sh: mach-edosk7705: Fix up edosk7705 so it all builds again.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

3 files changed, 20 insertions, 51 deletions

diff --git a/arch/sh/boards/mach-edosk7705/Makefile b/arch/sh/boards/mach-edosk7705/Makefile
index 14bdd531f11..cd54acb5149 100644
--- a/arch/sh/boards/mach-edosk7705/Makefile
+++ b/arch/sh/boards/mach-edosk7705/Makefile
@@ -3,4 +3,3 @@
 #
 
 obj-y	 := setup.o io.o
-
diff --git a/arch/sh/boards/mach-edosk7705/io.c b/arch/sh/boards/mach-edosk7705/io.c
index 7d153e50a01..5b9c57c4324 100644
--- a/arch/sh/boards/mach-edosk7705/io.c
+++ b/arch/sh/boards/mach-edosk7705/io.c
@@ -10,28 +10,24 @@
 
 #include <linux/kernel.h>
 #include <linux/types.h>
-#include <asm/io.h>
+#include <linux/io.h>
 #include <mach/edosk7705.h>
 #include <asm/addrspace.h>
 
 #define SMC_IOADDR	0xA2000000
 
-#define maybebadio(name,port) \
-  printk("bad PC-like io %s for port 0x%lx at 0x%08x\n", \
-	 #name, (port), (__u32) __builtin_return_address(0))
-
 /* Map the Ethernet addresses as if it is at 0x300 - 0x320 */
-unsigned long sh_edosk7705_isa_port2addr(unsigned long port)
+static unsigned long sh_edosk7705_isa_port2addr(unsigned long port)
 {
-     if (port >= 0x300 && port < 0x320) {
-	  /* SMC91C96 registers are 4 byte aligned rather than the
-	   * usual 2 byte!
-	   */
-	  return SMC_IOADDR + ( (port - 0x300) * 2);
-     }
+	/*
+	 * SMC91C96 registers are 4 byte aligned rather than the
+	 * usual 2 byte!
+	 */
+	if (port >= 0x300 && port < 0x320)
+		return SMC_IOADDR + ((port - 0x300) * 2);
 
-     maybebadio(sh_edosk7705_isa_port2addr, port);
-     return port;
+	maybebadio(port);
+	return port;
 }
 
 /* Trying to read / write bytes on odd-byte boundaries to the Ethernet
@@ -42,53 +38,34 @@ unsigned long sh_edosk7705_isa_port2addr(unsigned long port)
  */
 unsigned char sh_edosk7705_inb(unsigned long port)
 {
-	if (port >= 0x300 && port < 0x320 && port & 0x01) {
-		return (volatile unsigned char)(generic_inw(port -1) >> 8);
-	}
-	return *(volatile unsigned char *)sh_edosk7705_isa_port2addr(port);
-}
+	if (port >= 0x300 && port < 0x320 && port & 0x01)
+		return __raw_readw(port - 1) >> 8;
 
-unsigned int sh_edosk7705_inl(unsigned long port)
-{
-	return *(volatile unsigned long *)port;
+	return __raw_readb(sh_edosk7705_isa_port2addr(port));
 }
 
 void sh_edosk7705_outb(unsigned char value, unsigned long port)
 {
 	if (port >= 0x300 && port < 0x320 && port & 0x01) {
-		generic_outw(((unsigned short)value << 8), port -1);
+		__raw_writew(((unsigned short)value << 8), port - 1);
 		return;
 	}
-	*(volatile unsigned char *)sh_edosk7705_isa_port2addr(port) = value;
-}
 
-void sh_edosk7705_outl(unsigned int value, unsigned long port)
-{
-	*(volatile unsigned long *)port = value;
+	__raw_writeb(value, sh_edosk7705_isa_port2addr(port));
 }
 
 void sh_edosk7705_insb(unsigned long port, void *addr, unsigned long count)
 {
 	unsigned char *p = addr;
-	while (count--) *p++ = sh_edosk7705_inb(port);
-}
 
-void sh_edosk7705_insl(unsigned long port, void *addr, unsigned long count)
-{
-	unsigned long *p = (unsigned long*)addr;
 	while (count--)
-		*p++ = *(volatile unsigned long *)port;
+		*p++ = sh_edosk7705_inb(port);
 }
 
 void sh_edosk7705_outsb(unsigned long port, const void *addr, unsigned long count)
 {
-	unsigned char *p = (unsigned char*)addr;
-	while (count--) sh_edosk7705_outb(*p++, port);
-}
+	unsigned char *p = (unsigned char *)addr;
 
-void sh_edosk7705_outsl(unsigned long port, const void *addr, unsigned long count)
-{
-	unsigned long *p = (unsigned long*)addr;
-	while (count--) sh_edosk7705_outl(*p++, port);
+	while (count--)
+		sh_edosk7705_outb(*p++, port);
 }
-
diff --git a/arch/sh/boards/mach-edosk7705/setup.c b/arch/sh/boards/mach-edosk7705/setup.c
index ab3f47bffdf..d59225e26fb 100644
--- a/arch/sh/boards/mach-edosk7705/setup.c
+++ b/arch/sh/boards/mach-edosk7705/setup.c
@@ -9,6 +9,7 @@
  * board by S. Dunn, 2003.
  */
 #include <linux/init.h>
+#include <linux/irq.h>
 #include <asm/machvec.h>
 #include <mach/edosk7705.h>
 
@@ -26,18 +27,10 @@ static struct sh_machine_vector mv_edosk7705 __initmv = {
 	.mv_nr_irqs		= 80,
 
 	.mv_inb			= sh_edosk7705_inb,
-	.mv_inl			= sh_edosk7705_inl,
 	.mv_outb		= sh_edosk7705_outb,
-	.mv_outl		= sh_edosk7705_outl,
-
-	.mv_inl_p		= sh_edosk7705_inl,
-	.mv_outl_p		= sh_edosk7705_outl,
 
 	.mv_insb		= sh_edosk7705_insb,
-	.mv_insl		= sh_edosk7705_insl,
 	.mv_outsb		= sh_edosk7705_outsb,
-	.mv_outsl		= sh_edosk7705_outsl,
 
-	.mv_isa_port2addr	= sh_edosk7705_isa_port2addr,
 	.mv_init_irq		= sh_edosk7705_init_irq,
 };