summaryrefslogtreecommitdiffstats
path: root/arch/ppc/platforms/lite5200.c
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
committerLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
commit1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch)
tree0bba044c4ce775e45a88a51686b5d9f90697ea9d /arch/ppc/platforms/lite5200.c
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
Diffstat (limited to 'arch/ppc/platforms/lite5200.c')
-rw-r--r--arch/ppc/platforms/lite5200.c236
1 files changed, 236 insertions, 0 deletions
diff --git a/arch/ppc/platforms/lite5200.c b/arch/ppc/platforms/lite5200.c
new file mode 100644
index 00000000000..b604cf8b3ca
--- /dev/null
+++ b/arch/ppc/platforms/lite5200.c
@@ -0,0 +1,236 @@
+/*
+ * arch/ppc/platforms/lite5200.c
+ *
+ * Platform support file for the Freescale LITE5200 based on MPC52xx.
+ * A maximum of this file should be moved to syslib/mpc52xx_?????
+ * so that new platform based on MPC52xx need a minimal platform file
+ * ( avoid code duplication )
+ *
+ *
+ * Maintainer : Sylvain Munaut <tnt@246tNt.com>
+ *
+ * Based on the 2.4 code written by Kent Borg,
+ * Dale Farnsworth <dale.farnsworth@mvista.com> and
+ * Wolfgang Denk <wd@denx.de>
+ *
+ * Copyright 2004-2005 Sylvain Munaut <tnt@246tNt.com>
+ * Copyright 2003 Motorola Inc.
+ * Copyright 2003 MontaVista Software Inc.
+ * Copyright 2003 DENX Software Engineering (wd@denx.de)
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/config.h>
+#include <linux/initrd.h>
+#include <linux/seq_file.h>
+#include <linux/kdev_t.h>
+#include <linux/root_dev.h>
+#include <linux/console.h>
+#include <linux/module.h>
+
+#include <asm/bootinfo.h>
+#include <asm/io.h>
+#include <asm/mpc52xx.h>
+#include <asm/ppc_sys.h>
+
+#include <syslib/mpc52xx_pci.h>
+
+
+extern int powersave_nap;
+
+/* Board data given by U-Boot */
+bd_t __res;
+EXPORT_SYMBOL(__res); /* For modules */
+
+
+/* ======================================================================== */
+/* Platform specific code */
+/* ======================================================================== */
+
+/* Supported PSC function in "preference" order */
+struct mpc52xx_psc_func mpc52xx_psc_functions[] = {
+ { .id = 0,
+ .func = "uart",
+ },
+ { .id = -1, /* End entry */
+ .func = NULL,
+ }
+ };
+
+
+static int
+lite5200_show_cpuinfo(struct seq_file *m)
+{
+ seq_printf(m, "machine\t\t: Freescale LITE5200\n");
+ return 0;
+}
+
+#ifdef CONFIG_PCI
+static int
+lite5200_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
+{
+ return (pin == 1) && (idsel==24) ? MPC52xx_IRQ0 : -1;
+}
+#endif
+
+static void __init
+lite5200_setup_cpu(void)
+{
+ struct mpc52xx_cdm __iomem *cdm;
+ struct mpc52xx_gpio __iomem *gpio;
+ struct mpc52xx_intr __iomem *intr;
+ struct mpc52xx_xlb __iomem *xlb;
+
+ u32 port_config;
+ u32 intr_ctrl;
+
+ /* Map zones */
+ cdm = ioremap(MPC52xx_PA(MPC52xx_CDM_OFFSET), MPC52xx_CDM_SIZE);
+ gpio = ioremap(MPC52xx_PA(MPC52xx_GPIO_OFFSET), MPC52xx_GPIO_SIZE);
+ xlb = ioremap(MPC52xx_PA(MPC52xx_XLB_OFFSET), MPC52xx_XLB_SIZE);
+ intr = ioremap(MPC52xx_PA(MPC52xx_INTR_OFFSET), MPC52xx_INTR_SIZE);
+
+ if (!cdm || !gpio || !xlb || !intr) {
+ printk("lite5200.c: Error while mapping CDM/GPIO/XLB/INTR during"
+ "lite5200_setup_cpu\n");
+ goto unmap_regs;
+ }
+
+ /* Use internal 48 Mhz */
+ out_8(&cdm->ext_48mhz_en, 0x00);
+ out_8(&cdm->fd_enable, 0x01);
+ if (in_be32(&cdm->rstcfg) & 0x40) /* Assumes 33Mhz clock */
+ out_be16(&cdm->fd_counters, 0x0001);
+ else
+ out_be16(&cdm->fd_counters, 0x5555);
+
+ /* Get port mux config */
+ port_config = in_be32(&gpio->port_config);
+
+ /* 48Mhz internal, pin is GPIO */
+ port_config &= ~0x00800000;
+
+ /* USB port */
+ port_config &= ~0x00007000; /* Differential mode - USB1 only */
+ port_config |= 0x00001000;
+
+ /* Commit port config */
+ out_be32(&gpio->port_config, port_config);
+
+ /* Configure the XLB Arbiter */
+ out_be32(&xlb->master_pri_enable, 0xff);
+ out_be32(&xlb->master_priority, 0x11111111);
+
+ /* Enable ram snooping for 1GB window */
+ out_be32(&xlb->config, in_be32(&xlb->config) | MPC52xx_XLB_CFG_SNOOP);
+ out_be32(&xlb->snoop_window, MPC52xx_PCI_TARGET_MEM | 0x1d);
+
+ /* IRQ[0-3] setup : IRQ0 - Level Active Low */
+ /* IRQ[1-3] - Level Active High */
+ intr_ctrl = in_be32(&intr->ctrl);
+ intr_ctrl &= ~0x00ff0000;
+ intr_ctrl |= 0x00c00000;
+ out_be32(&intr->ctrl, intr_ctrl);
+
+ /* Unmap reg zone */
+unmap_regs:
+ if (cdm) iounmap(cdm);
+ if (gpio) iounmap(gpio);
+ if (xlb) iounmap(xlb);
+ if (intr) iounmap(intr);
+}
+
+static void __init
+lite5200_setup_arch(void)
+{
+ /* CPU & Port mux setup */
+ lite5200_setup_cpu();
+
+#ifdef CONFIG_PCI
+ /* PCI Bridge setup */
+ mpc52xx_find_bridges();
+#endif
+}
+
+void __init
+platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
+ unsigned long r6, unsigned long r7)
+{
+ /* Generic MPC52xx platform initialization */
+ /* TODO Create one and move a max of stuff in it.
+ Put this init in the syslib */
+
+ struct bi_record *bootinfo = find_bootinfo();
+
+ if (bootinfo)
+ parse_bootinfo(bootinfo);
+ else {
+ /* Load the bd_t board info structure */
+ if (r3)
+ memcpy((void*)&__res,(void*)(r3+KERNELBASE),
+ sizeof(bd_t));
+
+#ifdef CONFIG_BLK_DEV_INITRD
+ /* Load the initrd */
+ if (r4) {
+ initrd_start = r4 + KERNELBASE;
+ initrd_end = r5 + KERNELBASE;
+ }
+#endif
+
+ /* Load the command line */
+ if (r6) {
+ *(char *)(r7+KERNELBASE) = 0;
+ strcpy(cmd_line, (char *)(r6+KERNELBASE));
+ }
+ }
+
+ /* PPC Sys identification */
+ identify_ppc_sys_by_id(mfspr(SPRN_SVR));
+
+ /* BAT setup */
+ mpc52xx_set_bat();
+
+ /* No ISA bus by default */
+ isa_io_base = 0;
+ isa_mem_base = 0;
+
+ /* Powersave */
+ /* This is provided as an example on how to do it. But you
+ need to be aware that NAP disable bus snoop and that may
+ be required for some devices to work properly, like USB ... */
+ /* powersave_nap = 1; */
+
+
+ /* Setup the ppc_md struct */
+ ppc_md.setup_arch = lite5200_setup_arch;
+ ppc_md.show_cpuinfo = lite5200_show_cpuinfo;
+ ppc_md.show_percpuinfo = NULL;
+ ppc_md.init_IRQ = mpc52xx_init_irq;
+ ppc_md.get_irq = mpc52xx_get_irq;
+
+#ifdef CONFIG_PCI
+ ppc_md.pci_map_irq = lite5200_map_irq;
+#endif
+
+ ppc_md.find_end_of_memory = mpc52xx_find_end_of_memory;
+ ppc_md.setup_io_mappings = mpc52xx_map_io;
+
+ ppc_md.restart = mpc52xx_restart;
+ ppc_md.power_off = mpc52xx_power_off;
+ ppc_md.halt = mpc52xx_halt;
+
+ /* No time keeper on the LITE5200 */
+ ppc_md.time_init = NULL;
+ ppc_md.get_rtc_time = NULL;
+ ppc_md.set_rtc_time = NULL;
+
+ ppc_md.calibrate_decr = mpc52xx_calibrate_decr;
+#ifdef CONFIG_SERIAL_TEXT_DEBUG
+ ppc_md.progress = mpc52xx_progress;
+#endif
+}
+