powerpc: Remove arch/ppc and include/asm-ppc

All the maintained platforms are now in arch/powerpc, so the old
arch/ppc stuff can now go away.

Acked-by: Adrian Bunk <bunk@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Becky Bruce <becky.bruce@freescale.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Jochen Friedrich <jochen@scram.de>
Acked-by: John Linn <john.linn@xilinx.com>
Acked-by: Jon Loeliger <jdl@freescale.com>
Acked-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
Acked-by: Olof Johansson <olof@lixom.net>
Acked-by: Peter Korsgaard <jacmet@sunsite.dk>
Acked-by: Scott Wood <scottwood@freescale.com>
Acked-by: Sean MacLennan <smaclennan@pikatech.com>
Acked-by: Segher Boessenkool <segher@kernel.crashing.org>
Acked-by: Stefan Roese <sr@denx.de>
Acked-by: Stephen Neuendorffer <stephen.neuendorffer@xilinx.com>
Acked-by: Wolfgang Denk <wd@denx.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>

1 files changed, 0 insertions, 310 deletions

diff --git a/arch/ppc/platforms/lopec.c b/arch/ppc/platforms/lopec.c
deleted file mode 100644
index 1e3aa6e9b6c..00000000000
--- a/arch/ppc/platforms/lopec.c
+++ /dev/null
@@ -1,310 +0,0 @@
-/*
- * Setup routines for the Motorola LoPEC.
- *
- * Author: Dan Cox
- * Maintainer: Tom Rini <trini@kernel.crashing.org>
- *
- * 2001-2004 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/types.h>
-#include <linux/delay.h>
-#include <linux/pci_ids.h>
-#include <linux/ioport.h>
-#include <linux/init.h>
-#include <linux/seq_file.h>
-#include <linux/initrd.h>
-#include <linux/console.h>
-#include <linux/root_dev.h>
-#include <linux/pci.h>
-
-#include <asm/machdep.h>
-#include <asm/pci-bridge.h>
-#include <asm/io.h>
-#include <asm/open_pic.h>
-#include <asm/i8259.h>
-#include <asm/todc.h>
-#include <asm/bootinfo.h>
-#include <asm/mpc10x.h>
-#include <asm/hw_irq.h>
-#include <asm/prep_nvram.h>
-#include <asm/kgdb.h>
-
-/*
- * Define all of the IRQ senses and polarities.  Taken from the
- * LoPEC Programmer's Reference Guide.
- */
-static u_char lopec_openpic_initsenses[16] __initdata = {
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* IRQ 0 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* IRQ 1 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* IRQ 2 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* IRQ 3 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* IRQ 4 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* IRQ 5 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* IRQ 6 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* IRQ 7 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* IRQ 8 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* IRQ 9 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* IRQ 10 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* IRQ 11 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* IRQ 12 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* IRQ 13 */
-	(IRQ_SENSE_EDGE | IRQ_POLARITY_NEGATIVE),	/* IRQ 14 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE)	/* IRQ 15 */
-};
-
-static inline int __init
-lopec_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
-	int irq;
-	static char pci_irq_table[][4] = {
-		{16, 0, 0, 0}, /* ID 11 - Winbond */
-		{22, 0, 0, 0}, /* ID 12 - SCSI */
-		{0, 0, 0, 0}, /* ID 13 - nothing */
-		{17, 0, 0, 0}, /* ID 14 - 82559 Ethernet */
-		{27, 0, 0, 0}, /* ID 15 - USB */
-		{23, 0, 0, 0}, /* ID 16 - PMC slot 1 */
-		{24, 0, 0, 0}, /* ID 17 - PMC slot 2 */
-		{25, 0, 0, 0}, /* ID 18 - PCI slot */
-		{0, 0, 0, 0}, /* ID 19 - nothing */
-		{0, 0, 0, 0}, /* ID 20 - nothing */
-		{0, 0, 0, 0}, /* ID 21 - nothing */
-		{0, 0, 0, 0}, /* ID 22 - nothing */
-		{0, 0, 0, 0}, /* ID 23 - nothing */
-		{0, 0, 0, 0}, /* ID 24 - PMC slot 1b */
-		{0, 0, 0, 0}, /* ID 25 - nothing */
-		{0, 0, 0, 0}  /* ID 26 - PMC Slot 2b */
-	};
-	const long min_idsel = 11, max_idsel = 26, irqs_per_slot = 4;
-
-	irq = PCI_IRQ_TABLE_LOOKUP;
-	if (!irq)
-		return 0;
-
-	return irq;
-}
-
-static void __init
-lopec_setup_winbond_83553(struct pci_controller *hose)
-{
-	int devfn;
-
-	devfn = PCI_DEVFN(11,0);
-
-	/* IDE interrupt routing (primary 14, secondary 15) */
-	early_write_config_byte(hose, 0, devfn, 0x43, 0xef);
-	/* PCI interrupt routing */
-	early_write_config_word(hose, 0, devfn, 0x44, 0x0000);
-
-	/* ISA-PCI address decoder */
-	early_write_config_byte(hose, 0, devfn, 0x48, 0xf0);
-
-	/* RTC, kb, not used in PPC */
-	early_write_config_byte(hose, 0, devfn, 0x4d, 0x00);
-	early_write_config_byte(hose, 0, devfn, 0x4e, 0x04);
-	devfn = PCI_DEVFN(11, 1);
-	early_write_config_byte(hose, 0, devfn, 0x09, 0x8f);
-	early_write_config_dword(hose, 0, devfn, 0x40, 0x00ff0011);
-}
-
-static void __init
-lopec_find_bridges(void)
-{
-	struct pci_controller *hose;
-
-	hose = pcibios_alloc_controller();
-	if (!hose)
-		return;
-
-	hose->first_busno = 0;
-	hose->last_busno = 0xff;
-
-	if (mpc10x_bridge_init(hose, MPC10X_MEM_MAP_B, MPC10X_MEM_MAP_B,
-				MPC10X_MAPB_EUMB_BASE) == 0) {
-
-		hose->mem_resources[0].end = 0xffffffff;
-		lopec_setup_winbond_83553(hose);
-		hose->last_busno = pciauto_bus_scan(hose, hose->first_busno);
-		ppc_md.pci_swizzle = common_swizzle;
-		ppc_md.pci_map_irq = lopec_map_irq;
-	}
-}
-
-static int
-lopec_show_cpuinfo(struct seq_file *m)
-{
-	seq_printf(m, "machine\t\t: Motorola LoPEC\n");
-	return 0;
-}
-
-static void
-lopec_restart(char *cmd)
-{
-#define LOPEC_SYSSTAT1 0xffe00000
-	/* force a hard reset, if possible */
-	unsigned char reg = *((unsigned char *) LOPEC_SYSSTAT1);
-	reg |= 0x80;
-	*((unsigned char *) LOPEC_SYSSTAT1) = reg;
-
-	local_irq_disable();
-	while(1);
-#undef LOPEC_SYSSTAT1
-}
-
-static void
-lopec_halt(void)
-{
-	local_irq_disable();
-	while(1);
-}
-
-static void
-lopec_power_off(void)
-{
-	lopec_halt();
-}
-
-static void __init
-lopec_init_IRQ(void)
-{
-	int i;
-
-	/*
-	 * Provide the open_pic code with the correct table of interrupts.
-	 */
-	OpenPIC_InitSenses = lopec_openpic_initsenses;
-	OpenPIC_NumInitSenses = sizeof(lopec_openpic_initsenses);
-
-	mpc10x_set_openpic();
-
-	/* We have a cascade on OpenPIC IRQ 0, Linux IRQ 16 */
-	openpic_hookup_cascade(NUM_8259_INTERRUPTS, "82c59 cascade",
-			&i8259_irq);
-
-	/*
-	 * The EPIC allows for a read in the range of 0xFEF00000 ->
-	 * 0xFEFFFFFF to generate a PCI interrupt-acknowledge transaction.
-	 */
-	i8259_init(0xfef00000, 0);
-}
-
-static int __init
-lopec_request_io(void)
-{
-	outb(0x00, 0x4d0);
-	outb(0xc0, 0x4d1);
-
-	request_region(0x00, 0x20, "dma1");
-	request_region(0x20, 0x20, "pic1");
-	request_region(0x40, 0x20, "timer");
-	request_region(0x80, 0x10, "dma page reg");
-	request_region(0xa0, 0x20, "pic2");
-	request_region(0xc0, 0x20, "dma2");
-
-	return 0;
-}
-
-device_initcall(lopec_request_io);
-
-static void __init
-lopec_map_io(void)
-{
-	io_block_mapping(0xf0000000, 0xf0000000, 0x10000000, _PAGE_IO);
-	io_block_mapping(0xb0000000, 0xb0000000, 0x10000000, _PAGE_IO);
-}
-
-/*
- * Set BAT 3 to map 0xf8000000 to end of physical memory space 1-to-1.
- */
-static __inline__ void
-lopec_set_bat(void)
-{
-	mb();
-	mtspr(SPRN_DBAT1U, 0xf8000ffe);
-	mtspr(SPRN_DBAT1L, 0xf800002a);
-	mb();
-}
-
-TODC_ALLOC();
-
-static void __init
-lopec_setup_arch(void)
-{
-
-	TODC_INIT(TODC_TYPE_MK48T37, 0, 0,
-		  ioremap(0xffe80000, 0x8000), 8);
-
-	loops_per_jiffy = 100000000/HZ;
-
-	lopec_find_bridges();
-
-#ifdef CONFIG_BLK_DEV_INITRD
-	if (initrd_start)
-		ROOT_DEV = Root_RAM0;
-	else
-#elif defined(CONFIG_ROOT_NFS)
-        	ROOT_DEV = Root_NFS;
-#elif defined(CONFIG_BLK_DEV_IDEDISK)
-	        ROOT_DEV = Root_HDA1;
-#else
-        	ROOT_DEV = Root_SDA1;
-#endif
-
-#ifdef CONFIG_PPCBUG_NVRAM
-	/* Read in NVRAM data */
-	init_prep_nvram();
-
-	/* if no bootargs, look in NVRAM */
-	if ( cmd_line[0] == '\0' ) {
-		char *bootargs;
-		 bootargs = prep_nvram_get_var("bootargs");
-		 if (bootargs != NULL) {
-			 strcpy(cmd_line, bootargs);
-			 /* again.. */
-			 strcpy(boot_command_line, cmd_line);
-		}
-	}
-#endif
-}
-
-void __init
-platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-	      unsigned long r6, unsigned long r7)
-{
-	parse_bootinfo(find_bootinfo());
-	lopec_set_bat();
-
-	isa_io_base = MPC10X_MAPB_ISA_IO_BASE;
-	isa_mem_base = MPC10X_MAPB_ISA_MEM_BASE;
-	pci_dram_offset = MPC10X_MAPB_DRAM_OFFSET;
-	ISA_DMA_THRESHOLD = 0x00ffffff;
-	DMA_MODE_READ = 0x44;
-	DMA_MODE_WRITE = 0x48;
-	ppc_do_canonicalize_irqs = 1;
-
-	ppc_md.setup_arch = lopec_setup_arch;
-	ppc_md.show_cpuinfo = lopec_show_cpuinfo;
-	ppc_md.init_IRQ = lopec_init_IRQ;
-	ppc_md.get_irq = openpic_get_irq;
-
-	ppc_md.restart = lopec_restart;
-	ppc_md.power_off = lopec_power_off;
-	ppc_md.halt = lopec_halt;
-
-	ppc_md.setup_io_mappings = lopec_map_io;
-
-	ppc_md.time_init = todc_time_init;
-	ppc_md.set_rtc_time = todc_set_rtc_time;
-	ppc_md.get_rtc_time = todc_get_rtc_time;
-	ppc_md.calibrate_decr = todc_calibrate_decr;
-
-	ppc_md.nvram_read_val = todc_direct_read_val;
-	ppc_md.nvram_write_val = todc_direct_write_val;
-
-#ifdef CONFIG_SERIAL_TEXT_DEBUG
-	ppc_md.progress = gen550_progress;
-#endif
-}