powerpc: Remove arch/ppc and include/asm-ppc

All the maintained platforms are now in arch/powerpc, so the old
arch/ppc stuff can now go away.

Acked-by: Adrian Bunk <bunk@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Becky Bruce <becky.bruce@freescale.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Jochen Friedrich <jochen@scram.de>
Acked-by: John Linn <john.linn@xilinx.com>
Acked-by: Jon Loeliger <jdl@freescale.com>
Acked-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
Acked-by: Olof Johansson <olof@lixom.net>
Acked-by: Peter Korsgaard <jacmet@sunsite.dk>
Acked-by: Scott Wood <scottwood@freescale.com>
Acked-by: Sean MacLennan <smaclennan@pikatech.com>
Acked-by: Segher Boessenkool <segher@kernel.crashing.org>
Acked-by: Stefan Roese <sr@denx.de>
Acked-by: Stephen Neuendorffer <stephen.neuendorffer@xilinx.com>
Acked-by: Wolfgang Denk <wd@denx.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>

1 files changed, 0 insertions, 340 deletions

diff --git a/arch/ppc/platforms/mvme5100.c b/arch/ppc/platforms/mvme5100.c
deleted file mode 100644
index 053b54ac88f..00000000000
--- a/arch/ppc/platforms/mvme5100.c
+++ /dev/null
@@ -1,340 +0,0 @@
-/*
- * Board setup routines for the Motorola MVME5100.
- *
- * Author: Matt Porter <mporter@mvista.com>
- *
- * 2001-2004 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/stddef.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/pci.h>
-#include <linux/initrd.h>
-#include <linux/console.h>
-#include <linux/delay.h>
-#include <linux/seq_file.h>
-#include <linux/kdev_t.h>
-#include <linux/root_dev.h>
-
-#include <asm/system.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/dma.h>
-#include <asm/io.h>
-#include <asm/machdep.h>
-#include <asm/open_pic.h>
-#include <asm/i8259.h>
-#include <asm/todc.h>
-#include <asm/pci-bridge.h>
-#include <asm/bootinfo.h>
-#include <asm/hawk.h>
-
-#include <platforms/pplus.h>
-#include <platforms/mvme5100.h>
-
-static u_char mvme5100_openpic_initsenses[16] __initdata = {
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* i8259 cascade */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* TL16C550 UART 1,2 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Enet1 front panel or P2 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Hawk Watchdog 1,2 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* DS1621 thermal alarm */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Universe II LINT0# */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Universe II LINT1# */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Universe II LINT2# */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Universe II LINT3# */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* PMC1 INTA#, PMC2 INTB# */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* PMC1 INTB#, PMC2 INTC# */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* PMC1 INTC#, PMC2 INTD# */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* PMC1 INTD#, PMC2 INTA# */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Enet 2 (front panel) */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Abort Switch */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* RTC Alarm */
-};
-
-static inline int
-mvme5100_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
-	int irq;
-
-	static char pci_irq_table[][4] =
-	/*
-	 *	PCI IDSEL/INTPIN->INTLINE
-	 * 	   A   B   C   D
-	 */
-	{
-		{  0,  0,  0,  0 },	/* IDSEL 11 - Winbond */
-		{  0,  0,  0,  0 },	/* IDSEL 12 - unused */
-		{ 21, 22, 23, 24 },	/* IDSEL 13 - Universe II */
-		{ 18,  0,  0,  0 },	/* IDSEL 14 - Enet 1 */
-		{  0,  0,  0,  0 },	/* IDSEL 15 - unused */
-		{ 25, 26, 27, 28 },	/* IDSEL 16 - PMC Slot 1 */
-		{ 28, 25, 26, 27 },	/* IDSEL 17 - PMC Slot 2 */
-		{  0,  0,  0,  0 },	/* IDSEL 18 - unused */
-		{ 29,  0,  0,  0 },	/* IDSEL 19 - Enet 2 */
-		{  0,  0,  0,  0 },	/* IDSEL 20 - PMCSPAN */
-	};
-
-	const long min_idsel = 11, max_idsel = 20, irqs_per_slot = 4;
-	irq = PCI_IRQ_TABLE_LOOKUP;
-	/* If lookup is zero, always return 0 */
-	if (!irq)
-		return 0;
-	else
-#ifdef CONFIG_MVME5100_IPMC761_PRESENT
-	/* If IPMC761 present, return table value */
-	return irq;
-#else
-	/* If IPMC761 not present, we don't have an i8259 so adjust */
-	return (irq - NUM_8259_INTERRUPTS);
-#endif
-}
-
-static void
-mvme5100_pcibios_fixup_resources(struct pci_dev *dev)
-{
-	int i;
-
-	if ((dev->vendor == PCI_VENDOR_ID_MOTOROLA) &&
-			(dev->device == PCI_DEVICE_ID_MOTOROLA_HAWK))
-		for (i=0; i<DEVICE_COUNT_RESOURCE; i++)
-		{
-			dev->resource[i].start = 0;
-			dev->resource[i].end = 0;
-		}
-}
-
-static void __init
-mvme5100_setup_bridge(void)
-{
-	struct pci_controller*	hose;
-
-	hose = pcibios_alloc_controller();
-
-	if (!hose)
-		return;
-
-	hose->first_busno = 0;
-	hose->last_busno = 0xff;
-	hose->pci_mem_offset = MVME5100_PCI_MEM_OFFSET;
-
-	pci_init_resource(&hose->io_resource, MVME5100_PCI_LOWER_IO,
-			MVME5100_PCI_UPPER_IO, IORESOURCE_IO,
-			"PCI host bridge");
-
-	pci_init_resource(&hose->mem_resources[0], MVME5100_PCI_LOWER_MEM,
-			MVME5100_PCI_UPPER_MEM, IORESOURCE_MEM,
-			"PCI host bridge");
-
-	hose->io_space.start = MVME5100_PCI_LOWER_IO;
-	hose->io_space.end = MVME5100_PCI_UPPER_IO;
-	hose->mem_space.start = MVME5100_PCI_LOWER_MEM;
-	hose->mem_space.end = MVME5100_PCI_UPPER_MEM;
-	hose->io_base_virt = (void *)MVME5100_ISA_IO_BASE;
-
-	/* Use indirect method of Hawk */
-	setup_indirect_pci(hose, MVME5100_PCI_CONFIG_ADDR,
-			MVME5100_PCI_CONFIG_DATA);
-
-	hose->last_busno = pciauto_bus_scan(hose, hose->first_busno);
-
-	ppc_md.pcibios_fixup_resources = mvme5100_pcibios_fixup_resources;
-	ppc_md.pci_swizzle = common_swizzle;
-	ppc_md.pci_map_irq = mvme5100_map_irq;
-}
-
-static void __init
-mvme5100_setup_arch(void)
-{
-	if ( ppc_md.progress )
-		ppc_md.progress("mvme5100_setup_arch: enter", 0);
-
-	loops_per_jiffy = 50000000 / HZ;
-
-#ifdef CONFIG_BLK_DEV_INITRD
-	if (initrd_start)
-		ROOT_DEV = Root_RAM0;
-	else
-#endif
-#ifdef	CONFIG_ROOT_NFS
-		ROOT_DEV = Root_NFS;
-#else
-		ROOT_DEV = Root_SDA2;
-#endif
-
-	if ( ppc_md.progress )
-		ppc_md.progress("mvme5100_setup_arch: find_bridges", 0);
-
-	/* Setup PCI host bridge */
-	mvme5100_setup_bridge();
-
-	/* Find and map our OpenPIC */
-	hawk_mpic_init(MVME5100_PCI_MEM_OFFSET);
-	OpenPIC_InitSenses = mvme5100_openpic_initsenses;
-	OpenPIC_NumInitSenses = sizeof(mvme5100_openpic_initsenses);
-
-	printk("MVME5100 port (C) 2001 MontaVista Software, Inc. (source@mvista.com)\n");
-
-	if ( ppc_md.progress )
-		ppc_md.progress("mvme5100_setup_arch: exit", 0);
-
-	return;
-}
-
-static void __init
-mvme5100_init2(void)
-{
-#ifdef CONFIG_MVME5100_IPMC761_PRESENT
-		request_region(0x00,0x20,"dma1");
-		request_region(0x20,0x20,"pic1");
-		request_region(0x40,0x20,"timer");
-		request_region(0x80,0x10,"dma page reg");
-		request_region(0xa0,0x20,"pic2");
-		request_region(0xc0,0x20,"dma2");
-#endif
-	return;
-}
-
-/*
- * Interrupt setup and service.
- * Have MPIC on HAWK and cascaded 8259s on Winbond cascaded to MPIC.
- */
-static void __init
-mvme5100_init_IRQ(void)
-{
-#ifdef CONFIG_MVME5100_IPMC761_PRESENT
-	int i;
-#endif
-
-	if ( ppc_md.progress )
-		ppc_md.progress("init_irq: enter", 0);
-
-	openpic_set_sources(0, 16, OpenPIC_Addr + 0x10000);
-#ifdef CONFIG_MVME5100_IPMC761_PRESENT
-	openpic_init(NUM_8259_INTERRUPTS);
-	openpic_hookup_cascade(NUM_8259_INTERRUPTS, "82c59 cascade",
-			&i8259_irq);
-
-	i8259_init(0, 0);
-#else
-	openpic_init(0);
-#endif
-
-	if ( ppc_md.progress )
-		ppc_md.progress("init_irq: exit", 0);
-
-	return;
-}
-
-/*
- * Set BAT 3 to map 0xf0000000 to end of physical memory space.
- */
-static __inline__ void
-mvme5100_set_bat(void)
-{
-	mb();
-	mtspr(SPRN_DBAT1U, 0xf0001ffe);
-	mtspr(SPRN_DBAT1L, 0xf000002a);
-	mb();
-}
-
-static unsigned long __init
-mvme5100_find_end_of_memory(void)
-{
-	return hawk_get_mem_size(MVME5100_HAWK_SMC_BASE);
-}
-
-static void __init
-mvme5100_map_io(void)
-{
-	io_block_mapping(0xfe000000, 0xfe000000, 0x02000000, _PAGE_IO);
-	ioremap_base = 0xfe000000;
-}
-
-static void
-mvme5100_reset_board(void)
-{
-	local_irq_disable();
-
-	/* Set exception prefix high - to the firmware */
-	_nmask_and_or_msr(0, MSR_IP);
-
-	out_8((u_char *)MVME5100_BOARD_MODRST_REG, 0x01);
-
-	return;
-}
-
-static void
-mvme5100_restart(char *cmd)
-{
-	volatile ulong i = 10000000;
-
-	mvme5100_reset_board();
-
-	while (i-- > 0);
-	panic("restart failed\n");
-}
-
-static void
-mvme5100_halt(void)
-{
-	local_irq_disable();
-	while (1);
-}
-
-static void
-mvme5100_power_off(void)
-{
-	mvme5100_halt();
-}
-
-static int
-mvme5100_show_cpuinfo(struct seq_file *m)
-{
-	seq_printf(m, "vendor\t\t: Motorola\n");
-	seq_printf(m, "machine\t\t: MVME5100\n");
-
-	return 0;
-}
-
-TODC_ALLOC();
-
-void __init
-platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-	      unsigned long r6, unsigned long r7)
-{
-	parse_bootinfo(find_bootinfo());
-	mvme5100_set_bat();
-
-	isa_io_base = MVME5100_ISA_IO_BASE;
-	isa_mem_base = MVME5100_ISA_MEM_BASE;
-	pci_dram_offset = MVME5100_PCI_DRAM_OFFSET;
-
-	ppc_md.setup_arch = mvme5100_setup_arch;
-	ppc_md.show_cpuinfo = mvme5100_show_cpuinfo;
-	ppc_md.init_IRQ = mvme5100_init_IRQ;
-	ppc_md.get_irq = openpic_get_irq;
-	ppc_md.init = mvme5100_init2;
-
-	ppc_md.restart = mvme5100_restart;
-	ppc_md.power_off = mvme5100_power_off;
-	ppc_md.halt = mvme5100_halt;
-
-	ppc_md.find_end_of_memory = mvme5100_find_end_of_memory;
-	ppc_md.setup_io_mappings = mvme5100_map_io;
-
-	TODC_INIT(TODC_TYPE_MK48T37, MVME5100_NVRAM_AS0, MVME5100_NVRAM_AS1,
-			MVME5100_NVRAM_DATA, 8);
-
-	ppc_md.time_init = todc_time_init;
-	ppc_md.set_rtc_time = todc_set_rtc_time;
-	ppc_md.get_rtc_time = todc_get_rtc_time;
-	ppc_md.calibrate_decr = todc_calibrate_decr;
-
-	ppc_md.nvram_read_val = todc_m48txx_read_val;
-	ppc_md.nvram_write_val = todc_m48txx_write_val;
-}