Merge branch 'master' into for-next

Pull linus#master to merge PER_CPU_DEF_ATTRIBUTES and alpha build fix
changes.  As alpha in percpu tree uses 'weak' attribute instead of
inline assembly, there's no need for __used attribute.

Conflicts:
	arch/alpha/include/asm/percpu.h
	arch/mn10300/kernel/vmlinux.lds.S
	include/linux/percpu-defs.h

17 files changed, 282 insertions, 83 deletions

diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index ac1c620d1c7..e2bdd7b94fd 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -15,7 +15,7 @@ config SUPERH
 	select HAVE_IOREMAP_PROT if MMU
 	select HAVE_ARCH_TRACEHOOK
 	select HAVE_DMA_API_DEBUG
-	select HAVE_PERF_COUNTER
+	select HAVE_PERF_COUNTERS
 	select RTC_LIB
 	select GENERIC_ATOMIC64
 	help
@@ -71,6 +71,9 @@ config GENERIC_HARDIRQS_NO__DO_IRQ
 config GENERIC_IRQ_PROBE
 	def_bool y
 
+config IRQ_PER_CPU
+	def_bool y
+
 config GENERIC_GPIO
 	def_bool n
 
@@ -151,6 +154,9 @@ config ARCH_NO_VIRT_TO_BUS
 config ARCH_HAS_DEFAULT_IDLE
 	def_bool y
 
+config ARCH_HAS_CPU_IDLE_WAIT
+	def_bool y
+
 config IO_TRAPPED
 	bool
 
@@ -411,6 +417,8 @@ config CPU_SUBTYPE_SH7786
 	select CPU_HAS_PTEAEX
 	select ARCH_SPARSEMEM_ENABLE
 	select SYS_SUPPORTS_NUMA
+	select SYS_SUPPORTS_SMP
+	select GENERIC_CLOCKEVENTS_BROADCAST if SMP
 
 config CPU_SUBTYPE_SHX3
 	bool "Support SH-X3 processor"
@@ -648,7 +656,7 @@ config NR_CPUS
 	int "Maximum number of CPUs (2-32)"
 	range 2 32
 	depends on SMP
-	default "4" if CPU_SHX3
+	default "4" if CPU_SUBTYPE_SHX3
 	default "2"
 	help
 	  This allows you to specify the maximum number of CPUs which this
diff --git a/arch/sh/Kconfig.debug b/arch/sh/Kconfig.debug
index 8ece0b5bd02..39224b57c6e 100644
--- a/arch/sh/Kconfig.debug
+++ b/arch/sh/Kconfig.debug
@@ -61,10 +61,6 @@ config EARLY_PRINTK
 	  select both the EARLY_SCIF_CONSOLE and SH_STANDARD_BIOS, using
 	  the kernel command line option to toggle back and forth.
 
-config DEBUG_BOOTMEM
-	depends on DEBUG_KERNEL
-	bool "Debug BOOTMEM initialization"
-
 config DEBUG_STACKOVERFLOW
 	bool "Check for stack overflows"
 	depends on DEBUG_KERNEL && SUPERH32
diff --git a/arch/sh/boards/mach-se/7206/io.c b/arch/sh/boards/mach-se/7206/io.c
index 9c3a33210d6..180455642a4 100644
--- a/arch/sh/boards/mach-se/7206/io.c
+++ b/arch/sh/boards/mach-se/7206/io.c
@@ -50,7 +50,7 @@ unsigned char se7206_inb_p(unsigned long port)
 
 unsigned short se7206_inw(unsigned long port)
 {
-	return *port2adr(port);;
+	return *port2adr(port);
 }
 
 void se7206_outb(unsigned char value, unsigned long port)
diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c
index 9cd04bd558b..c050a8d76df 100644
--- a/arch/sh/boards/mach-se/7724/setup.c
+++ b/arch/sh/boards/mach-se/7724/setup.c
@@ -23,6 +23,8 @@
 #include <media/sh_mobile_ceu.h>
 #include <asm/io.h>
 #include <asm/heartbeat.h>
+#include <asm/sh_eth.h>
+#include <asm/clock.h>
 #include <asm/sh_keysc.h>
 #include <cpu/sh7724.h>
 #include <mach-se/mach/se7724.h>
@@ -272,6 +274,34 @@ static struct platform_device keysc_device = {
 	},
 };
 
+/* SH Eth */
+static struct resource sh_eth_resources[] = {
+	[0] = {
+		.start = SH_ETH_ADDR,
+		.end   = SH_ETH_ADDR + 0x1FC,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = 91,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+	},
+};
+
+struct sh_eth_plat_data sh_eth_plat = {
+	.phy = 0x1f, /* SMSC LAN8187 */
+	.edmac_endian = EDMAC_LITTLE_ENDIAN,
+};
+
+static struct platform_device sh_eth_device = {
+	.name = "sh-eth",
+	.id	= 0,
+	.dev = {
+		.platform_data = &sh_eth_plat,
+	},
+	.num_resources = ARRAY_SIZE(sh_eth_resources),
+	.resource = sh_eth_resources,
+};
+
 static struct platform_device *ms7724se_devices[] __initdata = {
 	&heartbeat_device,
 	&smc91x_eth_device,
@@ -280,8 +310,57 @@ static struct platform_device *ms7724se_devices[] __initdata = {
 	&ceu0_device,
 	&ceu1_device,
 	&keysc_device,
+	&sh_eth_device,
 };
 
+#define EEPROM_OP   0xBA206000
+#define EEPROM_ADR  0xBA206004
+#define EEPROM_DATA 0xBA20600C
+#define EEPROM_STAT 0xBA206010
+#define EEPROM_STRT 0xBA206014
+static int __init sh_eth_is_eeprom_ready(void)
+{
+	int t = 10000;
+
+	while (t--) {
+		if (!ctrl_inw(EEPROM_STAT))
+			return 1;
+		cpu_relax();
+	}
+
+	printk(KERN_ERR "ms7724se can not access to eeprom\n");
+	return 0;
+}
+
+static void __init sh_eth_init(void)
+{
+	int i;
+	u16 mac[3];
+
+	/* check EEPROM status */
+	if (!sh_eth_is_eeprom_ready())
+		return;
+
+	/* read MAC addr from EEPROM */
+	for (i = 0 ; i < 3 ; i++) {
+		ctrl_outw(0x0, EEPROM_OP); /* read */
+		ctrl_outw(i*2, EEPROM_ADR);
+		ctrl_outw(0x1, EEPROM_STRT);
+		if (!sh_eth_is_eeprom_ready())
+			return;
+
+		mac[i] = ctrl_inw(EEPROM_DATA);
+		mac[i] = ((mac[i] & 0xFF) << 8) | (mac[i] >> 8); /* swap */
+	}
+
+	/* reset sh-eth */
+	ctrl_outl(0x1, SH_ETH_ADDR + 0x0);
+
+	/* set MAC addr */
+	ctrl_outl(((mac[0] << 16) | (mac[1])), SH_ETH_MAHR);
+	ctrl_outl((mac[2]), SH_ETH_MALR);
+}
+
 #define SW4140    0xBA201000
 #define FPGA_OUT  0xBA200400
 #define PORT_HIZA 0xA4050158
@@ -302,7 +381,8 @@ static int __init devices_setup(void)
 	ctrl_outw(ctrl_inw(FPGA_OUT) &
 		  ~((1 << 1)  | /* LAN */
 		    (1 << 6)  | /* VIDEO DAC */
-		    (1 << 12)), /* USB0 */
+		    (1 << 12) | /* USB0 */
+		    (1 << 14)), /* RMII */
 		  FPGA_OUT);
 
 	/* enable IRQ 0,1,2 */
@@ -374,7 +454,7 @@ static int __init devices_setup(void)
 	gpio_request(GPIO_FN_VIO0_CLK, NULL);
 	gpio_request(GPIO_FN_VIO0_FLD, NULL);
 	gpio_request(GPIO_FN_VIO0_HD,  NULL);
-	platform_resource_setup_memory(&ceu0_device, "ceu", 4 << 20);
+	platform_resource_setup_memory(&ceu0_device, "ceu0", 4 << 20);
 
 	/* enable CEU1 */
 	gpio_request(GPIO_FN_VIO1_D7,  NULL);
@@ -389,7 +469,7 @@ static int __init devices_setup(void)
 	gpio_request(GPIO_FN_VIO1_HD,  NULL);
 	gpio_request(GPIO_FN_VIO1_VD,  NULL);
 	gpio_request(GPIO_FN_VIO1_CLK, NULL);
-	platform_resource_setup_memory(&ceu1_device, "ceu", 4 << 20);
+	platform_resource_setup_memory(&ceu1_device, "ceu1", 4 << 20);
 
 	/* KEYSC */
 	gpio_request(GPIO_FN_KEYOUT5_IN5, NULL);
@@ -404,6 +484,28 @@ static int __init devices_setup(void)
 	gpio_request(GPIO_FN_KEYOUT1,     NULL);
 	gpio_request(GPIO_FN_KEYOUT0,     NULL);
 
+	/*
+	 * enable SH-Eth
+	 *
+	 * please remove J33 pin from your board !!
+	 *
+	 * ms7724 board should not use GPIO_FN_LNKSTA pin
+	 * So, This time PTX5 is set to input pin
+	 */
+	gpio_request(GPIO_FN_RMII_RXD0,    NULL);
+	gpio_request(GPIO_FN_RMII_RXD1,    NULL);
+	gpio_request(GPIO_FN_RMII_TXD0,    NULL);
+	gpio_request(GPIO_FN_RMII_TXD1,    NULL);
+	gpio_request(GPIO_FN_RMII_REF_CLK, NULL);
+	gpio_request(GPIO_FN_RMII_TX_EN,   NULL);
+	gpio_request(GPIO_FN_RMII_RX_ER,   NULL);
+	gpio_request(GPIO_FN_RMII_CRS_DV,  NULL);
+	gpio_request(GPIO_FN_MDIO,         NULL);
+	gpio_request(GPIO_FN_MDC,          NULL);
+	gpio_request(GPIO_PTX5, NULL);
+	gpio_direction_input(GPIO_PTX5);
+	sh_eth_init();
+
 	if (sw & SW41_B) {
 		/* SVGA */
 		lcdc_info.ch[0].lcd_cfg.xres         = 800;
@@ -437,7 +539,7 @@ static int __init devices_setup(void)
 	}
 
 	return platform_add_devices(ms7724se_devices,
-				ARRAY_SIZE(ms7724se_devices));
+				    ARRAY_SIZE(ms7724se_devices));
 }
 device_initcall(devices_setup);
 
diff --git a/arch/sh/configs/migor_defconfig b/arch/sh/configs/migor_defconfig
index da627d22c00..b18cfd39cac 100644
--- a/arch/sh/configs/migor_defconfig
+++ b/arch/sh/configs/migor_defconfig
@@ -309,7 +309,7 @@ CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="console=ttySC0,115200 earlyprintk=serial ip=on root=/dev/nfs ip=dhcp"
+CONFIG_CMDLINE="console=tty0 console=ttySC0,115200 earlyprintk=serial ip=on root=/dev/nfs ip=dhcp"
 
 #
 # Bus options
@@ -858,7 +858,35 @@ CONFIG_VIDEO_SH_MOBILE_CEU=y
 #
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+CONFIG_FB_SYS_FILLRECT=y
+CONFIG_FB_SYS_COPYAREA=y
+CONFIG_FB_SYS_IMAGEBLIT=y
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+CONFIG_FB_SYS_FOPS=y
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_SH_MOBILE_LCDC=y
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -870,6 +898,27 @@ CONFIG_VIDEO_SH_MOBILE_CEU=y
 # Console display driver support
 #
 CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+# CONFIG_FONT_8x8 is not set
+# CONFIG_FONT_8x16 is not set
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+CONFIG_FONT_MINI_4x6=y
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+# CONFIG_LOGO_LINUX_CLUT224 is not set
+# CONFIG_LOGO_SUPERH_MONO is not set
+CONFIG_LOGO_SUPERH_VGA16=y
+# CONFIG_LOGO_SUPERH_CLUT224 is not set
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
diff --git a/arch/sh/configs/se7724_defconfig b/arch/sh/configs/se7724_defconfig
index 3840270283e..3ee783a0a07 100644
--- a/arch/sh/configs/se7724_defconfig
+++ b/arch/sh/configs/se7724_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
 # Linux kernel version: 2.6.30
-# Thu Jun 18 16:09:05 2009
+# Mon Jun 29 16:28:43 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -14,6 +14,7 @@ CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -28,7 +29,9 @@ CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -88,10 +91,12 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
 
 #
 # Performance Counters
 #
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 # CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
@@ -107,6 +112,10 @@ CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -119,7 +128,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -584,7 +593,6 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_LIBFC is not set
 # CONFIG_LIBFCOE is not set
 # CONFIG_SCSI_DEBUG is not set
@@ -624,7 +632,7 @@ CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_AX88796 is not set
 # CONFIG_STNIC is not set
-# CONFIG_SH_ETH is not set
+CONFIG_SH_ETH=y
 CONFIG_SMC91X=y
 # CONFIG_ENC28J60 is not set
 # CONFIG_ETHOC is not set
@@ -801,6 +809,11 @@ CONFIG_SPI_BITBANG=y
 #
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
 # CONFIG_GPIO_SYSFS is not set
@@ -851,6 +864,8 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
 # CONFIG_REGULATOR is not set
 CONFIG_MEDIA_SUPPORT=y
 
@@ -1196,6 +1211,7 @@ CONFIG_RTC_DRV_PCF8563=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1260,6 +1276,7 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
 CONFIG_FILE_LOCKING=y
diff --git a/arch/sh/include/asm/dma-mapping.h b/arch/sh/include/asm/dma-mapping.h
index ea9d4f41c9d..69d56dd4c96 100644
--- a/arch/sh/include/asm/dma-mapping.h
+++ b/arch/sh/include/asm/dma-mapping.h
@@ -97,7 +97,7 @@ static inline void dma_unmap_page(struct device *dev, dma_addr_t dma_address,
 	dma_unmap_single(dev, dma_address, size, dir);
 }
 
-static inline void dma_sync_single(struct device *dev, dma_addr_t dma_handle,
+static inline void __dma_sync_single(struct device *dev, dma_addr_t dma_handle,
 				   size_t size, enum dma_data_direction dir)
 {
 #if defined(CONFIG_PCI) && !defined(CONFIG_SH_PCIDMA_NONCOHERENT)
@@ -119,7 +119,7 @@ static inline void dma_sync_single_range(struct device *dev,
 	dma_cache_sync(dev, phys_to_virt(dma_handle) + offset, size, dir);
 }
 
-static inline void dma_sync_sg(struct device *dev, struct scatterlist *sg,
+static inline void __dma_sync_sg(struct device *dev, struct scatterlist *sg,
 			       int nelems, enum dma_data_direction dir)
 {
 	int i;
@@ -137,7 +137,7 @@ static inline void dma_sync_single_for_cpu(struct device *dev,
 					   dma_addr_t dma_handle, size_t size,
 					   enum dma_data_direction dir)
 {
-	dma_sync_single(dev, dma_handle, size, dir);
+	__dma_sync_single(dev, dma_handle, size, dir);
 	debug_dma_sync_single_for_cpu(dev, dma_handle, size, dir);
 }
 
@@ -146,7 +146,7 @@ static inline void dma_sync_single_for_device(struct device *dev,
 					      size_t size,
 					      enum dma_data_direction dir)
 {
-	dma_sync_single(dev, dma_handle, size, dir);
+	__dma_sync_single(dev, dma_handle, size, dir);
 	debug_dma_sync_single_for_device(dev, dma_handle, size, dir);
 }
 
@@ -177,7 +177,7 @@ static inline void dma_sync_sg_for_cpu(struct device *dev,
 				       struct scatterlist *sg, int nelems,
 				       enum dma_data_direction dir)
 {
-	dma_sync_sg(dev, sg, nelems, dir);
+	__dma_sync_sg(dev, sg, nelems, dir);
 	debug_dma_sync_sg_for_cpu(dev, sg, nelems, dir);
 }
 
@@ -185,7 +185,7 @@ static inline void dma_sync_sg_for_device(struct device *dev,
 					  struct scatterlist *sg, int nelems,
 					  enum dma_data_direction dir)
 {
-	dma_sync_sg(dev, sg, nelems, dir);
+	__dma_sync_sg(dev, sg, nelems, dir);
 	debug_dma_sync_sg_for_device(dev, sg, nelems, dir);
 }
 
diff --git a/arch/sh/include/asm/perf_counter.h b/arch/sh/include/asm/perf_counter.h
index a8153c2aa6f..61c2b40c802 100644
--- a/arch/sh/include/asm/perf_counter.h
+++ b/arch/sh/include/asm/perf_counter.h
@@ -2,6 +2,6 @@
 #define __ASM_SH_PERF_COUNTER_H
 
 /* SH only supports software counters through this interface. */
-#define set_perf_counter_pending()	do { } while (0)
+static inline void set_perf_counter_pending(void) {}
 
 #endif /* __ASM_SH_PERF_COUNTER_H */
diff --git a/arch/sh/include/asm/syscall_32.h b/arch/sh/include/asm/syscall_32.h
index 5bc34681d99..6f83f2cc45c 100644
--- a/arch/sh/include/asm/syscall_32.h
+++ b/arch/sh/include/asm/syscall_32.h
@@ -3,6 +3,7 @@
 
 #include <linux/kernel.h>
 #include <linux/sched.h>
+#include <linux/err.h>
 #include <asm/ptrace.h>
 
 /* The system call number is given by the user in R3 */
diff --git a/arch/sh/include/asm/system.h b/arch/sh/include/asm/system.h
index a88895e6dcb..ab79e1f4fbe 100644
--- a/arch/sh/include/asm/system.h
+++ b/arch/sh/include/asm/system.h
@@ -154,6 +154,7 @@ extern struct dentry *sh_debugfs_root;
 
 void per_cpu_trap_init(void);
 void default_idle(void);
+void cpu_idle_wait(void);
 
 asmlinkage void break_point_trap(void);
 
diff --git a/arch/sh/include/mach-se/mach/se7724.h b/arch/sh/include/mach-se/mach/se7724.h
index 74164b60d0d..29514a39d0f 100644
--- a/arch/sh/include/mach-se/mach/se7724.h
+++ b/arch/sh/include/mach-se/mach/se7724.h
@@ -20,6 +20,11 @@
  */
 #include <asm/addrspace.h>
 
+/* SH Eth */
+#define SH_ETH_ADDR	(0xA4600000)
+#define SH_ETH_MAHR	(SH_ETH_ADDR + 0x1C0)
+#define SH_ETH_MALR	(SH_ETH_ADDR + 0x1C8)
+
 #define PA_LED		(0xba203000)	/* 8bit LED */
 #define IRQ_MODE	(0xba200010)
 #define IRQ0_SR		(0xba200014)
diff --git a/arch/sh/kernel/cpu/sh4a/Makefile b/arch/sh/kernel/cpu/sh4a/Makefile
index 96ea09ca8cc..ebdd391d5f4 100644
--- a/arch/sh/kernel/cpu/sh4a/Makefile
+++ b/arch/sh/kernel/cpu/sh4a/Makefile
@@ -16,7 +16,7 @@ obj-$(CONFIG_CPU_SUBTYPE_SH7366)	+= setup-sh7366.o
 obj-$(CONFIG_CPU_SUBTYPE_SHX3)		+= setup-shx3.o
 
 # SMP setup
-smp-$(CONFIG_CPU_SUBTYPE_SHX3)		:= smp-shx3.o
+smp-$(CONFIG_CPU_SHX3)			:= smp-shx3.o
 
 # Primary on-chip clocks (common)
 clock-$(CONFIG_CPU_SUBTYPE_SH7763)	:= clock-sh7763.o
@@ -38,6 +38,6 @@ pinmux-$(CONFIG_CPU_SUBTYPE_SH7724)	:= pinmux-sh7724.o
 pinmux-$(CONFIG_CPU_SUBTYPE_SH7785)	:= pinmux-sh7785.o
 pinmux-$(CONFIG_CPU_SUBTYPE_SH7786)	:= pinmux-sh7786.o
 
-obj-y			+= $(clock-y)
-obj-$(CONFIG_SMP)	+= $(smp-y)
+obj-y				+= $(clock-y)
+obj-$(CONFIG_SMP)		+= $(smp-y)
 obj-$(CONFIG_GENERIC_GPIO)	+= $(pinmux-y)
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7786.c b/arch/sh/kernel/cpu/sh4a/setup-sh7786.c
index 93e0d2c017e..b70049470a0 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7786.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7786.c
@@ -595,9 +595,8 @@ enum {
 	HSPI,
 	GPIO0, GPIO1,
 	Thermal,
-	INTC0, INTC1, INTC2, INTC3, INTC4, INTC5, INTC6, INTC7,
-
-	/* interrupt groups */
+	INTICI0, INTICI1, INTICI2, INTICI3,
+	INTICI4, INTICI5, INTICI6, INTICI7,
 };
 
 static struct intc_vect vectors[] __initdata = {
@@ -638,10 +637,12 @@ static struct intc_vect vectors[] __initdata = {
 	INTC_VECT(HSPI, 0xe80),
 	INTC_VECT(GPIO0, 0xea0), INTC_VECT(GPIO1, 0xec0),
 	INTC_VECT(Thermal, 0xee0),
+	INTC_VECT(INTICI0, 0xf00), INTC_VECT(INTICI1, 0xf20),
+	INTC_VECT(INTICI2, 0xf40), INTC_VECT(INTICI3, 0xf60),
+	INTC_VECT(INTICI4, 0xf80), INTC_VECT(INTICI5, 0xfa0),
+	INTC_VECT(INTICI6, 0xfc0), INTC_VECT(INTICI7, 0xfe0),
 };
 
-/* FIXME: Main CPU support only now */
-#if 1 /* Main CPU */
 #define CnINTMSK0	0xfe410030
 #define CnINTMSK1	0xfe410040
 #define CnINTMSKCLR0	0xfe410050
@@ -654,21 +655,6 @@ static struct intc_vect vectors[] __initdata = {
 #define CnINT2MSKCR1	0xfe410a34
 #define CnINT2MSKCR2	0xfe410a38
 #define CnINT2MSKCR3	0xfe410a3c
-#else /* Sub CPU */
-#define CnINTMSK0	0xfe410034
-#define CnINTMSK1	0xfe410044
-#define CnINTMSKCLR0	0xfe410054
-#define CnINTMSKCLR1	0xfe410064
-#define CnINT2MSKR0	0xfe410b20
-#define CnINT2MSKR1	0xfe410b24
-#define CnINT2MSKR2	0xfe410b28
-#define CnINT2MSKR3	0xfe410b2c
-#define CnINT2MSKCR0	0xfe410b30
-#define CnINT2MSKCR1	0xfe410b34
-#define CnINT2MSKCR2	0xfe410b38
-#define CnINT2MSKCR3	0xfe410b3c
-#endif
-
 #define INTMSK2		0xfe410068
 #define INTMSKCLR2	0xfe41006c
 
@@ -753,6 +739,9 @@ static struct intc_prio_reg prio_registers[] __initdata = {
 						  GPIO1, Thermal } },
 	{ 0xfe41085c, 0, 32, 8, /* INT2PRI23 */ { 0, 0, 0, 0 } },
 	{ 0xfe410860, 0, 32, 8, /* INT2PRI24 */ { 0, 0, 0, 0 } },
+	{ 0xfe410090, 0xfe4100a0, 32, 4, /* CnICIPRI / CnICIPRICLR */
+	  { INTICI7, INTICI6, INTICI5, INTICI4,
+	    INTICI3, INTICI2, INTICI1, INTICI0 }, INTC_SMP(4, 2) },
 };
 
 static DECLARE_INTC_DESC(intc_desc, "sh7786", vectors, NULL,
diff --git a/arch/sh/kernel/idle.c b/arch/sh/kernel/idle.c
index f35ed034885..27ff2dc093c 100644
--- a/arch/sh/kernel/idle.c
+++ b/arch/sh/kernel/idle.c
@@ -1,7 +1,7 @@
 /*
  * The idle loop for all SuperH platforms.
  *
- *  Copyright (C) 2002 - 2008  Paul Mundt
+ *  Copyright (C) 2002 - 2009  Paul Mundt
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
@@ -15,6 +15,7 @@
 #include <linux/preempt.h>
 #include <linux/thread_info.h>
 #include <linux/irqflags.h>
+#include <linux/smp.h>
 #include <asm/pgalloc.h>
 #include <asm/system.h>
 #include <asm/atomic.h>
@@ -79,3 +80,23 @@ void cpu_idle(void)
 		check_pgt_cache();
 	}
 }
+
+static void do_nothing(void *unused)
+{
+}
+
+/*
+ * cpu_idle_wait - Used to ensure that all the CPUs discard old value of
+ * pm_idle and update to new pm_idle value. Required while changing pm_idle
+ * handler on SMP systems.
+ *
+ * Caller must have changed pm_idle to the new value before the call. Old
+ * pm_idle value will not be used by any CPU after the return of this function.
+ */
+void cpu_idle_wait(void)
+{
+	smp_mb();
+	/* kick all the CPUs so that they exit out of pm_idle */
+	smp_call_function(do_nothing, NULL, 1);
+}
+EXPORT_SYMBOL_GPL(cpu_idle_wait);
diff --git a/arch/sh/mm/fault_32.c b/arch/sh/mm/fault_32.c
index cc8ddbdf3d7..71925946f1e 100644
--- a/arch/sh/mm/fault_32.c
+++ b/arch/sh/mm/fault_32.c
@@ -15,12 +15,28 @@
 #include <linux/mm.h>
 #include <linux/hardirq.h>
 #include <linux/kprobes.h>
-#include <linux/marker.h>
+#include <linux/perf_counter.h>
 #include <asm/io_trapped.h>
 #include <asm/system.h>
 #include <asm/mmu_context.h>
 #include <asm/tlbflush.h>
 
+static inline int notify_page_fault(struct pt_regs *regs, int trap)
+{
+	int ret = 0;
+
+#ifdef CONFIG_KPROBES
+	if (!user_mode(regs)) {
+		preempt_disable();
+		if (kprobe_running() && kprobe_fault_handler(regs, trap))
+			ret = 1;
+		preempt_enable();
+	}
+#endif
+
+	return ret;
+}
+
 /*
  * This routine handles page faults.  It determines the address,
  * and the problem, and then passes it off to one of the appropriate
@@ -87,13 +103,16 @@ asmlinkage void __kprobes do_page_fault(struct pt_regs *regs,
 		return;
 	}
 
+	mm = tsk->mm;
+
+	if (unlikely(notify_page_fault(regs, lookup_exception_vector())))
+		return;
+
 	/* Only enable interrupts if they were on before the fault */
-	if ((regs->sr & SR_IMASK) != SR_IMASK) {
-		trace_hardirqs_on();
+	if ((regs->sr & SR_IMASK) != SR_IMASK)
 		local_irq_enable();
-	}
 
-	mm = tsk->mm;
+	perf_swcounter_event(PERF_COUNT_SW_PAGE_FAULTS, 1, 0, regs, address);
 
 	/*
 	 * If we're in an interrupt or have no user
@@ -141,10 +160,15 @@ survive:
 			goto do_sigbus;
 		BUG();
 	}
-	if (fault & VM_FAULT_MAJOR)
+	if (fault & VM_FAULT_MAJOR) {
 		tsk->maj_flt++;
-	else
+		perf_swcounter_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1, 0,
+				     regs, address);
+	} else {
 		tsk->min_flt++;
+		perf_swcounter_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, 1, 0,
+				     regs, address);
+	}
 
 	up_read(&mm->mmap_sem);
 	return;
@@ -245,22 +269,6 @@ do_sigbus:
 		goto no_context;
 }
 
-static inline int notify_page_fault(struct pt_regs *regs, int trap)
-{
-	int ret = 0;
-
-#ifdef CONFIG_KPROBES
-	if (!user_mode(regs)) {
-		preempt_disable();
-		if (kprobe_running() && kprobe_fault_handler(regs, trap))
-			ret = 1;
-		preempt_enable();
-	}
-#endif
-
-	return ret;
-}
-
 /*
  * Called with interrupts disabled.
  */
@@ -273,12 +281,7 @@ asmlinkage int __kprobes __do_page_fault(struct pt_regs *regs,
 	pmd_t *pmd;
 	pte_t *pte;
 	pte_t entry;
-	int ret = 0;
-
-	if (notify_page_fault(regs, lookup_exception_vector()))
-		goto out;
-
-	ret = 1;
+	int ret = 1;
 
 	/*
 	 * We don't take page faults for P1, P2, and parts of P4, these
diff --git a/arch/sh/mm/init.c b/arch/sh/mm/init.c
index ee8e6bbe882..fe532aeaa16 100644
--- a/arch/sh/mm/init.c
+++ b/arch/sh/mm/init.c
@@ -70,7 +70,7 @@ static void set_pte_phys(unsigned long addr, unsigned long phys, pgprot_t prot)
 	}
 
 	set_pte(pte, pfn_pte(phys >> PAGE_SHIFT, prot));
-	flush_tlb_one(get_asid(), addr);
+	local_flush_tlb_one(get_asid(), addr);
 }
 
 /*
@@ -177,10 +177,8 @@ void __init paging_init(void)
 
 	free_area_init_nodes(max_zone_pfns);
 
-#ifdef CONFIG_SUPERH32
 	/* Set up the uncached fixmap */
 	set_fixmap_nocache(FIX_UNCACHED, __pa(&__uncached_start));
-#endif
 }
 
 static struct kcore_list kcore_mem, kcore_vmalloc;
diff --git a/arch/sh/mm/tlbflush_64.c b/arch/sh/mm/tlbflush_64.c
index fcbb6e135ce..3ce40ea3482 100644
--- a/arch/sh/mm/tlbflush_64.c
+++ b/arch/sh/mm/tlbflush_64.c
@@ -3,7 +3,7 @@
  *
  * Copyright (C) 2000, 2001  Paolo Alberelli
  * Copyright (C) 2003  Richard Curnow (/proc/tlb, bug fixes)
- * Copyright (C) 2003  Paul Mundt
+ * Copyright (C) 2003 - 2009 Paul Mundt
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
@@ -20,6 +20,7 @@
 #include <linux/mman.h>
 #include <linux/mm.h>
 #include <linux/smp.h>
+#include <linux/perf_counter.h>
 #include <linux/interrupt.h>
 #include <asm/system.h>
 #include <asm/io.h>
@@ -115,6 +116,8 @@ asmlinkage void do_page_fault(struct pt_regs *regs, unsigned long writeaccess,
 	/* Not an IO address, so reenable interrupts */
 	local_irq_enable();
 
+	perf_swcounter_event(PERF_COUNT_SW_PAGE_FAULTS, 1, 0, regs, address);
+
 	/*
 	 * If we're in an interrupt or have no user
 	 * context, we must not take the fault..
@@ -195,10 +198,16 @@ survive:
 			goto do_sigbus;
 		BUG();
 	}
-	if (fault & VM_FAULT_MAJOR)
+
+	if (fault & VM_FAULT_MAJOR) {
 		tsk->maj_flt++;
-	else
+		perf_swcounter_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1, 0,
+				     regs, address);
+	} else {
 		tsk->min_flt++;
+		perf_swcounter_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, 1, 0,
+				     regs, address);
+	}
 
 	/* If we get here, the page fault has been handled.  Do the TLB refill
 	   now from the newly-setup PTE, to avoid having to fault again right