Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (187 commits)
  sh: remove dead LED code for migo-r and ms7724se
  sh: ecovec build fix for CONFIG_I2C=n
  sh: ecovec r-standby support
  sh: ms7724se r-standby support
  sh: SH-Mobile R-standby register save/restore
  clocksource: Fix up a registration/IRQ race in the sh drivers.
  sh: ms7724: modify scan_timing for KEYSC
  sh: ms7724: Add sh_sir support
  sh: mach-ecovec24: Add sh_sir support
  sh: wire up SET/GET_UNALIGN_CTL.
  sh: allow alignment fault mode to be configured at kernel boot.
  sh: sh7724: Update FSI/SPU2 clock
  sh: always enable sh7724 vpu_clk and set to 166MHz on Ecovec
  sh: add sh7724 kick callback to clk_div4_table
  sh: introduce struct clk_div4_table
  sh: clock-cpg div4 set_rate() shift fix
  sh: Turn on speculative return for SH7785 and SH7786
  sh: Merge legacy and dynamic PMB modes.
  sh: Use uncached I/O helpers in PMB setup.
  sh: Provide uncached I/O helpers.
  ...

1 files changed, 7 insertions, 57 deletions

diff --git a/arch/sh/drivers/pci/pci-sh7780.h b/arch/sh/drivers/pci/pci-sh7780.h
index 4a52478c97c..205dcbefe27 100644
--- a/arch/sh/drivers/pci/pci-sh7780.h
+++ b/arch/sh/drivers/pci/pci-sh7780.h
@@ -12,12 +12,11 @@
 #ifndef _PCI_SH7780_H_
 #define _PCI_SH7780_H_
 
-/* Platform Specific Values */
-#define SH7780_VENDOR_ID	0x1912
-#define SH7781_DEVICE_ID	0x0001
-#define SH7780_DEVICE_ID	0x0002
-#define SH7763_DEVICE_ID	0x0004
-#define SH7785_DEVICE_ID	0x0007
+#define PCI_VENDOR_ID_RENESAS		0x1912
+#define PCI_DEVICE_ID_RENESAS_SH7781	0x0001
+#define PCI_DEVICE_ID_RENESAS_SH7780	0x0002
+#define PCI_DEVICE_ID_RENESAS_SH7763	0x0004
+#define PCI_DEVICE_ID_RENESAS_SH7785	0x0007
 
 /* SH7780 Control Registers */
 #define	PCIECR			0xFE000008
@@ -27,44 +26,9 @@
 #define SH7780_PCI_CONFIG_BASE	0xFD000000	/* Config space base addr */
 #define SH7780_PCI_CONFIG_SIZE	0x01000000	/* Config space size */
 
-#define SH7780_PCI_MEMORY_BASE	0xFD000000	/* Memory space base addr */
-#define SH7780_PCI_MEM_SIZE	0x01000000	/* Size of Memory window */
-
-#define SH7780_PCI_IO_BASE	0xFE200000	/* IO space base address */
-#define SH7780_PCI_IO_SIZE	0x00400000	/* Size of IO window */
-
 #define SH7780_PCIREG_BASE	0xFE040000	/* PCI regs base address */
 
 /* SH7780 PCI Config Registers */
-#define SH7780_PCIVID		0x000		/* Vendor ID */
-#define SH7780_PCIDID		0x002		/* Device ID */
-#define SH7780_PCICMD		0x004		/* Command */
-#define SH7780_PCISTATUS	0x006		/* Status */
-#define SH7780_PCIRID		0x008		/* Revision ID */
-#define SH7780_PCIPIF		0x009		/* Program Interface */
-#define SH7780_PCISUB		0x00a		/* Sub class code */
-#define SH7780_PCIBCC		0x00b		/* Base class code */
-#define SH7780_PCICLS		0x00c		/* Cache line size */
-#define SH7780_PCILTM		0x00d		/* latency timer */
-#define SH7780_PCIHDR		0x00e		/* Header type */
-#define SH7780_PCIBIST		0x00f		/* BIST */
-#define SH7780_PCIIBAR		0x010		/* IO Base address */
-#define SH7780_PCIMBAR0		0x014		/* Memory base address0 */
-#define SH7780_PCIMBAR1		0x018		/* Memory base address1 */
-#define SH7780_PCISVID		0x02c		/* Sub system vendor ID */
-#define SH7780_PCISID		0x02e		/* Sub system ID */
-#define SH7780_PCICP		0x034
-#define SH7780_PCIINTLINE	0x03c		/* Interrupt line */
-#define SH7780_PCIINTPIN	0x03d		/* Interrupt pin */
-#define SH7780_PCIMINGNT	0x03e		/* Minumum grand */
-#define SH7780_PCIMAXLAT	0x03f		/* Maxmum latency */
-#define SH7780_PCICID		0x040
-#define SH7780_PCINIP		0x041
-#define SH7780_PCIPMC		0x042
-#define SH7780_PCIPMCSR		0x044
-#define SH7780_PCIPMCSR_BSE	0x046
-#define SH7780_PCICDD		0x047
-
 #define SH7780_PCIIR		0x114		/* PCI Interrupt Register */
 #define SH7780_PCIIMR		0x118		/* PCI Interrupt Mask Register */
 #define SH7780_PCIAIR		0x11C		/* Error Address Register */
@@ -76,10 +40,8 @@
 #define SH7780_PCIPINT		0x1CC		/* Power Mgmnt Int. Register */
 #define SH7780_PCIPINTM		0x1D0		/* Power Mgmnt Mask Register */
 
-#define SH7780_PCIMBR0		0x1E0
-#define SH7780_PCIMBMR0		0x1E4
-#define SH7780_PCIMBR2		0x1F0
-#define SH7780_PCIMBMR2		0x1F4
+#define SH7780_PCIMBR(x)	(0x1E0 + ((x) * 8))
+#define SH7780_PCIMBMR(x)	(0x1E4 + ((x) * 8))
 #define SH7780_PCIIOBR		0x1F8
 #define SH7780_PCIIOBMR		0x1FC
 #define SH7780_PCICSCR0		0x210		/* Cache Snoop1 Cnt. Register */
@@ -87,16 +49,4 @@
 #define SH7780_PCICSAR0		0x218	/* Cache Snoop1 Addr. Register */
 #define SH7780_PCICSAR1		0x21C	/* Cache Snoop2 Addr. Register */
 
-/* General Memory Config Addresses */
-#define SH7780_CS0_BASE_ADDR	0x0
-#define SH7780_MEM_REGION_SIZE	0x04000000
-#define SH7780_CS1_BASE_ADDR	(SH7780_CS0_BASE_ADDR + SH7780_MEM_REGION_SIZE)
-#define SH7780_CS2_BASE_ADDR	(SH7780_CS1_BASE_ADDR + SH7780_MEM_REGION_SIZE)
-#define SH7780_CS3_BASE_ADDR	(SH7780_CS2_BASE_ADDR + SH7780_MEM_REGION_SIZE)
-#define SH7780_CS4_BASE_ADDR	(SH7780_CS3_BASE_ADDR + SH7780_MEM_REGION_SIZE)
-#define SH7780_CS5_BASE_ADDR	(SH7780_CS4_BASE_ADDR + SH7780_MEM_REGION_SIZE)
-#define SH7780_CS6_BASE_ADDR	(SH7780_CS5_BASE_ADDR + SH7780_MEM_REGION_SIZE)
-
-#define SH7780_32BIT_DDR_BASE_ADDR	0x40000000
-
 #endif /* _PCI_SH7780_H_ */