Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 1125 insertions, 0 deletions

diff --git a/arch/ppc/platforms/pmac_pci.c b/arch/ppc/platforms/pmac_pci.c
new file mode 100644
index 00000000000..f6ff5192406
--- /dev/null
+++ b/arch/ppc/platforms/pmac_pci.c
@@ -0,0 +1,1125 @@
+/*
+ * Support for PCI bridges found on Power Macintoshes.
+ * At present the "bandit" and "chaos" bridges are supported.
+ * Fortunately you access configuration space in the same
+ * way with either bridge.
+ *
+ * Copyright (C) 1997 Paul Mackerras (paulus@cs.anu.edu.au)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/string.h>
+#include <linux/init.h>
+#include <linux/bootmem.h>
+
+#include <asm/sections.h>
+#include <asm/io.h>
+#include <asm/prom.h>
+#include <asm/pci-bridge.h>
+#include <asm/machdep.h>
+#include <asm/pmac_feature.h>
+
+#undef DEBUG
+
+#ifdef DEBUG
+#ifdef CONFIG_XMON
+extern void xmon_printf(const char *fmt, ...);
+#define DBG(x...) xmon_printf(x)
+#else
+#define DBG(x...) printk(x)
+#endif
+#else
+#define DBG(x...)
+#endif
+
+static int add_bridge(struct device_node *dev);
+extern void pmac_check_ht_link(void);
+
+/* XXX Could be per-controller, but I don't think we risk anything by
+ * assuming we won't have both UniNorth and Bandit */
+static int has_uninorth;
+#ifdef CONFIG_POWER4
+static struct pci_controller *u3_agp;
+#endif /* CONFIG_POWER4 */
+
+extern u8 pci_cache_line_size;
+extern int pcibios_assign_bus_offset;
+
+struct device_node *k2_skiplist[2];
+
+/*
+ * Magic constants for enabling cache coherency in the bandit/PSX bridge.
+ */
+#define BANDIT_DEVID_2	8
+#define BANDIT_REVID	3
+
+#define BANDIT_DEVNUM	11
+#define BANDIT_MAGIC	0x50
+#define BANDIT_COHERENT	0x40
+
+static int __init
+fixup_one_level_bus_range(struct device_node *node, int higher)
+{
+	for (; node != 0;node = node->sibling) {
+		int * bus_range;
+		unsigned int *class_code;
+		int len;
+
+		/* For PCI<->PCI bridges or CardBus bridges, we go down */
+		class_code = (unsigned int *) get_property(node, "class-code", NULL);
+		if (!class_code || ((*class_code >> 8) != PCI_CLASS_BRIDGE_PCI &&
+			(*class_code >> 8) != PCI_CLASS_BRIDGE_CARDBUS))
+			continue;
+		bus_range = (int *) get_property(node, "bus-range", &len);
+		if (bus_range != NULL && len > 2 * sizeof(int)) {
+			if (bus_range[1] > higher)
+				higher = bus_range[1];
+		}
+		higher = fixup_one_level_bus_range(node->child, higher);
+	}
+	return higher;
+}
+
+/* This routine fixes the "bus-range" property of all bridges in the
+ * system since they tend to have their "last" member wrong on macs
+ *
+ * Note that the bus numbers manipulated here are OF bus numbers, they
+ * are not Linux bus numbers.
+ */
+static void __init
+fixup_bus_range(struct device_node *bridge)
+{
+	int * bus_range;
+	int len;
+
+	/* Lookup the "bus-range" property for the hose */
+	bus_range = (int *) get_property(bridge, "bus-range", &len);
+	if (bus_range == NULL || len < 2 * sizeof(int)) {
+		printk(KERN_WARNING "Can't get bus-range for %s\n",
+			       bridge->full_name);
+		return;
+	}
+	bus_range[1] = fixup_one_level_bus_range(bridge->child, bus_range[1]);
+}
+
+/*
+ * Apple MacRISC (U3, UniNorth, Bandit, Chaos) PCI controllers.
+ *
+ * The "Bandit" version is present in all early PCI PowerMacs,
+ * and up to the first ones using Grackle. Some machines may
+ * have 2 bandit controllers (2 PCI busses).
+ *
+ * "Chaos" is used in some "Bandit"-type machines as a bridge
+ * for the separate display bus. It is accessed the same
+ * way as bandit, but cannot be probed for devices. It therefore
+ * has its own config access functions.
+ *
+ * The "UniNorth" version is present in all Core99 machines
+ * (iBook, G4, new IMacs, and all the recent Apple machines).
+ * It contains 3 controllers in one ASIC.
+ *
+ * The U3 is the bridge used on G5 machines. It contains an
+ * AGP bus which is dealt with the old UniNorth access routines
+ * and a HyperTransport bus which uses its own set of access
+ * functions.
+ */
+
+#define MACRISC_CFA0(devfn, off)	\
+	((1 << (unsigned long)PCI_SLOT(dev_fn)) \
+	| (((unsigned long)PCI_FUNC(dev_fn)) << 8) \
+	| (((unsigned long)(off)) & 0xFCUL))
+
+#define MACRISC_CFA1(bus, devfn, off)	\
+	((((unsigned long)(bus)) << 16) \
+	|(((unsigned long)(devfn)) << 8) \
+	|(((unsigned long)(off)) & 0xFCUL) \
+	|1UL)
+
+static void volatile __iomem * __pmac
+macrisc_cfg_access(struct pci_controller* hose, u8 bus, u8 dev_fn, u8 offset)
+{
+	unsigned int caddr;
+
+	if (bus == hose->first_busno) {
+		if (dev_fn < (11 << 3))
+			return NULL;
+		caddr = MACRISC_CFA0(dev_fn, offset);
+	} else
+		caddr = MACRISC_CFA1(bus, dev_fn, offset);
+
+	/* Uninorth will return garbage if we don't read back the value ! */
+	do {
+		out_le32(hose->cfg_addr, caddr);
+	} while (in_le32(hose->cfg_addr) != caddr);
+
+	offset &= has_uninorth ? 0x07 : 0x03;
+	return hose->cfg_data + offset;
+}
+
+static int __pmac
+macrisc_read_config(struct pci_bus *bus, unsigned int devfn, int offset,
+		    int len, u32 *val)
+{
+	struct pci_controller *hose = bus->sysdata;
+	void volatile __iomem *addr;
+
+	addr = macrisc_cfg_access(hose, bus->number, devfn, offset);
+	if (!addr)
+		return PCIBIOS_DEVICE_NOT_FOUND;
+	/*
+	 * Note: the caller has already checked that offset is
+	 * suitably aligned and that len is 1, 2 or 4.
+	 */
+	switch (len) {
+	case 1:
+		*val = in_8(addr);
+		break;
+	case 2:
+		*val = in_le16(addr);
+		break;
+	default:
+		*val = in_le32(addr);
+		break;
+	}
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static int __pmac
+macrisc_write_config(struct pci_bus *bus, unsigned int devfn, int offset,
+		     int len, u32 val)
+{
+	struct pci_controller *hose = bus->sysdata;
+	void volatile __iomem *addr;
+
+	addr = macrisc_cfg_access(hose, bus->number, devfn, offset);
+	if (!addr)
+		return PCIBIOS_DEVICE_NOT_FOUND;
+	/*
+	 * Note: the caller has already checked that offset is
+	 * suitably aligned and that len is 1, 2 or 4.
+	 */
+	switch (len) {
+	case 1:
+		out_8(addr, val);
+		(void) in_8(addr);
+		break;
+	case 2:
+		out_le16(addr, val);
+		(void) in_le16(addr);
+		break;
+	default:
+		out_le32(addr, val);
+		(void) in_le32(addr);
+		break;
+	}
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static struct pci_ops macrisc_pci_ops =
+{
+	macrisc_read_config,
+	macrisc_write_config
+};
+
+/*
+ * Verifiy that a specific (bus, dev_fn) exists on chaos
+ */
+static int __pmac
+chaos_validate_dev(struct pci_bus *bus, int devfn, int offset)
+{
+	struct device_node *np;
+	u32 *vendor, *device;
+
+	np = pci_busdev_to_OF_node(bus, devfn);
+	if (np == NULL)
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	vendor = (u32 *)get_property(np, "vendor-id", NULL);
+	device = (u32 *)get_property(np, "device-id", NULL);
+	if (vendor == NULL || device == NULL)
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	if ((*vendor == 0x106b) && (*device == 3) && (offset >= 0x10)
+	    && (offset != 0x14) && (offset != 0x18) && (offset <= 0x24))
+		return PCIBIOS_BAD_REGISTER_NUMBER;
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static int __pmac
+chaos_read_config(struct pci_bus *bus, unsigned int devfn, int offset,
+		  int len, u32 *val)
+{
+	int result = chaos_validate_dev(bus, devfn, offset);
+	if (result == PCIBIOS_BAD_REGISTER_NUMBER)
+		*val = ~0U;
+	if (result != PCIBIOS_SUCCESSFUL)
+		return result;
+	return macrisc_read_config(bus, devfn, offset, len, val);
+}
+
+static int __pmac
+chaos_write_config(struct pci_bus *bus, unsigned int devfn, int offset,
+		   int len, u32 val)
+{
+	int result = chaos_validate_dev(bus, devfn, offset);
+	if (result != PCIBIOS_SUCCESSFUL)
+		return result;
+	return macrisc_write_config(bus, devfn, offset, len, val);
+}
+
+static struct pci_ops chaos_pci_ops =
+{
+	chaos_read_config,
+	chaos_write_config
+};
+
+#ifdef CONFIG_POWER4
+
+/*
+ * These versions of U3 HyperTransport config space access ops do not
+ * implement self-view of the HT host yet
+ */
+
+#define U3_HT_CFA0(devfn, off)		\
+		((((unsigned long)devfn) << 8) | offset)
+#define U3_HT_CFA1(bus, devfn, off)	\
+		(U3_HT_CFA0(devfn, off) \
+		+ (((unsigned long)bus) << 16) \
+		+ 0x01000000UL)
+
+static void volatile __iomem * __pmac
+u3_ht_cfg_access(struct pci_controller* hose, u8 bus, u8 devfn, u8 offset)
+{
+	if (bus == hose->first_busno) {
+		/* For now, we don't self probe U3 HT bridge */
+		if (PCI_FUNC(devfn) != 0 || PCI_SLOT(devfn) > 7 ||
+		    PCI_SLOT(devfn) < 1)
+			return 0;
+		return hose->cfg_data + U3_HT_CFA0(devfn, offset);
+	} else
+		return hose->cfg_data + U3_HT_CFA1(bus, devfn, offset);
+}
+
+static int __pmac
+u3_ht_read_config(struct pci_bus *bus, unsigned int devfn, int offset,
+		    int len, u32 *val)
+{
+	struct pci_controller *hose = bus->sysdata;
+	void volatile __iomem *addr;
+	int i;
+
+	struct device_node *np = pci_busdev_to_OF_node(bus, devfn);
+	if (np == NULL)
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	/*
+	 * When a device in K2 is powered down, we die on config
+	 * cycle accesses. Fix that here.
+	 */
+	for (i=0; i<2; i++)
+		if (k2_skiplist[i] == np) {
+			switch (len) {
+			case 1:
+				*val = 0xff; break;
+			case 2:
+				*val = 0xffff; break;
+			default:
+				*val = 0xfffffffful; break;
+			}
+			return PCIBIOS_SUCCESSFUL;
+		}
+	    
+	addr = u3_ht_cfg_access(hose, bus->number, devfn, offset);
+	if (!addr)
+		return PCIBIOS_DEVICE_NOT_FOUND;
+	/*
+	 * Note: the caller has already checked that offset is
+	 * suitably aligned and that len is 1, 2 or 4.
+	 */
+	switch (len) {
+	case 1:
+		*val = in_8(addr);
+		break;
+	case 2:
+		*val = in_le16(addr);
+		break;
+	default:
+		*val = in_le32(addr);
+		break;
+	}
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static int __pmac
+u3_ht_write_config(struct pci_bus *bus, unsigned int devfn, int offset,
+		     int len, u32 val)
+{
+	struct pci_controller *hose = bus->sysdata;
+	void volatile __iomem *addr;
+	int i;
+
+	struct device_node *np = pci_busdev_to_OF_node(bus, devfn);
+	if (np == NULL)
+		return PCIBIOS_DEVICE_NOT_FOUND;
+	/*
+	 * When a device in K2 is powered down, we die on config
+	 * cycle accesses. Fix that here.
+	 */
+	for (i=0; i<2; i++)
+		if (k2_skiplist[i] == np)
+			return PCIBIOS_SUCCESSFUL;
+
+	addr = u3_ht_cfg_access(hose, bus->number, devfn, offset);
+	if (!addr)
+		return PCIBIOS_DEVICE_NOT_FOUND;
+	/*
+	 * Note: the caller has already checked that offset is
+	 * suitably aligned and that len is 1, 2 or 4.
+	 */
+	switch (len) {
+	case 1:
+		out_8(addr, val);
+		(void) in_8(addr);
+		break;
+	case 2:
+		out_le16(addr, val);
+		(void) in_le16(addr);
+		break;
+	default:
+		out_le32(addr, val);
+		(void) in_le32(addr);
+		break;
+	}
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static struct pci_ops u3_ht_pci_ops =
+{
+	u3_ht_read_config,
+	u3_ht_write_config
+};
+
+#endif /* CONFIG_POWER4 */
+
+/*
+ * For a bandit bridge, turn on cache coherency if necessary.
+ * N.B. we could clean this up using the hose ops directly.
+ */
+static void __init
+init_bandit(struct pci_controller *bp)
+{
+	unsigned int vendev, magic;
+	int rev;
+
+	/* read the word at offset 0 in config space for device 11 */
+	out_le32(bp->cfg_addr, (1UL << BANDIT_DEVNUM) + PCI_VENDOR_ID);
+	udelay(2);
+	vendev = in_le32(bp->cfg_data);
+	if (vendev == (PCI_DEVICE_ID_APPLE_BANDIT << 16) +
+			PCI_VENDOR_ID_APPLE) {
+		/* read the revision id */
+		out_le32(bp->cfg_addr,
+			 (1UL << BANDIT_DEVNUM) + PCI_REVISION_ID);
+		udelay(2);
+		rev = in_8(bp->cfg_data);
+		if (rev != BANDIT_REVID)
+			printk(KERN_WARNING
+			       "Unknown revision %d for bandit\n", rev);
+	} else if (vendev != (BANDIT_DEVID_2 << 16) + PCI_VENDOR_ID_APPLE) {
+		printk(KERN_WARNING "bandit isn't? (%x)\n", vendev);
+		return;
+	}
+
+	/* read the word at offset 0x50 */
+	out_le32(bp->cfg_addr, (1UL << BANDIT_DEVNUM) + BANDIT_MAGIC);
+	udelay(2);
+	magic = in_le32(bp->cfg_data);
+	if ((magic & BANDIT_COHERENT) != 0)
+		return;
+	magic |= BANDIT_COHERENT;
+	udelay(2);
+	out_le32(bp->cfg_data, magic);
+	printk(KERN_INFO "Cache coherency enabled for bandit/PSX\n");
+}
+
+
+/*
+ * Tweak the PCI-PCI bridge chip on the blue & white G3s.
+ */
+static void __init
+init_p2pbridge(void)
+{
+	struct device_node *p2pbridge;
+	struct pci_controller* hose;
+	u8 bus, devfn;
+	u16 val;
+
+	/* XXX it would be better here to identify the specific
+	   PCI-PCI bridge chip we have. */
+	if ((p2pbridge = find_devices("pci-bridge")) == 0
+	    || p2pbridge->parent == NULL
+	    || strcmp(p2pbridge->parent->name, "pci") != 0)
+		return;
+	if (pci_device_from_OF_node(p2pbridge, &bus, &devfn) < 0) {
+		DBG("Can't find PCI infos for PCI<->PCI bridge\n");
+		return;
+	}
+	/* Warning: At this point, we have not yet renumbered all busses.
+	 * So we must use OF walking to find out hose
+	 */
+	hose = pci_find_hose_for_OF_device(p2pbridge);
+	if (!hose) {
+		DBG("Can't find hose for PCI<->PCI bridge\n");
+		return;
+	}
+	if (early_read_config_word(hose, bus, devfn,
+				   PCI_BRIDGE_CONTROL, &val) < 0) {
+		printk(KERN_ERR "init_p2pbridge: couldn't read bridge control\n");
+		return;
+	}
+	val &= ~PCI_BRIDGE_CTL_MASTER_ABORT;
+	early_write_config_word(hose, bus, devfn, PCI_BRIDGE_CONTROL, val);
+}
+
+/*
+ * Some Apple desktop machines have a NEC PD720100A USB2 controller
+ * on the motherboard. Open Firmware, on these, will disable the
+ * EHCI part of it so it behaves like a pair of OHCI's. This fixup
+ * code re-enables it ;)
+ */
+static void __init
+fixup_nec_usb2(void)
+{
+	struct device_node *nec;
+
+	for (nec = NULL; (nec = of_find_node_by_name(nec, "usb")) != NULL;) {
+		struct pci_controller *hose;
+		u32 data, *prop;
+		u8 bus, devfn;
+		
+		prop = (u32 *)get_property(nec, "vendor-id", NULL);
+		if (prop == NULL)
+			continue;
+		if (0x1033 != *prop)
+			continue;
+		prop = (u32 *)get_property(nec, "device-id", NULL);
+		if (prop == NULL)
+			continue;
+		if (0x0035 != *prop)
+			continue;
+		prop = (u32 *)get_property(nec, "reg", NULL);
+		if (prop == NULL)
+			continue;
+		devfn = (prop[0] >> 8) & 0xff;
+		bus = (prop[0] >> 16) & 0xff;
+		if (PCI_FUNC(devfn) != 0)
+			continue;
+		hose = pci_find_hose_for_OF_device(nec);
+		if (!hose)
+			continue;
+		early_read_config_dword(hose, bus, devfn, 0xe4, &data);
+		if (data & 1UL) {
+			printk("Found NEC PD720100A USB2 chip with disabled EHCI, fixing up...\n");
+			data &= ~1UL;
+			early_write_config_dword(hose, bus, devfn, 0xe4, data);
+			early_write_config_byte(hose, bus, devfn | 2, PCI_INTERRUPT_LINE,
+				nec->intrs[0].line);
+		}
+	}
+}
+
+void __init
+pmac_find_bridges(void)
+{
+	struct device_node *np, *root;
+	struct device_node *ht = NULL;
+
+	root = of_find_node_by_path("/");
+	if (root == NULL) {
+		printk(KERN_CRIT "pmac_find_bridges: can't find root of device tree\n");
+		return;
+	}
+	for (np = NULL; (np = of_get_next_child(root, np)) != NULL;) {
+		if (np->name == NULL)
+			continue;
+		if (strcmp(np->name, "bandit") == 0
+		    || strcmp(np->name, "chaos") == 0
+		    || strcmp(np->name, "pci") == 0) {
+			if (add_bridge(np) == 0)
+				of_node_get(np);
+		}
+		if (strcmp(np->name, "ht") == 0) {
+			of_node_get(np);
+			ht = np;
+		}
+	}
+	of_node_put(root);
+
+	/* Probe HT last as it relies on the agp resources to be already
+	 * setup
+	 */
+	if (ht && add_bridge(ht) != 0)
+		of_node_put(ht);
+
+	init_p2pbridge();
+	fixup_nec_usb2();
+	
+	/* We are still having some issues with the Xserve G4, enabling
+	 * some offset between bus number and domains for now when we
+	 * assign all busses should help for now
+	 */
+	if (pci_assign_all_busses)
+		pcibios_assign_bus_offset = 0x10;
+
+#ifdef CONFIG_POWER4 
+	/* There is something wrong with DMA on U3/HT. I haven't figured out
+	 * the details yet, but if I set the cache line size to 128 bytes like
+	 * it should, I'm getting memory corruption caused by devices like
+	 * sungem (even without the MWI bit set, but maybe sungem doesn't
+	 * care). Right now, it appears that setting up a 64 bytes line size
+	 * works properly, 64 bytes beeing the max transfer size of HT, I
+	 * suppose this is related the way HT/PCI are hooked together. I still
+	 * need to dive into more specs though to be really sure of what's
+	 * going on. --BenH.
+	 *
+	 * Ok, apparently, it's just that HT can't do more than 64 bytes
+	 * transactions. MWI seem to be meaningless there as well, it may
+	 * be worth nop'ing out pci_set_mwi too though I haven't done that
+	 * yet.
+	 *
+	 * Note that it's a bit different for whatever is in the AGP slot.
+	 * For now, I don't care, but this can become a real issue, we
+	 * should probably hook pci_set_mwi anyway to make sure it sets
+	 * the real cache line size in there.
+	 */
+	if (machine_is_compatible("MacRISC4"))
+		pci_cache_line_size = 16; /* 64 bytes */
+
+	pmac_check_ht_link();
+#endif /* CONFIG_POWER4 */
+}
+
+#define GRACKLE_CFA(b, d, o)	(0x80 | ((b) << 8) | ((d) << 16) \
+				 | (((o) & ~3) << 24))
+
+#define GRACKLE_PICR1_STG		0x00000040
+#define GRACKLE_PICR1_LOOPSNOOP		0x00000010
+
+/* N.B. this is called before bridges is initialized, so we can't
+   use grackle_pcibios_{read,write}_config_dword. */
+static inline void grackle_set_stg(struct pci_controller* bp, int enable)
+{
+	unsigned int val;
+
+	out_be32(bp->cfg_addr, GRACKLE_CFA(0, 0, 0xa8));
+	val = in_le32(bp->cfg_data);
+	val = enable? (val | GRACKLE_PICR1_STG) :
+		(val & ~GRACKLE_PICR1_STG);
+	out_be32(bp->cfg_addr, GRACKLE_CFA(0, 0, 0xa8));
+	out_le32(bp->cfg_data, val);
+	(void)in_le32(bp->cfg_data);
+}
+
+static inline void grackle_set_loop_snoop(struct pci_controller *bp, int enable)
+{
+	unsigned int val;
+
+	out_be32(bp->cfg_addr, GRACKLE_CFA(0, 0, 0xa8));
+	val = in_le32(bp->cfg_data);
+	val = enable? (val | GRACKLE_PICR1_LOOPSNOOP) :
+		(val & ~GRACKLE_PICR1_LOOPSNOOP);
+	out_be32(bp->cfg_addr, GRACKLE_CFA(0, 0, 0xa8));
+	out_le32(bp->cfg_data, val);
+	(void)in_le32(bp->cfg_data);
+}
+
+static int __init
+setup_uninorth(struct pci_controller* hose, struct reg_property* addr)
+{
+	pci_assign_all_busses = 1;
+	has_uninorth = 1;
+	hose->ops = &macrisc_pci_ops;
+	hose->cfg_addr = ioremap(addr->address + 0x800000, 0x1000);
+	hose->cfg_data = ioremap(addr->address + 0xc00000, 0x1000);
+	/* We "know" that the bridge at f2000000 has the PCI slots. */
+	return addr->address == 0xf2000000;
+}
+
+static void __init
+setup_bandit(struct pci_controller* hose, struct reg_property* addr)
+{
+	hose->ops = &macrisc_pci_ops;
+	hose->cfg_addr = ioremap(addr->address + 0x800000, 0x1000);
+	hose->cfg_data = ioremap(addr->address + 0xc00000, 0x1000);
+	init_bandit(hose);
+}
+
+static void __init
+setup_chaos(struct pci_controller* hose, struct reg_property* addr)
+{
+	/* assume a `chaos' bridge */
+	hose->ops = &chaos_pci_ops;
+	hose->cfg_addr = ioremap(addr->address + 0x800000, 0x1000);
+	hose->cfg_data = ioremap(addr->address + 0xc00000, 0x1000);
+}
+
+#ifdef CONFIG_POWER4
+
+static void __init
+setup_u3_agp(struct pci_controller* hose, struct reg_property* addr)
+{
+	/* On G5, we move AGP up to high bus number so we don't need
+	 * to reassign bus numbers for HT. If we ever have P2P bridges
+	 * on AGP, we'll have to move pci_assign_all_busses to the
+	 * pci_controller structure so we enable it for AGP and not for
+	 * HT childs.
+	 * We hard code the address because of the different size of
+	 * the reg address cell, we shall fix that by killing struct
+	 * reg_property and using some accessor functions instead
+	 */
+       	hose->first_busno = 0xf0;
+	hose->last_busno = 0xff;
+	has_uninorth = 1;
+	hose->ops = &macrisc_pci_ops;
+	hose->cfg_addr = ioremap(0xf0000000 + 0x800000, 0x1000);
+	hose->cfg_data = ioremap(0xf0000000 + 0xc00000, 0x1000);
+
+	u3_agp = hose;
+}
+
+static void __init
+setup_u3_ht(struct pci_controller* hose, struct reg_property *addr)
+{
+	struct device_node *np = (struct device_node *)hose->arch_data;
+	int i, cur;
+
+	hose->ops = &u3_ht_pci_ops;
+
+	/* We hard code the address because of the different size of
+	 * the reg address cell, we shall fix that by killing struct
+	 * reg_property and using some accessor functions instead
+	 */
+	hose->cfg_data = ioremap(0xf2000000, 0x02000000);
+
+	/*
+	 * /ht node doesn't expose a "ranges" property, so we "remove" regions that
+	 * have been allocated to AGP. So far, this version of the code doesn't assign
+	 * any of the 0xfxxxxxxx "fine" memory regions to /ht.
+	 * We need to fix that sooner or later by either parsing all child "ranges"
+	 * properties or figuring out the U3 address space decoding logic and
+	 * then read its configuration register (if any).
+	 */
+	hose->io_base_phys = 0xf4000000;
+	hose->io_base_virt = ioremap(hose->io_base_phys, 0x00400000);
+	isa_io_base = (unsigned long) hose->io_base_virt;
+	hose->io_resource.name = np->full_name;
+	hose->io_resource.start = 0;
+	hose->io_resource.end = 0x003fffff;
+	hose->io_resource.flags = IORESOURCE_IO;
+	hose->pci_mem_offset = 0;
+	hose->first_busno = 0;
+	hose->last_busno = 0xef;
+	hose->mem_resources[0].name = np->full_name;
+	hose->mem_resources[0].start = 0x80000000;
+	hose->mem_resources[0].end = 0xefffffff;
+	hose->mem_resources[0].flags = IORESOURCE_MEM;
+
+	if (u3_agp == NULL) {
+		DBG("U3 has no AGP, using full resource range\n");
+		return;
+	}
+
+	/* We "remove" the AGP resources from the resources allocated to HT, that
+	 * is we create "holes". However, that code does assumptions that so far
+	 * happen to be true (cross fingers...), typically that resources in the
+	 * AGP node are properly ordered
+	 */
+	cur = 0;
+	for (i=0; i<3; i++) {
+		struct resource *res = &u3_agp->mem_resources[i];
+		if (res->flags != IORESOURCE_MEM)
+			continue;
+		/* We don't care about "fine" resources */
+		if (res->start >= 0xf0000000)
+			continue;
+		/* Check if it's just a matter of "shrinking" us in one direction */
+		if (hose->mem_resources[cur].start == res->start) {
+			DBG("U3/HT: shrink start of %d, %08lx -> %08lx\n",
+			    cur, hose->mem_resources[cur].start, res->end + 1);
+			hose->mem_resources[cur].start = res->end + 1;
+			continue;
+		}
+		if (hose->mem_resources[cur].end == res->end) {
+			DBG("U3/HT: shrink end of %d, %08lx -> %08lx\n",
+			    cur, hose->mem_resources[cur].end, res->start - 1);
+			hose->mem_resources[cur].end = res->start - 1;
+			continue;
+		}
+		/* No, it's not the case, we need a hole */
+		if (cur == 2) {
+			/* not enough resources to make a hole, we drop part of the range */
+			printk(KERN_WARNING "Running out of resources for /ht host !\n");
+			hose->mem_resources[cur].end = res->start - 1;
+			continue;
+		}		
+		cur++;
+       		DBG("U3/HT: hole, %d end at %08lx, %d start at %08lx\n",
+		    cur-1, res->start - 1, cur, res->end + 1);
+		hose->mem_resources[cur].name = np->full_name;
+		hose->mem_resources[cur].flags = IORESOURCE_MEM;
+		hose->mem_resources[cur].start = res->end + 1;
+		hose->mem_resources[cur].end = hose->mem_resources[cur-1].end;
+		hose->mem_resources[cur-1].end = res->start - 1;
+	}
+}
+
+#endif /* CONFIG_POWER4 */
+
+void __init
+setup_grackle(struct pci_controller *hose)
+{
+	setup_indirect_pci(hose, 0xfec00000, 0xfee00000);
+	if (machine_is_compatible("AAPL,PowerBook1998"))
+		grackle_set_loop_snoop(hose, 1);
+#if 0	/* Disabled for now, HW problems ??? */
+	grackle_set_stg(hose, 1);
+#endif
+}
+
+/*
+ * We assume that if we have a G3 powermac, we have one bridge called
+ * "pci" (a MPC106) and no bandit or chaos bridges, and contrariwise,
+ * if we have one or more bandit or chaos bridges, we don't have a MPC106.
+ */
+static int __init
+add_bridge(struct device_node *dev)
+{
+	int len;
+	struct pci_controller *hose;
+	struct reg_property *addr;
+	char* disp_name;
+	int *bus_range;
+	int primary = 1;
+
+	DBG("Adding PCI host bridge %s\n", dev->full_name);
+
+       	addr = (struct reg_property *) get_property(dev, "reg", &len);
+       	if (addr == NULL || len < sizeof(*addr)) {
+       		printk(KERN_WARNING "Can't use %s: no address\n",
+       		       dev->full_name);
+       		return -ENODEV;
+       	}
+       	bus_range = (int *) get_property(dev, "bus-range", &len);
+       	if (bus_range == NULL || len < 2 * sizeof(int)) {
+       		printk(KERN_WARNING "Can't get bus-range for %s, assume bus 0\n",
+       			       dev->full_name);
+       	}
+
+       	hose = pcibios_alloc_controller();
+       	if (!hose)
+       		return -ENOMEM;
+       	hose->arch_data = dev;
+       	hose->first_busno = bus_range ? bus_range[0] : 0;
+       	hose->last_busno = bus_range ? bus_range[1] : 0xff;
+
+	disp_name = NULL;
+#ifdef CONFIG_POWER4
+       	if (device_is_compatible(dev, "u3-agp")) {
+       		setup_u3_agp(hose, addr);
+       		disp_name = "U3-AGP";
+       		primary = 0;
+       	} else if (device_is_compatible(dev, "u3-ht")) {
+       		setup_u3_ht(hose, addr);
+       		disp_name = "U3-HT";
+       		primary = 1;
+       	} else
+#endif /* CONFIG_POWER4 */
+	if (device_is_compatible(dev, "uni-north")) {
+       		primary = setup_uninorth(hose, addr);
+       		disp_name = "UniNorth";
+       	} else if (strcmp(dev->name, "pci") == 0) {
+       		/* XXX assume this is a mpc106 (grackle) */
+       		setup_grackle(hose);
+       		disp_name = "Grackle (MPC106)";
+       	} else if (strcmp(dev->name, "bandit") == 0) {
+       		setup_bandit(hose, addr);
+       		disp_name = "Bandit";
+       	} else if (strcmp(dev->name, "chaos") == 0) {
+       		setup_chaos(hose, addr);
+       		disp_name = "Chaos";
+       		primary = 0;
+       	}
+       	printk(KERN_INFO "Found %s PCI host bridge at 0x%08x. Firmware bus number: %d->%d\n",
+       		disp_name, addr->address, hose->first_busno, hose->last_busno);
+       	DBG(" ->Hose at 0x%p, cfg_addr=0x%p,cfg_data=0x%p\n",
+       		hose, hose->cfg_addr, hose->cfg_data);
+
+       	/* Interpret the "ranges" property */
+       	/* This also maps the I/O region and sets isa_io/mem_base */
+       	pci_process_bridge_OF_ranges(hose, dev, primary);
+
+       	/* Fixup "bus-range" OF property */
+       	fixup_bus_range(dev);
+
+	return 0;
+}
+
+static void __init
+pcibios_fixup_OF_interrupts(void)
+{
+	struct pci_dev* dev = NULL;
+
+	/*
+	 * Open Firmware often doesn't initialize the
+	 * PCI_INTERRUPT_LINE config register properly, so we
+	 * should find the device node and apply the interrupt
+	 * obtained from the OF device-tree
+	 */
+	for_each_pci_dev(dev) {
+		struct device_node *node;
+		node = pci_device_to_OF_node(dev);
+		/* this is the node, see if it has interrupts */
+		if (node && node->n_intrs > 0)
+			dev->irq = node->intrs[0].line;
+		pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
+	}
+}
+
+void __init
+pmac_pcibios_fixup(void)
+{
+	/* Fixup interrupts according to OF tree */
+	pcibios_fixup_OF_interrupts();
+}
+
+int __pmac
+pmac_pci_enable_device_hook(struct pci_dev *dev, int initial)
+{
+	struct device_node* node;
+	int updatecfg = 0;
+	int uninorth_child;
+
+	node = pci_device_to_OF_node(dev);
+
+	/* We don't want to enable USB controllers absent from the OF tree
+	 * (iBook second controller)
+	 */
+	if (dev->vendor == PCI_VENDOR_ID_APPLE
+	    && (dev->class == ((PCI_CLASS_SERIAL_USB << 8) | 0x10))
+	    && !node) {
+		printk(KERN_INFO "Apple USB OHCI %s disabled by firmware\n",
+		       pci_name(dev));
+		return -EINVAL;
+	}
+
+	if (!node)
+		return 0;
+
+	uninorth_child = node->parent &&
+		device_is_compatible(node->parent, "uni-north");
+	
+	/* Firewire & GMAC were disabled after PCI probe, the driver is
+	 * claiming them, we must re-enable them now.
+	 */
+	if (uninorth_child && !strcmp(node->name, "firewire") &&
+	    (device_is_compatible(node, "pci106b,18") ||
+	     device_is_compatible(node, "pci106b,30") ||
+	     device_is_compatible(node, "pci11c1,5811"))) {
+		pmac_call_feature(PMAC_FTR_1394_CABLE_POWER, node, 0, 1);
+		pmac_call_feature(PMAC_FTR_1394_ENABLE, node, 0, 1);
+		updatecfg = 1;
+	}
+	if (uninorth_child && !strcmp(node->name, "ethernet") &&
+	    device_is_compatible(node, "gmac")) {
+		pmac_call_feature(PMAC_FTR_GMAC_ENABLE, node, 0, 1);
+		updatecfg = 1;
+	}
+
+	if (updatecfg) {
+		u16 cmd;
+	
+		/*
+		 * Make sure PCI is correctly configured
+		 *
+		 * We use old pci_bios versions of the function since, by
+		 * default, gmac is not powered up, and so will be absent
+		 * from the kernel initial PCI lookup.
+		 *
+		 * Should be replaced by 2.4 new PCI mechanisms and really
+		 * register the device.
+		 */
+		pci_read_config_word(dev, PCI_COMMAND, &cmd);
+		cmd |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | PCI_COMMAND_INVALIDATE;
+    		pci_write_config_word(dev, PCI_COMMAND, cmd);
+    		pci_write_config_byte(dev, PCI_LATENCY_TIMER, 16);
+    		pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, pci_cache_line_size);
+	}
+
+	return 0;
+}
+
+/* We power down some devices after they have been probed. They'll
+ * be powered back on later on
+ */
+void __init
+pmac_pcibios_after_init(void)
+{
+	struct device_node* nd;
+
+#ifdef CONFIG_BLK_DEV_IDE
+	struct pci_dev *dev = NULL;
+
+	/* OF fails to initialize IDE controllers on macs
+	 * (and maybe other machines)
+	 *
+	 * Ideally, this should be moved to the IDE layer, but we need
+	 * to check specifically with Andre Hedrick how to do it cleanly
+	 * since the common IDE code seem to care about the fact that the
+	 * BIOS may have disabled a controller.
+	 *
+	 * -- BenH
+	 */
+	for_each_pci_dev(dev) {
+		if ((dev->class >> 16) == PCI_BASE_CLASS_STORAGE)
+			pci_enable_device(dev);
+	}
+#endif /* CONFIG_BLK_DEV_IDE */
+
+	nd = find_devices("firewire");
+	while (nd) {
+		if (nd->parent && (device_is_compatible(nd, "pci106b,18") ||
+				   device_is_compatible(nd, "pci106b,30") ||
+				   device_is_compatible(nd, "pci11c1,5811"))
+		    && device_is_compatible(nd->parent, "uni-north")) {
+			pmac_call_feature(PMAC_FTR_1394_ENABLE, nd, 0, 0);
+			pmac_call_feature(PMAC_FTR_1394_CABLE_POWER, nd, 0, 0);
+		}
+		nd = nd->next;
+	}
+	nd = find_devices("ethernet");
+	while (nd) {
+		if (nd->parent && device_is_compatible(nd, "gmac")
+		    && device_is_compatible(nd->parent, "uni-north"))
+			pmac_call_feature(PMAC_FTR_GMAC_ENABLE, nd, 0, 0);
+		nd = nd->next;
+	}
+}
+
+void pmac_pci_fixup_cardbus(struct pci_dev* dev)
+{
+	if (_machine != _MACH_Pmac)
+		return;
+	/*
+	 * Fix the interrupt routing on the various cardbus bridges
+	 * used on powerbooks
+	 */
+	if (dev->vendor != PCI_VENDOR_ID_TI)
+		return;
+	if (dev->device == PCI_DEVICE_ID_TI_1130 ||
+	    dev->device == PCI_DEVICE_ID_TI_1131) {
+		u8 val;
+	    	/* Enable PCI interrupt */
+		if (pci_read_config_byte(dev, 0x91, &val) == 0)
+			pci_write_config_byte(dev, 0x91, val | 0x30);
+		/* Disable ISA interrupt mode */
+		if (pci_read_config_byte(dev, 0x92, &val) == 0)
+			pci_write_config_byte(dev, 0x92, val & ~0x06);
+	}
+	if (dev->device == PCI_DEVICE_ID_TI_1210 ||
+	    dev->device == PCI_DEVICE_ID_TI_1211 ||
+	    dev->device == PCI_DEVICE_ID_TI_1410 ||
+	    dev->device == PCI_DEVICE_ID_TI_1510) {
+		u8 val;
+		/* 0x8c == TI122X_IRQMUX, 2 says to route the INTA
+		   signal out the MFUNC0 pin */
+		if (pci_read_config_byte(dev, 0x8c, &val) == 0)
+			pci_write_config_byte(dev, 0x8c, (val & ~0x0f) | 2);
+		/* Disable ISA interrupt mode */
+		if (pci_read_config_byte(dev, 0x92, &val) == 0)
+			pci_write_config_byte(dev, 0x92, val & ~0x06);
+	}
+}
+
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_TI, PCI_ANY_ID, pmac_pci_fixup_cardbus);
+
+void pmac_pci_fixup_pciata(struct pci_dev* dev)
+{
+       u8 progif = 0;
+
+       /*
+        * On PowerMacs, we try to switch any PCI ATA controller to
+	* fully native mode
+        */
+	if (_machine != _MACH_Pmac)
+		return;
+	/* Some controllers don't have the class IDE */
+	if (dev->vendor == PCI_VENDOR_ID_PROMISE)
+		switch(dev->device) {
+		case PCI_DEVICE_ID_PROMISE_20246:
+		case PCI_DEVICE_ID_PROMISE_20262:
+		case PCI_DEVICE_ID_PROMISE_20263:
+		case PCI_DEVICE_ID_PROMISE_20265:
+		case PCI_DEVICE_ID_PROMISE_20267:
+		case PCI_DEVICE_ID_PROMISE_20268:
+		case PCI_DEVICE_ID_PROMISE_20269:
+		case PCI_DEVICE_ID_PROMISE_20270:
+		case PCI_DEVICE_ID_PROMISE_20271:
+		case PCI_DEVICE_ID_PROMISE_20275:
+		case PCI_DEVICE_ID_PROMISE_20276:
+		case PCI_DEVICE_ID_PROMISE_20277:
+			goto good;
+		}
+	/* Others, check PCI class */
+	if ((dev->class >> 8) != PCI_CLASS_STORAGE_IDE)
+		return;
+ good:
+	pci_read_config_byte(dev, PCI_CLASS_PROG, &progif);
+	if ((progif & 5) != 5) {
+		printk(KERN_INFO "Forcing PCI IDE into native mode: %s\n", pci_name(dev));
+		(void) pci_write_config_byte(dev, PCI_CLASS_PROG, progif|5);
+		if (pci_read_config_byte(dev, PCI_CLASS_PROG, &progif) ||
+		    (progif & 5) != 5)
+			printk(KERN_ERR "Rewrite of PROGIF failed !\n");
+	}
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, pmac_pci_fixup_pciata);
+
+
+/*
+ * Disable second function on K2-SATA, it's broken
+ * and disable IO BARs on first one
+ */
+void __pmac pmac_pci_fixup_k2_sata(struct pci_dev* dev)
+{
+	int i;
+	u16 cmd;
+
+	if (PCI_FUNC(dev->devfn) > 0) {
+		pci_read_config_word(dev, PCI_COMMAND, &cmd);
+		cmd &= ~(PCI_COMMAND_IO | PCI_COMMAND_MEMORY);
+		pci_write_config_word(dev, PCI_COMMAND, cmd);
+		for (i = 0; i < 6; i++) {
+			dev->resource[i].start = dev->resource[i].end = 0;
+			dev->resource[i].flags = 0;
+			pci_write_config_dword(dev, PCI_BASE_ADDRESS_0 + 4 * i, 0);
+		}
+	} else {
+		pci_read_config_word(dev, PCI_COMMAND, &cmd);
+		cmd &= ~PCI_COMMAND_IO;
+		pci_write_config_word(dev, PCI_COMMAND, cmd);
+		for (i = 0; i < 5; i++) {
+			dev->resource[i].start = dev->resource[i].end = 0;
+			dev->resource[i].flags = 0;
+			pci_write_config_dword(dev, PCI_BASE_ADDRESS_0 + 4 * i, 0);
+		}
+	}
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SERVERWORKS, 0x0240, pmac_pci_fixup_k2_sata);