)
-static void __init
-chestnut_early_serial_map(void)
-{
-	struct uart_port port;
-
-	/* Setup serial port access */
-	memset(&port, 0, sizeof(port));
-	port.uartclk = BASE_BAUD * 16;
-	port.irq = UART0_INT;
-	port.flags = STD_COM_FLAGS | UPF_IOREMAP;
-	port.iotype = UPIO_MEM;
-	port.mapbase = CHESTNUT_UART0_IO_BASE;
-	port.regshift = 0;
-
-	if (early_serial_setup(&port) != 0)
-		printk("Early serial init of port 0 failed\n");
-
-	/* Assume early_serial_setup() doesn't modify serial_req */
-	port.line = 1;
-	port.irq = UART1_INT;
-	port.mapbase = CHESTNUT_UART1_IO_BASE;
-
-	if (early_serial_setup(&port) != 0)
-		printk("Early serial init of port 1 failed\n");
-}
-#endif
-
-/**************************************************************************
- * FUNCTION: chestnut_map_irq
- *
- * DESCRIPTION: 0 return since PCI IRQs not needed
- *
- ****/
-static int __init
-chestnut_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
-	static char pci_irq_table[][4] = {
-		{CHESTNUT_PCI_SLOT0_IRQ, CHESTNUT_PCI_SLOT0_IRQ,
-		 CHESTNUT_PCI_SLOT0_IRQ, CHESTNUT_PCI_SLOT0_IRQ},
-		{CHESTNUT_PCI_SLOT1_IRQ, CHESTNUT_PCI_SLOT1_IRQ,
-		 CHESTNUT_PCI_SLOT1_IRQ, CHESTNUT_PCI_SLOT1_IRQ},
-		{CHESTNUT_PCI_SLOT2_IRQ, CHESTNUT_PCI_SLOT2_IRQ,
-		 CHESTNUT_PCI_SLOT2_IRQ, CHESTNUT_PCI_SLOT2_IRQ},
-		{CHESTNUT_PCI_SLOT3_IRQ, CHESTNUT_PCI_SLOT3_IRQ,
-		 CHESTNUT_PCI_SLOT3_IRQ, CHESTNUT_PCI_SLOT3_IRQ},
-	};
-	const long min_idsel = 1, max_idsel = 4, irqs_per_slot = 4;
-
-	return PCI_IRQ_TABLE_LOOKUP;
-}
-
-
-/**************************************************************************
- * FUNCTION: chestnut_setup_bridge
- *
- * DESCRIPTION: initalize board-specific settings on the MV64360
- *
- ****/
-static void __init
-chestnut_setup_bridge(void)
-{
-	struct mv64x60_setup_info	si;
-	int i;
-
-   	if ( ppc_md.progress )
-		ppc_md.progress("chestnut_setup_bridge: enter", 0);
-
-	memset(&si, 0, sizeof(si));
-
-	si.phys_reg_base = CONFIG_MV64X60_NEW_BASE;
-
-	/* setup only PCI bus 0 (bus 1 not used) */
-	si.pci_0.enable_bus = 1;
-	si.pci_0.pci_io.cpu_base = CHESTNUT_PCI0_IO_PROC_ADDR;
-	si.pci_0.pci_io.pci_base_hi = 0;
-	si.pci_0.pci_io.pci_base_lo = CHESTNUT_PCI0_IO_PCI_ADDR;
-	si.pci_0.pci_io.size = CHESTNUT_PCI0_IO_SIZE;
-	si.pci_0.pci_io.swap = MV64x60_CPU2PCI_SWAP_NONE; /* no swapping */
-	si.pci_0.pci_mem[0].cpu_base = CHESTNUT_PCI0_MEM_PROC_ADDR;
-	si.pci_0.pci_mem[0].pci_base_hi = CHESTNUT_PCI0_MEM_PCI_HI_ADDR;
-	si.pci_0.pci_mem[0].pci_base_lo = CHESTNUT_PCI0_MEM_PCI_LO_ADDR;
-	si.pci_0.pci_mem[0].size = CHESTNUT_PCI0_MEM_SIZE;
-	si.pci_0.pci_mem[0].swap = MV64x60_CPU2PCI_SWAP_NONE; /* no swapping */
-	si.pci_0.pci_cmd_bits = 0;
-	si.pci_0.latency_timer = 0x80;
-
-	for (i=0; i<MV64x60_CPU2MEM_WINDOWS; i++) {
-#if defined(CONFIG_NOT_COHERENT_CACHE)
-		si.cpu_prot_options[i] = 0;
-		si.enet_options[i] = MV64360_ENET2MEM_SNOOP_NONE;
-		si.mpsc_options[i] = MV64360_MPSC2MEM_SNOOP_NONE;
-		si.idma_options[i] = MV64360_IDMA2MEM_SNOOP_NONE;
-
-		si.pci_1.acc_cntl_options[i] =
-		    MV64360_PCI_ACC_CNTL_SNOOP_NONE |
-		    MV64360_PCI_ACC_CNTL_SWAP_NONE |
-		    MV64360_PCI_ACC_CNTL_MBURST_128_BYTES |
-		    MV64360_PCI_ACC_CNTL_RDSIZE_256_BYTES;
-#else
-		si.cpu_prot_options[i] = 0;
-		si.enet_options[i] = MV64360_ENET2MEM_SNOOP_NONE; /* errata */
-		si.mpsc_options[i] = MV64360_MPSC2MEM_SNOOP_NONE; /* errata */
-		si.idma_options[i] = MV64360_IDMA2MEM_SNOOP_NONE; /* errata */
-
-		si.pci_1.acc_cntl_options[i] =
-		    MV64360_PCI_ACC_CNTL_SNOOP_WB |
-		    MV64360_PCI_ACC_CNTL_SWAP_NONE |
-		    MV64360_PCI_ACC_CNTL_MBURST_32_BYTES |
-		    MV64360_PCI_ACC_CNTL_RDSIZE_32_BYTES;
-#endif
-	}
-
-   	/* Lookup host bridge - on CPU 0 - no SMP support */
-   	if (mv64x60_init(&bh, &si)) {
-        	printk("\n\nPCI Bridge initialization failed!\n");
-   	}
-
-	pci_dram_offset = 0;
-	ppc_md.pci_swizzle = common_swizzle;
-	ppc_md.pci_map_irq = chestnut_map_irq;
-	ppc_md.pci_exclude_device = mv64x60_pci_exclude_device;
-
-	mv64x60_set_bus(&bh, 0, 0);
-	bh.hose_a->first_busno = 0;
-	bh.hose_a->last_busno = 0xff;
-	bh.hose_a->last_busno = pciauto_bus_scan(bh.hose_a, 0);
-}
-
-void __init
-chestnut_setup_peripherals(void)
-{
-   	mv64x60_set_32bit_window(&bh, MV64x60_CPU2BOOT_WIN,
-			CHESTNUT_BOOT_8BIT_BASE, CHESTNUT_BOOT_8BIT_SIZE, 0);
-	bh.ci->enable_window_32bit(&bh, MV64x60_CPU2BOOT_WIN);
-
-	mv64x60_set_32bit_window(&bh, MV64x60_CPU2DEV_0_WIN,
-			CHESTNUT_32BIT_BASE, CHESTNUT_32BIT_SIZE, 0);
-	bh.ci->enable_window_32bit(&bh, MV64x60_CPU2DEV_0_WIN);
-
-	mv64x60_set_32bit_window(&bh, MV64x60_CPU2DEV_1_WIN,
-			CHESTNUT_CPLD_BASE, CHESTNUT_CPLD_SIZE, 0);
-	bh.ci->enable_window_32bit(&bh, MV64x60_CPU2DEV_1_WIN);
-	cpld_base = ioremap(CHESTNUT_CPLD_BASE, CHESTNUT_CPLD_SIZE);
-
-	mv64x60_set_32bit_window(&bh, MV64x60_CPU2DEV_2_WIN,
-			CHESTNUT_UART_BASE, CHESTNUT_UART_SIZE, 0);
-	bh.ci->enable_window_32bit(&bh, MV64x60_CPU2DEV_2_WIN);
-
-	mv64x60_set_32bit_window(&bh, MV64x60_CPU2DEV_3_WIN,
-			CHESTNUT_FRAM_BASE, CHESTNUT_FRAM_SIZE, 0);
-	bh.ci->enable_window_32bit(&bh, MV64x60_CPU2DEV_3_WIN);
-
-   	mv64x60_set_32bit_window(&bh, MV64x60_CPU2SRAM_WIN,
-			CHESTNUT_INTERNAL_SRAM_BASE, MV64360_SRAM_SIZE, 0);
-	bh.ci->enable_window_32bit(&bh, MV64x60_CPU2SRAM_WIN);
-
-#ifdef CONFIG_NOT_COHERENT_CACHE
-   	mv64x60_write(&bh, MV64360_SRAM_CONFIG, 0x001600b0);
-#else
-   	mv64x60_write(&bh, MV64360_SRAM_CONFIG, 0x001600b2);
-#endif
-	sram_base = ioremap(CHESTNUT_INTERNAL_SRAM_BASE, MV64360_SRAM_SIZE);
-   	memset(sram_base, 0, MV64360_SRAM_SIZE);
-
-	/*
-	 * Configure MPP pins for PCI DMA
-	 *
-	 * PCI Slot	GNT pin		REQ pin
-	 *	0	MPP16		MPP17
-	 *	1	MPP18		MPP19
-	 *	2	MPP20		MPP21
-	 *	3	MPP22		MPP23
-	 */
-	mv64x60_write(&bh, MV64x60_MPP_CNTL_2,
-			(0x1 << 0)  |	/* MPPSel16 PCI0_GNT[0] */
-			(0x1 << 4)  |	/* MPPSel17 PCI0_REQ[0] */
-			(0x1 << 8)  |	/* MPPSel18 PCI0_GNT[1] */
-			(0x1 << 12) |	/* MPPSel19 PCI0_REQ[1] */
-			(0x1 << 16) |	/* MPPSel20 PCI0_GNT[2] */
-			(0x1 << 20) |	/* MPPSel21 PCI0_REQ[2] */
-			(0x1 << 24) |	/* MPPSel22 PCI0_GNT[3] */
-			(0x1 << 28));	/* MPPSel23 PCI0_REQ[3] */
-	/*
-	 * Set unused MPP pins for output, as per schematic note
-	 *
-	 * Unused Pins: MPP01, MPP02, MPP04, MPP05, MPP06
-	 *		MPP09, MPP10, MPP13, MPP14, MPP15
-	 */
-	mv64x60_clr_bits(&bh, MV64x60_MPP_CNTL_0,
-			(0xf << 4)  |	/* MPPSel01 GPIO[1] */
-			(0xf << 8)  |	/* MPPSel02 GPIO[2] */
-			(0xf << 16) |	/* MPPSel04 GPIO[4] */
-			(0xf << 20) |	/* MPPSel05 GPIO[5] */
-			(0xf << 24));	/* MPPSel06 GPIO[6] */
-	mv64x60_clr_bits(&bh, MV64x60_MPP_CNTL_1,
-			(0xf << 4)  |	/* MPPSel09 GPIO[9] */
-			(0xf << 8)  |	/* MPPSel10 GPIO[10] */
-			(0xf << 20) |	/* MPPSel13 GPIO[13] */
-			(0xf << 24) |	/* MPPSel14 GPIO[14] */
-			(0xf << 28));	/* MPPSel15 GPIO[15] */
-	mv64x60_set_bits(&bh, MV64x60_GPP_IO_CNTL, /* Output */
-			BIT(1)  | BIT(2)  | BIT(4)  | BIT(5)  | BIT(6)  |
-			BIT(9)  | BIT(10) | BIT(13) | BIT(14) | BIT(15));
-
-   	/*
-    	 * Configure the following MPP pins to indicate a level
-    	 * triggered interrupt
-    	 *
-       	 * MPP24 - Board Reset (just map the MPP & GPP for chestnut_reset)
-       	 * MPP25 - UART A  (high)
-       	 * MPP26 - UART B  (high)
-	 * MPP28 - PCI Slot 3 (low)
-	 * MPP29 - PCI Slot 2 (low)
-	 * MPP30 - PCI Slot 1 (low)
-	 * MPP31 - PCI Slot 0 (low)
-    	 */
-        mv64x60_clr_bits(&bh, MV64x60_MPP_CNTL_3,
-                        BIT(3) | BIT(2) | BIT(1) | BIT(0)	 | /* MPP 24 */
-                        BIT(7) | BIT(6) | BIT(5) | BIT(4)	 | /* MPP 25 */
-                        BIT(11) | BIT(10) | BIT(9) | BIT(8)	 | /* MPP 26 */
-			BIT(19) | BIT(18) | BIT(17) | BIT(16)	 | /* MPP 28 */
-			BIT(23) | BIT(22) | BIT(21) | BIT(20)	 | /* MPP 29 */
-			BIT(27) | BIT(26) | BIT(25) | BIT(24)	 | /* MPP 30 */
-			BIT(31) | BIT(30) | BIT(29) | BIT(28));    /* MPP 31 */
-
-   	/*
-	 * Define GPP 25 (high), 26 (high), 28 (low), 29 (low), 30 (low),
-	 * 31 (low) interrupt polarity input signal and level triggered
-    	 */
-   	mv64x60_clr_bits(&bh, MV64x60_GPP_LEVEL_CNTL, BIT(25) | BIT(26));
-   	mv64x60_set_bits(&bh, MV64x60_GPP_LEVEL_CNTL,
-			BIT(28) | BIT(29) | BIT(30) | BIT(31));
-   	mv64x60_clr_bits(&bh, MV64x60_GPP_IO_CNTL,
-			BIT(25) | BIT(26) | BIT(28) | BIT(29) | BIT(30) |
-			BIT(31));
-
-   	/* Config GPP interrupt controller to respond to level trigger */
-   	mv64x60_set_bits(&bh, MV64360_COMM_ARBITER_CNTL, BIT(10));
-
-   	/*
-    	 * Dismiss and then enable interrupt on GPP interrupt cause for CPU #0
-    	 */
-   	mv64x60_write(&bh, MV64x60_GPP_INTR_CAUSE,
-			~(BIT(25) | BIT(26) | BIT(28) | BIT(29) | BIT(30) |
-			  BIT(31)));
-   	mv64x60_set_bits(&bh, MV64x60_GPP_INTR_MASK,
-			BIT(25) | BIT(26) | BIT(28) | BIT(29) | BIT(30) |
-			BIT(31));
-
-   	/*
-    	 * Dismiss and then enable interrupt on CPU #0 high cause register
-    	 * BIT27 summarizes GPP interrupts 24-31
-    	 */
-   	mv64x60_set_bits(&bh, MV64360_IC_CPU0_INTR_MASK_HI, BIT(27));
-
-   	if (ppc_md.progress)
-		ppc_md.progress("chestnut_setup_bridge: exit", 0);
-}
-
-/**************************************************************************
- * FUNCTION: chestnut_setup_arch
- *
- * DESCRIPTION: ppc_md machine configuration callback
- *
- ****/
-static void __init
-chestnut_setup_arch(void)
-{
-	if (ppc_md.progress)
-      		ppc_md.progress("chestnut_setup_arch: enter", 0);
-
-	/* init to some ~sane value until calibrate_delay() runs */
-	loops_per_jiffy = 50000000 / HZ;
-
-   	/* if the time base value is greater than bus freq/4 (the TB and
-    	* decrementer tick rate) + signed integer rollover value, we
-    	* can spend a fair amount of time waiting for the rollover to
-    	* happen.  To get around this, initialize the time base register
-    	* to a "safe" value.
-    	*/
-   	set_tb(0, 0);
-
-#ifdef CONFIG_BLK_DEV_INITRD
-	if (initrd_start)
-		ROOT_DEV = Root_RAM0;
-	else
-#endif
-#ifdef CONFIG_ROOT_NFS
-		ROOT_DEV = Root_NFS;
-#else
-		ROOT_DEV = Root_SDA2;
-#endif
-
-   	/*
-    	* Set up the L2CR register.
-    	*/
- 	_set_L2CR(_get_L2CR() | L2CR_L2E);
-
-	chestnut_setup_bridge();
-	chestnut_setup_peripherals();
-
-#ifdef CONFIG_DUMMY_CONSOLE
-	conswitchp = &dummy_con;
-#endif
-
-#if defined(CONFIG_SERIAL_8250)
-	chestnut_early_serial_map();
-#endif
-
-	/* Identify the system */
-	printk(KERN_INFO "System Identification: IBM 750FX/GX Eval Board\n");
-	printk(KERN_INFO "IBM 750FX/GX port (C) 2004 MontaVista Software, Inc."
-		" (source@mvista.com)\n");
-
-	if (ppc_md.progress)
-      		ppc_md.progress("chestnut_setup_arch: exit", 0);
-}
-
-#ifdef CONFIG_MTD_PHYSMAP
-static struct mtd_partition ptbl;
-
-static int __init
-chestnut_setup_mtd(void)
-{
-	memset(&ptbl, 0, sizeof(ptbl));
-
-	ptbl.name = "User FS";
-	ptbl.size = CHESTNUT_32BIT_SIZE;
-
-	physmap_map.size = CHESTNUT_32BIT_SIZE;
-	physmap_set_partitions(&ptbl, 1);
-	return 0;
-}
-
-arch_initcall(chestnut_setup_mtd);
-#endif
-
-/**************************************************************************
- * FUNCTION: chestnut_restart
- *
- * DESCRIPTION: ppc_md machine reset callback
- *              reset the board via the CPLD command register
- *
- ****/
-static void
-chestnut_restart(char *cmd)
-{
-	volatile ulong i = 10000000;
-
-	local_irq_disable();
-
-        /*
-         * Set CPLD Reg 3 bit 0 to 1 to allow MPP signals on reset to work
-         *
-         * MPP24 - board reset
-         */
-   	writeb(0x1, cpld_base + 3);
-
-	/* GPP pin tied to MPP earlier */
-        mv64x60_set_bits(&bh, MV64x60_GPP_VALUE_SET, BIT(24));
-
-   	while (i-- > 0);
-   	panic("restart failed\n");
-}
-
-static void
-chestnut_halt(void)
-{
-	local_irq_disable();
-	for (;;);
-	/* NOTREACHED */
-}
-
-static void
-chestnut_power_off(void)
-{
-	chestnut_halt();
-	/* NOTREACHED */
-}
-
-/**************************************************************************
- * FUNCTION: chestnut_map_io
- *
- * DESCRIPTION: configure fixed memory-mapped IO
- *
- ****/
-static void __init
-chestnut_map_io(void)
-{
-#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
-	io_block_mapping(CHESTNUT_UART_BASE, CHESTNUT_UART_BASE, 0x100000,
-		_PAGE_IO);
-#endif
-}
-
-/**************************************************************************
- * FUNCTION: chestnut_set_bat
- *
- * DESCRIPTION: configures a (temporary) bat mapping for early access to
- *              device I/O
- *
- ****/
-static __inline__ void
-chestnut_set_bat(void)
-{
-        mb();
-        mtspr(SPRN_DBAT3U, 0xf0001ffe);
-        mtspr(SPRN_DBAT3L, 0xf000002a);
-        mb();
-}
-
-/**************************************************************************
- * FUNCTION: platform_init
- *
- * DESCRIPTION: main entry point for configuring board-specific machine
- *              callbacks
- *
- ****/
-void __init
-platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-	      unsigned long r6, unsigned long r7)
-{
-	parse_bootinfo(find_bootinfo());
-
-        /* Copy the kernel command line arguments to a safe place. */
-
-        if (r6) {
-                *(char *) (r7 + KERNELBASE) = 0;
-                strcpy(cmd_line, (char *) (r6 + KERNELBASE));
-        }
-
-	isa_mem_base = 0;
-
-	ppc_md.setup_arch = chestnut_setup_arch;
-	ppc_md.show_cpuinfo = chestnut_show_cpuinfo;
-	ppc_md.init_IRQ = mv64360_init_irq;
-	ppc_md.get_irq = mv64360_get_irq;
-	ppc_md.init = NULL;
-
-	ppc_md.find_end_of_memory = chestnut_find_end_of_memory;
-	ppc_md.setup_io_mappings  = chestnut_map_io;
-
-	ppc_md.restart = chestnut_restart;
-   	ppc_md.power_off = chestnut_power_off;
-   	ppc_md.halt = chestnut_halt;
-
-	ppc_md.time_init = NULL;
-	ppc_md.set_rtc_time = NULL;
-	ppc_md.get_rtc_time = NULL;
-	ppc_md.calibrate_decr = chestnut_calibrate_decr;
-
-	ppc_md.nvram_read_val = NULL;
-	ppc_md.nvram_write_val = NULL;
-
-	ppc_md.heartbeat = NULL;
-
-	bh.p_base = CONFIG_MV64X60_NEW_BASE;
-
-	chestnut_set_bat();
-
-#if defined(CONFIG_SERIAL_TEXT_DEBUG)
-	ppc_md.progress = gen550_progress;
-#endif
-#if defined(CONFIG_KGDB)
-	ppc_md.kgdb_map_scc = gen550_kgdb_map_scc;
-#endif
-
-	if (ppc_md.progress)
-                ppc_md.progress("chestnut_init(): exit", 0);
-}