sh: Move mach-cayman in with the rest of the boards.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

4 files changed, 440 insertions, 0 deletions

diff --git a/arch/sh/boards/cayman/Makefile b/arch/sh/boards/cayman/Makefile
new file mode 100644
index 00000000000..489a8f86736
--- /dev/null
+++ b/arch/sh/boards/cayman/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the Hitachi Cayman specific parts of the kernel
+#
+obj-y := setup.o irq.o
+obj-$(CONFIG_HEARTBEAT)	+= led.o
diff --git a/arch/sh/boards/cayman/irq.c b/arch/sh/boards/cayman/irq.c
new file mode 100644
index 00000000000..30ec7bebfaf
--- /dev/null
+++ b/arch/sh/boards/cayman/irq.c
@@ -0,0 +1,197 @@
+/*
+ * arch/sh/mach-cayman/irq.c - SH-5 Cayman Interrupt Support
+ *
+ * This file handles the board specific parts of the Cayman interrupt system
+ *
+ * Copyright (C) 2002 Stuart Menefy
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/signal.h>
+#include <asm/cpu/irq.h>
+#include <asm/page.h>
+
+/* Setup for the SMSC FDC37C935 / LAN91C100FD */
+#define SMSC_IRQ         IRQ_IRL1
+
+/* Setup for PCI Bus 2, which transmits interrupts via the EPLD */
+#define PCI2_IRQ         IRQ_IRL3
+
+unsigned long epld_virt;
+
+#define EPLD_BASE        0x04002000
+#define EPLD_STATUS_BASE (epld_virt + 0x10)
+#define EPLD_MASK_BASE   (epld_virt + 0x20)
+
+/* Note the SMSC SuperIO chip and SMSC LAN chip interrupts are all muxed onto
+   the same SH-5 interrupt */
+
+static irqreturn_t cayman_interrupt_smsc(int irq, void *dev_id)
+{
+        printk(KERN_INFO "CAYMAN: spurious SMSC interrupt\n");
+	return IRQ_NONE;
+}
+
+static irqreturn_t cayman_interrupt_pci2(int irq, void *dev_id)
+{
+        printk(KERN_INFO "CAYMAN: spurious PCI interrupt, IRQ %d\n", irq);
+	return IRQ_NONE;
+}
+
+static struct irqaction cayman_action_smsc = {
+	.name		= "Cayman SMSC Mux",
+	.handler	= cayman_interrupt_smsc,
+	.flags		= IRQF_DISABLED,
+};
+
+static struct irqaction cayman_action_pci2 = {
+	.name		= "Cayman PCI2 Mux",
+	.handler	= cayman_interrupt_pci2,
+	.flags		= IRQF_DISABLED,
+};
+
+static void enable_cayman_irq(unsigned int irq)
+{
+	unsigned long flags;
+	unsigned long mask;
+	unsigned int reg;
+	unsigned char bit;
+
+	irq -= START_EXT_IRQS;
+	reg = EPLD_MASK_BASE + ((irq / 8) << 2);
+	bit = 1<<(irq % 8);
+	local_irq_save(flags);
+	mask = ctrl_inl(reg);
+	mask |= bit;
+	ctrl_outl(mask, reg);
+	local_irq_restore(flags);
+}
+
+void disable_cayman_irq(unsigned int irq)
+{
+	unsigned long flags;
+	unsigned long mask;
+	unsigned int reg;
+	unsigned char bit;
+
+	irq -= START_EXT_IRQS;
+	reg = EPLD_MASK_BASE + ((irq / 8) << 2);
+	bit = 1<<(irq % 8);
+	local_irq_save(flags);
+	mask = ctrl_inl(reg);
+	mask &= ~bit;
+	ctrl_outl(mask, reg);
+	local_irq_restore(flags);
+}
+
+static void ack_cayman_irq(unsigned int irq)
+{
+	disable_cayman_irq(irq);
+}
+
+static void end_cayman_irq(unsigned int irq)
+{
+	if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
+		enable_cayman_irq(irq);
+}
+
+static unsigned int startup_cayman_irq(unsigned int irq)
+{
+	enable_cayman_irq(irq);
+	return 0; /* never anything pending */
+}
+
+static void shutdown_cayman_irq(unsigned int irq)
+{
+	disable_cayman_irq(irq);
+}
+
+struct hw_interrupt_type cayman_irq_type = {
+	.typename	= "Cayman-IRQ",
+	.startup	= startup_cayman_irq,
+	.shutdown	= shutdown_cayman_irq,
+	.enable		= enable_cayman_irq,
+	.disable	= disable_cayman_irq,
+	.ack		= ack_cayman_irq,
+	.end		= end_cayman_irq,
+};
+
+int cayman_irq_demux(int evt)
+{
+	int irq = intc_evt_to_irq[evt];
+
+	if (irq == SMSC_IRQ) {
+		unsigned long status;
+		int i;
+
+		status = ctrl_inl(EPLD_STATUS_BASE) &
+			 ctrl_inl(EPLD_MASK_BASE) & 0xff;
+		if (status == 0) {
+			irq = -1;
+		} else {
+			for (i=0; i<8; i++) {
+				if (status & (1<<i))
+					break;
+			}
+			irq = START_EXT_IRQS + i;
+		}
+	}
+
+	if (irq == PCI2_IRQ) {
+		unsigned long status;
+		int i;
+
+		status = ctrl_inl(EPLD_STATUS_BASE + 3 * sizeof(u32)) &
+			 ctrl_inl(EPLD_MASK_BASE + 3 * sizeof(u32)) & 0xff;
+		if (status == 0) {
+			irq = -1;
+		} else {
+			for (i=0; i<8; i++) {
+				if (status & (1<<i))
+					break;
+			}
+			irq = START_EXT_IRQS + (3 * 8) + i;
+		}
+	}
+
+	return irq;
+}
+
+#if defined(CONFIG_PROC_FS) && defined(CONFIG_SYSCTL)
+int cayman_irq_describe(char* p, int irq)
+{
+	if (irq < NR_INTC_IRQS) {
+		return intc_irq_describe(p, irq);
+	} else if (irq < NR_INTC_IRQS + 8) {
+		return sprintf(p, "(SMSC %d)", irq - NR_INTC_IRQS);
+	} else if ((irq >= NR_INTC_IRQS + 24) && (irq < NR_INTC_IRQS + 32)) {
+		return sprintf(p, "(PCI2 %d)", irq - (NR_INTC_IRQS + 24));
+	}
+
+	return 0;
+}
+#endif
+
+void init_cayman_irq(void)
+{
+	int i;
+
+	epld_virt = onchip_remap(EPLD_BASE, 1024, "EPLD");
+	if (!epld_virt) {
+		printk(KERN_ERR "Cayman IRQ: Unable to remap EPLD\n");
+		return;
+	}
+
+	for (i=0; i<NR_EXT_IRQS; i++) {
+		irq_desc[START_EXT_IRQS + i].chip = &cayman_irq_type;
+	}
+
+	/* Setup the SMSC interrupt */
+	setup_irq(SMSC_IRQ, &cayman_action_smsc);
+	setup_irq(PCI2_IRQ, &cayman_action_pci2);
+}
diff --git a/arch/sh/boards/cayman/led.c b/arch/sh/boards/cayman/led.c
new file mode 100644
index 00000000000..b4e122fd950
--- /dev/null
+++ b/arch/sh/boards/cayman/led.c
@@ -0,0 +1,51 @@
+/*
+ * arch/sh64/mach-cayman/led.c
+ *
+ * Copyright (C) 2002 Stuart Menefy <stuart.menefy@st.com>
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License.  See linux/COPYING for more information.
+ *
+ * Flash the LEDs
+ */
+#include <asm/io.h>
+
+/*
+** It is supposed these functions to be used for a low level
+** debugging (via Cayman LEDs), hence to be available as soon
+** as possible.
+** Unfortunately Cayman LEDs relies on Cayman EPLD to be mapped
+** (this happen when IRQ are initialized... quite late).
+** These triky dependencies should be removed. Temporary, it
+** may be enough to NOP until EPLD is mapped.
+*/
+
+extern unsigned long epld_virt;
+
+#define LED_ADDR      (epld_virt + 0x008)
+#define HDSP2534_ADDR (epld_virt + 0x100)
+
+void mach_led(int position, int value)
+{
+	if (!epld_virt)
+		return;
+
+	if (value)
+		ctrl_outl(0, LED_ADDR);
+	else
+		ctrl_outl(1, LED_ADDR);
+
+}
+
+void mach_alphanum(int position, unsigned char value)
+{
+	if (!epld_virt)
+		return;
+
+	ctrl_outb(value, HDSP2534_ADDR + 0xe0 + (position << 2));
+}
+
+void mach_alphanum_brightness(int setting)
+{
+	ctrl_outb(setting & 7, HDSP2534_ADDR + 0xc0);
+}
diff --git a/arch/sh/boards/cayman/setup.c b/arch/sh/boards/cayman/setup.c
new file mode 100644
index 00000000000..8c9fa472d8f
--- /dev/null
+++ b/arch/sh/boards/cayman/setup.c
@@ -0,0 +1,187 @@
+/*
+ * arch/sh/mach-cayman/setup.c
+ *
+ * SH5 Cayman support
+ *
+ * Copyright (C) 2002  David J. Mckay & Benedict Gaster
+ * Copyright (C) 2003 - 2007  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <asm/cpu/irq.h>
+
+/*
+ * Platform Dependent Interrupt Priorities.
+ */
+
+/* Using defaults defined in irq.h */
+#define	RES NO_PRIORITY		/* Disabled */
+#define IR0 IRL0_PRIORITY	/* IRLs */
+#define IR1 IRL1_PRIORITY
+#define IR2 IRL2_PRIORITY
+#define IR3 IRL3_PRIORITY
+#define PCA INTA_PRIORITY	/* PCI Ints */
+#define PCB INTB_PRIORITY
+#define PCC INTC_PRIORITY
+#define PCD INTD_PRIORITY
+#define SER TOP_PRIORITY
+#define ERR TOP_PRIORITY
+#define PW0 TOP_PRIORITY
+#define PW1 TOP_PRIORITY
+#define PW2 TOP_PRIORITY
+#define PW3 TOP_PRIORITY
+#define DM0 NO_PRIORITY		/* DMA Ints */
+#define DM1 NO_PRIORITY
+#define DM2 NO_PRIORITY
+#define DM3 NO_PRIORITY
+#define DAE NO_PRIORITY
+#define TU0 TIMER_PRIORITY	/* TMU Ints */
+#define TU1 NO_PRIORITY
+#define TU2 NO_PRIORITY
+#define TI2 NO_PRIORITY
+#define ATI NO_PRIORITY		/* RTC Ints */
+#define PRI NO_PRIORITY
+#define CUI RTC_PRIORITY
+#define ERI SCIF_PRIORITY	/* SCIF Ints */
+#define RXI SCIF_PRIORITY
+#define BRI SCIF_PRIORITY
+#define TXI SCIF_PRIORITY
+#define ITI TOP_PRIORITY	/* WDT Ints */
+
+/* Setup for the SMSC FDC37C935 */
+#define SMSC_SUPERIO_BASE	0x04000000
+#define SMSC_CONFIG_PORT_ADDR	0x3f0
+#define SMSC_INDEX_PORT_ADDR	SMSC_CONFIG_PORT_ADDR
+#define SMSC_DATA_PORT_ADDR	0x3f1
+
+#define SMSC_ENTER_CONFIG_KEY	0x55
+#define SMSC_EXIT_CONFIG_KEY	0xaa
+
+#define SMCS_LOGICAL_DEV_INDEX	0x07
+#define SMSC_DEVICE_ID_INDEX	0x20
+#define SMSC_DEVICE_REV_INDEX	0x21
+#define SMSC_ACTIVATE_INDEX	0x30
+#define SMSC_PRIMARY_BASE_INDEX  0x60
+#define SMSC_SECONDARY_BASE_INDEX 0x62
+#define SMSC_PRIMARY_INT_INDEX	0x70
+#define SMSC_SECONDARY_INT_INDEX 0x72
+
+#define SMSC_IDE1_DEVICE	1
+#define SMSC_KEYBOARD_DEVICE	7
+#define SMSC_CONFIG_REGISTERS	8
+
+#define SMSC_SUPERIO_READ_INDEXED(index) ({ \
+	outb((index), SMSC_INDEX_PORT_ADDR); \
+	inb(SMSC_DATA_PORT_ADDR); })
+#define SMSC_SUPERIO_WRITE_INDEXED(val, index) ({ \
+	outb((index), SMSC_INDEX_PORT_ADDR); \
+	outb((val),   SMSC_DATA_PORT_ADDR); })
+
+#define IDE1_PRIMARY_BASE	0x01f0
+#define IDE1_SECONDARY_BASE	0x03f6
+
+unsigned long smsc_superio_virt;
+
+int platform_int_priority[NR_INTC_IRQS] = {
+	IR0, IR1, IR2, IR3, PCA, PCB, PCC, PCD,	/* IRQ  0- 7 */
+	RES, RES, RES, RES, SER, ERR, PW3, PW2,	/* IRQ  8-15 */
+	PW1, PW0, DM0, DM1, DM2, DM3, DAE, RES,	/* IRQ 16-23 */
+	RES, RES, RES, RES, RES, RES, RES, RES,	/* IRQ 24-31 */
+	TU0, TU1, TU2, TI2, ATI, PRI, CUI, ERI,	/* IRQ 32-39 */
+	RXI, BRI, TXI, RES, RES, RES, RES, RES,	/* IRQ 40-47 */
+	RES, RES, RES, RES, RES, RES, RES, RES,	/* IRQ 48-55 */
+	RES, RES, RES, RES, RES, RES, RES, ITI,	/* IRQ 56-63 */
+};
+
+static int __init smsc_superio_setup(void)
+{
+	unsigned char devid, devrev;
+
+	smsc_superio_virt = onchip_remap(SMSC_SUPERIO_BASE, 1024, "SMSC SuperIO");
+	if (!smsc_superio_virt) {
+		panic("Unable to remap SMSC SuperIO\n");
+	}
+
+	/* Initially the chip is in run state */
+	/* Put it into configuration state */
+	outb(SMSC_ENTER_CONFIG_KEY, SMSC_CONFIG_PORT_ADDR);
+	outb(SMSC_ENTER_CONFIG_KEY, SMSC_CONFIG_PORT_ADDR);
+
+	/* Read device ID info */
+	devid = SMSC_SUPERIO_READ_INDEXED(SMSC_DEVICE_ID_INDEX);
+	devrev = SMSC_SUPERIO_READ_INDEXED(SMSC_DEVICE_REV_INDEX);
+	printk("SMSC SuperIO devid %02x rev %02x\n", devid, devrev);
+
+	/* Select the keyboard device */
+	SMSC_SUPERIO_WRITE_INDEXED(SMSC_KEYBOARD_DEVICE, SMCS_LOGICAL_DEV_INDEX);
+
+	/* enable it */
+	SMSC_SUPERIO_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX);
+
+	/* Select the interrupts */
+	/* On a PC keyboard is IRQ1, mouse is IRQ12 */
+	SMSC_SUPERIO_WRITE_INDEXED(1, SMSC_PRIMARY_INT_INDEX);
+	SMSC_SUPERIO_WRITE_INDEXED(12, SMSC_SECONDARY_INT_INDEX);
+
+#ifdef CONFIG_IDE
+	/*
+	 * Only IDE1 exists on the Cayman
+	 */
+
+	/* Power it on */
+	SMSC_SUPERIO_WRITE_INDEXED(1 << SMSC_IDE1_DEVICE, 0x22);
+
+	SMSC_SUPERIO_WRITE_INDEXED(SMSC_IDE1_DEVICE, SMCS_LOGICAL_DEV_INDEX);
+	SMSC_SUPERIO_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX);
+
+	SMSC_SUPERIO_WRITE_INDEXED(IDE1_PRIMARY_BASE >> 8,
+				   SMSC_PRIMARY_BASE_INDEX + 0);
+	SMSC_SUPERIO_WRITE_INDEXED(IDE1_PRIMARY_BASE & 0xff,
+				   SMSC_PRIMARY_BASE_INDEX + 1);
+
+	SMSC_SUPERIO_WRITE_INDEXED(IDE1_SECONDARY_BASE >> 8,
+				   SMSC_SECONDARY_BASE_INDEX + 0);
+	SMSC_SUPERIO_WRITE_INDEXED(IDE1_SECONDARY_BASE & 0xff,
+				   SMSC_SECONDARY_BASE_INDEX + 1);
+
+	SMSC_SUPERIO_WRITE_INDEXED(14, SMSC_PRIMARY_INT_INDEX);
+
+	SMSC_SUPERIO_WRITE_INDEXED(SMSC_CONFIG_REGISTERS,
+				   SMCS_LOGICAL_DEV_INDEX);
+
+	SMSC_SUPERIO_WRITE_INDEXED(0x00, 0xc2); /* GP42 = nIDE1_OE */
+	SMSC_SUPERIO_WRITE_INDEXED(0x01, 0xc5); /* GP45 = IDE1_IRQ */
+	SMSC_SUPERIO_WRITE_INDEXED(0x00, 0xc6); /* GP46 = nIOROP */
+	SMSC_SUPERIO_WRITE_INDEXED(0x00, 0xc7); /* GP47 = nIOWOP */
+#endif
+
+	/* Exit the configuration state */
+	outb(SMSC_EXIT_CONFIG_KEY, SMSC_CONFIG_PORT_ADDR);
+
+	return 0;
+}
+__initcall(smsc_superio_setup);
+
+static void __iomem *cayman_ioport_map(unsigned long port, unsigned int len)
+{
+	if (port < 0x400) {
+		extern unsigned long smsc_superio_virt;
+		return (void __iomem *)((port << 2) | smsc_superio_virt);
+	}
+
+	return (void __iomem *)port;
+}
+
+extern void init_cayman_irq(void);
+
+static struct sh_machine_vector mv_cayman __initmv = {
+	.mv_name		= "Hitachi Cayman",
+	.mv_nr_irqs		= 64,
+	.mv_ioport_map		= cayman_ioport_map,
+	.mv_init_irq		= init_cayman_irq,
+};