diff options
author | Paul Mundt <lethal@linux-sh.org> | 2009-04-20 21:11:07 +0900 |
---|---|---|
committer | Paul Mundt <lethal@linux-sh.org> | 2009-04-20 21:11:07 +0900 |
commit | 757e3c16f8bafa2a470aebf9b04671c5d4d18f49 (patch) | |
tree | 45f28014d3980d917376f42159b19926816083e6 /arch/sh/drivers/pci/pci-sh7751.c | |
parent | a5b08047129f214af1899bd9088605c7adc21ed5 (diff) |
sh: pci: Rewrite SH7751 PCI support to follow SH7780.
This follows the similar sort of scheme that the refactored SH7780 code
uses, using a 64MB CS3 mapping to handle the window0 case, and simply
discarding window1. This vastly simplifies the code, and allows most of
the board-specific setup to go die.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Diffstat (limited to 'arch/sh/drivers/pci/pci-sh7751.c')
-rw-r--r-- | arch/sh/drivers/pci/pci-sh7751.c | 135 |
1 files changed, 70 insertions, 65 deletions
diff --git a/arch/sh/drivers/pci/pci-sh7751.c b/arch/sh/drivers/pci/pci-sh7751.c index 4c08fd7f665..c4fa0bb1397 100644 --- a/arch/sh/drivers/pci/pci-sh7751.c +++ b/arch/sh/drivers/pci/pci-sh7751.c @@ -1,78 +1,41 @@ /* - * Low-Level PCI Support for the SH7751 + * Low-Level PCI Support for the SH7751 * - * Dustin McIntire (dustin@sensoria.com) - * Derived from arch/i386/kernel/pci-*.c which bore the message: - * (c) 1999--2000 Martin Mares <mj@ucw.cz> + * Copyright (C) 2003 - 2009 Paul Mundt + * Copyright (C) 2001 Dustin McIntire * - * Ported to the new API by Paul Mundt <lethal@linux-sh.org> - * With cleanup by Paul van Gool <pvangool@mimotech.com> - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. + * With cleanup by Paul van Gool <pvangool@mimotech.com>, 2003. * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. */ -#undef DEBUG - #include <linux/init.h> #include <linux/pci.h> #include <linux/types.h> #include <linux/errno.h> -#include <linux/delay.h> +#include <linux/io.h> #include "pci-sh4.h" #include <asm/addrspace.h> -#include <asm/io.h> - -/* - * Initialization. Try all known PCI access methods. Note that we support - * using both PCI BIOS and direct access: in such cases, we use I/O ports - * to access config space. - * - * Note that the platform specific initialization (BSC registers, and memory - * space mapping) will be called via the platform defined function - * pcibios_init_platform(). - */ -int __init sh7751_pci_init(struct pci_channel *chan) -{ - unsigned int id; - int ret; - - pr_debug("PCI: Starting intialization.\n"); - - chan->reg_base = 0xfe200000; - - /* check for SH7751/SH7751R hardware */ - id = pci_read_reg(chan, SH7751_PCICONF0); - if (id != ((SH7751_DEVICE_ID << 16) | SH7751_VENDOR_ID) && - id != ((SH7751R_DEVICE_ID << 16) | SH7751_VENDOR_ID)) { - pr_debug("PCI: This is not an SH7751(R) (%x)\n", id); - return -ENODEV; - } - - if ((ret = sh4_pci_check_direct(chan)) != 0) - return ret; - - return pcibios_init_platform(); -} static int __init __area_sdram_check(struct pci_channel *chan, unsigned int area) { - u32 word; + unsigned long word; - word = ctrl_inl(SH7751_BCR1); + word = __raw_readl(SH7751_BCR1); /* check BCR for SDRAM in area */ if (((word >> area) & 1) == 0) { - printk("PCI: Area %d is not configured for SDRAM. BCR1=0x%x\n", + printk("PCI: Area %d is not configured for SDRAM. BCR1=0x%lx\n", area, word); return 0; } pci_write_reg(chan, word, SH4_PCIBCR1); - word = (u16)ctrl_inw(SH7751_BCR2); + word = __raw_readw(SH7751_BCR2); /* check BCR2 for 32bit SDRAM interface*/ if (((word >> (area << 1)) & 0x3) != 0x3) { - printk("PCI: Area %d is not 32 bit SDRAM. BCR2=0x%x\n", + printk("PCI: Area %d is not 32 bit SDRAM. BCR2=0x%lx\n", area, word); return 0; } @@ -81,11 +44,56 @@ static int __init __area_sdram_check(struct pci_channel *chan, return 1; } -int __init sh7751_pcic_init(struct pci_channel *chan, - struct sh4_pci_address_map *map) +static struct resource sh7751_io_resource = { + .name = "SH7751_IO", + .start = SH7751_PCI_IO_BASE, + .end = SH7751_PCI_IO_BASE + SH7751_PCI_IO_SIZE - 1, + .flags = IORESOURCE_IO +}; + +static struct resource sh7751_mem_resource = { + .name = "SH7785_mem", + .start = SH7751_PCI_MEMORY_BASE, + .end = SH7751_PCI_MEMORY_BASE + SH7751_PCI_MEM_SIZE - 1, + .flags = IORESOURCE_MEM +}; + +static struct pci_channel sh7751_pci_controller = { + .pci_ops = &sh4_pci_ops, + .mem_resource = &sh7751_mem_resource, + .mem_offset = 0x00000000, + .io_resource = &sh7751_io_resource, + .io_offset = 0x00000000, +}; + +static struct sh4_pci_address_map sh7751_pci_map = { + .window0 = { + .base = SH7751_CS3_BASE_ADDR, + .size = 0x04000000, + }, +}; + +static int __init sh7751_pci_init(void) { - u32 reg; - u32 word; + struct pci_channel *chan = &sh7751_pci_controller; + unsigned int id; + u32 word, reg; + int ret; + + printk(KERN_NOTICE "PCI: Starting intialization.\n"); + + chan->reg_base = 0xfe200000; + + /* check for SH7751/SH7751R hardware */ + id = pci_read_reg(chan, SH7751_PCICONF0); + if (id != ((SH7751_DEVICE_ID << 16) | SH7751_VENDOR_ID) && + id != ((SH7751R_DEVICE_ID << 16) | SH7751_VENDOR_ID)) { + pr_debug("PCI: This is not an SH7751(R) (%x)\n", id); + return -ENODEV; + } + + if ((ret = sh4_pci_check_direct(chan)) != 0) + return ret; /* Set the BCR's to enable PCI access */ reg = ctrl_inl(SH7751_BCR1); @@ -112,21 +120,13 @@ int __init sh7751_pcic_init(struct pci_channel *chan, /* Set IO and Mem windows to local address * Make PCI and local address the same for easy 1 to 1 mapping - * Window0 = map->window0.size @ non-cached area base = SDRAM - * Window1 = map->window1.size @ cached area base = SDRAM */ - word = map->window0.size - 1; + word = sh7751_pci_map.window0.size - 1; pci_write_reg(chan, word, SH4_PCILSR0); - word = map->window1.size - 1; - pci_write_reg(chan, word, SH4_PCILSR1); /* Set the values on window 0 PCI config registers */ - word = P2SEGADDR(map->window0.base); + word = P2SEGADDR(sh7751_pci_map.window0.base); pci_write_reg(chan, word, SH4_PCILAR0); pci_write_reg(chan, word, SH7751_PCICONF5); - /* Set the values on window 1 PCI config registers */ - word = PHYSADDR(map->window1.base); - pci_write_reg(chan, word, SH4_PCILAR1); - pci_write_reg(chan, word, SH7751_PCICONF6); /* Set the local 16MB PCI memory space window to * the lowest PCI mapped address @@ -144,7 +144,7 @@ int __init sh7751_pcic_init(struct pci_channel *chan, /* Set PCI WCRx, BCRx's, copy from BSC locations */ /* check BCR for SDRAM in specified area */ - switch (map->window0.base) { + switch (sh7751_pci_map.window0.base) { case SH7751_CS0_BASE_ADDR: word = __area_sdram_check(chan, 0); break; case SH7751_CS1_BASE_ADDR: word = __area_sdram_check(chan, 1); break; case SH7751_CS2_BASE_ADDR: word = __area_sdram_check(chan, 2); break; @@ -179,5 +179,10 @@ int __init sh7751_pcic_init(struct pci_channel *chan, word = SH4_PCICR_PREFIX | SH4_PCICR_CFIN | SH4_PCICR_ARBM; pci_write_reg(chan, word, SH4_PCICR); + __set_io_port_base(SH7751_PCI_IO_BASE); + + register_pci_controller(chan); + return 0; } +arch_initcall(sh7751_pci_init); |