Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 82 insertions, 0 deletions

diff --git a/arch/ppc/platforms/prpmc800.h b/arch/ppc/platforms/prpmc800.h
new file mode 100644
index 00000000000..e53ec9b42a3
--- /dev/null
+++ b/arch/ppc/platforms/prpmc800.h
@@ -0,0 +1,82 @@
+/*
+ * include/asm-ppc/platforms/prpmc800.h
+ *
+ * Definitions for Motorola PrPMC800 board support
+ *
+ * Author: Dale Farnsworth <dale.farnsworth@mvista.com>
+ *
+ * 2001-2004 (c) MontaVista, Software, Inc.  This file is licensed under
+ * the terms of the GNU General Public License version 2.  This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+ /*
+  * From Processor to PCI:
+  *   PCI Mem Space: 0x80000000 - 0xa0000000 -> 0x80000000 - 0xa0000000 (512 MB)
+  *   PCI I/O Space: 0xfe400000 - 0xfeef0000 -> 0x00000000 - 0x00b00000 (11 MB)
+  *      Note: Must skip 0xfe000000-0xfe400000 for CONFIG_HIGHMEM/PKMAP area
+  *
+  * From PCI to Processor:
+  *   System Memory: 0x00000000 -> 0x00000000
+  */
+
+#ifndef __ASMPPC_PRPMC800_H
+#define __ASMPPC_PRPMC800_H
+
+#define PRPMC800_PCI_CONFIG_ADDR		0xfe000cf8
+#define PRPMC800_PCI_CONFIG_DATA		0xfe000cfc
+
+#define PRPMC800_PROC_PCI_IO_START		0xfe400000U
+#define PRPMC800_PROC_PCI_IO_END		0xfeefffffU
+#define PRPMC800_PCI_IO_START			0x00000000U
+#define PRPMC800_PCI_IO_END			0x00afffffU
+
+#define PRPMC800_PROC_PCI_MEM_START		0x80000000U
+#define PRPMC800_PROC_PCI_MEM_END		0x9fffffffU
+#define PRPMC800_PCI_MEM_START			0x80000000U
+#define PRPMC800_PCI_MEM_END			0x9fffffffU
+
+#define PRPMC800_NM_PROC_PCI_MEM_START		0x40000000U
+#define PRPMC800_NM_PROC_PCI_MEM_END		0xdfffffffU
+#define PRPMC800_NM_PCI_MEM_START		0x40000000U
+#define PRPMC800_NM_PCI_MEM_END			0xdfffffffU
+
+#define PRPMC800_PCI_DRAM_OFFSET		0x00000000U
+#define PRPMC800_PCI_PHY_MEM_OFFSET		0x00000000U
+
+#define PRPMC800_ISA_IO_BASE			PRPMC800_PROC_PCI_IO_START
+#define PRPMC800_ISA_MEM_BASE			0x00000000U
+
+#define PRPMC800_HARRIER_XCSR_BASE		HARRIER_DEFAULT_XCSR_BASE
+#define PRPMC800_HARRIER_MPIC_BASE		0xff000000
+
+#define PRPMC800_SERIAL_1			0xfeff00c0
+
+#define PRPMC800_BASE_BAUD			1843200
+
+/*
+ * interrupt vector number and priority for harrier internal interrupt
+ * sources
+ */
+#define PRPMC800_INT_IRQ			16
+#define PRPMC800_INT_PRI			15
+
+/* UART Defines. */
+#define RS_TABLE_SIZE  4
+
+/* Rate for the 1.8432 Mhz clock for the onboard serial chip */
+#define BASE_BAUD (PRPMC800_BASE_BAUD / 16)
+
+#define STD_COM_FLAGS ASYNC_BOOT_AUTOCONF
+
+/* UARTS are at IRQ 16 */
+#define STD_SERIAL_PORT_DFNS \
+        { 0, BASE_BAUD, PRPMC800_SERIAL_1, 16, STD_COM_FLAGS, /* ttyS0 */\
+		iomem_base: (unsigned char *)PRPMC800_SERIAL_1,		\
+		iomem_reg_shift: 0,					\
+		io_type: SERIAL_IO_MEM },
+
+#define SERIAL_PORT_DFNS \
+        STD_SERIAL_PORT_DFNS
+
+#endif				/* __ASMPPC_PRPMC800_H */