diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2010-02-26 16:54:27 -0800 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2010-02-26 16:54:27 -0800 |
commit | 64d497f55379b1e320a08ec2426468d96f5642ec (patch) | |
tree | 22b9ab3c5e69c5cc2728cbc2ca7fc7623beef8f1 /arch/sh/drivers/dma/dmabrg.c | |
parent | 37d4008484977f60d5d37499a2670c79b214dd46 (diff) | |
parent | b5f5fe80fa98a60daa0fa94512d1599b1e26674c (diff) |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (187 commits)
sh: remove dead LED code for migo-r and ms7724se
sh: ecovec build fix for CONFIG_I2C=n
sh: ecovec r-standby support
sh: ms7724se r-standby support
sh: SH-Mobile R-standby register save/restore
clocksource: Fix up a registration/IRQ race in the sh drivers.
sh: ms7724: modify scan_timing for KEYSC
sh: ms7724: Add sh_sir support
sh: mach-ecovec24: Add sh_sir support
sh: wire up SET/GET_UNALIGN_CTL.
sh: allow alignment fault mode to be configured at kernel boot.
sh: sh7724: Update FSI/SPU2 clock
sh: always enable sh7724 vpu_clk and set to 166MHz on Ecovec
sh: add sh7724 kick callback to clk_div4_table
sh: introduce struct clk_div4_table
sh: clock-cpg div4 set_rate() shift fix
sh: Turn on speculative return for SH7785 and SH7786
sh: Merge legacy and dynamic PMB modes.
sh: Use uncached I/O helpers in PMB setup.
sh: Provide uncached I/O helpers.
...
Diffstat (limited to 'arch/sh/drivers/dma/dmabrg.c')
-rw-r--r-- | arch/sh/drivers/dma/dmabrg.c | 22 |
1 files changed, 11 insertions, 11 deletions
diff --git a/arch/sh/drivers/dma/dmabrg.c b/arch/sh/drivers/dma/dmabrg.c index 5e22689c2fc..72622e30761 100644 --- a/arch/sh/drivers/dma/dmabrg.c +++ b/arch/sh/drivers/dma/dmabrg.c @@ -86,8 +86,8 @@ static irqreturn_t dmabrg_irq(int irq, void *data) unsigned long dcr; unsigned int i; - dcr = ctrl_inl(DMABRGCR); - ctrl_outl(dcr & ~0x00ff0003, DMABRGCR); /* ack all */ + dcr = __raw_readl(DMABRGCR); + __raw_writel(dcr & ~0x00ff0003, DMABRGCR); /* ack all */ dcr &= dcr >> 8; /* ignore masked */ /* USB stuff, get it out of the way first */ @@ -109,17 +109,17 @@ static irqreturn_t dmabrg_irq(int irq, void *data) static void dmabrg_disable_irq(unsigned int dmairq) { unsigned long dcr; - dcr = ctrl_inl(DMABRGCR); + dcr = __raw_readl(DMABRGCR); dcr &= ~(1 << ((dmairq > 1) ? dmairq + 22 : dmairq + 8)); - ctrl_outl(dcr, DMABRGCR); + __raw_writel(dcr, DMABRGCR); } static void dmabrg_enable_irq(unsigned int dmairq) { unsigned long dcr; - dcr = ctrl_inl(DMABRGCR); + dcr = __raw_readl(DMABRGCR); dcr |= (1 << ((dmairq > 1) ? dmairq + 22 : dmairq + 8)); - ctrl_outl(dcr, DMABRGCR); + __raw_writel(dcr, DMABRGCR); } int dmabrg_request_irq(unsigned int dmairq, void(*handler)(void*), @@ -165,13 +165,13 @@ static int __init dmabrg_init(void) printk(KERN_INFO "DMABRG: DMAC ch0 not reserved!\n"); #endif - ctrl_outl(0, DMABRGCR); - ctrl_outl(0, DMACHCR0); - ctrl_outl(0x94000000, DMARSRA); /* enable DMABRG in DMAC 0 */ + __raw_writel(0, DMABRGCR); + __raw_writel(0, DMACHCR0); + __raw_writel(0x94000000, DMARSRA); /* enable DMABRG in DMAC 0 */ /* enable DMABRG mode, enable the DMAC */ - or = ctrl_inl(DMAOR); - ctrl_outl(or | DMAOR_BRG | DMAOR_DMEN, DMAOR); + or = __raw_readl(DMAOR); + __raw_writel(or | DMAOR_BRG | DMAOR_DMEN, DMAOR); ret = request_irq(DMABRGI0, dmabrg_irq, IRQF_DISABLED, "DMABRG USB address error", NULL); |