Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 364 insertions, 0 deletions

diff --git a/arch/ppc/platforms/prpmc750.c b/arch/ppc/platforms/prpmc750.c
new file mode 100644
index 00000000000..c894e1ab593
--- /dev/null
+++ b/arch/ppc/platforms/prpmc750.c
@@ -0,0 +1,364 @@
+/*
+ * arch/ppc/platforms/prpmc750_setup.c
+ *
+ * Board setup routines for Motorola PrPMC750
+ *
+ * Author: Matt Porter <mporter@mvista.com>
+ *
+ * 2001-2004 (c) MontaVista, Software, Inc.  This file is licensed under
+ * the terms of the GNU General Public License version 2.  This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#include <linux/config.h>
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/reboot.h>
+#include <linux/pci.h>
+#include <linux/kdev_t.h>
+#include <linux/types.h>
+#include <linux/major.h>
+#include <linux/initrd.h>
+#include <linux/console.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/seq_file.h>
+#include <linux/ide.h>
+#include <linux/root_dev.h>
+#include <linux/slab.h>
+
+#include <asm/byteorder.h>
+#include <asm/system.h>
+#include <asm/pgtable.h>
+#include <asm/page.h>
+#include <asm/dma.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/machdep.h>
+#include <asm/pci-bridge.h>
+#include <asm/uaccess.h>
+#include <asm/time.h>
+#include <asm/open_pic.h>
+#include <asm/bootinfo.h>
+#include <asm/hawk.h>
+
+#include "prpmc750.h"
+
+extern unsigned long loops_per_jiffy;
+
+extern void gen550_progress(char *, unsigned short);
+
+static u_char prpmc750_openpic_initsenses[] __initdata =
+{
+    (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* PRPMC750_INT_HOSTINT0 */
+    (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* PRPMC750_INT_UART */
+    (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* PRPMC750_INT_DEBUGINT */
+    (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* PRPMC750_INT_HAWK_WDT */
+    (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* PRPMC750_INT_UNUSED */
+    (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* PRPMC750_INT_ABORT */
+    (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* PRPMC750_INT_HOSTINT1 */
+    (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* PRPMC750_INT_HOSTINT2 */
+    (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* PRPMC750_INT_HOSTINT3 */
+    (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* PRPMC750_INT_PMC_INTA */
+    (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* PRPMC750_INT_PMC_INTB */
+    (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* PRPMC750_INT_PMC_INTC */
+    (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* PRPMC750_INT_PMC_INTD */
+    (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* PRPMC750_INT_UNUSED */
+    (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* PRPMC750_INT_UNUSED */
+    (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* PRPMC750_INT_UNUSED */
+};
+
+/*
+ * Motorola PrPMC750/PrPMC800 in PrPMCBASE or PrPMC-Carrier
+ * Combined irq tables.  Only Base has IDSEL 14, only Carrier has 21 and 22.
+ */
+static inline int
+prpmc_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
+{
+	static char pci_irq_table[][4] =
+	/*
+	 *      PCI IDSEL/INTPIN->INTLINE
+	 *      A       B       C       D
+	 */
+	{
+		{12,	0,	0,	0},  /* IDSEL 14 - Ethernet, base */
+		{0,	0,	0,	0},  /* IDSEL 15 - unused */
+		{10,	11,	12,	9},  /* IDSEL 16 - PMC A1, PMC1 */
+		{10,	11,	12,	9},  /* IDSEL 17 - PrPMC-A-B, PMC2-B */
+		{11,	12,	9,	10}, /* IDSEL 18 - PMC A1-B, PMC1-B */
+		{0,	0,	0,	0},  /* IDSEL 19 - unused */
+		{9,	10,	11,	12}, /* IDSEL 20 - P2P Bridge */
+		{11,	12,	9,	10}, /* IDSEL 21 - PMC A2, carrier */
+		{12,	9,	10,	11}, /* IDSEL 22 - PMC A2-B, carrier */
+	};
+	const long min_idsel = 14, max_idsel = 22, irqs_per_slot = 4;
+	return PCI_IRQ_TABLE_LOOKUP;
+};
+
+static void __init prpmc750_pcibios_fixup(void)
+{
+	struct pci_dev *dev;
+	unsigned short wtmp;
+
+	/*
+	 * Kludge to clean up after PPC6BUG which doesn't
+	 * configure the CL5446 VGA card.  Also the
+	 * resource subsystem doesn't fixup the
+	 * PCI mem resources on the CL5446.
+	 */
+	if ((dev = pci_get_device(PCI_VENDOR_ID_CIRRUS,
+				   PCI_DEVICE_ID_CIRRUS_5446, 0))) {
+		dev->resource[0].start += PRPMC750_PCI_PHY_MEM_OFFSET;
+		dev->resource[0].end += PRPMC750_PCI_PHY_MEM_OFFSET;
+		pci_read_config_word(dev, PCI_COMMAND, &wtmp);
+		pci_write_config_word(dev, PCI_COMMAND, wtmp | 3);
+		/* Enable Color mode in MISC reg */
+		outb(0x03, 0x3c2);
+		/* Select DRAM config reg */
+		outb(0x0f, 0x3c4);
+		/* Set proper DRAM config */
+		outb(0xdf, 0x3c5);
+		pci_dev_put(dev);
+	}
+}
+
+void __init prpmc750_find_bridges(void)
+{
+	struct pci_controller *hose;
+
+	hose = pcibios_alloc_controller();
+	if (!hose)
+		return;
+
+	hose->first_busno = 0;
+	hose->last_busno = 0xff;
+	hose->io_base_virt = (void *)PRPMC750_ISA_IO_BASE;
+	hose->pci_mem_offset = PRPMC750_PCI_PHY_MEM_OFFSET;
+
+	pci_init_resource(&hose->io_resource,
+			  PRPMC750_PCI_IO_START,
+			  PRPMC750_PCI_IO_END,
+			  IORESOURCE_IO, "PCI host bridge");
+
+	pci_init_resource(&hose->mem_resources[0],
+			  PRPMC750_PROC_PCI_MEM_START,
+			  PRPMC750_PROC_PCI_MEM_END,
+			  IORESOURCE_MEM, "PCI host bridge");
+
+	hose->io_space.start = PRPMC750_PCI_IO_START;
+	hose->io_space.end = PRPMC750_PCI_IO_END;
+	hose->mem_space.start = PRPMC750_PCI_MEM_START;
+	hose->mem_space.end = PRPMC750_PCI_MEM_END - HAWK_MPIC_SIZE;
+
+	if (hawk_init(hose, PRPMC750_HAWK_PPC_REG_BASE,
+		      PRPMC750_PROC_PCI_MEM_START,
+		      PRPMC750_PROC_PCI_MEM_END - HAWK_MPIC_SIZE,
+		      PRPMC750_PROC_PCI_IO_START, PRPMC750_PROC_PCI_IO_END,
+		      PRPMC750_PROC_PCI_MEM_END - HAWK_MPIC_SIZE + 1)
+	    != 0) {
+		printk(KERN_CRIT "Could not initialize host bridge\n");
+	}
+
+	hose->last_busno = pciauto_bus_scan(hose, hose->first_busno);
+
+	ppc_md.pcibios_fixup = prpmc750_pcibios_fixup;
+	ppc_md.pci_swizzle = common_swizzle;
+	ppc_md.pci_map_irq = prpmc_map_irq;
+}
+static int prpmc750_show_cpuinfo(struct seq_file *m)
+{
+	seq_printf(m, "machine\t\t: PrPMC750\n");
+
+	return 0;
+}
+
+static void __init prpmc750_setup_arch(void)
+{
+	/* init to some ~sane value until calibrate_delay() runs */
+	loops_per_jiffy = 50000000 / HZ;
+
+	/* Lookup PCI host bridges */
+	prpmc750_find_bridges();
+
+#ifdef CONFIG_BLK_DEV_INITRD
+	if (initrd_start)
+		ROOT_DEV = Root_RAM0;
+	else
+#endif
+#ifdef CONFIG_ROOT_NFS
+		ROOT_DEV = Root_NFS;
+#else
+		ROOT_DEV = Root_SDA2;
+#endif
+
+	OpenPIC_InitSenses = prpmc750_openpic_initsenses;
+	OpenPIC_NumInitSenses = sizeof(prpmc750_openpic_initsenses);
+
+	printk(KERN_INFO "Port by MontaVista Software, Inc. "
+			"(source@mvista.com)\n");
+}
+
+/*
+ * Compute the PrPMC750's bus speed using the baud clock as a
+ * reference.
+ */
+static unsigned long __init prpmc750_get_bus_speed(void)
+{
+	unsigned long tbl_start, tbl_end;
+	unsigned long current_state, old_state, bus_speed;
+	unsigned char lcr, dll, dlm;
+	int baud_divisor, count;
+
+	/* Read the UART's baud clock divisor */
+	lcr = readb(PRPMC750_SERIAL_0_LCR);
+	writeb(lcr | UART_LCR_DLAB, PRPMC750_SERIAL_0_LCR);
+	dll = readb(PRPMC750_SERIAL_0_DLL);
+	dlm = readb(PRPMC750_SERIAL_0_DLM);
+	writeb(lcr & ~UART_LCR_DLAB, PRPMC750_SERIAL_0_LCR);
+	baud_divisor = (dlm << 8) | dll;
+
+	/*
+	 * Use the baud clock divisor and base baud clock
+	 * to determine the baud rate and use that as
+	 * the number of baud clock edges we use for
+	 * the time base sample.  Make it half the baud
+	 * rate.
+	 */
+	count = PRPMC750_BASE_BAUD / (baud_divisor * 16);
+
+	/* Find the first edge of the baud clock */
+	old_state = readb(PRPMC750_STATUS_REG) & PRPMC750_BAUDOUT_MASK;
+	do {
+		current_state = readb(PRPMC750_STATUS_REG) &
+		    PRPMC750_BAUDOUT_MASK;
+	} while (old_state == current_state);
+
+	old_state = current_state;
+
+	/* Get the starting time base value */
+	tbl_start = get_tbl();
+
+	/*
+	 * Loop until we have found a number of edges equal
+	 * to half the count (half the baud rate)
+	 */
+	do {
+		do {
+			current_state = readb(PRPMC750_STATUS_REG) &
+			    PRPMC750_BAUDOUT_MASK;
+		} while (old_state == current_state);
+		old_state = current_state;
+	} while (--count);
+
+	/* Get the ending time base value */
+	tbl_end = get_tbl();
+
+	/* Compute bus speed */
+	bus_speed = (tbl_end - tbl_start) * 128;
+
+	return bus_speed;
+}
+
+static void __init prpmc750_calibrate_decr(void)
+{
+	unsigned long freq;
+	int divisor = 4;
+
+	freq = prpmc750_get_bus_speed();
+
+	tb_ticks_per_jiffy = freq / (HZ * divisor);
+	tb_to_us = mulhwu_scale_factor(freq / divisor, 1000000);
+}
+
+static void prpmc750_restart(char *cmd)
+{
+	local_irq_disable();
+	writeb(PRPMC750_MODRST_MASK, PRPMC750_MODRST_REG);
+	while (1) ;
+}
+
+static void prpmc750_halt(void)
+{
+	local_irq_disable();
+	while (1) ;
+}
+
+static void prpmc750_power_off(void)
+{
+	prpmc750_halt();
+}
+
+static void __init prpmc750_init_IRQ(void)
+{
+	openpic_init(0);
+}
+
+/*
+ * Set BAT 3 to map 0xf0000000 to end of physical memory space.
+ */
+static __inline__ void prpmc750_set_bat(void)
+{
+	mb();
+	mtspr(SPRN_DBAT1U, 0xf0001ffe);
+	mtspr(SPRN_DBAT1L, 0xf000002a);
+	mb();
+}
+
+/*
+ * We need to read the Falcon/Hawk memory controller
+ * to properly determine this value
+ */
+static unsigned long __init prpmc750_find_end_of_memory(void)
+{
+	/* Read the memory size from the Hawk SMC */
+	return hawk_get_mem_size(PRPMC750_HAWK_SMC_BASE);
+}
+
+static void __init prpmc750_map_io(void)
+{
+	io_block_mapping(PRPMC750_ISA_IO_BASE, PRPMC750_ISA_IO_BASE,
+			 0x10000000, _PAGE_IO);
+#if 0
+	io_block_mapping(0xf0000000, 0xc0000000, 0x08000000, _PAGE_IO);
+#endif
+	io_block_mapping(0xf8000000, 0xf8000000, 0x08000000, _PAGE_IO);
+}
+
+void __init
+platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
+	      unsigned long r6, unsigned long r7)
+{
+	parse_bootinfo(find_bootinfo());
+
+	/* Cover the Hawk registers with a BAT */
+	prpmc750_set_bat();
+
+	isa_io_base = PRPMC750_ISA_IO_BASE;
+	isa_mem_base = PRPMC750_ISA_MEM_BASE;
+	pci_dram_offset = PRPMC750_PCI_DRAM_OFFSET;
+
+	ppc_md.setup_arch = prpmc750_setup_arch;
+	ppc_md.show_cpuinfo = prpmc750_show_cpuinfo;
+	ppc_md.init_IRQ = prpmc750_init_IRQ;
+	ppc_md.get_irq = openpic_get_irq;
+
+	ppc_md.find_end_of_memory = prpmc750_find_end_of_memory;
+	ppc_md.setup_io_mappings = prpmc750_map_io;
+
+	ppc_md.restart = prpmc750_restart;
+	ppc_md.power_off = prpmc750_power_off;
+	ppc_md.halt = prpmc750_halt;
+
+	/* PrPMC750 has no timekeeper part */
+	ppc_md.time_init = NULL;
+	ppc_md.get_rtc_time = NULL;
+	ppc_md.set_rtc_time = NULL;
+	ppc_md.calibrate_decr = prpmc750_calibrate_decr;
+
+#ifdef  CONFIG_SERIAL_TEXT_DEBUG
+	ppc_md.progress = gen550_progress;
+#endif				/* CONFIG_SERIAL_TEXT_DEBUG */
+}