sh: Kill off the rest of arch/sh64/kernel/.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

1 files changed, 536 insertions, 0 deletions

diff --git a/arch/sh/drivers/pci/pci-sh5.c b/arch/sh/drivers/pci/pci-sh5.c
new file mode 100644
index 00000000000..b4d9534d2b0
--- /dev/null
+++ b/arch/sh/drivers/pci/pci-sh5.c
@@ -0,0 +1,536 @@
+/*
+ * Copyright (C) 2001 David J. Mckay (david.mckay@st.com)
+ * Copyright (C) 2003, 2004 Paul Mundt
+ * Copyright (C) 2004 Richard Curnow
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License.  See linux/COPYING for more information.
+ *
+ * Support functions for the SH5 PCI hardware.
+ */
+
+#include <linux/kernel.h>
+#include <linux/rwsem.h>
+#include <linux/smp.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/types.h>
+#include <asm/pci.h>
+#include <linux/irq.h>
+
+#include <asm/io.h>
+#include <asm/hardware.h>
+#include "pci_sh5.h"
+
+static unsigned long pcicr_virt;
+unsigned long pciio_virt;
+
+static void __init pci_fixup_ide_bases(struct pci_dev *d)
+{
+	int i;
+
+	/*
+	 * PCI IDE controllers use non-standard I/O port decoding, respect it.
+	 */
+	if ((d->class >> 8) != PCI_CLASS_STORAGE_IDE)
+		return;
+	printk("PCI: IDE base address fixup for %s\n", pci_name(d));
+	for(i=0; i<4; i++) {
+		struct resource *r = &d->resource[i];
+		if ((r->start & ~0x80) == 0x374) {
+			r->start |= 2;
+			r->end = r->start;
+		}
+	}
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pci_fixup_ide_bases);
+
+char * __devinit pcibios_setup(char *str)
+{
+	return str;
+}
+
+/* Rounds a number UP to the nearest power of two. Used for
+ * sizing the PCI window.
+ */
+static u32 __init r2p2(u32 num)
+{
+	int i = 31;
+	u32 tmp = num;
+
+	if (num == 0)
+		return 0;
+
+	do {
+		if (tmp & (1 << 31))
+			break;
+		i--;
+		tmp <<= 1;
+	} while (i >= 0);
+
+	tmp = 1 << i;
+	/* If the original number isn't a power of 2, round it up */
+	if (tmp != num)
+		tmp <<= 1;
+
+	return tmp;
+}
+
+extern unsigned long long memory_start, memory_end;
+
+int __init sh5pci_init(unsigned memStart, unsigned memSize)
+{
+	u32 lsr0;
+	u32 uval;
+
+	pcicr_virt = onchip_remap(SH5PCI_ICR_BASE, 1024, "PCICR");
+	if (!pcicr_virt) {
+		panic("Unable to remap PCICR\n");
+	}
+
+	pciio_virt = onchip_remap(SH5PCI_IO_BASE, 0x10000, "PCIIO");
+	if (!pciio_virt) {
+		panic("Unable to remap PCIIO\n");
+	}
+
+	pr_debug("Register base addres is 0x%08lx\n", pcicr_virt);
+
+	/* Clear snoop registers */
+        SH5PCI_WRITE(CSCR0, 0);
+        SH5PCI_WRITE(CSCR1, 0);
+
+	pr_debug("Wrote to reg\n");
+
+        /* Switch off interrupts */
+        SH5PCI_WRITE(INTM,  0);
+        SH5PCI_WRITE(AINTM, 0);
+        SH5PCI_WRITE(PINTM, 0);
+
+        /* Set bus active, take it out of reset */
+        uval = SH5PCI_READ(CR);
+
+	/* Set command Register */
+        SH5PCI_WRITE(CR, uval | CR_LOCK_MASK | CR_CFINT| CR_FTO | CR_PFE | CR_PFCS | CR_BMAM);
+
+	uval=SH5PCI_READ(CR);
+        pr_debug("CR is actually 0x%08x\n",uval);
+
+        /* Allow it to be a master */
+	/* NB - WE DISABLE I/O ACCESS to stop overlap */
+        /* set WAIT bit to enable stepping, an attempt to improve stability */
+	SH5PCI_WRITE_SHORT(CSR_CMD,
+			    PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | PCI_COMMAND_WAIT);
+
+        /*
+        ** Set translation mapping memory in order to convert the address
+        ** used for the main bus, to the PCI internal address.
+        */
+        SH5PCI_WRITE(MBR,0x40000000);
+
+        /* Always set the max size 512M */
+        SH5PCI_WRITE(MBMR, PCISH5_MEM_SIZCONV(512*1024*1024));
+
+        /*
+        ** I/O addresses are mapped at internal PCI specific address
+        ** as is described into the configuration bridge table.
+        ** These are changed to 0, to allow cards that have legacy
+        ** io such as vga to function correctly. We set the SH5 IOBAR to
+        ** 256K, which is a bit big as we can only have 64K of address space
+        */
+
+        SH5PCI_WRITE(IOBR,0x0);
+
+	pr_debug("PCI:Writing 0x%08x to IOBR\n",0);
+
+        /* Set up a 256K window. Totally pointless waste  of address space */
+        SH5PCI_WRITE(IOBMR,0);
+	pr_debug("PCI:Writing 0x%08x to IOBMR\n",0);
+
+	/* The SH5 has a HUGE 256K I/O region, which breaks the PCI spec. Ideally,
+         * we would want to map the I/O region somewhere, but it is so big this is not
+         * that easy!
+         */
+	SH5PCI_WRITE(CSR_IBAR0,~0);
+	/* Set memory size value */
+        memSize = memory_end - memory_start;
+
+        /* Now we set up the mbars so the PCI bus can see the memory of the machine */
+        if (memSize < (1024 * 1024)) {
+                printk(KERN_ERR "PCISH5: Ridiculous memory size of 0x%x?\n", memSize);
+                return -EINVAL;
+        }
+
+        /* Set LSR 0 */
+        lsr0 = (memSize > (512 * 1024 * 1024)) ? 0x1ff00001 : ((r2p2(memSize) - 0x100000) | 0x1);
+        SH5PCI_WRITE(LSR0, lsr0);
+
+	pr_debug("PCI:Writing 0x%08x to LSR0\n",lsr0);
+
+        /* Set MBAR 0 */
+        SH5PCI_WRITE(CSR_MBAR0, memory_start);
+        SH5PCI_WRITE(LAR0, memory_start);
+
+        SH5PCI_WRITE(CSR_MBAR1,0);
+        SH5PCI_WRITE(LAR1,0);
+        SH5PCI_WRITE(LSR1,0);
+
+	pr_debug("PCI:Writing 0x%08llx to CSR_MBAR0\n",memory_start);
+	pr_debug("PCI:Writing 0x%08llx to LAR0\n",memory_start);
+
+        /* Enable the PCI interrupts on the device */
+        SH5PCI_WRITE(INTM,  ~0);
+        SH5PCI_WRITE(AINTM, ~0);
+        SH5PCI_WRITE(PINTM, ~0);
+
+	pr_debug("Switching on all error interrupts\n");
+
+        return(0);
+}
+
+static int sh5pci_read(struct pci_bus *bus, unsigned int devfn, int where,
+			int size, u32 *val)
+{
+	SH5PCI_WRITE(PAR, CONFIG_CMD(bus, devfn, where));
+
+	switch (size) {
+		case 1:
+			*val = (u8)SH5PCI_READ_BYTE(PDR + (where & 3));
+			break;
+		case 2:
+			*val = (u16)SH5PCI_READ_SHORT(PDR + (where & 2));
+			break;
+		case 4:
+			*val = SH5PCI_READ(PDR);
+			break;
+	}
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static int sh5pci_write(struct pci_bus *bus, unsigned int devfn, int where,
+			 int size, u32 val)
+{
+	SH5PCI_WRITE(PAR, CONFIG_CMD(bus, devfn, where));
+
+	switch (size) {
+		case 1:
+			SH5PCI_WRITE_BYTE(PDR + (where & 3), (u8)val);
+			break;
+		case 2:
+			SH5PCI_WRITE_SHORT(PDR + (where & 2), (u16)val);
+			break;
+		case 4:
+			SH5PCI_WRITE(PDR, val);
+			break;
+	}
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static struct pci_ops pci_config_ops = {
+	.read =		sh5pci_read,
+	.write =	sh5pci_write,
+};
+
+/* Everything hangs off this */
+static struct pci_bus *pci_root_bus;
+
+
+static u8 __init no_swizzle(struct pci_dev *dev, u8 * pin)
+{
+	pr_debug("swizzle for dev %d on bus %d slot %d pin is %d\n",
+	         dev->devfn,dev->bus->number, PCI_SLOT(dev->devfn),*pin);
+	return PCI_SLOT(dev->devfn);
+}
+
+static inline u8 bridge_swizzle(u8 pin, u8 slot)
+{
+	return (((pin-1) + slot) % 4) + 1;
+}
+
+u8 __init common_swizzle(struct pci_dev *dev, u8 *pinp)
+{
+	if (dev->bus->number != 0) {
+		u8 pin = *pinp;
+		do {
+			pin = bridge_swizzle(pin, PCI_SLOT(dev->devfn));
+			/* Move up the chain of bridges. */
+			dev = dev->bus->self;
+		} while (dev->bus->self);
+		*pinp = pin;
+
+		/* The slot is the slot of the last bridge. */
+	}
+
+	return PCI_SLOT(dev->devfn);
+}
+
+/* This needs to be shunted out of here into the board specific bit */
+
+static int __init map_cayman_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+	int result = -1;
+
+	/* The complication here is that the PCI IRQ lines from the Cayman's 2
+	   5V slots get into the CPU via a different path from the IRQ lines
+	   from the 3 3.3V slots.  Thus, we have to detect whether the card's
+	   interrupts go via the 5V or 3.3V path, i.e. the 'bridge swizzling'
+	   at the point where we cross from 5V to 3.3V is not the normal case.
+
+	   The added complication is that we don't know that the 5V slots are
+	   always bus 2, because a card containing a PCI-PCI bridge may be
+	   plugged into a 3.3V slot, and this changes the bus numbering.
+
+	   Also, the Cayman has an intermediate PCI bus that goes a custom
+	   expansion board header (and to the secondary bridge).  This bus has
+	   never been used in practice.
+
+	   The 1ary onboard PCI-PCI bridge is device 3 on bus 0
+	   The 2ary onboard PCI-PCI bridge is device 0 on the 2ary bus of the 1ary bridge.
+	   */
+
+	struct slot_pin {
+		int slot;
+		int pin;
+	} path[4];
+	int i=0;
+
+	while (dev->bus->number > 0) {
+
+		slot = path[i].slot = PCI_SLOT(dev->devfn);
+		pin = path[i].pin = bridge_swizzle(pin, slot);
+		dev = dev->bus->self;
+		i++;
+		if (i > 3) panic("PCI path to root bus too long!\n");
+	}
+
+	slot = PCI_SLOT(dev->devfn);
+	/* This is the slot on bus 0 through which the device is eventually
+	   reachable. */
+
+	/* Now work back up. */
+	if ((slot < 3) || (i == 0)) {
+		/* Bus 0 (incl. PCI-PCI bridge itself) : perform the final
+		   swizzle now. */
+		result = IRQ_INTA + bridge_swizzle(pin, slot) - 1;
+	} else {
+		i--;
+		slot = path[i].slot;
+		pin  = path[i].pin;
+		if (slot > 0) {
+			panic("PCI expansion bus device found - not handled!\n");
+		} else {
+			if (i > 0) {
+				/* 5V slots */
+				i--;
+				slot = path[i].slot;
+				pin  = path[i].pin;
+				/* 'pin' was swizzled earlier wrt slot, don't do it again. */
+				result = IRQ_P2INTA + (pin - 1);
+			} else {
+				/* IRQ for 2ary PCI-PCI bridge : unused */
+				result = -1;
+			}
+		}
+	}
+
+	return result;
+}
+
+static irqreturn_t pcish5_err_irq(int irq, void *dev_id)
+{
+	struct pt_regs *regs = get_irq_regs();
+	unsigned pci_int, pci_air, pci_cir, pci_aint;
+
+	pci_int = SH5PCI_READ(INT);
+	pci_cir = SH5PCI_READ(CIR);
+	pci_air = SH5PCI_READ(AIR);
+
+	if (pci_int) {
+		printk("PCI INTERRUPT (at %08llx)!\n", regs->pc);
+		printk("PCI INT -> 0x%x\n", pci_int & 0xffff);
+		printk("PCI AIR -> 0x%x\n", pci_air);
+		printk("PCI CIR -> 0x%x\n", pci_cir);
+		SH5PCI_WRITE(INT, ~0);
+	}
+
+	pci_aint = SH5PCI_READ(AINT);
+	if (pci_aint) {
+		printk("PCI ARB INTERRUPT!\n");
+		printk("PCI AINT -> 0x%x\n", pci_aint);
+		printk("PCI AIR -> 0x%x\n", pci_air);
+		printk("PCI CIR -> 0x%x\n", pci_cir);
+		SH5PCI_WRITE(AINT, ~0);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t pcish5_serr_irq(int irq, void *dev_id)
+{
+	printk("SERR IRQ\n");
+
+	return IRQ_NONE;
+}
+
+static void __init
+pcibios_size_bridge(struct pci_bus *bus, struct resource *ior,
+		    struct resource *memr)
+{
+	struct resource io_res, mem_res;
+	struct pci_dev *dev;
+	struct pci_dev *bridge = bus->self;
+	struct list_head *ln;
+
+	if (!bridge)
+		return;	/* host bridge, nothing to do */
+
+	/* set reasonable default locations for pcibios_align_resource */
+	io_res.start = PCIBIOS_MIN_IO;
+	mem_res.start = PCIBIOS_MIN_MEM;
+
+	io_res.end = io_res.start;
+	mem_res.end = mem_res.start;
+
+	/* Collect information about how our direct children are layed out. */
+	for (ln=bus->devices.next; ln != &bus->devices; ln=ln->next) {
+		int i;
+		dev = pci_dev_b(ln);
+
+		/* Skip bridges for now */
+		if (dev->class >> 8 == PCI_CLASS_BRIDGE_PCI)
+			continue;
+
+		for (i = 0; i < PCI_NUM_RESOURCES; i++) {
+			struct resource res;
+			unsigned long size;
+
+			memcpy(&res, &dev->resource[i], sizeof(res));
+			size = res.end - res.start + 1;
+
+			if (res.flags & IORESOURCE_IO) {
+				res.start = io_res.end;
+				pcibios_align_resource(dev, &res, size, 0);
+				io_res.end = res.start + size;
+			} else if (res.flags & IORESOURCE_MEM) {
+				res.start = mem_res.end;
+				pcibios_align_resource(dev, &res, size, 0);
+				mem_res.end = res.start + size;
+			}
+		}
+	}
+
+	/* And for all of the subordinate busses. */
+	for (ln=bus->children.next; ln != &bus->children; ln=ln->next)
+		pcibios_size_bridge(pci_bus_b(ln), &io_res, &mem_res);
+
+	/* turn the ending locations into sizes (subtract start) */
+	io_res.end -= io_res.start;
+	mem_res.end -= mem_res.start;
+
+	/* Align the sizes up by bridge rules */
+	io_res.end = ALIGN(io_res.end, 4*1024) - 1;
+	mem_res.end = ALIGN(mem_res.end, 1*1024*1024) - 1;
+
+	/* Adjust the bridge's allocation requirements */
+	bridge->resource[0].end = bridge->resource[0].start + io_res.end;
+	bridge->resource[1].end = bridge->resource[1].start + mem_res.end;
+
+	bridge->resource[PCI_BRIDGE_RESOURCES].end =
+	    bridge->resource[PCI_BRIDGE_RESOURCES].start + io_res.end;
+	bridge->resource[PCI_BRIDGE_RESOURCES+1].end =
+	    bridge->resource[PCI_BRIDGE_RESOURCES+1].start + mem_res.end;
+
+	/* adjust parent's resource requirements */
+	if (ior) {
+		ior->end = ALIGN(ior->end, 4*1024);
+		ior->end += io_res.end;
+	}
+
+	if (memr) {
+		memr->end = ALIGN(memr->end, 1*1024*1024);
+		memr->end += mem_res.end;
+	}
+}
+
+static void __init pcibios_size_bridges(void)
+{
+	struct resource io_res, mem_res;
+
+	memset(&io_res, 0, sizeof(io_res));
+	memset(&mem_res, 0, sizeof(mem_res));
+
+	pcibios_size_bridge(pci_root_bus, &io_res, &mem_res);
+}
+
+static int __init pcibios_init(void)
+{
+        if (request_irq(IRQ_ERR, pcish5_err_irq,
+                        IRQF_DISABLED, "PCI Error",NULL) < 0) {
+                printk(KERN_ERR "PCISH5: Cannot hook PCI_PERR interrupt\n");
+                return -EINVAL;
+        }
+
+        if (request_irq(IRQ_SERR, pcish5_serr_irq,
+                        IRQF_DISABLED, "PCI SERR interrupt", NULL) < 0) {
+                printk(KERN_ERR "PCISH5: Cannot hook PCI_SERR interrupt\n");
+                return -EINVAL;
+        }
+
+	/* The pci subsystem needs to know where memory is and how much
+	 * of it there is. I've simply made these globals. A better mechanism
+	 * is probably needed.
+	 */
+	sh5pci_init(__pa(memory_start),
+		     __pa(memory_end) - __pa(memory_start));
+
+	pci_root_bus = pci_scan_bus(0, &pci_config_ops, NULL);
+	pcibios_size_bridges();
+	pci_assign_unassigned_resources();
+	pci_fixup_irqs(no_swizzle, map_cayman_irq);
+
+	return 0;
+}
+
+subsys_initcall(pcibios_init);
+
+void __devinit pcibios_fixup_bus(struct pci_bus *bus)
+{
+	struct pci_dev *dev = bus->self;
+	int i;
+
+#if 1
+	if(dev) {
+		for(i=0; i<3; i++) {
+			bus->resource[i] =
+				&dev->resource[PCI_BRIDGE_RESOURCES+i];
+			bus->resource[i]->name = bus->name;
+		}
+		bus->resource[0]->flags |= IORESOURCE_IO;
+		bus->resource[1]->flags |= IORESOURCE_MEM;
+
+		/* For now, propagate host limits to the bus;
+		 * we'll adjust them later. */
+
+#if 1
+		bus->resource[0]->end = 64*1024 - 1 ;
+		bus->resource[1]->end = PCIBIOS_MIN_MEM+(256*1024*1024)-1;
+		bus->resource[0]->start = PCIBIOS_MIN_IO;
+		bus->resource[1]->start = PCIBIOS_MIN_MEM;
+#else
+		bus->resource[0]->end = 0;
+		bus->resource[1]->end = 0;
+		bus->resource[0]->start =0;
+		bus->resource[1]->start = 0;
+#endif
+		/* Turn off downstream PF memory address range by default */
+		bus->resource[2]->start = 1024*1024;
+		bus->resource[2]->end = bus->resource[2]->start - 1;
+	}
+#endif
+
+}
+