[S390] head.S code moving.

There is almost no room left for any new code between 0x10000
and 0x10480. Move the code from 0x10000 to 0x11000.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

1 files changed, 38 insertions, 39 deletions

diff --git a/arch/s390/kernel/head31.S b/arch/s390/kernel/head31.S
index 8f38bfd642c..d00de17b377 100644
--- a/arch/s390/kernel/head31.S
+++ b/arch/s390/kernel/head31.S
@@ -1,7 +1,7 @@
 /*
  * arch/s390/kernel/head31.S
  *
- * (C) Copyright IBM Corp. 2005
+ * Copyright (C) IBM Corp. 2005,2006
  *
  *   Author(s):	Hartmut Penner <hp@de.ibm.com>
  *		Martin Schwidefsky <schwidefsky@de.ibm.com>
@@ -16,12 +16,31 @@
 # or linload or SALIPL
 #
 	.org	0x10000
-startup:basr	%r13,0			 # get base
-.LPG1:	l	%r1, .Lget_ipl_device_addr-.LPG1(%r13)
-	basr	%r14, %r1
+startup:basr	%r13,0			# get base
+.LPG0:	l	%r13,0f-.LPG0(%r13)
+	b	0(%r13)
+0:	.long	startup_continue
+
+#
+# params at 10400 (setup.h)
+#
+	.org	PARMAREA
+	.long	0,0			# IPL_DEVICE
+	.long	0,RAMDISK_ORIGIN	# INITRD_START
+	.long	0,RAMDISK_SIZE		# INITRD_SIZE
+
+	.org	COMMAND_LINE
+	.byte	"root=/dev/ram0 ro"
+	.byte	0
+
+	.org	0x11000
+
+startup_continue:
+	basr	%r13,0			# get base
+.LPG1:	GET_IPL_DEVICE
 	lctl	%c0,%c15,.Lctl-.LPG1(%r13) # load control registers
-	la	%r12,_pstart-.LPG1(%r13) # pointer to parameter area
-					 # move IPL device to lowcore
+	l	%r12,.Lparmaddr-.LPG1(%r13) # pointer to parameter area
+					# move IPL device to lowcore
 	mvc	__LC_IPLDEV(4),IPL_DEVICE-PARMAREA(%r12)
 
 #
@@ -51,8 +70,8 @@ startup:basr	%r13,0			 # get base
 	a	%r1,__LC_EXT_NEW_PSW+4	# set handler
 	st	%r1,__LC_EXT_NEW_PSW+4
 
-	la	%r4,_pstart-.LPG1(%r13)	# %r4 is our index for sccb stuff
-	la	%r1, .Lsccb-PARMAREA(%r4)	# our sccb
+	l	%r4,.Lsccbaddr-.LPG1(%r13) # %r4 is our index for sccb stuff
+	lr	%r1,%r4			# our sccb
 	.insn	rre,0xb2200000,%r2,%r1	# service call
 	ipm	%r1
 	srl	%r1,28			# get cc code
@@ -63,7 +82,7 @@ startup:basr	%r13,0			 # get base
 	be	.Lservicecall-.LPG1(%r13)
 	lpsw	.Lwaitsclp-.LPG1(%r13)
 .Lsclph:
-	lh	%r1,.Lsccbr-PARMAREA(%r4)
+	lh	%r1,.Lsccbr-.Lsccb(%r4)
 	chi	%r1,0x10		# 0x0010 is the sucess code
 	je	.Lprocsccb		# let's process the sccb
 	chi	%r1,0x1f0
@@ -74,7 +93,7 @@ startup:basr	%r13,0			 # get base
 	b	.Lservicecall-.LPG1(%r13)
 .Lprocsccb:
 	lhi	%r1,0
-	icm	%r1,3,.Lscpincr1-PARMAREA(%r4) # use this one if != 0
+	icm	%r1,3,.Lscpincr1-.Lsccb(%r4) # use this one if != 0
 	jnz	.Lscnd
 	lhi	%r1,0x800		# otherwise report 2GB
 .Lscnd:
@@ -84,10 +103,10 @@ startup:basr	%r13,0			 # get base
 	lr	%r1,%r3
 .Lno2gb:
 	xr	%r3,%r3			# same logic
-	ic	%r3,.Lscpa1-PARMAREA(%r4)
+	ic	%r3,.Lscpa1-.Lsccb(%r4)
 	chi	%r3,0x00
 	jne	.Lcompmem
-	l	%r3,.Lscpa2-PARMAREA(%r4)
+	l	%r3,.Lscpa2-.Lsccb(%r4)
 .Lcompmem:
 	mr	%r2,%r1			# mem in MB on 128-bit
 	l	%r1,.Lonemb-.LPG1(%r13)
@@ -95,8 +114,6 @@ startup:basr	%r13,0			 # get base
 	b	.Lfchunk-.LPG1(%r13)
 
 	.align 4
-.Lget_ipl_device_addr:
-	.long	.Lget_ipl_device
 .Lpmask:
 	.byte	0
 .align 8
@@ -242,6 +259,8 @@ startup:basr	%r13,0			 # get base
 	.long	0			# cr13: home space segment table
 	.long	0xc0000000		# cr14: machine check handling off
 	.long	0			# cr15: linkage stack operations
+.Lduct:	.long	0,0,0,0,0,0,0,0
+	.long	0,0,0,0,0,0,0,0
 .Lpcmem:.long	0x00080000,0x80000000 + .Lchkmem
 .Lpcfpu:.long	0x00080000,0x80000000 + .Lchkfpu
 .Lpccsp:.long	0x00080000,0x80000000 + .Lchkcsp
@@ -252,25 +271,9 @@ startup:basr	%r13,0			 # get base
 .Lmflags:.long	machine_flags
 .Lbss_bgn:  .long __bss_start
 .Lbss_end:  .long _end
-
-	.org	PARMAREA-64
-.Lduct:	.long	0,0,0,0,0,0,0,0
-	.long	0,0,0,0,0,0,0,0
-
-#
-# params at 10400 (setup.h)
-#
-	.org	PARMAREA
-	.global _pstart
-_pstart:
-	.long	0,0			# IPL_DEVICE
-	.long	0,RAMDISK_ORIGIN	# INITRD_START
-	.long	0,RAMDISK_SIZE		# INITRD_SIZE
-
-	.org	COMMAND_LINE
-	.byte	"root=/dev/ram0 ro"
-	.byte	0
-	.org	0x11000
+.Lparmaddr: .long PARMAREA
+.Lsccbaddr: .long .Lsccb
+	.align	4096
 .Lsccb:
 	.hword	0x1000			# length, one page
 	.byte	0x00,0x00,0x00
@@ -287,18 +290,14 @@ _pstart:
 .Lscpincr2:
 	.quad	0x00
 	.fill	3984,1,0
-	.org	0x12000
-	.global	_pend
-_pend:
-
-	GET_IPL_DEVICE
+	.align	4096
 
 #ifdef CONFIG_SHARED_KERNEL
 	.org	0x100000
 #endif
 
 #
-# startup-code, running in virtual mode
+# startup-code, running in absolute addressing mode
 #
 	.globl	_stext
 _stext:	basr	%r13,0			# get base