Merge branch 'linux-2.6'

25 files changed, 843 insertions, 796 deletions

diff --git a/arch/sh/boards/cayman/Makefile b/arch/sh/boards/cayman/Makefile
new file mode 100644
index 00000000000..489a8f86736
--- /dev/null
+++ b/arch/sh/boards/cayman/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the Hitachi Cayman specific parts of the kernel
+#
+obj-y := setup.o irq.o
+obj-$(CONFIG_HEARTBEAT)	+= led.o
diff --git a/arch/sh/boards/cayman/irq.c b/arch/sh/boards/cayman/irq.c
new file mode 100644
index 00000000000..30ec7bebfaf
--- /dev/null
+++ b/arch/sh/boards/cayman/irq.c
@@ -0,0 +1,197 @@
+/*
+ * arch/sh/mach-cayman/irq.c - SH-5 Cayman Interrupt Support
+ *
+ * This file handles the board specific parts of the Cayman interrupt system
+ *
+ * Copyright (C) 2002 Stuart Menefy
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/signal.h>
+#include <asm/cpu/irq.h>
+#include <asm/page.h>
+
+/* Setup for the SMSC FDC37C935 / LAN91C100FD */
+#define SMSC_IRQ         IRQ_IRL1
+
+/* Setup for PCI Bus 2, which transmits interrupts via the EPLD */
+#define PCI2_IRQ         IRQ_IRL3
+
+unsigned long epld_virt;
+
+#define EPLD_BASE        0x04002000
+#define EPLD_STATUS_BASE (epld_virt + 0x10)
+#define EPLD_MASK_BASE   (epld_virt + 0x20)
+
+/* Note the SMSC SuperIO chip and SMSC LAN chip interrupts are all muxed onto
+   the same SH-5 interrupt */
+
+static irqreturn_t cayman_interrupt_smsc(int irq, void *dev_id)
+{
+        printk(KERN_INFO "CAYMAN: spurious SMSC interrupt\n");
+	return IRQ_NONE;
+}
+
+static irqreturn_t cayman_interrupt_pci2(int irq, void *dev_id)
+{
+        printk(KERN_INFO "CAYMAN: spurious PCI interrupt, IRQ %d\n", irq);
+	return IRQ_NONE;
+}
+
+static struct irqaction cayman_action_smsc = {
+	.name		= "Cayman SMSC Mux",
+	.handler	= cayman_interrupt_smsc,
+	.flags		= IRQF_DISABLED,
+};
+
+static struct irqaction cayman_action_pci2 = {
+	.name		= "Cayman PCI2 Mux",
+	.handler	= cayman_interrupt_pci2,
+	.flags		= IRQF_DISABLED,
+};
+
+static void enable_cayman_irq(unsigned int irq)
+{
+	unsigned long flags;
+	unsigned long mask;
+	unsigned int reg;
+	unsigned char bit;
+
+	irq -= START_EXT_IRQS;
+	reg = EPLD_MASK_BASE + ((irq / 8) << 2);
+	bit = 1<<(irq % 8);
+	local_irq_save(flags);
+	mask = ctrl_inl(reg);
+	mask |= bit;
+	ctrl_outl(mask, reg);
+	local_irq_restore(flags);
+}
+
+void disable_cayman_irq(unsigned int irq)
+{
+	unsigned long flags;
+	unsigned long mask;
+	unsigned int reg;
+	unsigned char bit;
+
+	irq -= START_EXT_IRQS;
+	reg = EPLD_MASK_BASE + ((irq / 8) << 2);
+	bit = 1<<(irq % 8);
+	local_irq_save(flags);
+	mask = ctrl_inl(reg);
+	mask &= ~bit;
+	ctrl_outl(mask, reg);
+	local_irq_restore(flags);
+}
+
+static void ack_cayman_irq(unsigned int irq)
+{
+	disable_cayman_irq(irq);
+}
+
+static void end_cayman_irq(unsigned int irq)
+{
+	if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
+		enable_cayman_irq(irq);
+}
+
+static unsigned int startup_cayman_irq(unsigned int irq)
+{
+	enable_cayman_irq(irq);
+	return 0; /* never anything pending */
+}
+
+static void shutdown_cayman_irq(unsigned int irq)
+{
+	disable_cayman_irq(irq);
+}
+
+struct hw_interrupt_type cayman_irq_type = {
+	.typename	= "Cayman-IRQ",
+	.startup	= startup_cayman_irq,
+	.shutdown	= shutdown_cayman_irq,
+	.enable		= enable_cayman_irq,
+	.disable	= disable_cayman_irq,
+	.ack		= ack_cayman_irq,
+	.end		= end_cayman_irq,
+};
+
+int cayman_irq_demux(int evt)
+{
+	int irq = intc_evt_to_irq[evt];
+
+	if (irq == SMSC_IRQ) {
+		unsigned long status;
+		int i;
+
+		status = ctrl_inl(EPLD_STATUS_BASE) &
+			 ctrl_inl(EPLD_MASK_BASE) & 0xff;
+		if (status == 0) {
+			irq = -1;
+		} else {
+			for (i=0; i<8; i++) {
+				if (status & (1<<i))
+					break;
+			}
+			irq = START_EXT_IRQS + i;
+		}
+	}
+
+	if (irq == PCI2_IRQ) {
+		unsigned long status;
+		int i;
+
+		status = ctrl_inl(EPLD_STATUS_BASE + 3 * sizeof(u32)) &
+			 ctrl_inl(EPLD_MASK_BASE + 3 * sizeof(u32)) & 0xff;
+		if (status == 0) {
+			irq = -1;
+		} else {
+			for (i=0; i<8; i++) {
+				if (status & (1<<i))
+					break;
+			}
+			irq = START_EXT_IRQS + (3 * 8) + i;
+		}
+	}
+
+	return irq;
+}
+
+#if defined(CONFIG_PROC_FS) && defined(CONFIG_SYSCTL)
+int cayman_irq_describe(char* p, int irq)
+{
+	if (irq < NR_INTC_IRQS) {
+		return intc_irq_describe(p, irq);
+	} else if (irq < NR_INTC_IRQS + 8) {
+		return sprintf(p, "(SMSC %d)", irq - NR_INTC_IRQS);
+	} else if ((irq >= NR_INTC_IRQS + 24) && (irq < NR_INTC_IRQS + 32)) {
+		return sprintf(p, "(PCI2 %d)", irq - (NR_INTC_IRQS + 24));
+	}
+
+	return 0;
+}
+#endif
+
+void init_cayman_irq(void)
+{
+	int i;
+
+	epld_virt = onchip_remap(EPLD_BASE, 1024, "EPLD");
+	if (!epld_virt) {
+		printk(KERN_ERR "Cayman IRQ: Unable to remap EPLD\n");
+		return;
+	}
+
+	for (i=0; i<NR_EXT_IRQS; i++) {
+		irq_desc[START_EXT_IRQS + i].chip = &cayman_irq_type;
+	}
+
+	/* Setup the SMSC interrupt */
+	setup_irq(SMSC_IRQ, &cayman_action_smsc);
+	setup_irq(PCI2_IRQ, &cayman_action_pci2);
+}
diff --git a/arch/sh/boards/cayman/led.c b/arch/sh/boards/cayman/led.c
new file mode 100644
index 00000000000..a808eac4ecd
--- /dev/null
+++ b/arch/sh/boards/cayman/led.c
@@ -0,0 +1,51 @@
+/*
+ * arch/sh/boards/cayman/led.c
+ *
+ * Copyright (C) 2002 Stuart Menefy <stuart.menefy@st.com>
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License.  See linux/COPYING for more information.
+ *
+ * Flash the LEDs
+ */
+#include <asm/io.h>
+
+/*
+** It is supposed these functions to be used for a low level
+** debugging (via Cayman LEDs), hence to be available as soon
+** as possible.
+** Unfortunately Cayman LEDs relies on Cayman EPLD to be mapped
+** (this happen when IRQ are initialized... quite late).
+** These triky dependencies should be removed. Temporary, it
+** may be enough to NOP until EPLD is mapped.
+*/
+
+extern unsigned long epld_virt;
+
+#define LED_ADDR      (epld_virt + 0x008)
+#define HDSP2534_ADDR (epld_virt + 0x100)
+
+void mach_led(int position, int value)
+{
+	if (!epld_virt)
+		return;
+
+	if (value)
+		ctrl_outl(0, LED_ADDR);
+	else
+		ctrl_outl(1, LED_ADDR);
+
+}
+
+void mach_alphanum(int position, unsigned char value)
+{
+	if (!epld_virt)
+		return;
+
+	ctrl_outb(value, HDSP2534_ADDR + 0xe0 + (position << 2));
+}
+
+void mach_alphanum_brightness(int setting)
+{
+	ctrl_outb(setting & 7, HDSP2534_ADDR + 0xc0);
+}
diff --git a/arch/sh/boards/cayman/setup.c b/arch/sh/boards/cayman/setup.c
new file mode 100644
index 00000000000..8c9fa472d8f
--- /dev/null
+++ b/arch/sh/boards/cayman/setup.c
@@ -0,0 +1,187 @@
+/*
+ * arch/sh/mach-cayman/setup.c
+ *
+ * SH5 Cayman support
+ *
+ * Copyright (C) 2002  David J. Mckay & Benedict Gaster
+ * Copyright (C) 2003 - 2007  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <asm/cpu/irq.h>
+
+/*
+ * Platform Dependent Interrupt Priorities.
+ */
+
+/* Using defaults defined in irq.h */
+#define	RES NO_PRIORITY		/* Disabled */
+#define IR0 IRL0_PRIORITY	/* IRLs */
+#define IR1 IRL1_PRIORITY
+#define IR2 IRL2_PRIORITY
+#define IR3 IRL3_PRIORITY
+#define PCA INTA_PRIORITY	/* PCI Ints */
+#define PCB INTB_PRIORITY
+#define PCC INTC_PRIORITY
+#define PCD INTD_PRIORITY
+#define SER TOP_PRIORITY
+#define ERR TOP_PRIORITY
+#define PW0 TOP_PRIORITY
+#define PW1 TOP_PRIORITY
+#define PW2 TOP_PRIORITY
+#define PW3 TOP_PRIORITY
+#define DM0 NO_PRIORITY		/* DMA Ints */
+#define DM1 NO_PRIORITY
+#define DM2 NO_PRIORITY
+#define DM3 NO_PRIORITY
+#define DAE NO_PRIORITY
+#define TU0 TIMER_PRIORITY	/* TMU Ints */
+#define TU1 NO_PRIORITY
+#define TU2 NO_PRIORITY
+#define TI2 NO_PRIORITY
+#define ATI NO_PRIORITY		/* RTC Ints */
+#define PRI NO_PRIORITY
+#define CUI RTC_PRIORITY
+#define ERI SCIF_PRIORITY	/* SCIF Ints */
+#define RXI SCIF_PRIORITY
+#define BRI SCIF_PRIORITY
+#define TXI SCIF_PRIORITY
+#define ITI TOP_PRIORITY	/* WDT Ints */
+
+/* Setup for the SMSC FDC37C935 */
+#define SMSC_SUPERIO_BASE	0x04000000
+#define SMSC_CONFIG_PORT_ADDR	0x3f0
+#define SMSC_INDEX_PORT_ADDR	SMSC_CONFIG_PORT_ADDR
+#define SMSC_DATA_PORT_ADDR	0x3f1
+
+#define SMSC_ENTER_CONFIG_KEY	0x55
+#define SMSC_EXIT_CONFIG_KEY	0xaa
+
+#define SMCS_LOGICAL_DEV_INDEX	0x07
+#define SMSC_DEVICE_ID_INDEX	0x20
+#define SMSC_DEVICE_REV_INDEX	0x21
+#define SMSC_ACTIVATE_INDEX	0x30
+#define SMSC_PRIMARY_BASE_INDEX  0x60
+#define SMSC_SECONDARY_BASE_INDEX 0x62
+#define SMSC_PRIMARY_INT_INDEX	0x70
+#define SMSC_SECONDARY_INT_INDEX 0x72
+
+#define SMSC_IDE1_DEVICE	1
+#define SMSC_KEYBOARD_DEVICE	7
+#define SMSC_CONFIG_REGISTERS	8
+
+#define SMSC_SUPERIO_READ_INDEXED(index) ({ \
+	outb((index), SMSC_INDEX_PORT_ADDR); \
+	inb(SMSC_DATA_PORT_ADDR); })
+#define SMSC_SUPERIO_WRITE_INDEXED(val, index) ({ \
+	outb((index), SMSC_INDEX_PORT_ADDR); \
+	outb((val),   SMSC_DATA_PORT_ADDR); })
+
+#define IDE1_PRIMARY_BASE	0x01f0
+#define IDE1_SECONDARY_BASE	0x03f6
+
+unsigned long smsc_superio_virt;
+
+int platform_int_priority[NR_INTC_IRQS] = {
+	IR0, IR1, IR2, IR3, PCA, PCB, PCC, PCD,	/* IRQ  0- 7 */
+	RES, RES, RES, RES, SER, ERR, PW3, PW2,	/* IRQ  8-15 */
+	PW1, PW0, DM0, DM1, DM2, DM3, DAE, RES,	/* IRQ 16-23 */
+	RES, RES, RES, RES, RES, RES, RES, RES,	/* IRQ 24-31 */
+	TU0, TU1, TU2, TI2, ATI, PRI, CUI, ERI,	/* IRQ 32-39 */
+	RXI, BRI, TXI, RES, RES, RES, RES, RES,	/* IRQ 40-47 */
+	RES, RES, RES, RES, RES, RES, RES, RES,	/* IRQ 48-55 */
+	RES, RES, RES, RES, RES, RES, RES, ITI,	/* IRQ 56-63 */
+};
+
+static int __init smsc_superio_setup(void)
+{
+	unsigned char devid, devrev;
+
+	smsc_superio_virt = onchip_remap(SMSC_SUPERIO_BASE, 1024, "SMSC SuperIO");
+	if (!smsc_superio_virt) {
+		panic("Unable to remap SMSC SuperIO\n");
+	}
+
+	/* Initially the chip is in run state */
+	/* Put it into configuration state */
+	outb(SMSC_ENTER_CONFIG_KEY, SMSC_CONFIG_PORT_ADDR);
+	outb(SMSC_ENTER_CONFIG_KEY, SMSC_CONFIG_PORT_ADDR);
+
+	/* Read device ID info */
+	devid = SMSC_SUPERIO_READ_INDEXED(SMSC_DEVICE_ID_INDEX);
+	devrev = SMSC_SUPERIO_READ_INDEXED(SMSC_DEVICE_REV_INDEX);
+	printk("SMSC SuperIO devid %02x rev %02x\n", devid, devrev);
+
+	/* Select the keyboard device */
+	SMSC_SUPERIO_WRITE_INDEXED(SMSC_KEYBOARD_DEVICE, SMCS_LOGICAL_DEV_INDEX);
+
+	/* enable it */
+	SMSC_SUPERIO_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX);
+
+	/* Select the interrupts */
+	/* On a PC keyboard is IRQ1, mouse is IRQ12 */
+	SMSC_SUPERIO_WRITE_INDEXED(1, SMSC_PRIMARY_INT_INDEX);
+	SMSC_SUPERIO_WRITE_INDEXED(12, SMSC_SECONDARY_INT_INDEX);
+
+#ifdef CONFIG_IDE
+	/*
+	 * Only IDE1 exists on the Cayman
+	 */
+
+	/* Power it on */
+	SMSC_SUPERIO_WRITE_INDEXED(1 << SMSC_IDE1_DEVICE, 0x22);
+
+	SMSC_SUPERIO_WRITE_INDEXED(SMSC_IDE1_DEVICE, SMCS_LOGICAL_DEV_INDEX);
+	SMSC_SUPERIO_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX);
+
+	SMSC_SUPERIO_WRITE_INDEXED(IDE1_PRIMARY_BASE >> 8,
+				   SMSC_PRIMARY_BASE_INDEX + 0);
+	SMSC_SUPERIO_WRITE_INDEXED(IDE1_PRIMARY_BASE & 0xff,
+				   SMSC_PRIMARY_BASE_INDEX + 1);
+
+	SMSC_SUPERIO_WRITE_INDEXED(IDE1_SECONDARY_BASE >> 8,
+				   SMSC_SECONDARY_BASE_INDEX + 0);
+	SMSC_SUPERIO_WRITE_INDEXED(IDE1_SECONDARY_BASE & 0xff,
+				   SMSC_SECONDARY_BASE_INDEX + 1);
+
+	SMSC_SUPERIO_WRITE_INDEXED(14, SMSC_PRIMARY_INT_INDEX);
+
+	SMSC_SUPERIO_WRITE_INDEXED(SMSC_CONFIG_REGISTERS,
+				   SMCS_LOGICAL_DEV_INDEX);
+
+	SMSC_SUPERIO_WRITE_INDEXED(0x00, 0xc2); /* GP42 = nIDE1_OE */
+	SMSC_SUPERIO_WRITE_INDEXED(0x01, 0xc5); /* GP45 = IDE1_IRQ */
+	SMSC_SUPERIO_WRITE_INDEXED(0x00, 0xc6); /* GP46 = nIOROP */
+	SMSC_SUPERIO_WRITE_INDEXED(0x00, 0xc7); /* GP47 = nIOWOP */
+#endif
+
+	/* Exit the configuration state */
+	outb(SMSC_EXIT_CONFIG_KEY, SMSC_CONFIG_PORT_ADDR);
+
+	return 0;
+}
+__initcall(smsc_superio_setup);
+
+static void __iomem *cayman_ioport_map(unsigned long port, unsigned int len)
+{
+	if (port < 0x400) {
+		extern unsigned long smsc_superio_virt;
+		return (void __iomem *)((port << 2) | smsc_superio_virt);
+	}
+
+	return (void __iomem *)port;
+}
+
+extern void init_cayman_irq(void);
+
+static struct sh_machine_vector mv_cayman __initmv = {
+	.mv_name		= "Hitachi Cayman",
+	.mv_nr_irqs		= 64,
+	.mv_ioport_map		= cayman_ioport_map,
+	.mv_init_irq		= init_cayman_irq,
+};
diff --git a/arch/sh/boards/dreamcast/irq.c b/arch/sh/boards/dreamcast/irq.c
index 5bf01f86c20..9d0673a9092 100644
--- a/arch/sh/boards/dreamcast/irq.c
+++ b/arch/sh/boards/dreamcast/irq.c
@@ -136,7 +136,7 @@ int systemasic_irq_demux(int irq)
         emr = EMR_BASE + (level << 4) + (level << 2);
         esr = ESR_BASE + (level << 2);
 
-        /* Mask the ESR to filter any spurious, unwanted interrtupts */
+        /* Mask the ESR to filter any spurious, unwanted interrupts */
         status = inl(esr);
         status &= inl(emr);
 
diff --git a/arch/sh/boards/dreamcast/setup.c b/arch/sh/boards/dreamcast/setup.c
index 8799df6e866..2581c8cd5df 100644
--- a/arch/sh/boards/dreamcast/setup.c
+++ b/arch/sh/boards/dreamcast/setup.c
@@ -33,9 +33,6 @@ extern void aica_time_init(void);
 extern int gapspci_init(void);
 extern int systemasic_irq_demux(int);
 
-void *dreamcast_consistent_alloc(struct device *, size_t, dma_addr_t *, gfp_t);
-int dreamcast_consistent_free(struct device *, size_t, void *, dma_addr_t);
-
 static void __init dreamcast_setup(char **cmdline_p)
 {
 	int i;
@@ -64,9 +61,4 @@ static struct sh_machine_vector mv_dreamcast __initmv = {
 	.mv_name		= "Sega Dreamcast",
 	.mv_setup		= dreamcast_setup,
 	.mv_irq_demux		= systemasic_irq_demux,
-
-#ifdef CONFIG_PCI
-	.mv_consistent_alloc	= dreamcast_consistent_alloc,
-	.mv_consistent_free	= dreamcast_consistent_free,
-#endif
 };
diff --git a/arch/sh/boards/landisk/gio.c b/arch/sh/boards/landisk/gio.c
index a37643d002b..17025080db3 100644
--- a/arch/sh/boards/landisk/gio.c
+++ b/arch/sh/boards/landisk/gio.c
@@ -121,7 +121,7 @@ static int gio_ioctl(struct inode *inode, struct file *filp,
 	return 0;
 }
 
-static struct file_operations gio_fops = {
+static const struct file_operations gio_fops = {
 	.owner = THIS_MODULE,
 	.open = gio_open,	/* open */
 	.release = gio_close,	/* release */
diff --git a/arch/sh/boards/renesas/hs7751rvoip/Kconfig b/arch/sh/boards/renesas/hs7751rvoip/Kconfig
deleted file mode 100644
index 1743be477be..00000000000
--- a/arch/sh/boards/renesas/hs7751rvoip/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if SH_HS7751RVOIP
-
-menu "HS7751RVoIP options"
-
-config HS7751RVOIP_CODEC
-	bool "Support VoIP Codec section"
-	help
-	  Selecting this option will support CODEC section.
-
-endmenu
-
-endif
diff --git a/arch/sh/boards/renesas/hs7751rvoip/Makefile b/arch/sh/boards/renesas/hs7751rvoip/Makefile
deleted file mode 100644
index e626377c55e..00000000000
--- a/arch/sh/boards/renesas/hs7751rvoip/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# Makefile for the HS7751RVoIP specific parts of the kernel
-#
-
-obj-y	 := setup.o io.o irq.o
-
-obj-$(CONFIG_PCI) += pci.o
-
diff --git a/arch/sh/boards/renesas/hs7751rvoip/io.c b/arch/sh/boards/renesas/hs7751rvoip/io.c
deleted file mode 100644
index bb9aa0d6285..00000000000
--- a/arch/sh/boards/renesas/hs7751rvoip/io.c
+++ /dev/null
@@ -1,283 +0,0 @@
-/*
- * linux/arch/sh/boards/renesas/hs7751rvoip/io.c
- *
- * Copyright (C) 2001  Ian da Silva, Jeremy Siegel
- * Based largely on io_se.c.
- *
- * I/O routine for Renesas Technology sales HS7751RVoIP
- *
- * Initial version only to support LAN access; some
- * placeholder code from io_hs7751rvoip.c left in with the
- * expectation of later SuperIO and PCMCIA access.
- */
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/module.h>
-#include <linux/pci.h>
-#include <asm/io.h>
-#include <asm/hs7751rvoip.h>
-#include <asm/addrspace.h>
-
-extern void *area6_io8_base;	/* Area 6 8bit I/O Base address */
-extern void *area5_io16_base;	/* Area 5 16bit I/O Base address */
-
-/*
- * The 7751R HS7751RVoIP uses the built-in PCI controller (PCIC)
- * of the 7751R processor, and has a SuperIO accessible via the PCI.
- * The board also includes a PCMCIA controller on its memory bus,
- * like the other Solution Engine boards.
- */
-
-#define CODEC_IO_BASE	0x1000
-#define CODEC_IOMAP(a)	((unsigned long)area6_io8_base + ((a) - CODEC_IO_BASE))
-
-static inline unsigned long port2adr(unsigned int port)
-{
-	if ((0x1f0 <= port && port < 0x1f8) || port == 0x3f6)
-		if (port == 0x3f6)
-			return ((unsigned long)area5_io16_base + 0x0c);
-		else
-			return ((unsigned long)area5_io16_base + 0x800 +
-				((port-0x1f0) << 1));
-	else
-		maybebadio((unsigned long)port);
-	return port;
-}
-
-/* The 7751R HS7751RVoIP seems to have everything hooked */
-/* up pretty normally (nothing on high-bytes only...) so this */
-/* shouldn't be needed */
-static inline int shifted_port(unsigned long port)
-{
-	/* For IDE registers, value is not shifted */
-	if ((0x1f0 <= port && port < 0x1f8) || port == 0x3f6)
-		return 0;
-	else
-		return 1;
-}
-
-#if defined(CONFIG_HS7751RVOIP_CODEC)
-#define codec_port(port)	\
-	((CODEC_IO_BASE <= (port)) && ((port) < (CODEC_IO_BASE + 0x20)))
-#else
-#define codec_port(port)	(0)
-#endif
-
-/*
- * General outline: remap really low stuff [eventually] to SuperIO,
- * stuff in PCI IO space (at or above window at pci.h:PCIBIOS_MIN_IO)
- * is mapped through the PCI IO window.  Stuff with high bits (PXSEG)
- * should be way beyond the window, and is used  w/o translation for
- * compatibility.
- */
-unsigned char hs7751rvoip_inb(unsigned long port)
-{
-	if (PXSEG(port))
-		return ctrl_inb(port);
-	else if (codec_port(port))
-		return ctrl_inb(CODEC_IOMAP(port));
-	else if (is_pci_ioaddr(port) || shifted_port(port))
-		return ctrl_inb(pci_ioaddr(port));
-	else
-		return ctrl_inw(port2adr(port)) & 0xff;
-}
-
-unsigned char hs7751rvoip_inb_p(unsigned long port)
-{
-	unsigned char v;
-
-        if (PXSEG(port))
-		v = ctrl_inb(port);
-	else if (codec_port(port))
-		v = ctrl_inb(CODEC_IOMAP(port));
-	else if (is_pci_ioaddr(port) || shifted_port(port))
-		v = ctrl_inb(pci_ioaddr(port));
-	else
-		v = ctrl_inw(port2adr(port)) & 0xff;
-	ctrl_delay();
-	return v;
-}
-
-unsigned short hs7751rvoip_inw(unsigned long port)
-{
-        if (PXSEG(port))
-		return ctrl_inw(port);
-	else if (is_pci_ioaddr(port) || shifted_port(port))
-		return ctrl_inw(pci_ioaddr(port));
-	else
-		maybebadio(port);
-	return 0;
-}
-
-unsigned int hs7751rvoip_inl(unsigned long port)
-{
-        if (PXSEG(port))
-		return ctrl_inl(port);
-	else if (is_pci_ioaddr(port) || shifted_port(port))
-		return ctrl_inl(pci_ioaddr(port));
-	else
-		maybebadio(port);
-	return 0;
-}
-
-void hs7751rvoip_outb(unsigned char value, unsigned long port)
-{
-
-        if (PXSEG(port))
-		ctrl_outb(value, port);
-	else if (codec_port(port))
-		ctrl_outb(value, CODEC_IOMAP(port));
-	else if (is_pci_ioaddr(port) || shifted_port(port))
-		ctrl_outb(value, pci_ioaddr(port));
-	else
-		ctrl_outb(value, port2adr(port));
-}
-
-void hs7751rvoip_outb_p(unsigned char value, unsigned long port)
-{
-        if (PXSEG(port))
-		ctrl_outb(value, port);
-	else if (codec_port(port))
-		ctrl_outb(value, CODEC_IOMAP(port));
-	else if (is_pci_ioaddr(port) || shifted_port(port))
-		ctrl_outb(value, pci_ioaddr(port));
-	else
-		ctrl_outw(value, port2adr(port));
-
-	ctrl_delay();
-}
-
-void hs7751rvoip_outw(unsigned short value, unsigned long port)
-{
-        if (PXSEG(port))
-		ctrl_outw(value, port);
-	else if (is_pci_ioaddr(port) || shifted_port(port))
-		ctrl_outw(value, pci_ioaddr(port));
-	else
-		maybebadio(port);
-}
-
-void hs7751rvoip_outl(unsigned int value, unsigned long port)
-{
-        if (PXSEG(port))
-		ctrl_outl(value, port);
-	else if (is_pci_ioaddr(port) || shifted_port(port))
-		ctrl_outl(value, pci_ioaddr(port));
-	else
-		maybebadio(port);
-}
-
-void hs7751rvoip_insb(unsigned long port, void *addr, unsigned long count)
-{
-	u8 *buf = addr;
-
-	if (PXSEG(port))
-		while (count--)
-			*buf++ = ctrl_inb(port);
-	else if (codec_port(port))
-		while (count--)
-			*buf++ = ctrl_inb(CODEC_IOMAP(port));
-	else if (is_pci_ioaddr(port) || shifted_port(port)) {
-		volatile u8 *bp = (volatile u8 *)pci_ioaddr(port);
-
-		while (count--)
-			*buf++ = *bp;
-	} else {
-		volatile u16 *p = (volatile u16 *)port2adr(port);
-
-		while (count--)
-			*buf++ = *p & 0xff;
-	}
-}
-
-void hs7751rvoip_insw(unsigned long port, void *addr, unsigned long count)
-{
-	volatile u16 *p;
-	u16 *buf = addr;
-
-	if (PXSEG(port))
-		p = (volatile u16 *)port;
-	else if (is_pci_ioaddr(port) || shifted_port(port))
-		p = (volatile u16 *)pci_ioaddr(port);
-	else
-		p = (volatile u16 *)port2adr(port);
-	while (count--)
-		*buf++ = *p;
-}
-
-void hs7751rvoip_insl(unsigned long port, void *addr, unsigned long count)
-{
-
-	if (is_pci_ioaddr(port) || shifted_port(port)) {
-		volatile u32 *p = (volatile u32 *)pci_ioaddr(port);
-		u32 *buf = addr;
-
-		while (count--)
-			*buf++ = *p;
-	} else
-		maybebadio(port);
-}
-
-void hs7751rvoip_outsb(unsigned long port, const void *addr, unsigned long count)
-{
-	const u8 *buf = addr;
-
-	if (PXSEG(port))
-		while (count--)
-			ctrl_outb(*buf++, port);
-	else if (codec_port(port))
-		while (count--)
-			ctrl_outb(*buf++, CODEC_IOMAP(port));
-	else if (is_pci_ioaddr(port) || shifted_port(port)) {
-		volatile u8 *bp = (volatile u8 *)pci_ioaddr(port);
-
-		while (count--)
-			*bp = *buf++;
-	} else {
-		volatile u16 *p = (volatile u16 *)port2adr(port);
-
-		while (count--)
-			*p = *buf++;
-	}
-}
-
-void hs7751rvoip_outsw(unsigned long port, const void *addr, unsigned long count)
-{
-	volatile u16 *p;
-	const u16 *buf = addr;
-
-	if (PXSEG(port))
-		p = (volatile u16 *)port;
-	else if (is_pci_ioaddr(port) || shifted_port(port))
-		p = (volatile u16 *)pci_ioaddr(port);
-	else
-		p = (volatile u16 *)port2adr(port);
-
-	while (count--)
-		*p = *buf++;
-}
-
-void hs7751rvoip_outsl(unsigned long port, const void *addr, unsigned long count)
-{
-	const u32 *buf = addr;
-
-	if (is_pci_ioaddr(port) || shifted_port(port)) {
-		volatile u32 *p = (volatile u32 *)pci_ioaddr(port);
-
-		while (count--)
-			*p = *buf++;
-	} else
-		maybebadio(port);
-}
-
-void __iomem *hs7751rvoip_ioport_map(unsigned long port, unsigned int size)
-{
-        if (PXSEG(port))
-                return (void __iomem *)port;
-	else if (unlikely(codec_port(port) && (size == 1)))
-		return (void __iomem *)CODEC_IOMAP(port);
-        else if (is_pci_ioaddr(port))
-                return (void __iomem *)pci_ioaddr(port);
-
-        return (void __iomem *)port2adr(port);
-}
diff --git a/arch/sh/boards/renesas/hs7751rvoip/irq.c b/arch/sh/boards/renesas/hs7751rvoip/irq.c
deleted file mode 100644
index e55c6686b21..00000000000
--- a/arch/sh/boards/renesas/hs7751rvoip/irq.c
+++ /dev/null
@@ -1,116 +0,0 @@
-/*
- * linux/arch/sh/boards/renesas/hs7751rvoip/irq.c
- *
- * Copyright (C) 2000  Kazumoto Kojima
- *
- * Renesas Technology Sales HS7751RVoIP Support.
- *
- * Modified for HS7751RVoIP by
- * Atom Create Engineering Co., Ltd. 2002.
- * Lineo uSolutions, Inc. 2003.
- */
-
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/hs7751rvoip.h>
-
-static int mask_pos[] = {8, 9, 10, 11, 12, 13, 0, 1, 2, 3, 4, 5, 6, 7};
-
-static void enable_hs7751rvoip_irq(unsigned int irq);
-static void disable_hs7751rvoip_irq(unsigned int irq);
-
-/* shutdown is same as "disable" */
-#define shutdown_hs7751rvoip_irq disable_hs7751rvoip_irq
-
-static void ack_hs7751rvoip_irq(unsigned int irq);
-static void end_hs7751rvoip_irq(unsigned int irq);
-
-static unsigned int startup_hs7751rvoip_irq(unsigned int irq)
-{
-	enable_hs7751rvoip_irq(irq);
-	return 0; /* never anything pending */
-}
-
-static void disable_hs7751rvoip_irq(unsigned int irq)
-{
-	unsigned short val;
-	unsigned short mask = 0xffff ^ (0x0001 << mask_pos[irq]);
-
-	/* Set the priority in IPR to 0 */
-	val = ctrl_inw(IRLCNTR3);
-	val &= mask;
-	ctrl_outw(val, IRLCNTR3);
-}
-
-static void enable_hs7751rvoip_irq(unsigned int irq)
-{
-	unsigned short val;
-	unsigned short value = (0x0001 << mask_pos[irq]);
-
-	/* Set priority in IPR back to original value */
-	val = ctrl_inw(IRLCNTR3);
-	val |= value;
-	ctrl_outw(val, IRLCNTR3);
-}
-
-static void ack_hs7751rvoip_irq(unsigned int irq)
-{
-	disable_hs7751rvoip_irq(irq);
-}
-
-static void end_hs7751rvoip_irq(unsigned int irq)
-{
-	if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
-		enable_hs7751rvoip_irq(irq);
-}
-
-static struct hw_interrupt_type hs7751rvoip_irq_type = {
-	.typename =  "HS7751RVoIP IRQ",
-	.startup = startup_hs7751rvoip_irq,
-	.shutdown = shutdown_hs7751rvoip_irq,
-	.enable = enable_hs7751rvoip_irq,
-	.disable = disable_hs7751rvoip_irq,
-	.ack = ack_hs7751rvoip_irq,
-	.end = end_hs7751rvoip_irq,
-};
-
-static void make_hs7751rvoip_irq(unsigned int irq)
-{
-	disable_irq_nosync(irq);
-	irq_desc[irq].chip = &hs7751rvoip_irq_type;
-	disable_hs7751rvoip_irq(irq);
-}
-
-/*
- * Initialize IRQ setting
- */
-void __init init_hs7751rvoip_IRQ(void)
-{
-	int i;
-
-	/* IRL0=ON HOOK1
-	 * IRL1=OFF HOOK1
-	 * IRL2=ON HOOK2
-	 * IRL3=OFF HOOK2
-	 * IRL4=Ringing Detection
-	 * IRL5=CODEC
-	 * IRL6=Ethernet
-	 * IRL7=Ethernet Hub
-	 * IRL8=USB Communication
-	 * IRL9=USB Connection
-	 * IRL10=USB DMA
-	 * IRL11=CF Card
-	 * IRL12=PCMCIA
-	 * IRL13=PCI Slot
-	 */
-	ctrl_outw(0x9876, IRLCNTR1);
-	ctrl_outw(0xdcba, IRLCNTR2);
-	ctrl_outw(0x0050, IRLCNTR4);
-	ctrl_outw(0x4321, IRLCNTR5);
-
-	for (i=0; i<14; i++)
-		make_hs7751rvoip_irq(i);
-}
diff --git a/arch/sh/boards/renesas/hs7751rvoip/pci.c b/arch/sh/boards/renesas/hs7751rvoip/pci.c
deleted file mode 100644
index 1c0ddee30d2..00000000000
--- a/arch/sh/boards/renesas/hs7751rvoip/pci.c
+++ /dev/null
@@ -1,149 +0,0 @@
-/*
- * linux/arch/sh/boards/renesas/hs7751rvoip/pci.c
- *
- * Author:  Ian DaSilva (idasilva@mvista.com)
- *
- * Highly leveraged from pci-bigsur.c, written by Dustin McIntire.
- *
- * May be copied or modified under the terms of the GNU General Public
- * License.  See linux/COPYING for more information.
- *
- * PCI initialization for the Renesas SH7751R HS7751RVoIP board
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/pci.h>
-#include <linux/module.h>
-
-#include <asm/io.h>
-#include "../../../drivers/pci/pci-sh7751.h"
-#include <asm/hs7751rvoip/hs7751rvoip.h>
-
-#define PCIMCR_MRSET_OFF	0xBFFFFFFF
-#define PCIMCR_RFSH_OFF		0xFFFFFFFB
-
-/*
- * Only long word accesses of the PCIC's internal local registers and the
- * configuration registers from the CPU is supported.
- */
-#define PCIC_WRITE(x,v) writel((v), PCI_REG(x))
-#define PCIC_READ(x) readl(PCI_REG(x))
-
-/*
- * Description:  This function sets up and initializes the pcic, sets
- * up the BARS, maps the DRAM into the address space etc, etc.
- */
-int __init pcibios_init_platform(void)
-{
-	unsigned long bcr1, wcr1, wcr2, wcr3, mcr;
-	unsigned short bcr2, bcr3;
-
-	/*
-	 * Initialize the slave bus controller on the pcic.  The values used
-	 * here should not be hardcoded, but they should be taken from the bsc
-	 * on the processor, to make this function as generic as possible.
-	 * (i.e. Another sbc may usr different SDRAM timing settings -- in order
-	 * for the pcic to work, its settings need to be exactly the same.)
-	 */
-	bcr1 = (*(volatile unsigned long *)(SH7751_BCR1));
-	bcr2 = (*(volatile unsigned short *)(SH7751_BCR2));
-	bcr3 = (*(volatile unsigned short *)(SH7751_BCR3));
-	wcr1 = (*(volatile unsigned long *)(SH7751_WCR1));
-	wcr2 = (*(volatile unsigned long *)(SH7751_WCR2));
-	wcr3 = (*(volatile unsigned long *)(SH7751_WCR3));
-	mcr = (*(volatile unsigned long *)(SH7751_MCR));
-
-	bcr1 = bcr1 | 0x00080000;  /* Enable Bit 19, BREQEN */
-	(*(volatile unsigned long *)(SH7751_BCR1)) = bcr1;
-
-	bcr1 = bcr1 | 0x40080000;  /* Enable Bit 19 BREQEN, set PCIC to slave */
-	PCIC_WRITE(SH7751_PCIBCR1, bcr1);	/* PCIC BCR1 */
-	PCIC_WRITE(SH7751_PCIBCR2, bcr2);	/* PCIC BCR2 */
-	PCIC_WRITE(SH7751_PCIBCR3, bcr3);	/* PCIC BCR3 */
-	PCIC_WRITE(SH7751_PCIWCR1, wcr1);	/* PCIC WCR1 */
-	PCIC_WRITE(SH7751_PCIWCR2, wcr2);	/* PCIC WCR2 */
-	PCIC_WRITE(SH7751_PCIWCR3, wcr3);	/* PCIC WCR3 */
-	mcr = (mcr & PCIMCR_MRSET_OFF) & PCIMCR_RFSH_OFF;
-	PCIC_WRITE(SH7751_PCIMCR, mcr);		/* PCIC MCR */
-
-	/* Enable all interrupts, so we know what to fix */
-	PCIC_WRITE(SH7751_PCIINTM, 0x0000c3ff);
-	PCIC_WRITE(SH7751_PCIAINTM, 0x0000380f);
-
-	/* Set up standard PCI config registers */
-	PCIC_WRITE(SH7751_PCICONF1, 0xFB900047); /* Bus Master, Mem & I/O access */
-	PCIC_WRITE(SH7751_PCICONF2, 0x00000000); /* PCI Class code & Revision ID */
-	PCIC_WRITE(SH7751_PCICONF4, 0xab000001); /* PCI I/O address (local regs) */
-	PCIC_WRITE(SH7751_PCICONF5, 0x0c000000); /* PCI MEM address (local RAM)  */
-	PCIC_WRITE(SH7751_PCICONF6, 0xd0000000); /* PCI MEM address (unused) */
-	PCIC_WRITE(SH7751_PCICONF11, 0x35051054); /* PCI Subsystem ID & Vendor ID */
-	PCIC_WRITE(SH7751_PCILSR0, 0x03f00000);	/* MEM (full 64M exposed) */
-	PCIC_WRITE(SH7751_PCILSR1, 0x00000000); /* MEM (unused) */
-	PCIC_WRITE(SH7751_PCILAR0, 0x0c000000); /* MEM (direct map from PCI) */
-	PCIC_WRITE(SH7751_PCILAR1, 0x00000000); /* MEM (unused) */
-
-	/* Now turn it on... */
-	PCIC_WRITE(SH7751_PCICR, 0xa5000001);
-
-	/*
-	 * Set PCIMBR and PCIIOBR here, assuming a single window
-	 * (16M MEM, 256K IO) is enough.  If a larger space is
-	 * needed, the readx/writex and inx/outx functions will
-	 * have to do more (e.g. setting registers for each call).
-	 */
-
-	/*
-	 * Set the MBR so PCI address is one-to-one with window,
-	 * meaning all calls go straight through... use ifdef to
-	 * catch erroneous assumption.
-	 */
-	BUG_ON(PCIBIOS_MIN_MEM != SH7751_PCI_MEMORY_BASE);
-
-	PCIC_WRITE(SH7751_PCIMBR, PCIBIOS_MIN_MEM);
-
-	/* Set IOBR for window containing area specified in pci.h */
-	PCIC_WRITE(SH7751_PCIIOBR, (PCIBIOS_MIN_IO & SH7751_PCIIOBR_MASK));
-
-	/* All done, may as well say so... */
-	printk("SH7751R PCI: Finished initialization of the PCI controller\n");
-
-	return 1;
-}
-
-int __init pcibios_map_platform_irq(u8 slot, u8 pin)
-{
-        switch (slot) {
-	case 0: return IRQ_PCISLOT;	/* PCI Extend slot */
-	case 1: return IRQ_PCMCIA;	/* PCI Cardbus Bridge */
-	case 2: return IRQ_PCIETH;	/* Realtek Ethernet controller */
-	case 3: return IRQ_PCIHUB;	/* Realtek Ethernet Hub controller */
-	default:
-		printk("PCI: Bad IRQ mapping request for slot %d\n", slot);
-		return -1;
-	}
-}
-
-static struct resource sh7751_io_resource = {
-	.name	= "SH7751_IO",
-	.start	= 0x4000,
-	.end	= 0x4000 + SH7751_PCI_IO_SIZE - 1,
-	.flags	= IORESOURCE_IO
-};
-
-static struct resource sh7751_mem_resource = {
-	.name	= "SH7751_mem",
-	.start	= SH7751_PCI_MEMORY_BASE,
-	.end	= SH7751_PCI_MEMORY_BASE + SH7751_PCI_MEM_SIZE - 1,
-	.flags	= IORESOURCE_MEM
-};
-
-extern struct pci_ops sh7751_pci_ops;
-
-struct pci_channel board_pci_channels[] = {
-	{ &sh7751_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0xff },
-	{ NULL, NULL, NULL, 0, 0 },
-};
-EXPORT_SYMBOL(board_pci_channels);
diff --git a/arch/sh/boards/renesas/hs7751rvoip/setup.c b/arch/sh/boards/renesas/hs7751rvoip/setup.c
deleted file mode 100644
index c05625975f2..00000000000
--- a/arch/sh/boards/renesas/hs7751rvoip/setup.c
+++ /dev/null
@@ -1,105 +0,0 @@
-/*
- * Renesas Technology Sales HS7751RVoIP Support.
- *
- * Copyright (C) 2000  Kazumoto Kojima
- *
- * Modified for HS7751RVoIP by
- * Atom Create Engineering Co., Ltd. 2002.
- * Lineo uSolutions, Inc. 2003.
- */
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/mm.h>
-#include <linux/pm.h>
-#include <asm/hs7751rvoip.h>
-#include <asm/io.h>
-#include <asm/machvec.h>
-
-static void hs7751rvoip_power_off(void)
-{
-	ctrl_outw(ctrl_inw(PA_OUTPORTR) & 0xffdf, PA_OUTPORTR);
-}
-
-void *area5_io8_base;
-void *area6_io8_base;
-void *area5_io16_base;
-void *area6_io16_base;
-
-static int __init hs7751rvoip_cf_init(void)
-{
-	pgprot_t prot;
-	unsigned long paddrbase;
-
-	/* open I/O area window */
-	paddrbase = virt_to_phys((void *)(PA_AREA5_IO+0x00000800));
-	prot = PAGE_KERNEL_PCC(1, _PAGE_PCC_COM16);
-	area5_io16_base = p3_ioremap(paddrbase, PAGE_SIZE, prot.pgprot);
-	if (!area5_io16_base) {
-		printk("allocate_cf_area : can't open CF I/O window!\n");
-		return -ENOMEM;
-	}
-
-	/* XXX : do we need attribute and common-memory area also? */
-
-	paddrbase = virt_to_phys((void *)PA_AREA6_IO);
-#if defined(CONFIG_HS7751RVOIP_CODEC)
-	prot = PAGE_KERNEL_PCC(0, _PAGE_PCC_COM8);
-#else
-	prot = PAGE_KERNEL_PCC(0, _PAGE_PCC_IO8);
-#endif
-	area6_io8_base = p3_ioremap(paddrbase, PAGE_SIZE, prot.pgprot);
-	if (!area6_io8_base) {
-		printk("allocate_cf_area : can't open CODEC I/O 8bit window!\n");
-		return -ENOMEM;
-	}
-	prot = PAGE_KERNEL_PCC(0, _PAGE_PCC_IO16);
-	area6_io16_base = p3_ioremap(paddrbase, PAGE_SIZE, prot.pgprot);
-	if (!area6_io16_base) {
-		printk("allocate_cf_area : can't open CODEC I/O 16bit window!\n");
-		return -ENOMEM;
-	}
-
-	return 0;
-}
-device_initcall(hs7751rvoip_cf_init);
-
-/*
- * Initialize the board
- */
-static void __init hs7751rvoip_setup(char **cmdline_p)
-{
-	ctrl_outb(0xf0, PA_OUTPORTR);
-	pm_power_off = hs7751rvoip_power_off;
-
-	printk(KERN_INFO "Renesas Technology Sales HS7751RVoIP-2 support.\n");
-}
-
-static struct sh_machine_vector mv_hs7751rvoip __initmv = {
-	.mv_name		= "HS7751RVoIP",
-	.mv_setup		= hs7751rvoip_setup,
-	.mv_nr_irqs		= 72,
-
-	.mv_inb			= hs7751rvoip_inb,
-	.mv_inw			= hs7751rvoip_inw,
-	.mv_inl			= hs7751rvoip_inl,
-	.mv_outb		= hs7751rvoip_outb,
-	.mv_outw		= hs7751rvoip_outw,
-	.mv_outl		= hs7751rvoip_outl,
-
-	.mv_inb_p		= hs7751rvoip_inb_p,
-	.mv_inw_p		= hs7751rvoip_inw,
-	.mv_inl_p		= hs7751rvoip_inl,
-	.mv_outb_p		= hs7751rvoip_outb_p,
-	.mv_outw_p		= hs7751rvoip_outw,
-	.mv_outl_p		= hs7751rvoip_outl,
-
-	.mv_insb		= hs7751rvoip_insb,
-	.mv_insw		= hs7751rvoip_insw,
-	.mv_insl		= hs7751rvoip_insl,
-	.mv_outsb		= hs7751rvoip_outsb,
-	.mv_outsw		= hs7751rvoip_outsw,
-	.mv_outsl		= hs7751rvoip_outsl,
-
-	.mv_init_irq		= init_hs7751rvoip_IRQ,
-	.mv_ioport_map		= hs7751rvoip_ioport_map,
-};
diff --git a/arch/sh/boards/renesas/r7780rp/Makefile b/arch/sh/boards/renesas/r7780rp/Makefile
index dd26182fbf5..20a10080b11 100644
--- a/arch/sh/boards/renesas/r7780rp/Makefile
+++ b/arch/sh/boards/renesas/r7780rp/Makefile
@@ -3,7 +3,7 @@
 #
 irqinit-$(CONFIG_SH_R7780MP)	:= irq-r7780mp.o
 irqinit-$(CONFIG_SH_R7785RP)	:= irq-r7785rp.o
-irqinit-$(CONFIG_SH_R7780RP)	:= irq-r7780rp.o irq.o
+irqinit-$(CONFIG_SH_R7780RP)	:= irq-r7780rp.o
 obj-y				:= setup.o $(irqinit-y)
 
 ifneq ($(CONFIG_SH_R7785RP),y)
diff --git a/arch/sh/boards/renesas/r7780rp/irq-r7780mp.c b/arch/sh/boards/renesas/r7780rp/irq-r7780mp.c
index 59b47fe061f..1f8f073f27b 100644
--- a/arch/sh/boards/renesas/r7780rp/irq-r7780mp.c
+++ b/arch/sh/boards/renesas/r7780rp/irq-r7780mp.c
@@ -47,7 +47,7 @@ static unsigned char irl2irq[HL_NR_IRL] __initdata = {
 };
 
 static DECLARE_INTC_DESC(intc_desc, "r7780mp", vectors,
-			 NULL, NULL, mask_registers, NULL, NULL);
+			 NULL, mask_registers, NULL, NULL);
 
 unsigned char * __init highlander_init_irq_r7780mp(void)
 {
diff --git a/arch/sh/boards/renesas/r7780rp/irq-r7780rp.c b/arch/sh/boards/renesas/r7780rp/irq-r7780rp.c
index fa4a534cade..bd34048ed0e 100644
--- a/arch/sh/boards/renesas/r7780rp/irq-r7780rp.c
+++ b/arch/sh/boards/renesas/r7780rp/irq-r7780rp.c
@@ -3,21 +3,65 @@
  *
  * Copyright (C) 2002  Atom Create Engineering Co., Ltd.
  * Copyright (C) 2006  Paul Mundt
+ * Copyright (C) 2008  Magnus Damm
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  */
 #include <linux/init.h>
+#include <linux/irq.h>
 #include <linux/io.h>
 #include <asm/r7780rp.h>
 
+enum {
+	UNUSED = 0,
+
+	/* board specific interrupt sources */
+
+	AX88796,          /* Ethernet controller */
+	PSW,              /* Push Switch */
+	CF,               /* Compact Flash */
+
+	PCI_A,
+	PCI_B,
+	PCI_C,
+	PCI_D,
+};
+
+static struct intc_vect vectors[] __initdata = {
+	INTC_IRQ(PCI_A, 65), /* dirty: overwrite cpu vectors for pci */
+	INTC_IRQ(PCI_B, 66),
+	INTC_IRQ(PCI_C, 67),
+	INTC_IRQ(PCI_D, 68),
+	INTC_IRQ(CF, IRQ_CF),
+	INTC_IRQ(PSW, IRQ_PSW),
+	INTC_IRQ(AX88796, IRQ_AX88796),
+};
+
+static struct intc_mask_reg mask_registers[] __initdata = {
+	{ 0xa5000000, 0, 16, /* IRLMSK */
+	  { PCI_A, PCI_B, PCI_C, PCI_D, CF, 0, 0, 0,
+	    0, 0, 0, 0, 0, 0, PSW, AX88796 } },
+};
+
+static unsigned char irl2irq[HL_NR_IRL] __initdata = {
+	65, 66, 67, 68,
+	IRQ_CF, 0, 0, 0,
+	0, 0, 0, 0,
+	IRQ_AX88796, IRQ_PSW
+};
+
+static DECLARE_INTC_DESC(intc_desc, "r7780rp", vectors,
+			 NULL, mask_registers, NULL, NULL);
+
 unsigned char * __init highlander_init_irq_r7780rp(void)
 {
-	int i;
-
-	for (i = 0; i < 15; i++)
-		make_r7780rp_irq(i);
+	if (ctrl_inw(0xa5000600)) {
+		printk(KERN_INFO "Using r7780rp interrupt controller.\n");
+		register_intc_controller(&intc_desc);
+		return irl2irq;
+	}
 
 	return NULL;
 }
diff --git a/arch/sh/boards/renesas/r7780rp/irq-r7785rp.c b/arch/sh/boards/renesas/r7780rp/irq-r7785rp.c
index b2c6a84673b..bf7ec107fbc 100644
--- a/arch/sh/boards/renesas/r7780rp/irq-r7785rp.c
+++ b/arch/sh/boards/renesas/r7780rp/irq-r7785rp.c
@@ -2,7 +2,7 @@
  * Renesas Solutions Highlander R7785RP Support.
  *
  * Copyright (C) 2002  Atom Create Engineering Co., Ltd.
- * Copyright (C) 2006  Paul Mundt
+ * Copyright (C) 2006 - 2008  Paul Mundt
  * Copyright (C) 2007  Magnus Damm
  *
  * This file is subject to the terms and conditions of the GNU General Public
@@ -17,31 +17,52 @@
 enum {
 	UNUSED = 0,
 
-	/* board specific interrupt sources */
-	AX88796,          /* Ethernet controller */
-	CF,               /* Compact Flash */
+	/* FPGA specific interrupt sources */
+	CF,		/* Compact Flash */
+	SMBUS,		/* SMBUS */
+	TP,		/* Touch panel */
+	RTC,		/* RTC Alarm */
+	TH_ALERT,	/* Temperature sensor */
+	AX88796,	/* Ethernet controller */
+
+	/* external bus connector */
+	EXT0, EXT1, EXT2, EXT3, EXT4, EXT5, EXT6, EXT7,
 };
 
 static struct intc_vect vectors[] __initdata = {
 	INTC_IRQ(CF, IRQ_CF),
+	INTC_IRQ(SMBUS, IRQ_SMBUS),
+	INTC_IRQ(TP, IRQ_TP),
+	INTC_IRQ(RTC, IRQ_RTC),
+	INTC_IRQ(TH_ALERT, IRQ_TH_ALERT),
+
+	INTC_IRQ(EXT0, IRQ_EXT0), INTC_IRQ(EXT1, IRQ_EXT1),
+	INTC_IRQ(EXT2, IRQ_EXT2), INTC_IRQ(EXT3, IRQ_EXT3),
+
+	INTC_IRQ(EXT4, IRQ_EXT4), INTC_IRQ(EXT5, IRQ_EXT5),
+	INTC_IRQ(EXT6, IRQ_EXT6), INTC_IRQ(EXT7, IRQ_EXT7),
+
 	INTC_IRQ(AX88796, IRQ_AX88796),
 };
 
 static struct intc_mask_reg mask_registers[] __initdata = {
 	{ 0xa4000010, 0, 16, /* IRLMCR1 */
-	  { 0, 0, 0, 0, CF, AX88796, 0, 0,
-	    0, 0, 0, 0, 0, 0, 0, 0 } },
+	  { 0, 0, 0, 0, CF, AX88796, SMBUS, TP,
+	    RTC, 0, TH_ALERT, 0, 0, 0, 0, 0 } },
+	{ 0xa4000012, 0, 16, /* IRLMCR2 */
+	  { 0, 0, 0, 0, 0, 0, 0, 0,
+	    EXT7, EXT6, EXT5, EXT4, EXT3, EXT2, EXT1, EXT0 } },
 };
 
 static unsigned char irl2irq[HL_NR_IRL] __initdata = {
-	0, IRQ_CF, 0, 0,
-	0, 0, 0, 0,
-	0, 0, IRQ_AX88796, 0,
-	0, 0, 0,
+	0, IRQ_CF, IRQ_EXT4, IRQ_EXT5,
+	IRQ_EXT6, IRQ_EXT7, IRQ_SMBUS, IRQ_TP,
+	IRQ_RTC, IRQ_TH_ALERT, IRQ_AX88796, IRQ_EXT0,
+	IRQ_EXT1, IRQ_EXT2, IRQ_EXT3,
 };
 
 static DECLARE_INTC_DESC(intc_desc, "r7785rp", vectors,
-			 NULL, NULL, mask_registers, NULL, NULL);
+			 NULL, mask_registers, NULL, NULL);
 
 unsigned char * __init highlander_init_irq_r7785rp(void)
 {
@@ -58,7 +79,7 @@ unsigned char * __init highlander_init_irq_r7785rp(void)
 	ctrl_outw(0x7060, PA_IRLPRC);	/* FPGA IRLC */
 	ctrl_outw(0x0000, PA_IRLPRD);	/* FPGA IRLD */
 	ctrl_outw(0x4321, PA_IRLPRE);	/* FPGA IRLE */
-	ctrl_outw(0x0000, PA_IRLPRF);	/* FPGA IRLF */
+	ctrl_outw(0xdcba, PA_IRLPRF);	/* FPGA IRLF */
 
 	register_intc_controller(&intc_desc);
 	return irl2irq;
diff --git a/arch/sh/boards/renesas/r7780rp/irq.c b/arch/sh/boards/renesas/r7780rp/irq.c
deleted file mode 100644
index e0b8eb52f37..00000000000
--- a/arch/sh/boards/renesas/r7780rp/irq.c
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- * Renesas Solutions Highlander R7780RP-1 Support.
- *
- * Copyright (C) 2002  Atom Create Engineering Co., Ltd.
- * Copyright (C) 2006  Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <asm/r7780rp.h>
-
-#ifdef CONFIG_SH_R7780RP
-static int mask_pos[] = {15, 14, 13, 12, 11, 10, 9, 8, 7, 5, 6, 4, 0, 1, 2, 0};
-#elif defined(CONFIG_SH_R7780MP)
-static int mask_pos[] = {12, 11, 9, 14, 15, 8, 13, 6, 5, 4, 3, 2, 0, 0, 1, 0};
-#elif defined(CONFIG_SH_R7785RP)
-static int mask_pos[] = {2, 11, 2, 2, 2, 2, 9, 8, 7, 5, 10, 2, 2, 2, 2, 2};
-#endif
-
-static void enable_r7780rp_irq(unsigned int irq)
-{
-	/* Set priority in IPR back to original value */
-	ctrl_outw(ctrl_inw(IRLCNTR1) | (1 << mask_pos[irq]), IRLCNTR1);
-}
-
-static void disable_r7780rp_irq(unsigned int irq)
-{
-	/* Set the priority in IPR to 0 */
-	ctrl_outw(ctrl_inw(IRLCNTR1) & (0xffff ^ (1 << mask_pos[irq])),
-		  IRLCNTR1);
-}
-
-static struct irq_chip r7780rp_irq_chip __read_mostly = {
-	.name		= "R7780RP",
-	.mask		= disable_r7780rp_irq,
-	.unmask		= enable_r7780rp_irq,
-	.mask_ack	= disable_r7780rp_irq,
-};
-
-void make_r7780rp_irq(unsigned int irq)
-{
-	disable_irq_nosync(irq);
-	set_irq_chip_and_handler_name(irq, &r7780rp_irq_chip,
-				      handle_level_irq, "level");
-	enable_r7780rp_irq(irq);
-}
diff --git a/arch/sh/boards/renesas/r7780rp/setup.c b/arch/sh/boards/renesas/r7780rp/setup.c
index 0fdc0bc1914..a43b47726f5 100644
--- a/arch/sh/boards/renesas/r7780rp/setup.c
+++ b/arch/sh/boards/renesas/r7780rp/setup.c
@@ -179,9 +179,11 @@ static struct platform_device ax88796_device = {
 static struct platform_device *r7780rp_devices[] __initdata = {
 	&r8a66597_usb_host_device,
 	&m66592_usb_peripheral_device,
-	&cf_ide_device,
 	&heartbeat_device,
+#ifndef CONFIG_SH_R7780RP
+	&cf_ide_device,
 	&ax88796_device,
+#endif
 };
 
 static int __init r7780rp_devices_setup(void)
@@ -316,9 +318,9 @@ void __init highlander_init_irq(void)
 			break;
 #endif
 #ifdef CONFIG_SH_R7780RP
-		highlander_init_irq_r7780rp();
-		ucp = irl2irq;
-		break;
+		ucp = highlander_init_irq_r7780rp();
+		if (ucp)
+			break;
 #endif
 	} while (0);
 
diff --git a/arch/sh/boards/renesas/rts7751r2d/irq.c b/arch/sh/boards/renesas/rts7751r2d/irq.c
index 7cc2813adfe..8e49f6e5124 100644
--- a/arch/sh/boards/renesas/rts7751r2d/irq.c
+++ b/arch/sh/boards/renesas/rts7751r2d/irq.c
@@ -13,7 +13,6 @@
 #include <linux/irq.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
-#include <asm/voyagergx.h>
 #include <asm/rts7751r2d.h>
 
 #define R2D_NR_IRL 13
@@ -71,7 +70,7 @@ static unsigned char irl2irq_r2d_1[R2D_NR_IRL] __initdata = {
 };
 
 static DECLARE_INTC_DESC(intc_desc_r2d_1, "r2d-1", vectors_r2d_1,
-			 NULL, NULL, mask_registers_r2d_1, NULL, NULL);
+			 NULL, mask_registers_r2d_1, NULL, NULL);
 
 #endif /* CONFIG_RTS7751R2D_1 */
 
@@ -109,7 +108,7 @@ static unsigned char irl2irq_r2d_plus[R2D_NR_IRL] __initdata = {
 };
 
 static DECLARE_INTC_DESC(intc_desc_r2d_plus, "r2d-plus", vectors_r2d_plus,
-			 NULL, NULL, mask_registers_r2d_plus, NULL, NULL);
+			 NULL, mask_registers_r2d_plus, NULL, NULL);
 
 #endif /* CONFIG_RTS7751R2D_PLUS */
 
@@ -153,7 +152,4 @@ void __init init_rts7751r2d_IRQ(void)
 	}
 
 	register_intc_controller(d);
-#ifdef CONFIG_MFD_SM501
-	setup_voyagergx_irq();
-#endif
 }
diff --git a/arch/sh/boards/renesas/rts7751r2d/setup.c b/arch/sh/boards/renesas/rts7751r2d/setup.c
index 8125d20fdbd..3452b072add 100644
--- a/arch/sh/boards/renesas/rts7751r2d/setup.c
+++ b/arch/sh/boards/renesas/rts7751r2d/setup.c
@@ -13,34 +13,15 @@
 #include <linux/pata_platform.h>
 #include <linux/serial_8250.h>
 #include <linux/sm501.h>
+#include <linux/sm501-regs.h>
 #include <linux/pm.h>
+#include <linux/fb.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/spi_bitbang.h>
 #include <asm/machvec.h>
 #include <asm/rts7751r2d.h>
-#include <asm/voyagergx.h>
 #include <asm/io.h>
-
-static void __init voyagergx_serial_init(void)
-{
-	unsigned long val;
-
-	/*
-	 * GPIO Control
-	 */
-	val = readl((void __iomem *)GPIO_MUX_HIGH);
-	val |= 0x00001fe0;
-	writel(val, (void __iomem *)GPIO_MUX_HIGH);
-
-	/*
-	 * Power Mode Gate
-	 */
-	val = readl((void __iomem *)POWER_MODE0_GATE);
-	val |= (POWER_MODE0_GATE_U0 | POWER_MODE0_GATE_U1);
-	writel(val, (void __iomem *)POWER_MODE0_GATE);
-
-	val = readl((void __iomem *)POWER_MODE1_GATE);
-	val |= (POWER_MODE1_GATE_U0 | POWER_MODE1_GATE_U1);
-	writel(val, (void __iomem *)POWER_MODE1_GATE);
-}
+#include <asm/spi.h>
 
 static struct resource cf_ide_resources[] = {
 	[0] = {
@@ -75,6 +56,43 @@ static struct platform_device cf_ide_device  = {
 	},
 };
 
+static struct spi_board_info spi_bus[] = {
+	{
+		.modalias	= "rtc-r9701",
+		.max_speed_hz	= 1000000,
+		.mode		= SPI_MODE_3,
+	},
+};
+
+static void r2d_chip_select(struct sh_spi_info *spi, int cs, int state)
+{
+	BUG_ON(cs != 0);  /* Single Epson RTC-9701JE attached on CS0 */
+	ctrl_outw(state == BITBANG_CS_ACTIVE, PA_RTCCE);
+}
+
+static struct sh_spi_info spi_info = {
+	.num_chipselect = 1,
+	.chip_select = r2d_chip_select,
+};
+
+static struct resource spi_sh_sci_resources[] = {
+	{
+		.start	= 0xffe00000,
+		.end	= 0xffe0001f,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device spi_sh_sci_device  = {
+	.name		= "spi_sh_sci",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(spi_sh_sci_resources),
+	.resource	= spi_sh_sci_resources,
+	.dev	= {
+		.platform_data	= &spi_info,
+	},
+};
+
 static struct resource heartbeat_resources[] = {
 	[0] = {
 		.start	= PA_OUTPORT,
@@ -93,11 +111,11 @@ static struct platform_device heartbeat_device = {
 #ifdef CONFIG_MFD_SM501
 static struct plat_serial8250_port uart_platform_data[] = {
 	{
-		.membase	= (void __iomem *)VOYAGER_UART_BASE,
-		.mapbase	= VOYAGER_UART_BASE,
+		.membase	= (void __iomem *)0xb3e30000,
+		.mapbase	= 0xb3e30000,
 		.iotype		= UPIO_MEM,
-		.irq		= IRQ_SM501_U0,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+		.irq		= IRQ_VOYAGER,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ,
 		.regshift	= 2,
 		.uartclk	= (9600 * 16),
 	},
@@ -124,14 +142,67 @@ static struct resource sm501_resources[] = {
 		.flags	= IORESOURCE_MEM,
 	},
 	[2]	= {
-		.start	= IRQ_SM501_CV,
+		.start	= IRQ_VOYAGER,
 		.flags	= IORESOURCE_IRQ,
 	},
 };
 
+static struct fb_videomode sm501_default_mode = {
+	.pixclock	= 35714,
+	.xres		= 640,
+	.yres		= 480,
+	.left_margin	= 105,
+	.right_margin	= 50,
+	.upper_margin	= 35,
+	.lower_margin	= 0,
+	.hsync_len	= 96,
+	.vsync_len	= 2,
+	.sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+};
+
+static struct sm501_platdata_fbsub sm501_pdata_fbsub_pnl = {
+	.def_bpp	= 16,
+	.def_mode	= &sm501_default_mode,
+	.flags		= SM501FB_FLAG_USE_INIT_MODE |
+			  SM501FB_FLAG_USE_HWCURSOR |
+			  SM501FB_FLAG_USE_HWACCEL |
+			  SM501FB_FLAG_DISABLE_AT_EXIT,
+};
+
+static struct sm501_platdata_fbsub sm501_pdata_fbsub_crt = {
+	.flags		= (SM501FB_FLAG_USE_INIT_MODE |
+			   SM501FB_FLAG_USE_HWCURSOR |
+			   SM501FB_FLAG_USE_HWACCEL |
+			   SM501FB_FLAG_DISABLE_AT_EXIT),
+
+};
+
+static struct sm501_platdata_fb sm501_fb_pdata = {
+	.fb_route	= SM501_FB_OWN,
+	.fb_crt		= &sm501_pdata_fbsub_crt,
+	.fb_pnl		= &sm501_pdata_fbsub_pnl,
+	.flags		= SM501_FBPD_SWAP_FB_ENDIAN,
+};
+
+static struct sm501_initdata sm501_initdata = {
+	.gpio_high	= {
+		.set	= 0x00001fe0,
+		.mask	= 0x0,
+	},
+	.devices	= SM501_USE_USB_HOST,
+};
+
+static struct sm501_platdata sm501_platform_data = {
+	.init		= &sm501_initdata,
+	.fb		= &sm501_fb_pdata,
+};
+
 static struct platform_device sm501_device = {
 	.name		= "sm501",
 	.id		= -1,
+	.dev		= {
+		.platform_data	= &sm501_platform_data,
+	},
 	.num_resources	= ARRAY_SIZE(sm501_resources),
 	.resource	= sm501_resources,
 };
@@ -145,10 +216,12 @@ static struct platform_device *rts7751r2d_devices[] __initdata = {
 #endif
 	&cf_ide_device,
 	&heartbeat_device,
+	&spi_sh_sci_device,
 };
 
 static int __init rts7751r2d_devices_setup(void)
 {
+	spi_register_board_info(spi_bus, ARRAY_SIZE(spi_bus));
 	return platform_add_devices(rts7751r2d_devices,
 				    ARRAY_SIZE(rts7751r2d_devices));
 }
@@ -192,6 +265,7 @@ u8 rts7751r2d_readb(void __iomem *addr)
  */
 static void __init rts7751r2d_setup(char **cmdline_p)
 {
+	void __iomem *sm501_reg;
 	u16 ver = ctrl_inw(PA_VERREG);
 
 	printk(KERN_INFO "Renesas Technology Sales RTS7751R2D support.\n");
@@ -202,7 +276,30 @@ static void __init rts7751r2d_setup(char **cmdline_p)
 	ctrl_outw(0x0000, PA_OUTPORT);
 	pm_power_off = rts7751r2d_power_off;
 
-	voyagergx_serial_init();
+	/* sm501 dram configuration:
+	 * ColSizeX = 11 - External Memory Column Size: 256 words.
+	 * APX = 1 - External Memory Active to Pre-Charge Delay: 7 clocks.
+	 * RstX = 1 - External Memory Reset: Normal.
+	 * Rfsh = 1 - Local Memory Refresh to Command Delay: 12 clocks.
+	 * BwC =  1 - Local Memory Block Write Cycle Time: 2 clocks.
+	 * BwP =  1 - Local Memory Block Write to Pre-Charge Delay: 1 clock.
+	 * AP = 1 - Internal Memory Active to Pre-Charge Delay: 7 clocks.
+	 * Rst = 1 - Internal Memory Reset: Normal.
+	 * RA = 1 - Internal Memory Remain in Active State: Do not remain.
+	 */
+
+	sm501_reg = (void __iomem *)0xb3e00000 + SM501_DRAM_CONTROL;
+	writel(readl(sm501_reg) | 0x00f107c0, sm501_reg);
+
+	/*
+	 * Power Mode Gate - Enable UART0
+	 */
+
+	sm501_reg = (void __iomem *)0xb3e00000 + SM501_POWER_MODE_0_GATE;
+	writel(readl(sm501_reg) | (1 << SM501_GATE_UART0), sm501_reg);
+
+	sm501_reg = (void __iomem *)0xb3e00000 + SM501_POWER_MODE_1_GATE;
+	writel(readl(sm501_reg) | (1 << SM501_GATE_UART0), sm501_reg);
 }
 
 /*
@@ -215,8 +312,4 @@ static struct sh_machine_vector mv_rts7751r2d __initmv = {
 	.mv_irq_demux		= rts7751r2d_irq_demux,
 	.mv_writeb		= rts7751r2d_writeb,
 	.mv_readb		= rts7751r2d_readb,
-#if defined(CONFIG_MFD_SM501) && defined(CONFIG_USB_OHCI_HCD)
-	.mv_consistent_alloc	= voyagergx_consistent_alloc,
-	.mv_consistent_free	= voyagergx_consistent_free,
-#endif
 };
diff --git a/arch/sh/boards/renesas/sdk7780/Kconfig b/arch/sh/boards/renesas/sdk7780/Kconfig
new file mode 100644
index 00000000000..e4f5b6985be
--- /dev/null
+++ b/arch/sh/boards/renesas/sdk7780/Kconfig
@@ -0,0 +1,23 @@
+if SH_SDK7780
+
+choice
+	prompt "SDK7780 options"
+	default SH_SDK7780_BASE
+
+config SH_SDK7780_STANDALONE
+	bool "SDK7780 board support"
+	depends on CPU_SUBTYPE_SH7780
+	help
+	  Selecting this option will enable support for the
+	  standalone version of the SDK7780. If in doubt, say Y.
+
+config SH_SDK7780_BASE
+	bool "SDK7780 with base-board support"
+	depends on CPU_SUBTYPE_SH7780
+	help
+	  Selecting this option will enable support for the expansion
+	  baseboard devices. If in doubt, say Y.
+
+endchoice
+
+endif
diff --git a/arch/sh/boards/renesas/sdk7780/Makefile b/arch/sh/boards/renesas/sdk7780/Makefile
new file mode 100644
index 00000000000..3d8f0befc35
--- /dev/null
+++ b/arch/sh/boards/renesas/sdk7780/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the SDK7780 specific parts of the kernel
+#
+obj-y	 := setup.o irq.o
+
diff --git a/arch/sh/boards/renesas/sdk7780/irq.c b/arch/sh/boards/renesas/sdk7780/irq.c
new file mode 100644
index 00000000000..87cdc578f6f
--- /dev/null
+++ b/arch/sh/boards/renesas/sdk7780/irq.c
@@ -0,0 +1,46 @@
+/*
+ * linux/arch/sh/boards/renesas/sdk7780/irq.c
+ *
+ * Renesas Technology Europe SDK7780 Support.
+ *
+ * Copyright (C) 2008  Nicholas Beck <nbeck@mpc-data.co.uk>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <asm/sdk7780.h>
+
+enum {
+	UNUSED = 0,
+	/* board specific interrupt sources */
+	SMC91C111,	/* Ethernet controller */
+};
+
+static struct intc_vect fpga_vectors[] __initdata = {
+	INTC_IRQ(SMC91C111, IRQ_ETHERNET),
+};
+
+static struct intc_mask_reg fpga_mask_registers[] __initdata = {
+	{ 0, FPGA_IRQ0MR, 16,
+	  { 0, 0, 0, 0, 0, 0, 0, 0,
+	    0, 0, 0, SMC91C111, 0, 0, 0, 0 } },
+};
+
+static DECLARE_INTC_DESC(fpga_intc_desc, "sdk7780-irq", fpga_vectors,
+			 NULL, fpga_mask_registers, NULL, NULL);
+
+void __init init_sdk7780_IRQ(void)
+{
+	printk(KERN_INFO "Using SDK7780 interrupt controller.\n");
+
+	ctrl_outw(0xFFFF, FPGA_IRQ0MR);
+	/* Setup IRL 0-3 */
+	ctrl_outw(0x0003, FPGA_IMSR);
+	plat_irq_setup_pins(IRQ_MODE_IRL3210);
+
+	register_intc_controller(&fpga_intc_desc);
+}
diff --git a/arch/sh/boards/renesas/sdk7780/setup.c b/arch/sh/boards/renesas/sdk7780/setup.c
new file mode 100644
index 00000000000..5df32f20187
--- /dev/null
+++ b/arch/sh/boards/renesas/sdk7780/setup.c
@@ -0,0 +1,109 @@
+/*
+ * arch/sh/boards/renesas/sdk7780/setup.c
+ *
+ * Renesas Solutions SH7780 SDK Support
+ * Copyright (C) 2008 Nicholas Beck <nbeck@mpc-data.co.uk>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/platform_device.h>
+#include <linux/pata_platform.h>
+#include <asm/machvec.h>
+#include <asm/sdk7780.h>
+#include <asm/heartbeat.h>
+#include <asm/io.h>
+#include <asm/addrspace.h>
+
+#define GPIO_PECR        0xFFEA0008
+
+//* Heartbeat */
+static struct heartbeat_data heartbeat_data = {
+	.regsize = 16,
+};
+
+static struct resource heartbeat_resources[] = {
+	[0] = {
+		.start  = PA_LED,
+		.end    = PA_LED,
+		.flags  = IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device heartbeat_device = {
+	.name           = "heartbeat",
+	.id             = -1,
+	.dev = {
+		.platform_data = &heartbeat_data,
+	},
+	.num_resources  = ARRAY_SIZE(heartbeat_resources),
+	.resource       = heartbeat_resources,
+};
+
+/* SMC91x */
+static struct resource smc91x_eth_resources[] = {
+	[0] = {
+		.name   = "smc91x-regs" ,
+		.start  = PA_LAN + 0x300,
+		.end    = PA_LAN + 0x300 + 0x10 ,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = IRQ_ETHERNET,
+		.end    = IRQ_ETHERNET,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device smc91x_eth_device = {
+	.name           = "smc91x",
+	.id             = 0,
+	.dev = {
+		.dma_mask               = NULL,         /* don't use dma */
+		.coherent_dma_mask      = 0xffffffff,
+	},
+	.num_resources  = ARRAY_SIZE(smc91x_eth_resources),
+	.resource       = smc91x_eth_resources,
+};
+
+static struct platform_device *sdk7780_devices[] __initdata = {
+	&heartbeat_device,
+	&smc91x_eth_device,
+};
+
+static int __init sdk7780_devices_setup(void)
+{
+	return platform_add_devices(sdk7780_devices,
+		ARRAY_SIZE(sdk7780_devices));
+}
+device_initcall(sdk7780_devices_setup);
+
+static void __init sdk7780_setup(char **cmdline_p)
+{
+	u16 ver = ctrl_inw(FPGA_FPVERR);
+	u16 dateStamp = ctrl_inw(FPGA_FPDATER);
+
+	printk(KERN_INFO "Renesas Technology Europe SDK7780 support.\n");
+	printk(KERN_INFO "Board version: %d (revision %d), "
+			 "FPGA version: %d (revision %d), datestamp : %d\n",
+			 (ver >> 12) & 0xf, (ver >> 8) & 0xf,
+			 (ver >>  4) & 0xf, ver & 0xf,
+			 dateStamp);
+
+	/* Setup pin mux'ing for PCIC */
+	ctrl_outw(0x0000, GPIO_PECR);
+}
+
+/*
+ * The Machine Vector
+ */
+static struct sh_machine_vector mv_se7780 __initmv = {
+	.mv_name        = "Renesas SDK7780-R3" ,
+	.mv_setup		= sdk7780_setup,
+	.mv_nr_irqs		= 111,
+	.mv_init_irq	= init_sdk7780_IRQ,
+};
+