Merge branch 'sh/urgent' into sh-fixes-for-linus

1 files changed, 5 insertions, 38 deletions

diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c
index 673530500e2..527a0cd956b 100644
--- a/arch/sh/boards/mach-se/7724/setup.c
+++ b/arch/sh/boards/mach-se/7724/setup.c
@@ -283,31 +283,6 @@ static struct platform_device ceu1_device = {
 };
 
 /* FSI */
-/*
- * FSI-A use external clock which came from ak464x.
- * So, we should change parent of fsi
- */
-#define FCLKACR		0xa4150008
-static void fsimck_init(struct clk *clk)
-{
-	u32 status = __raw_readl(clk->enable_reg);
-
-	/* use external clock */
-	status &= ~0x000000ff;
-	status |= 0x00000080;
-	__raw_writel(status, clk->enable_reg);
-}
-
-static struct clk_ops fsimck_clk_ops = {
-	.init = fsimck_init,
-};
-
-static struct clk fsimcka_clk = {
-	.ops		= &fsimck_clk_ops,
-	.enable_reg	= (void __iomem *)FCLKACR,
-	.rate		= 0, /* unknown */
-};
-
 /* change J20, J21, J22 pin to 1-2 connection to use slave mode */
 static struct sh_fsi_platform_info fsi_info = {
 	.porta_flags = SH_FSI_BRS_INV |
@@ -852,22 +827,14 @@ static int __init devices_setup(void)
 	gpio_request(GPIO_FN_KEYOUT0,     NULL);
 
 	/* enable FSI */
-	gpio_request(GPIO_FN_FSIMCKB,    NULL);
 	gpio_request(GPIO_FN_FSIMCKA,    NULL);
+	gpio_request(GPIO_FN_FSIIASD,    NULL);
 	gpio_request(GPIO_FN_FSIOASD,    NULL);
 	gpio_request(GPIO_FN_FSIIABCK,   NULL);
 	gpio_request(GPIO_FN_FSIIALRCK,  NULL);
 	gpio_request(GPIO_FN_FSIOABCK,   NULL);
 	gpio_request(GPIO_FN_FSIOALRCK,  NULL);
 	gpio_request(GPIO_FN_CLKAUDIOAO, NULL);
-	gpio_request(GPIO_FN_FSIIBSD,    NULL);
-	gpio_request(GPIO_FN_FSIOBSD,    NULL);
-	gpio_request(GPIO_FN_FSIIBBCK,   NULL);
-	gpio_request(GPIO_FN_FSIIBLRCK,  NULL);
-	gpio_request(GPIO_FN_FSIOBBCK,   NULL);
-	gpio_request(GPIO_FN_FSIOBLRCK,  NULL);
-	gpio_request(GPIO_FN_CLKAUDIOBO, NULL);
-	gpio_request(GPIO_FN_FSIIASD,    NULL);
 
 	/* set SPU2 clock to 83.4 MHz */
 	clk = clk_get(NULL, "spu_clk");
@@ -879,10 +846,10 @@ static int __init devices_setup(void)
 	/* change parent of FSI A */
 	clk = clk_get(NULL, "fsia_clk");
 	if (!IS_ERR(clk)) {
-		clk_register(&fsimcka_clk);
-		clk_set_parent(clk, &fsimcka_clk);
-		clk_set_rate(clk, 11000);
-		clk_set_rate(&fsimcka_clk, 11000);
+		/* 48kHz dummy clock was used to make sure 1/1 divide */
+		clk_set_rate(&sh7724_fsimcka_clk, 48000);
+		clk_set_parent(clk, &sh7724_fsimcka_clk);
+		clk_set_rate(clk, 48000);
 		clk_put(clk);
 	}