Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (26 commits)
  mmc: SDHI should depend on SUPERH || ARCH_SHMOBILE
  mmc: tmio_mmc: Move some defines into a shared header
  mmc: tmio: support aggressive clock gating
  mmc: tmio: fix power-mode interpretation
  mmc: tmio: remove work-around for unmasked SDIO interrupts
  sh: fix SDHI IO address-range
  ARM: mach-shmobile: fix SDHI IO address-range
  mmc: tmio: only access registers above 0xff, if available
  mfd: remove now redundant sh_mobile_sdhi.h header
  sh: convert boards to use linux/mmc/sh_mobile_sdhi.h
  ARM: mach-shmobile: convert boards to use linux/mmc/sh_mobile_sdhi.h
  mmc: tmio: convert the SDHI MMC driver from MFD to a platform driver
  sh: ecovec: use the CONFIG_MMC_TMIO symbols instead of MFD
  mmc: tmio: split core functionality, DMA and MFD glue
  mmc: tmio: use PIO for short transfers
  mmc: tmio-mmc: Improve DMA stability on sh-mobile
  mmc: fix mmc_app_send_scr() for dma transfer
  mmc: sdhci-esdhc: enable esdhc on imx53
  mmc: sdhci-esdhc: use writel/readl as general APIs
  mmc: sdhci: add the abort CMDTYPE bits definition
  ...

1 files changed, 6 insertions, 6 deletions

diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c
index 3fbae0d0b6c..fd4ff25f23b 100644
--- a/arch/sh/boards/mach-ecovec24/setup.c
+++ b/arch/sh/boards/mach-ecovec24/setup.c
@@ -11,9 +11,9 @@
 #include <linux/init.h>
 #include <linux/device.h>
 #include <linux/platform_device.h>
-#include <linux/mfd/sh_mobile_sdhi.h>
 #include <linux/mmc/host.h>
 #include <linux/mmc/sh_mmcif.h>
+#include <linux/mmc/sh_mobile_sdhi.h>
 #include <linux/mtd/physmap.h>
 #include <linux/gpio.h>
 #include <linux/interrupt.h>
@@ -464,7 +464,7 @@ static struct i2c_board_info ts_i2c_clients = {
 	.irq		= IRQ0,
 };
 
-#ifdef CONFIG_MFD_SH_MOBILE_SDHI
+#if defined(CONFIG_MMC_TMIO) || defined(CONFIG_MMC_TMIO_MODULE)
 /* SDHI0 */
 static void sdhi0_set_pwr(struct platform_device *pdev, int state)
 {
@@ -482,7 +482,7 @@ static struct resource sdhi0_resources[] = {
 	[0] = {
 		.name	= "SDHI0",
 		.start  = 0x04ce0000,
-		.end    = 0x04ce01ff,
+		.end    = 0x04ce00ff,
 		.flags  = IORESOURCE_MEM,
 	},
 	[1] = {
@@ -522,7 +522,7 @@ static struct resource sdhi1_resources[] = {
 	[0] = {
 		.name	= "SDHI1",
 		.start  = 0x04cf0000,
-		.end    = 0x04cf01ff,
+		.end    = 0x04cf00ff,
 		.flags  = IORESOURCE_MEM,
 	},
 	[1] = {
@@ -880,7 +880,7 @@ static struct platform_device *ecovec_devices[] __initdata = {
 	&ceu0_device,
 	&ceu1_device,
 	&keysc_device,
-#ifdef CONFIG_MFD_SH_MOBILE_SDHI
+#if defined(CONFIG_MMC_TMIO) || defined(CONFIG_MMC_TMIO_MODULE)
 	&sdhi0_device,
 #if !defined(CONFIG_MMC_SH_MMCIF)
 	&sdhi1_device,
@@ -1162,7 +1162,7 @@ static int __init arch_setup(void)
 	gpio_direction_input(GPIO_PTR5);
 	gpio_direction_input(GPIO_PTR6);
 
-#ifdef CONFIG_MFD_SH_MOBILE_SDHI
+#if defined(CONFIG_MMC_TMIO) || defined(CONFIG_MMC_TMIO_MODULE)
 	/* enable SDHI0 on CN11 (needs DS2.4 set to ON) */
 	gpio_request(GPIO_FN_SDHI0CD,  NULL);
 	gpio_request(GPIO_FN_SDHI0WP,  NULL);