Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 510 insertions, 0 deletions

diff --git a/arch/ppc/syslib/mpc10x_common.c b/arch/ppc/syslib/mpc10x_common.c
new file mode 100644
index 00000000000..fd93adfd464
--- /dev/null
+++ b/arch/ppc/syslib/mpc10x_common.c
@@ -0,0 +1,510 @@
+/*
+ * arch/ppc/syslib/mpc10x_common.c
+ *
+ * Common routines for the Motorola SPS MPC106, MPC107 and MPC8240 Host bridge,
+ * Mem ctlr, EPIC, etc.
+ *
+ * Author: Mark A. Greer
+ *         mgreer@mvista.com
+ *
+ * 2001 (c) MontaVista, Software, Inc.  This file is licensed under
+ * the terms of the GNU General Public License version 2.  This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+/*
+ * *** WARNING - A BAT MUST be set to access the PCI config addr/data regs ***
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/slab.h>
+
+#include <asm/byteorder.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/uaccess.h>
+#include <asm/machdep.h>
+#include <asm/pci-bridge.h>
+#include <asm/open_pic.h>
+#include <asm/mpc10x.h>
+#include <asm/ocp.h>
+
+/* The OCP structure is fixed by code below, before OCP initialises.
+   paddr depends on where the board places the EUMB.
+    - fixed in mpc10x_bridge_init().
+   irq depends on two things:
+    > does the board use the EPIC at all? (PCORE does not).
+    > is the EPIC in serial or parallel mode?
+    - fixed in mpc10x_set_openpic().
+*/
+
+#ifdef CONFIG_MPC10X_OPENPIC
+#ifdef CONFIG_EPIC_SERIAL_MODE
+#define EPIC_IRQ_BASE (epic_serial_mode ? 16 : 5)
+#else
+#define EPIC_IRQ_BASE 5
+#endif
+#define MPC10X_I2C_IRQ (EPIC_IRQ_BASE + NUM_8259_INTERRUPTS)
+#define MPC10X_DMA0_IRQ (EPIC_IRQ_BASE + 1 + NUM_8259_INTERRUPTS)
+#define MPC10X_DMA1_IRQ (EPIC_IRQ_BASE + 2 + NUM_8259_INTERRUPTS)
+#else
+#define MPC10X_I2C_IRQ OCP_IRQ_NA
+#define MPC10X_DMA0_IRQ OCP_IRQ_NA
+#define MPC10X_DMA1_IRQ OCP_IRQ_NA
+#endif
+
+
+struct ocp_def core_ocp[] = {
+	{ .vendor	= OCP_VENDOR_INVALID
+	}
+};
+
+static struct ocp_fs_i2c_data mpc10x_i2c_data = {
+	.flags		= 0
+};
+static struct ocp_def mpc10x_i2c_ocp = {
+	.vendor		= OCP_VENDOR_MOTOROLA,
+	.function	= OCP_FUNC_IIC,
+	.index		= 0,
+	.additions	= &mpc10x_i2c_data
+};
+
+static struct ocp_def mpc10x_dma_ocp[2] = {
+{	.vendor		= OCP_VENDOR_MOTOROLA,
+	.function	= OCP_FUNC_DMA,
+	.index		= 0 },
+{	.vendor		= OCP_VENDOR_MOTOROLA,
+	.function	= OCP_FUNC_DMA,
+	.index		= 1 }
+};
+
+/* Set resources to match bridge memory map */
+void __init
+mpc10x_bridge_set_resources(int map, struct pci_controller *hose)
+{
+
+	switch (map) {
+		case MPC10X_MEM_MAP_A:
+			pci_init_resource(&hose->io_resource,
+					0x00000000,
+					0x3f7fffff,
+					IORESOURCE_IO,
+					"PCI host bridge");
+
+			pci_init_resource (&hose->mem_resources[0],
+					0xc0000000,
+					0xfeffffff,
+					IORESOURCE_MEM,
+					"PCI host bridge");
+			break;
+		case MPC10X_MEM_MAP_B:
+			pci_init_resource(&hose->io_resource,
+					0x00000000,
+					0x00bfffff,
+					IORESOURCE_IO,
+					"PCI host bridge");
+
+			pci_init_resource (&hose->mem_resources[0],
+					0x80000000,
+					0xfcffffff,
+					IORESOURCE_MEM,
+					"PCI host bridge");
+			break;
+		default:
+			printk("mpc10x_bridge_set_resources: "
+					"Invalid map specified\n");
+			if (ppc_md.progress)
+				ppc_md.progress("mpc10x:exit1", 0x100);
+	}
+}
+/*
+ * Do some initialization and put the EUMB registers at the specified address
+ * (also map the EPIC registers into virtual space--OpenPIC_Addr will be set).
+ *
+ * The EPIC is not on the 106, only the 8240 and 107.
+ */
+int __init
+mpc10x_bridge_init(struct pci_controller *hose,
+		   uint current_map,
+		   uint new_map,
+		   uint phys_eumb_base)
+{
+	int	host_bridge, picr1, picr1_bit;
+	ulong	pci_config_addr, pci_config_data;
+	u_char	pir, byte;
+
+	if (ppc_md.progress) ppc_md.progress("mpc10x:enter", 0x100);
+
+	/* Set up for current map so we can get at config regs */
+	switch (current_map) {
+		case MPC10X_MEM_MAP_A:
+			setup_indirect_pci(hose,
+					   MPC10X_MAPA_CNFG_ADDR,
+					   MPC10X_MAPA_CNFG_DATA);
+			break;
+		case MPC10X_MEM_MAP_B:
+			setup_indirect_pci(hose,
+					   MPC10X_MAPB_CNFG_ADDR,
+					   MPC10X_MAPB_CNFG_DATA);
+			break;
+		default:
+			printk("mpc10x_bridge_init: %s\n",
+				"Invalid current map specified");
+			if (ppc_md.progress)
+				ppc_md.progress("mpc10x:exit1", 0x100);
+			return -1;
+	}
+
+	/* Make sure it's a supported bridge */
+	early_read_config_dword(hose,
+			        0,
+			        PCI_DEVFN(0,0),
+			        PCI_VENDOR_ID,
+			        &host_bridge);
+
+	switch (host_bridge) {
+		case MPC10X_BRIDGE_106:
+		case MPC10X_BRIDGE_8240:
+		case MPC10X_BRIDGE_107:
+		case MPC10X_BRIDGE_8245:
+			break;
+		default:
+			if (ppc_md.progress)
+				ppc_md.progress("mpc10x:exit2", 0x100);
+			return -1;
+	}
+
+	switch (new_map) {
+		case MPC10X_MEM_MAP_A:
+			MPC10X_SETUP_HOSE(hose, A);
+			pci_config_addr = MPC10X_MAPA_CNFG_ADDR;
+			pci_config_data = MPC10X_MAPA_CNFG_DATA;
+			picr1_bit = MPC10X_CFG_PICR1_ADDR_MAP_A;
+			break;
+		case MPC10X_MEM_MAP_B:
+			MPC10X_SETUP_HOSE(hose, B);
+			pci_config_addr = MPC10X_MAPB_CNFG_ADDR;
+			pci_config_data = MPC10X_MAPB_CNFG_DATA;
+			picr1_bit = MPC10X_CFG_PICR1_ADDR_MAP_B;
+			break;
+		default:
+			printk("mpc10x_bridge_init: %s\n",
+				"Invalid new map specified");
+			if (ppc_md.progress)
+				ppc_md.progress("mpc10x:exit3", 0x100);
+			return -1;
+	}
+
+	/* Make bridge use the 'new_map', if not already usng it */
+	if (current_map != new_map) {
+		early_read_config_dword(hose,
+					0,
+					PCI_DEVFN(0,0),
+					MPC10X_CFG_PICR1_REG,
+					&picr1);
+
+		picr1 = (picr1 & ~MPC10X_CFG_PICR1_ADDR_MAP_MASK) |
+			 picr1_bit;
+
+		early_write_config_dword(hose,
+					 0,
+					 PCI_DEVFN(0,0),
+					 MPC10X_CFG_PICR1_REG,
+					 picr1);
+
+		asm volatile("sync");
+
+		/* Undo old mappings & map in new cfg data/addr regs */
+		iounmap((void *)hose->cfg_addr);
+		iounmap((void *)hose->cfg_data);
+
+		setup_indirect_pci(hose,
+				   pci_config_addr,
+				   pci_config_data);
+	}
+
+	/* Setup resources to match map */
+	mpc10x_bridge_set_resources(new_map, hose);
+
+	/*
+	 * Want processor accesses of 0xFDxxxxxx to be mapped
+	 * to PCI memory space at 0x00000000.  Do not want
+	 * host bridge to respond to PCI memory accesses of
+	 * 0xFDxxxxxx.  Do not want host bridge to respond
+	 * to PCI memory addresses 0xFD000000-0xFDFFFFFF;
+	 * want processor accesses from 0x000A0000-0x000BFFFF
+	 * to be forwarded to system memory.
+	 *
+	 * Only valid if not in agent mode and using MAP B.
+	 */
+	if (new_map == MPC10X_MEM_MAP_B) {
+		early_read_config_byte(hose,
+				       0,
+				       PCI_DEVFN(0,0),
+				       MPC10X_CFG_MAPB_OPTIONS_REG,
+				       &byte);
+
+		byte &= ~(MPC10X_CFG_MAPB_OPTIONS_PFAE  |
+			  MPC10X_CFG_MAPB_OPTIONS_PCICH |
+			  MPC10X_CFG_MAPB_OPTIONS_PROCCH);
+
+		if (host_bridge != MPC10X_BRIDGE_106) {
+			byte |= MPC10X_CFG_MAPB_OPTIONS_CFAE;
+		}
+
+		early_write_config_byte(hose,
+					0,
+					PCI_DEVFN(0,0),
+					MPC10X_CFG_MAPB_OPTIONS_REG,
+					byte);
+	}
+
+	if (host_bridge != MPC10X_BRIDGE_106) {
+		early_read_config_byte(hose,
+				       0,
+				       PCI_DEVFN(0,0),
+				       MPC10X_CFG_PIR_REG,
+				       &pir);
+
+		if (pir != MPC10X_CFG_PIR_HOST_BRIDGE) {
+			printk("Host bridge in Agent mode\n");
+			/* Read or Set LMBAR & PCSRBAR? */
+		}
+		
+		/* Set base addr of the 8240/107 EUMB.  */
+		early_write_config_dword(hose,
+					 0,
+					 PCI_DEVFN(0,0),
+					 MPC10X_CFG_EUMBBAR,
+					 phys_eumb_base);
+#ifdef CONFIG_MPC10X_OPENPIC
+		/* Map EPIC register part of EUMB into vitual memory  - PCORE
+		   uses an i8259 instead of EPIC. */
+		OpenPIC_Addr =
+			ioremap(phys_eumb_base + MPC10X_EUMB_EPIC_OFFSET,
+				MPC10X_EUMB_EPIC_SIZE);
+#endif
+		mpc10x_i2c_ocp.paddr = phys_eumb_base + MPC10X_EUMB_I2C_OFFSET;
+		mpc10x_i2c_ocp.irq = MPC10X_I2C_IRQ;
+		ocp_add_one_device(&mpc10x_i2c_ocp);
+		mpc10x_dma_ocp[0].paddr = phys_eumb_base +
+					MPC10X_EUMB_DMA_OFFSET + 0x100;
+		mpc10x_dma_ocp[0].irq = MPC10X_DMA0_IRQ;
+		ocp_add_one_device(&mpc10x_dma_ocp[0]);
+		mpc10x_dma_ocp[1].paddr = phys_eumb_base +
+					MPC10X_EUMB_DMA_OFFSET + 0x200;
+		mpc10x_dma_ocp[1].irq = MPC10X_DMA1_IRQ;
+		ocp_add_one_device(&mpc10x_dma_ocp[1]);
+	}
+
+#ifdef CONFIG_MPC10X_STORE_GATHERING
+	mpc10x_enable_store_gathering(hose);
+#else
+	mpc10x_disable_store_gathering(hose);
+#endif
+
+	/*
+	 * 8240 erratum 26, 8241/8245 erratum 29, 107 erratum 23: speculative
+	 * PCI reads may return stale data so turn off.
+	 */
+	if ((host_bridge == MPC10X_BRIDGE_8240)
+		|| (host_bridge == MPC10X_BRIDGE_8245)
+		|| (host_bridge == MPC10X_BRIDGE_107)) {
+
+		early_read_config_dword(hose, 0, PCI_DEVFN(0,0),
+			MPC10X_CFG_PICR1_REG, &picr1);
+
+		picr1 &= ~MPC10X_CFG_PICR1_SPEC_PCI_RD;
+
+		early_write_config_dword(hose, 0, PCI_DEVFN(0,0),
+			MPC10X_CFG_PICR1_REG, picr1);
+	}
+
+	/*
+	 * 8241/8245 erratum 28: PCI reads from local memory may return
+	 * stale data.  Workaround by setting PICR2[0] to disable copyback
+	 * optimization.  Oddly, the latest available user manual for the
+	 * 8245 (Rev 2., dated 10/2003) says PICR2[0] is reserverd.
+	 */
+	if (host_bridge == MPC10X_BRIDGE_8245) {
+		ulong	picr2;
+
+		early_read_config_dword(hose, 0, PCI_DEVFN(0,0),
+			MPC10X_CFG_PICR2_REG, &picr2);
+
+		picr2 |= MPC10X_CFG_PICR2_COPYBACK_OPT;
+
+		early_write_config_dword(hose, 0, PCI_DEVFN(0,0),
+			 MPC10X_CFG_PICR2_REG, picr2);
+	}
+
+	if (ppc_md.progress) ppc_md.progress("mpc10x:exit", 0x100);
+	return 0;
+}
+
+/*
+ * Need to make our own PCI config space access macros because
+ * mpc10x_get_mem_size() is called before the data structures are set up for
+ * the 'early_xxx' and 'indirect_xxx' routines to work.
+ * Assumes bus 0.
+ */
+#define MPC10X_CFG_read(val, addr, type, op)	*val = op((type)(addr))
+#define MPC10X_CFG_write(val, addr, type, op)	op((type *)(addr), (val))
+
+#define MPC10X_PCI_OP(rw, size, type, op, mask)			 	\
+static void								\
+mpc10x_##rw##_config_##size(uint *cfg_addr, uint *cfg_data, int devfn, int offset, type val) \
+{									\
+	out_be32(cfg_addr, 						\
+		 ((offset & 0xfc) << 24) | (devfn << 16)		\
+		 | (0 << 8) | 0x80);					\
+	MPC10X_CFG_##rw(val, cfg_data + (offset & mask), type, op);	\
+	return;    					 		\
+}
+
+MPC10X_PCI_OP(read,  byte,  u8 *, in_8, 3)
+MPC10X_PCI_OP(read,  dword, u32 *, in_le32, 0)
+#if 0	/* Not used */
+MPC10X_PCI_OP(write, byte,  u8, out_8, 3)
+MPC10X_PCI_OP(read,  word,  u16 *, in_le16, 2)
+MPC10X_PCI_OP(write, word,  u16, out_le16, 2)
+MPC10X_PCI_OP(write, dword, u32, out_le32, 0)
+#endif
+
+/*
+ * Read the memory controller registers to determine the amount of memory in
+ * the system.  This assumes that the firmware has correctly set up the memory
+ * controller registers.
+ */
+unsigned long __init
+mpc10x_get_mem_size(uint mem_map)
+{
+	uint			*config_addr, *config_data, val;
+	ulong			start, end, total, offset;
+	int			i;
+	u_char			bank_enables;
+
+	switch (mem_map) {
+		case MPC10X_MEM_MAP_A:
+			config_addr = (uint *)MPC10X_MAPA_CNFG_ADDR;
+			config_data = (uint *)MPC10X_MAPA_CNFG_DATA;
+			break;
+		case MPC10X_MEM_MAP_B:
+			config_addr = (uint *)MPC10X_MAPB_CNFG_ADDR;
+			config_data = (uint *)MPC10X_MAPB_CNFG_DATA;
+			break;
+		default:
+			return 0;
+	}
+
+	mpc10x_read_config_byte(config_addr,
+				config_data,
+				PCI_DEVFN(0,0),
+			        MPC10X_MCTLR_MEM_BANK_ENABLES,
+			        &bank_enables);
+
+	total = 0;
+
+	for (i=0; i<8; i++) {
+		if (bank_enables & (1 << i)) {
+			offset = MPC10X_MCTLR_MEM_START_1 + ((i > 3) ? 4 : 0);
+			mpc10x_read_config_dword(config_addr,
+						 config_data,
+						 PCI_DEVFN(0,0),
+						 offset,
+						 &val);
+			start = (val >> ((i & 3) << 3)) & 0xff;
+
+			offset = MPC10X_MCTLR_EXT_MEM_START_1 + ((i>3) ? 4 : 0);
+			mpc10x_read_config_dword(config_addr,
+						 config_data,
+						 PCI_DEVFN(0,0),
+						 offset,
+						 &val);
+			val = (val >> ((i & 3) << 3)) & 0x03;
+			start = (val << 28) | (start << 20);
+
+			offset = MPC10X_MCTLR_MEM_END_1 + ((i > 3) ? 4 : 0);
+			mpc10x_read_config_dword(config_addr,
+						 config_data,
+						 PCI_DEVFN(0,0),
+						 offset,
+						 &val);
+			end = (val >> ((i & 3) << 3)) & 0xff;
+
+			offset = MPC10X_MCTLR_EXT_MEM_END_1 + ((i > 3) ? 4 : 0);
+			mpc10x_read_config_dword(config_addr,
+						 config_data,
+						 PCI_DEVFN(0,0),
+						 offset,
+						 &val);
+			val = (val >> ((i & 3) << 3)) & 0x03;
+			end = (val << 28) | (end << 20) | 0xfffff;
+
+			total += (end - start + 1);
+		}
+	}
+
+	return total;
+}
+
+int __init
+mpc10x_enable_store_gathering(struct pci_controller *hose)
+{
+	uint picr1;
+
+	early_read_config_dword(hose,
+				0,
+				PCI_DEVFN(0,0),
+			        MPC10X_CFG_PICR1_REG,
+			        &picr1);
+
+	picr1 |= MPC10X_CFG_PICR1_ST_GATH_EN;
+
+	early_write_config_dword(hose,
+				0,
+				PCI_DEVFN(0,0),
+				MPC10X_CFG_PICR1_REG,
+				picr1);
+
+	return 0;
+}
+
+int __init
+mpc10x_disable_store_gathering(struct pci_controller *hose)
+{
+	uint picr1;
+
+	early_read_config_dword(hose,
+				0,
+				PCI_DEVFN(0,0),
+			        MPC10X_CFG_PICR1_REG,
+			        &picr1);
+
+	picr1 &= ~MPC10X_CFG_PICR1_ST_GATH_EN;
+
+	early_write_config_dword(hose,
+				0,
+				PCI_DEVFN(0,0),
+				MPC10X_CFG_PICR1_REG,
+				picr1);
+
+	return 0;
+}
+
+#ifdef CONFIG_MPC10X_OPENPIC
+void __init mpc10x_set_openpic(void)
+{
+	/* Map external IRQs */
+	openpic_set_sources(0, EPIC_IRQ_BASE, OpenPIC_Addr + 0x10200);
+	/* Skip reserved space and map i2c and DMA Ch[01] */
+	openpic_set_sources(EPIC_IRQ_BASE, 3, OpenPIC_Addr + 0x11020);
+	/* Skip reserved space and map Message Unit Interrupt (I2O) */
+	openpic_set_sources(EPIC_IRQ_BASE + 3, 1, OpenPIC_Addr + 0x110C0);
+
+	openpic_init(NUM_8259_INTERRUPTS);
+}
+#endif