s390/pci: uninline instruction wrappers

Uninline pci related instruction wrappers to de-bloat the code:
add/remove: 15/0 grow/shrink: 2/24 up/down: 1326/-12628 (-11302)

This is especially useful for the inlined pci read and write functions
which are used all over the kernel. Also remove the unused __stpcifc
while at it.

Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

3 files changed, 202 insertions, 199 deletions

diff --git a/arch/s390/include/asm/pci_insn.h b/arch/s390/include/asm/pci_insn.h
index 1486a98d5da..c6649e72cf4 100644
--- a/arch/s390/include/asm/pci_insn.h
+++ b/arch/s390/include/asm/pci_insn.h
@@ -1,10 +1,6 @@
 #ifndef _ASM_S390_PCI_INSN_H
 #define _ASM_S390_PCI_INSN_H
 
-#include <linux/delay.h>
-
-#define ZPCI_INSN_BUSY_DELAY	1	/* 1 microsecond */
-
 /* Load/Store status codes */
 #define ZPCI_PCI_ST_FUNC_NOT_ENABLED		4
 #define ZPCI_PCI_ST_FUNC_IN_ERR			8
@@ -82,199 +78,12 @@ struct zpci_fib {
 	u64 reserved7;
 } __packed;
 
-/* Modify PCI Function Controls */
-static inline u8 __mpcifc(u64 req, struct zpci_fib *fib, u8 *status)
-{
-	u8 cc;
-
-	asm volatile (
-		"	.insn	rxy,0xe300000000d0,%[req],%[fib]\n"
-		"	ipm	%[cc]\n"
-		"	srl	%[cc],28\n"
-		: [cc] "=d" (cc), [req] "+d" (req), [fib] "+Q" (*fib)
-		: : "cc");
-	*status = req >> 24 & 0xff;
-	return cc;
-}
-
-static inline int mpcifc_instr(u64 req, struct zpci_fib *fib)
-{
-	u8 cc, status;
-
-	do {
-		cc = __mpcifc(req, fib, &status);
-		if (cc == 2)
-			msleep(ZPCI_INSN_BUSY_DELAY);
-	} while (cc == 2);
-
-	if (cc)
-		printk_once(KERN_ERR "%s: error cc: %d  status: %d\n",
-			     __func__, cc, status);
-	return (cc) ? -EIO : 0;
-}
-
-/* Refresh PCI Translations */
-static inline u8 __rpcit(u64 fn, u64 addr, u64 range, u8 *status)
-{
-	register u64 __addr asm("2") = addr;
-	register u64 __range asm("3") = range;
-	u8 cc;
-
-	asm volatile (
-		"	.insn	rre,0xb9d30000,%[fn],%[addr]\n"
-		"	ipm	%[cc]\n"
-		"	srl	%[cc],28\n"
-		: [cc] "=d" (cc), [fn] "+d" (fn)
-		: [addr] "d" (__addr), "d" (__range)
-		: "cc");
-	*status = fn >> 24 & 0xff;
-	return cc;
-}
-
-static inline int rpcit_instr(u64 fn, u64 addr, u64 range)
-{
-	u8 cc, status;
-
-	do {
-		cc = __rpcit(fn, addr, range, &status);
-		if (cc == 2)
-			udelay(ZPCI_INSN_BUSY_DELAY);
-	} while (cc == 2);
-
-	if (cc)
-		printk_once(KERN_ERR "%s: error cc: %d  status: %d  dma_addr: %Lx  size: %Lx\n",
-			    __func__, cc, status, addr, range);
-	return (cc) ? -EIO : 0;
-}
-
-/* Store PCI function controls */
-static inline u8 __stpcifc(u32 handle, u8 space, struct zpci_fib *fib, u8 *status)
-{
-	u64 fn = (u64) handle << 32 | space << 16;
-	u8 cc;
-
-	asm volatile (
-		"	.insn	rxy,0xe300000000d4,%[fn],%[fib]\n"
-		"	ipm	%[cc]\n"
-		"	srl	%[cc],28\n"
-		: [cc] "=d" (cc), [fn] "+d" (fn), [fib] "=m" (*fib)
-		: : "cc");
-	*status = fn >> 24 & 0xff;
-	return cc;
-}
-
-/* Set Interruption Controls */
-static inline void sic_instr(u16 ctl, char *unused, u8 isc)
-{
-	asm volatile (
-		"	.insn	rsy,0xeb00000000d1,%[ctl],%[isc],%[u]\n"
-		: : [ctl] "d" (ctl), [isc] "d" (isc << 27), [u] "Q" (*unused));
-}
-
-/* PCI Load */
-static inline u8 __pcilg(u64 *data, u64 req, u64 offset, u8 *status)
-{
-	register u64 __req asm("2") = req;
-	register u64 __offset asm("3") = offset;
-	u64 __data;
-	u8 cc;
-
-	asm volatile (
-		"	.insn	rre,0xb9d20000,%[data],%[req]\n"
-		"	ipm	%[cc]\n"
-		"	srl	%[cc],28\n"
-		: [cc] "=d" (cc), [data] "=d" (__data), [req] "+d" (__req)
-		:  "d" (__offset)
-		: "cc");
-	*status = __req >> 24 & 0xff;
-	*data = __data;
-	return cc;
-}
-
-static inline int pcilg_instr(u64 *data, u64 req, u64 offset)
-{
-	u8 cc, status;
-
-	do {
-		cc = __pcilg(data, req, offset, &status);
-		if (cc == 2)
-			udelay(ZPCI_INSN_BUSY_DELAY);
-	} while (cc == 2);
-
-	if (cc) {
-		printk_once(KERN_ERR "%s: error cc: %d  status: %d  req: %Lx  offset: %Lx\n",
-			    __func__, cc, status, req, offset);
-		/* TODO: on IO errors set data to 0xff...
-		 * here or in users of pcilg (le conversion)?
-		 */
-	}
-	return (cc) ? -EIO : 0;
-}
-
-/* PCI Store */
-static inline u8 __pcistg(u64 data, u64 req, u64 offset, u8 *status)
-{
-	register u64 __req asm("2") = req;
-	register u64 __offset asm("3") = offset;
-	u8 cc;
-
-	asm volatile (
-		"	.insn	rre,0xb9d00000,%[data],%[req]\n"
-		"	ipm	%[cc]\n"
-		"	srl	%[cc],28\n"
-		: [cc] "=d" (cc), [req] "+d" (__req)
-		: "d" (__offset), [data] "d" (data)
-		: "cc");
-	*status = __req >> 24 & 0xff;
-	return cc;
-}
-
-static inline int pcistg_instr(u64 data, u64 req, u64 offset)
-{
-	u8 cc, status;
-
-	do {
-		cc = __pcistg(data, req, offset, &status);
-		if (cc == 2)
-			udelay(ZPCI_INSN_BUSY_DELAY);
-	} while (cc == 2);
-
-	if (cc)
-		printk_once(KERN_ERR "%s: error cc: %d  status: %d  req: %Lx  offset: %Lx\n",
-			__func__, cc, status, req, offset);
-	return (cc) ? -EIO : 0;
-}
-
-/* PCI Store Block */
-static inline u8 __pcistb(const u64 *data, u64 req, u64 offset, u8 *status)
-{
-	u8 cc;
-
-	asm volatile (
-		"	.insn	rsy,0xeb00000000d0,%[req],%[offset],%[data]\n"
-		"	ipm	%[cc]\n"
-		"	srl	%[cc],28\n"
-		: [cc] "=d" (cc), [req] "+d" (req)
-		: [offset] "d" (offset), [data] "Q" (*data)
-		: "cc");
-	*status = req >> 24 & 0xff;
-	return cc;
-}
-
-static inline int pcistb_instr(const u64 *data, u64 req, u64 offset)
-{
-	u8 cc, status;
-
-	do {
-		cc = __pcistb(data, req, offset, &status);
-		if (cc == 2)
-			udelay(ZPCI_INSN_BUSY_DELAY);
-	} while (cc == 2);
 
-	if (cc)
-		printk_once(KERN_ERR "%s: error cc: %d  status: %d  req: %Lx  offset: %Lx\n",
-			    __func__, cc, status, req, offset);
-	return (cc) ? -EIO : 0;
-}
+int mpcifc_instr(u64 req, struct zpci_fib *fib);
+int rpcit_instr(u64 fn, u64 addr, u64 range);
+void sic_instr(u16 ctl, char *unused, u8 isc);
+int pcilg_instr(u64 *data, u64 req, u64 offset);
+int pcistg_instr(u64 data, u64 req, u64 offset);
+int pcistb_instr(const u64 *data, u64 req, u64 offset);
 
 #endif
diff --git a/arch/s390/pci/Makefile b/arch/s390/pci/Makefile
index f0f426a113c..086a2e37935 100644
--- a/arch/s390/pci/Makefile
+++ b/arch/s390/pci/Makefile
@@ -2,5 +2,5 @@
 # Makefile for the s390 PCI subsystem.
 #
 
-obj-$(CONFIG_PCI)	+= pci.o pci_dma.o pci_clp.o pci_msi.o \
-			   pci_sysfs.o pci_event.o pci_debug.o
+obj-$(CONFIG_PCI)	+= pci.o pci_dma.o pci_clp.o pci_msi.o pci_sysfs.o \
+			   pci_event.o pci_debug.o pci_insn.o
diff --git a/arch/s390/pci/pci_insn.c b/arch/s390/pci/pci_insn.c
new file mode 100644
index 00000000000..c55962529f4
--- /dev/null
+++ b/arch/s390/pci/pci_insn.c
@@ -0,0 +1,194 @@
+/*
+ * s390 specific pci instructions
+ *
+ * Copyright IBM Corp. 2013
+ */
+
+#include <linux/export.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <asm/pci_insn.h>
+
+#define ZPCI_INSN_BUSY_DELAY	1	/* 1 microsecond */
+
+/* Modify PCI Function Controls */
+static inline u8 __mpcifc(u64 req, struct zpci_fib *fib, u8 *status)
+{
+	u8 cc;
+
+	asm volatile (
+		"	.insn	rxy,0xe300000000d0,%[req],%[fib]\n"
+		"	ipm	%[cc]\n"
+		"	srl	%[cc],28\n"
+		: [cc] "=d" (cc), [req] "+d" (req), [fib] "+Q" (*fib)
+		: : "cc");
+	*status = req >> 24 & 0xff;
+	return cc;
+}
+
+int mpcifc_instr(u64 req, struct zpci_fib *fib)
+{
+	u8 cc, status;
+
+	do {
+		cc = __mpcifc(req, fib, &status);
+		if (cc == 2)
+			msleep(ZPCI_INSN_BUSY_DELAY);
+	} while (cc == 2);
+
+	if (cc)
+		printk_once(KERN_ERR "%s: error cc: %d  status: %d\n",
+			     __func__, cc, status);
+	return (cc) ? -EIO : 0;
+}
+
+/* Refresh PCI Translations */
+static inline u8 __rpcit(u64 fn, u64 addr, u64 range, u8 *status)
+{
+	register u64 __addr asm("2") = addr;
+	register u64 __range asm("3") = range;
+	u8 cc;
+
+	asm volatile (
+		"	.insn	rre,0xb9d30000,%[fn],%[addr]\n"
+		"	ipm	%[cc]\n"
+		"	srl	%[cc],28\n"
+		: [cc] "=d" (cc), [fn] "+d" (fn)
+		: [addr] "d" (__addr), "d" (__range)
+		: "cc");
+	*status = fn >> 24 & 0xff;
+	return cc;
+}
+
+int rpcit_instr(u64 fn, u64 addr, u64 range)
+{
+	u8 cc, status;
+
+	do {
+		cc = __rpcit(fn, addr, range, &status);
+		if (cc == 2)
+			udelay(ZPCI_INSN_BUSY_DELAY);
+	} while (cc == 2);
+
+	if (cc)
+		printk_once(KERN_ERR "%s: error cc: %d  status: %d  dma_addr: %Lx  size: %Lx\n",
+			    __func__, cc, status, addr, range);
+	return (cc) ? -EIO : 0;
+}
+
+/* Set Interruption Controls */
+void sic_instr(u16 ctl, char *unused, u8 isc)
+{
+	asm volatile (
+		"	.insn	rsy,0xeb00000000d1,%[ctl],%[isc],%[u]\n"
+		: : [ctl] "d" (ctl), [isc] "d" (isc << 27), [u] "Q" (*unused));
+}
+
+/* PCI Load */
+static inline u8 __pcilg(u64 *data, u64 req, u64 offset, u8 *status)
+{
+	register u64 __req asm("2") = req;
+	register u64 __offset asm("3") = offset;
+	u64 __data;
+	u8 cc;
+
+	asm volatile (
+		"	.insn	rre,0xb9d20000,%[data],%[req]\n"
+		"	ipm	%[cc]\n"
+		"	srl	%[cc],28\n"
+		: [cc] "=d" (cc), [data] "=d" (__data), [req] "+d" (__req)
+		:  "d" (__offset)
+		: "cc");
+	*status = __req >> 24 & 0xff;
+	*data = __data;
+	return cc;
+}
+
+int pcilg_instr(u64 *data, u64 req, u64 offset)
+{
+	u8 cc, status;
+
+	do {
+		cc = __pcilg(data, req, offset, &status);
+		if (cc == 2)
+			udelay(ZPCI_INSN_BUSY_DELAY);
+	} while (cc == 2);
+
+	if (cc) {
+		printk_once(KERN_ERR "%s: error cc: %d  status: %d  req: %Lx  offset: %Lx\n",
+			    __func__, cc, status, req, offset);
+		/* TODO: on IO errors set data to 0xff...
+		 * here or in users of pcilg (le conversion)?
+		 */
+	}
+	return (cc) ? -EIO : 0;
+}
+EXPORT_SYMBOL_GPL(pcilg_instr);
+
+/* PCI Store */
+static inline u8 __pcistg(u64 data, u64 req, u64 offset, u8 *status)
+{
+	register u64 __req asm("2") = req;
+	register u64 __offset asm("3") = offset;
+	u8 cc;
+
+	asm volatile (
+		"	.insn	rre,0xb9d00000,%[data],%[req]\n"
+		"	ipm	%[cc]\n"
+		"	srl	%[cc],28\n"
+		: [cc] "=d" (cc), [req] "+d" (__req)
+		: "d" (__offset), [data] "d" (data)
+		: "cc");
+	*status = __req >> 24 & 0xff;
+	return cc;
+}
+
+int pcistg_instr(u64 data, u64 req, u64 offset)
+{
+	u8 cc, status;
+
+	do {
+		cc = __pcistg(data, req, offset, &status);
+		if (cc == 2)
+			udelay(ZPCI_INSN_BUSY_DELAY);
+	} while (cc == 2);
+
+	if (cc)
+		printk_once(KERN_ERR "%s: error cc: %d  status: %d  req: %Lx  offset: %Lx\n",
+			__func__, cc, status, req, offset);
+	return (cc) ? -EIO : 0;
+}
+EXPORT_SYMBOL_GPL(pcistg_instr);
+
+/* PCI Store Block */
+static inline u8 __pcistb(const u64 *data, u64 req, u64 offset, u8 *status)
+{
+	u8 cc;
+
+	asm volatile (
+		"	.insn	rsy,0xeb00000000d0,%[req],%[offset],%[data]\n"
+		"	ipm	%[cc]\n"
+		"	srl	%[cc],28\n"
+		: [cc] "=d" (cc), [req] "+d" (req)
+		: [offset] "d" (offset), [data] "Q" (*data)
+		: "cc");
+	*status = req >> 24 & 0xff;
+	return cc;
+}
+
+int pcistb_instr(const u64 *data, u64 req, u64 offset)
+{
+	u8 cc, status;
+
+	do {
+		cc = __pcistb(data, req, offset, &status);
+		if (cc == 2)
+			udelay(ZPCI_INSN_BUSY_DELAY);
+	} while (cc == 2);
+
+	if (cc)
+		printk_once(KERN_ERR "%s: error cc: %d  status: %d  req: %Lx  offset: %Lx\n",
+			    __func__, cc, status, req, offset);
+	return (cc) ? -EIO : 0;
+}
+EXPORT_SYMBOL_GPL(pcistb_instr);