[POWERPC] ppc: Add support for AMCC Taishan 440GX eval board

This patch adds support for the AMCC Taishan PPC440GX evaluation
board.

This is still an arch/ppc port. I'm aware that the move of
4xx to arch/powerpc is making good progress right now. So this
patch is mainly intended to make the Taishan support available
for the community right now.

Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>

6 files changed, 1549 insertions, 2 deletions

diff --git a/arch/ppc/configs/taishan_defconfig b/arch/ppc/configs/taishan_defconfig
new file mode 100644
index 00000000000..1ca0204267b
--- /dev/null
+++ b/arch/ppc/configs/taishan_defconfig
@@ -0,0 +1,1077 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.20
+# Mon Feb 12 11:11:58 2007
+#
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_PPC=y
+CONFIG_PPC32=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_GENERIC_BUG=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_HOTPLUG is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SHMEM=y
+CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
+# Processor
+#
+# CONFIG_6xx is not set
+# CONFIG_40x is not set
+CONFIG_44x=y
+# CONFIG_8xx is not set
+# CONFIG_E200 is not set
+# CONFIG_E500 is not set
+CONFIG_PPC_DCR_NATIVE=y
+CONFIG_PPC_DCR=y
+CONFIG_BOOKE=y
+CONFIG_PTE_64BIT=y
+CONFIG_PHYS_64BIT=y
+# CONFIG_MATH_EMULATION is not set
+# CONFIG_KEXEC is not set
+# CONFIG_CPU_FREQ is not set
+CONFIG_4xx=y
+CONFIG_WANT_EARLY_SERIAL=y
+
+#
+# IBM 4xx options
+#
+# CONFIG_BAMBOO is not set
+# CONFIG_EBONY is not set
+# CONFIG_LUAN is not set
+# CONFIG_YUCCA is not set
+# CONFIG_OCOTEA is not set
+CONFIG_TAISHAN=y
+CONFIG_440GX=y
+CONFIG_440A=y
+CONFIG_IBM_OCP=y
+CONFIG_IBM_EMAC4=y
+CONFIG_PPC4xx_DMA=y
+CONFIG_PPC4xx_EDMA=y
+CONFIG_PPC_GEN550=y
+CONFIG_NOT_COHERENT_CACHE=y
+
+#
+# Platform options
+#
+# CONFIG_PC_KEYBOARD is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_RESOURCES_64BIT=y
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="ip=on console=ttyS0,115200"
+CONFIG_SECCOMP=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+# CONFIG_PPC_I8259 is not set
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+# CONFIG_PCI_DEBUG is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_HIGHMEM_START=0xfe000000
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_TASK_SIZE=0x80000000
+CONFIG_CONSISTENT_START=0xff100000
+CONFIG_CONSISTENT_SIZE=0x00200000
+CONFIG_BOOT_LOAD=0x01000000
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_MULTIPLE_TABLES is not set
+# CONFIG_IP_ROUTE_MULTIPATH is not set
+# CONFIG_IP_ROUTE_VERBOSE is not set
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+CONFIG_BRIDGE=y
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+CONFIG_LLC=y
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+# CONFIG_STANDALONE is not set
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_GEOMETRY is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x8000000
+CONFIG_MTD_PHYSMAP_LEN=0x0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_PCI is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_NAND_CAFE is not set
+
+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=65536
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# Misc devices
+#
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_NETLINK is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+
+#
+# Macintosh device drivers
+#
+# CONFIG_MAC_EMUMOUSEBTN is not set
+# CONFIG_WINDFARM is not set
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+
+#
+# Tulip family network device support
+#
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+CONFIG_IBM_EMAC=y
+CONFIG_IBM_EMAC_RXB=128
+CONFIG_IBM_EMAC_TXB=128
+CONFIG_IBM_EMAC_POLL_WEIGHT=32
+CONFIG_IBM_EMAC_RX_COPY_THRESHOLD=256
+CONFIG_IBM_EMAC_RX_SKB_HEADROOM=0
+CONFIG_IBM_EMAC_PHY_RX_CLK_FIX=y
+# CONFIG_IBM_EMAC_DEBUG is not set
+CONFIG_IBM_EMAC_ZMII=y
+CONFIG_IBM_EMAC_RGMII=y
+CONFIG_IBM_EMAC_TAH=y
+CONFIG_NET_PCI=y
+# CONFIG_PCNET32 is not set
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_B44 is not set
+# CONFIG_FORCEDETH is not set
+# CONFIG_DGRS is not set
+# CONFIG_EEPRO100 is not set
+CONFIG_E100=y
+# CONFIG_FEALNX is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NE2K_PCI is not set
+# CONFIG_8139CP is not set
+# CONFIG_8139TOO is not set
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
+# CONFIG_VIA_RHINE is not set
+# CONFIG_SC92031 is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+
+#
+# Ethernet (10000 Mbit)
+#
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+CONFIG_PPP=y
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+# CONFIG_PPP_ASYNC is not set
+# CONFIG_PPP_SYNC_TTY is not set
+# CONFIG_PPP_DEFLATE is not set
+# CONFIG_PPP_BSDCOMP is not set
+# CONFIG_PPP_MPPE is not set
+CONFIG_PPPOE=y
+# CONFIG_SLIP is not set
+CONFIG_SLHC=y
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_PCIPS2 is not set
+# CONFIG_SERIO_LIBPS2 is not set
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+# CONFIG_SERIAL_8250_MANY_PORTS is not set
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+# CONFIG_SERIAL_8250_RSA is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+CONFIG_HW_RANDOM=m
+# CONFIG_NVRAM is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
+# I2C support
+#
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
+CONFIG_I2C_IBM_IIC=y
+# CONFIG_I2C_MPC is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PROSAVAGE is not set
+# CONFIG_I2C_SAVAGE4 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_ISA is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+CONFIG_SENSORS_EEPROM=y
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_M41T00 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+CONFIG_FIRMWARE_EDID=y
+# CONFIG_FB is not set
+# CONFIG_FB_IBM_GXT4500 is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+# CONFIG_USB is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+#
+
+#
+# Real Time Clock
+#
+# CONFIG_RTC_CLASS is not set
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
+# Auxiliary Display support
+#
+
+#
+# Virtualization
+#
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+CONFIG_EXT2_FS_XIP=y
+CONFIG_FS_XIP=y
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+CONFIG_JBD_DEBUG=y
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+CONFIG_JFFS2_SUMMARY=y
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+# CONFIG_NFS_V3 is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+# CONFIG_NLS is not set
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_KGDB is not set
+# CONFIG_XMON is not set
+CONFIG_BDI_SWITCH=y
+# CONFIG_SERIAL_TEXT_DEBUG is not set
+CONFIG_PPC_OCP=y
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
diff --git a/arch/ppc/platforms/4xx/Kconfig b/arch/ppc/platforms/4xx/Kconfig
index 6980de420e9..705ae56016f 100644
--- a/arch/ppc/platforms/4xx/Kconfig
+++ b/arch/ppc/platforms/4xx/Kconfig
@@ -98,6 +98,12 @@ config OCOTEA
 	help
 	  This option enables support for the IBM PPC440GX evaluation board.
 
+config TAISHAN
+	bool "Taishan"
+	select WANT_EARLY_SERIAL
+	help
+	  This option enables support for the AMCC PPC440GX evaluation board.
+
 endchoice
 
 config EP405PC
@@ -126,7 +132,7 @@ config 440GP
 
 config 440GX
 	bool
-	depends on OCOTEA
+	depends on OCOTEA || TAISHAN
 	default y
 
 config 440SP
@@ -173,7 +179,7 @@ config BOOKE
 
 config IBM_OCP
 	bool
-	depends on ASH || BAMBOO || BUBINGA || CPCI405 || EBONY || EP405 || LUAN || YUCCA || OCOTEA || REDWOOD_5 || REDWOOD_6 || SYCAMORE || WALNUT
+	depends on ASH || BAMBOO || BUBINGA || CPCI405 || EBONY || EP405 || LUAN || YUCCA || OCOTEA || REDWOOD_5 || REDWOOD_6 || SYCAMORE || TAISHAN || WALNUT
 	default y
 
 config IBM_EMAC4
diff --git a/arch/ppc/platforms/4xx/Makefile b/arch/ppc/platforms/4xx/Makefile
index a04a0d0a0f5..fa6610bccaf 100644
--- a/arch/ppc/platforms/4xx/Makefile
+++ b/arch/ppc/platforms/4xx/Makefile
@@ -12,6 +12,7 @@ obj-$(CONFIG_OCOTEA)		+= ocotea.o
 obj-$(CONFIG_REDWOOD_5)		+= redwood5.o
 obj-$(CONFIG_REDWOOD_6)		+= redwood6.o
 obj-$(CONFIG_SYCAMORE)		+= sycamore.o
+obj-$(CONFIG_TAISHAN)		+= taishan.o
 obj-$(CONFIG_WALNUT)		+= walnut.o
 obj-$(CONFIG_XILINX_ML300)	+= xilinx_ml300.o
 obj-$(CONFIG_XILINX_ML403)	+= xilinx_ml403.o
diff --git a/arch/ppc/platforms/4xx/taishan.c b/arch/ppc/platforms/4xx/taishan.c
new file mode 100644
index 00000000000..bb0253eef45
--- /dev/null
+++ b/arch/ppc/platforms/4xx/taishan.c
@@ -0,0 +1,395 @@
+/*
+ * arch/ppc/platforms/4xx/taishan.c
+ *
+ * AMCC Taishan board specific routines
+ *
+ * Copyright 2007 DENX Software Engineering, Stefan Roese <sr@denx.de>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/reboot.h>
+#include <linux/pci.h>
+#include <linux/kdev_t.h>
+#include <linux/types.h>
+#include <linux/major.h>
+#include <linux/blkdev.h>
+#include <linux/console.h>
+#include <linux/delay.h>
+#include <linux/ide.h>
+#include <linux/initrd.h>
+#include <linux/seq_file.h>
+#include <linux/root_dev.h>
+#include <linux/tty.h>
+#include <linux/serial.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/ndfc.h>
+#include <linux/mtd/physmap.h>
+
+#include <asm/machdep.h>
+#include <asm/ocp.h>
+#include <asm/bootinfo.h>
+#include <asm/ppcboot.h>
+
+#include <syslib/gen550.h>
+#include <syslib/ibm440gx_common.h>
+
+extern bd_t __res;
+
+static struct ibm44x_clocks clocks __initdata;
+
+/*
+ * NOR FLASH configuration (using mtd physmap driver)
+ */
+
+/* start will be added dynamically, end is always fixed */
+static struct resource taishan_nor_resource = {
+	.start = TAISHAN_FLASH_ADDR,
+	.end   = 0x1ffffffffULL,
+	.flags = IORESOURCE_MEM,
+};
+
+#define RW_PART0_OF	0
+#define RW_PART0_SZ	0x180000
+#define RW_PART1_SZ	0x200000
+/* Partition 2 will be autosized dynamically... */
+#define RW_PART3_SZ	0x80000
+#define RW_PART4_SZ	0x40000
+
+static struct mtd_partition taishan_nor_parts[] = {
+	{
+		.name = "kernel",
+		.offset = 0,
+		.size = RW_PART0_SZ
+	},
+	{
+		.name = "root",
+		.offset = MTDPART_OFS_APPEND,
+		.size = RW_PART1_SZ,
+	},
+	{
+		.name = "user",
+		.offset = MTDPART_OFS_APPEND,
+/*		.size = RW_PART2_SZ */ /* will be adjusted dynamically */
+	},
+	{
+		.name = "env",
+		.offset = MTDPART_OFS_APPEND,
+		.size = RW_PART3_SZ,
+	},
+	{
+		.name = "u-boot",
+		.offset = MTDPART_OFS_APPEND,
+		.size = RW_PART4_SZ,
+	}
+};
+
+static struct physmap_flash_data taishan_nor_data = {
+	.width		= 4,
+	.parts		= taishan_nor_parts,
+	.nr_parts	= ARRAY_SIZE(taishan_nor_parts),
+};
+
+static struct platform_device taishan_nor_device = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.dev = {
+			.platform_data = &taishan_nor_data,
+		},
+	.num_resources	= 1,
+	.resource	= &taishan_nor_resource,
+};
+
+static int taishan_setup_flash(void)
+{
+	/*
+	 * Adjust partition 2 to flash size
+	 */
+	taishan_nor_parts[2].size = __res.bi_flashsize -
+		RW_PART0_SZ - RW_PART1_SZ - RW_PART3_SZ - RW_PART4_SZ;
+
+	platform_device_register(&taishan_nor_device);
+
+	return 0;
+}
+arch_initcall(taishan_setup_flash);
+
+static void __init
+taishan_calibrate_decr(void)
+{
+	unsigned int freq;
+
+	if (mfspr(SPRN_CCR1) & CCR1_TCS)
+		freq = TAISHAN_TMR_CLK;
+	else
+		freq = clocks.cpu;
+
+	ibm44x_calibrate_decr(freq);
+}
+
+static int
+taishan_show_cpuinfo(struct seq_file *m)
+{
+	seq_printf(m, "vendor\t\t: AMCC\n");
+	seq_printf(m, "machine\t\t: PPC440GX EVB (Taishan)\n");
+	ibm440gx_show_cpuinfo(m);
+	return 0;
+}
+
+static inline int
+taishan_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
+{
+	static char pci_irq_table[][4] =
+	/*
+	 *	PCI IDSEL/INTPIN->INTLINE
+	 * 	   A   B   C   D
+	 */
+	{
+		{ 23, 24, 25, 26 },	/* IDSEL 1 - PCI Slot 0 */
+		{ 24, 25, 26, 23 },	/* IDSEL 2 - PCI Slot 1 */
+	};
+
+	const long min_idsel = 1, max_idsel = 2, irqs_per_slot = 4;
+	return PCI_IRQ_TABLE_LOOKUP;
+}
+
+static void __init taishan_set_emacdata(void)
+{
+	struct ocp_def *def;
+	struct ocp_func_emac_data *emacdata;
+	int i;
+
+	/* Set phy_map, phy_mode, and mac_addr for each EMAC */
+	for (i=2; i<4; i++) {
+		def = ocp_get_one_device(OCP_VENDOR_IBM, OCP_FUNC_EMAC, i);
+		emacdata = def->additions;
+		if (i < 2) {
+			emacdata->phy_map = 0x00000001;	/* Skip 0x00 */
+			emacdata->phy_mode = PHY_MODE_SMII;
+		} else {
+			emacdata->phy_map = 0x00000001; /* Skip 0x00 */
+			emacdata->phy_mode = PHY_MODE_RGMII;
+		}
+		if (i == 0)
+			memcpy(emacdata->mac_addr, "\0\0\0\0\0\0", 6);
+		else if (i == 1)
+			memcpy(emacdata->mac_addr, "\0\0\0\0\0\0", 6);
+		else if (i == 2)
+			memcpy(emacdata->mac_addr, __res.bi_enetaddr, 6);
+		else if (i == 3)
+			memcpy(emacdata->mac_addr, __res.bi_enet1addr, 6);
+	}
+}
+
+#define PCIX_READW(offset) \
+	(readw(pcix_reg_base+offset))
+
+#define PCIX_WRITEW(value, offset) \
+	(writew(value, pcix_reg_base+offset))
+
+#define PCIX_WRITEL(value, offset) \
+	(writel(value, pcix_reg_base+offset))
+
+/*
+ * FIXME: This is only here to "make it work".  This will move
+ * to a ibm_pcix.c which will contain a generic IBM PCIX bridge
+ * configuration library. -Matt
+ */
+static void __init
+taishan_setup_pcix(void)
+{
+	void *pcix_reg_base;
+
+	pcix_reg_base = ioremap64(PCIX0_REG_BASE, PCIX_REG_SIZE);
+
+	/* Enable PCIX0 I/O, Mem, and Busmaster cycles */
+	PCIX_WRITEW(PCIX_READW(PCIX0_COMMAND) | PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER, PCIX0_COMMAND);
+
+	/* Disable all windows */
+	PCIX_WRITEL(0, PCIX0_POM0SA);
+	PCIX_WRITEL(0, PCIX0_POM1SA);
+	PCIX_WRITEL(0, PCIX0_POM2SA);
+	PCIX_WRITEL(0, PCIX0_PIM0SA);
+	PCIX_WRITEL(0, PCIX0_PIM0SAH);
+	PCIX_WRITEL(0, PCIX0_PIM1SA);
+	PCIX_WRITEL(0, PCIX0_PIM2SA);
+	PCIX_WRITEL(0, PCIX0_PIM2SAH);
+
+	/* Setup 2GB PLB->PCI outbound mem window (3_8000_0000->0_8000_0000) */
+	PCIX_WRITEL(0x00000003, PCIX0_POM0LAH);
+	PCIX_WRITEL(0x80000000, PCIX0_POM0LAL);
+	PCIX_WRITEL(0x00000000, PCIX0_POM0PCIAH);
+	PCIX_WRITEL(0x80000000, PCIX0_POM0PCIAL);
+	PCIX_WRITEL(0x80000001, PCIX0_POM0SA);
+
+	/* Setup 2GB PCI->PLB inbound memory window at 0, enable MSIs */
+	PCIX_WRITEL(0x00000000, PCIX0_PIM0LAH);
+	PCIX_WRITEL(0x00000000, PCIX0_PIM0LAL);
+	PCIX_WRITEL(0xe0000007, PCIX0_PIM0SA);
+	PCIX_WRITEL(0xffffffff, PCIX0_PIM0SAH);
+
+	iounmap(pcix_reg_base);
+
+	eieio();
+}
+
+static void __init
+taishan_setup_hose(void)
+{
+	struct pci_controller *hose;
+
+	/* Configure windows on the PCI-X host bridge */
+	taishan_setup_pcix();
+
+	hose = pcibios_alloc_controller();
+
+	if (!hose)
+		return;
+
+	hose->first_busno = 0;
+	hose->last_busno = 0xff;
+
+	hose->pci_mem_offset = TAISHAN_PCI_MEM_OFFSET;
+
+	pci_init_resource(&hose->io_resource,
+			TAISHAN_PCI_LOWER_IO,
+			TAISHAN_PCI_UPPER_IO,
+			IORESOURCE_IO,
+			"PCI host bridge");
+
+	pci_init_resource(&hose->mem_resources[0],
+			TAISHAN_PCI_LOWER_MEM,
+			TAISHAN_PCI_UPPER_MEM,
+			IORESOURCE_MEM,
+			"PCI host bridge");
+
+	hose->io_space.start = TAISHAN_PCI_LOWER_IO;
+	hose->io_space.end = TAISHAN_PCI_UPPER_IO;
+	hose->mem_space.start = TAISHAN_PCI_LOWER_MEM;
+	hose->mem_space.end = TAISHAN_PCI_UPPER_MEM;
+	hose->io_base_virt = ioremap64(TAISHAN_PCI_IO_BASE, TAISHAN_PCI_IO_SIZE);
+	isa_io_base = (unsigned long) hose->io_base_virt;
+
+	setup_indirect_pci(hose,
+			TAISHAN_PCI_CFGA_PLB32,
+			TAISHAN_PCI_CFGD_PLB32);
+	hose->set_cfg_type = 1;
+
+	hose->last_busno = pciauto_bus_scan(hose, hose->first_busno);
+
+	ppc_md.pci_swizzle = common_swizzle;
+	ppc_md.pci_map_irq = taishan_map_irq;
+}
+
+
+static void __init
+taishan_early_serial_map(void)
+{
+	struct uart_port port;
+
+	/* Setup ioremapped serial port access */
+	memset(&port, 0, sizeof(port));
+	port.membase = ioremap64(PPC440GX_UART0_ADDR, 8);
+	port.irq = UART0_INT;
+	port.uartclk = clocks.uart0;
+	port.regshift = 0;
+	port.iotype = UPIO_MEM;
+	port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
+	port.line = 0;
+
+	if (early_serial_setup(&port) != 0)
+		printk("Early serial init of port 0 failed\n");
+
+#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
+	/* Configure debug serial access */
+	gen550_init(0, &port);
+
+	/* Purge TLB entry added in head_44x.S for early serial access */
+	_tlbie(UART0_IO_BASE);
+#endif
+
+	port.membase = ioremap64(PPC440GX_UART1_ADDR, 8);
+	port.irq = UART1_INT;
+	port.uartclk = clocks.uart1;
+	port.line = 1;
+
+	if (early_serial_setup(&port) != 0)
+		printk("Early serial init of port 1 failed\n");
+
+#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
+	/* Configure debug serial access */
+	gen550_init(1, &port);
+#endif
+}
+
+static void __init
+taishan_setup_arch(void)
+{
+	taishan_set_emacdata();
+
+	ibm440gx_tah_enable();
+
+	/*
+	 * Determine various clocks.
+	 * To be completely correct we should get SysClk
+	 * from FPGA, because it can be changed by on-board switches
+	 * --ebs
+	 */
+	ibm440gx_get_clocks(&clocks, 33333333, 6 * 1843200);
+	ocp_sys_info.opb_bus_freq = clocks.opb;
+
+	/* init to some ~sane value until calibrate_delay() runs */
+        loops_per_jiffy = 50000000/HZ;
+
+	/* Setup PCI host bridge */
+	taishan_setup_hose();
+
+#ifdef CONFIG_BLK_DEV_INITRD
+	if (initrd_start)
+		ROOT_DEV = Root_RAM0;
+	else
+#endif
+#ifdef CONFIG_ROOT_NFS
+		ROOT_DEV = Root_NFS;
+#else
+		ROOT_DEV = Root_HDA1;
+#endif
+
+	taishan_early_serial_map();
+
+	/* Identify the system */
+	printk("AMCC PowerPC 440GX Taishan Platform\n");
+}
+
+static void __init taishan_init(void)
+{
+	ibm440gx_l2c_setup(&clocks);
+}
+
+void __init platform_init(unsigned long r3, unsigned long r4,
+		unsigned long r5, unsigned long r6, unsigned long r7)
+{
+	ibm44x_platform_init(r3, r4, r5, r6, r7);
+
+	ppc_md.setup_arch = taishan_setup_arch;
+	ppc_md.show_cpuinfo = taishan_show_cpuinfo;
+	ppc_md.get_irq = NULL;		/* Set in ppc4xx_pic_init() */
+
+	ppc_md.calibrate_decr = taishan_calibrate_decr;
+
+#ifdef CONFIG_KGDB
+	ppc_md.early_serial_map = taishan_early_serial_map;
+#endif
+	ppc_md.init = taishan_init;
+}
+
diff --git a/arch/ppc/platforms/4xx/taishan.h b/arch/ppc/platforms/4xx/taishan.h
new file mode 100644
index 00000000000..ea7561a8045
--- /dev/null
+++ b/arch/ppc/platforms/4xx/taishan.h
@@ -0,0 +1,67 @@
+/*
+ * arch/ppc/platforms/4xx/taishan.h
+ *
+ * AMCC Taishan board definitions
+ *
+ * Copyright 2007 DENX Software Engineering, Stefan Roese <sr@denx.de>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+
+#ifdef __KERNEL__
+#ifndef __ASM_TAISHAN_H__
+#define __ASM_TAISHAN_H__
+
+#include <platforms/4xx/ibm440gx.h>
+
+/* External timer clock frequency */
+#define TAISHAN_TMR_CLK	25000000
+
+/* Flash */
+#define TAISHAN_FPGA_ADDR		0x0000000141000000ULL
+#define TAISHAN_LCM_ADDR		0x0000000142000000ULL
+#define TAISHAN_FLASH_ADDR		0x00000001fc000000ULL
+#define TAISHAN_FLASH_SIZE		0x4000000
+
+/*
+ * Serial port defines
+ */
+#define RS_TABLE_SIZE	2
+
+/* head_44x.S created UART mapping, used before early_serial_setup.
+ * We cannot use default OpenBIOS UART mappings because they
+ * don't work for configurations with more than 512M RAM.    --ebs
+ */
+#define UART0_IO_BASE	0xF0000200
+#define UART1_IO_BASE	0xF0000300
+
+#define BASE_BAUD	11059200/16
+#define STD_UART_OP(num)					\
+	{ 0, BASE_BAUD, 0, UART##num##_INT,			\
+		(ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST),	\
+		iomem_base: (void*)UART##num##_IO_BASE,		\
+		io_type: SERIAL_IO_MEM},
+
+#define SERIAL_PORT_DFNS	\
+	STD_UART_OP(0)		\
+	STD_UART_OP(1)
+
+/* PCI support */
+#define TAISHAN_PCI_LOWER_IO	0x00000000
+#define TAISHAN_PCI_UPPER_IO	0x0000ffff
+#define TAISHAN_PCI_LOWER_MEM	0x80000000
+#define TAISHAN_PCI_UPPER_MEM	0xffffefff
+
+#define TAISHAN_PCI_CFGA_PLB32	0x0ec00000
+#define TAISHAN_PCI_CFGD_PLB32	0x0ec00004
+
+#define TAISHAN_PCI_IO_BASE	0x0000000208000000ULL
+#define TAISHAN_PCI_IO_SIZE	0x00010000
+#define TAISHAN_PCI_MEM_OFFSET	0x00000000
+
+#endif				/* __ASM_TAISHAN_H__ */
+#endif				/* __KERNEL__ */
diff --git a/arch/ppc/syslib/Makefile b/arch/ppc/syslib/Makefile
index d84f0466697..09911118c67 100644
--- a/arch/ppc/syslib/Makefile
+++ b/arch/ppc/syslib/Makefile
@@ -69,6 +69,7 @@ obj-$(CONFIG_SANDPOINT)		+= pci_auto.o todc_time.o
 obj-$(CONFIG_SBC82xx)		+= todc_time.o
 obj-$(CONFIG_SPRUCE)		+= cpc700_pic.o pci_auto.o \
 				   todc_time.o
+obj-$(CONFIG_TAISHAN)		+= pci_auto.o
 obj-$(CONFIG_8260)		+= m8260_setup.o pq2_devices.o pq2_sys.o \
 				   ppc_sys.o
 obj-$(CONFIG_PCI_8260)		+= m82xx_pci.o pci_auto.o