diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2010-02-26 16:54:27 -0800 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2010-02-26 16:54:27 -0800 |
| commit | 64d497f55379b1e320a08ec2426468d96f5642ec (patch) | |
| tree | 22b9ab3c5e69c5cc2728cbc2ca7fc7623beef8f1 /arch/sh/kernel/cpu/sh4a/setup-sh7786.c | |
| parent | 37d4008484977f60d5d37499a2670c79b214dd46 (diff) | |
| parent | b5f5fe80fa98a60daa0fa94512d1599b1e26674c (diff) | |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (187 commits)
sh: remove dead LED code for migo-r and ms7724se
sh: ecovec build fix for CONFIG_I2C=n
sh: ecovec r-standby support
sh: ms7724se r-standby support
sh: SH-Mobile R-standby register save/restore
clocksource: Fix up a registration/IRQ race in the sh drivers.
sh: ms7724: modify scan_timing for KEYSC
sh: ms7724: Add sh_sir support
sh: mach-ecovec24: Add sh_sir support
sh: wire up SET/GET_UNALIGN_CTL.
sh: allow alignment fault mode to be configured at kernel boot.
sh: sh7724: Update FSI/SPU2 clock
sh: always enable sh7724 vpu_clk and set to 166MHz on Ecovec
sh: add sh7724 kick callback to clk_div4_table
sh: introduce struct clk_div4_table
sh: clock-cpg div4 set_rate() shift fix
sh: Turn on speculative return for SH7785 and SH7786
sh: Merge legacy and dynamic PMB modes.
sh: Use uncached I/O helpers in PMB setup.
sh: Provide uncached I/O helpers.
...
Diffstat (limited to 'arch/sh/kernel/cpu/sh4a/setup-sh7786.c')
| -rw-r--r-- | arch/sh/kernel/cpu/sh4a/setup-sh7786.c | 24 |
1 files changed, 12 insertions, 12 deletions
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7786.c b/arch/sh/kernel/cpu/sh4a/setup-sh7786.c index 71673487ace..7e585320710 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7786.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7786.c @@ -867,14 +867,14 @@ static DECLARE_INTC_DESC(intc_desc_irl4567, "sh7786-irl4567", vectors_irl4567, void __init plat_irq_setup(void) { /* disable IRQ3-0 + IRQ7-4 */ - ctrl_outl(0xff000000, INTC_INTMSK0); + __raw_writel(0xff000000, INTC_INTMSK0); /* disable IRL3-0 + IRL7-4 */ - ctrl_outl(0xc0000000, INTC_INTMSK1); - ctrl_outl(0xfffefffe, INTC_INTMSK2); + __raw_writel(0xc0000000, INTC_INTMSK1); + __raw_writel(0xfffefffe, INTC_INTMSK2); /* select IRL mode for IRL3-0 + IRL7-4 */ - ctrl_outl(ctrl_inl(INTC_ICR0) & ~0x00c00000, INTC_ICR0); + __raw_writel(__raw_readl(INTC_ICR0) & ~0x00c00000, INTC_ICR0); register_intc_controller(&intc_desc); } @@ -884,32 +884,32 @@ void __init plat_irq_setup_pins(int mode) switch (mode) { case IRQ_MODE_IRQ7654: /* select IRQ mode for IRL7-4 */ - ctrl_outl(ctrl_inl(INTC_ICR0) | 0x00400000, INTC_ICR0); + __raw_writel(__raw_readl(INTC_ICR0) | 0x00400000, INTC_ICR0); register_intc_controller(&intc_desc_irq4567); break; case IRQ_MODE_IRQ3210: /* select IRQ mode for IRL3-0 */ - ctrl_outl(ctrl_inl(INTC_ICR0) | 0x00800000, INTC_ICR0); + __raw_writel(__raw_readl(INTC_ICR0) | 0x00800000, INTC_ICR0); register_intc_controller(&intc_desc_irq0123); break; case IRQ_MODE_IRL7654: /* enable IRL7-4 but don't provide any masking */ - ctrl_outl(0x40000000, INTC_INTMSKCLR1); - ctrl_outl(0x0000fffe, INTC_INTMSKCLR2); + __raw_writel(0x40000000, INTC_INTMSKCLR1); + __raw_writel(0x0000fffe, INTC_INTMSKCLR2); break; case IRQ_MODE_IRL3210: /* enable IRL0-3 but don't provide any masking */ - ctrl_outl(0x80000000, INTC_INTMSKCLR1); - ctrl_outl(0xfffe0000, INTC_INTMSKCLR2); + __raw_writel(0x80000000, INTC_INTMSKCLR1); + __raw_writel(0xfffe0000, INTC_INTMSKCLR2); break; case IRQ_MODE_IRL7654_MASK: /* enable IRL7-4 and mask using cpu intc controller */ - ctrl_outl(0x40000000, INTC_INTMSKCLR1); + __raw_writel(0x40000000, INTC_INTMSKCLR1); register_intc_controller(&intc_desc_irl4567); break; case IRQ_MODE_IRL3210_MASK: /* enable IRL0-3 and mask using cpu intc controller */ - ctrl_outl(0x80000000, INTC_INTMSKCLR1); + __raw_writel(0x80000000, INTC_INTMSKCLR1); register_intc_controller(&intc_desc_irl0123); break; default: |