sparc, sparc64: use arch/sparc/include

The majority of this patch was created by the following script:

***
ASM=arch/sparc/include/asm
mkdir -p $ASM
git mv include/asm-sparc64/ftrace.h $ASM
git rm include/asm-sparc64/*
git mv include/asm-sparc/* $ASM
sed -ie 's/asm-sparc64/asm/g' $ASM/*
sed -ie 's/asm-sparc/asm/g' $ASM/*
***

The rest was an update of the top-level Makefile to use sparc
for header files when sparc64 is being build.
And a small fixlet to pick up the correct unistd.h from
sparc64 code.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>

1 files changed, 288 insertions, 0 deletions

diff --git a/arch/sparc/include/asm/system_32.h b/arch/sparc/include/asm/system_32.h
new file mode 100644
index 00000000000..b4b024445fc
--- /dev/null
+++ b/arch/sparc/include/asm/system_32.h
@@ -0,0 +1,288 @@
+#ifndef __SPARC_SYSTEM_H
+#define __SPARC_SYSTEM_H
+
+#include <linux/kernel.h>
+#include <linux/threads.h>	/* NR_CPUS */
+#include <linux/thread_info.h>
+
+#include <asm/page.h>
+#include <asm/psr.h>
+#include <asm/ptrace.h>
+#include <asm/btfixup.h>
+#include <asm/smp.h>
+
+#ifndef __ASSEMBLY__
+
+#include <linux/irqflags.h>
+
+/*
+ * Sparc (general) CPU types
+ */
+enum sparc_cpu {
+  sun4        = 0x00,
+  sun4c       = 0x01,
+  sun4m       = 0x02,
+  sun4d       = 0x03,
+  sun4e       = 0x04,
+  sun4u       = 0x05, /* V8 ploos ploos */
+  sun_unknown = 0x06,
+  ap1000      = 0x07, /* almost a sun4m */
+};
+
+/* Really, userland should not be looking at any of this... */
+#ifdef __KERNEL__
+
+extern enum sparc_cpu sparc_cpu_model;
+
+#ifndef CONFIG_SUN4
+#define ARCH_SUN4C_SUN4 (sparc_cpu_model==sun4c)
+#define ARCH_SUN4 0
+#else
+#define ARCH_SUN4C_SUN4 1
+#define ARCH_SUN4 1
+#endif
+
+#define SUN4M_NCPUS            4              /* Architectural limit of sun4m. */
+
+extern char reboot_command[];
+
+extern struct thread_info *current_set[NR_CPUS];
+
+extern unsigned long empty_bad_page;
+extern unsigned long empty_bad_page_table;
+extern unsigned long empty_zero_page;
+
+extern void sun_do_break(void);
+extern int serial_console;
+extern int stop_a_enabled;
+
+static inline int con_is_present(void)
+{
+	return serial_console ? 0 : 1;
+}
+
+/* When a context switch happens we must flush all user windows so that
+ * the windows of the current process are flushed onto its stack. This
+ * way the windows are all clean for the next process and the stack
+ * frames are up to date.
+ */
+extern void flush_user_windows(void);
+extern void kill_user_windows(void);
+extern void synchronize_user_stack(void);
+extern void fpsave(unsigned long *fpregs, unsigned long *fsr,
+		   void *fpqueue, unsigned long *fpqdepth);
+
+#ifdef CONFIG_SMP
+#define SWITCH_ENTER(prv) \
+	do {			\
+	if (test_tsk_thread_flag(prv, TIF_USEDFPU)) { \
+		put_psr(get_psr() | PSR_EF); \
+		fpsave(&(prv)->thread.float_regs[0], &(prv)->thread.fsr, \
+		       &(prv)->thread.fpqueue[0], &(prv)->thread.fpqdepth); \
+		clear_tsk_thread_flag(prv, TIF_USEDFPU); \
+		(prv)->thread.kregs->psr &= ~PSR_EF; \
+	} \
+	} while(0)
+
+#define SWITCH_DO_LAZY_FPU(next)	/* */
+#else
+#define SWITCH_ENTER(prv)		/* */
+#define SWITCH_DO_LAZY_FPU(nxt)	\
+	do {			\
+	if (last_task_used_math != (nxt))		\
+		(nxt)->thread.kregs->psr&=~PSR_EF;	\
+	} while(0)
+#endif
+
+extern void flushw_all(void);
+
+/*
+ * Flush windows so that the VM switch which follows
+ * would not pull the stack from under us.
+ *
+ * SWITCH_ENTER and SWITH_DO_LAZY_FPU do not work yet (e.g. SMP does not work)
+ * XXX WTF is the above comment? Found in late teen 2.4.x.
+ */
+#define prepare_arch_switch(next) do { \
+	__asm__ __volatile__( \
+	".globl\tflush_patch_switch\nflush_patch_switch:\n\t" \
+	"save %sp, -0x40, %sp; save %sp, -0x40, %sp; save %sp, -0x40, %sp\n\t" \
+	"save %sp, -0x40, %sp; save %sp, -0x40, %sp; save %sp, -0x40, %sp\n\t" \
+	"save %sp, -0x40, %sp\n\t" \
+	"restore; restore; restore; restore; restore; restore; restore"); \
+} while(0)
+
+	/* Much care has gone into this code, do not touch it.
+	 *
+	 * We need to loadup regs l0/l1 for the newly forked child
+	 * case because the trap return path relies on those registers
+	 * holding certain values, gcc is told that they are clobbered.
+	 * Gcc needs registers for 3 values in and 1 value out, so we
+	 * clobber every non-fixed-usage register besides l2/l3/o4/o5.  -DaveM
+	 *
+	 * Hey Dave, that do not touch sign is too much of an incentive
+	 * - Anton & Pete
+	 */
+#define switch_to(prev, next, last) do {						\
+	SWITCH_ENTER(prev);								\
+	SWITCH_DO_LAZY_FPU(next);							\
+	cpu_set(smp_processor_id(), next->active_mm->cpu_vm_mask);			\
+	__asm__ __volatile__(								\
+	"sethi	%%hi(here - 0x8), %%o7\n\t"						\
+	"mov	%%g6, %%g3\n\t"								\
+	"or	%%o7, %%lo(here - 0x8), %%o7\n\t"					\
+	"rd	%%psr, %%g4\n\t"							\
+	"std	%%sp, [%%g6 + %4]\n\t"							\
+	"rd	%%wim, %%g5\n\t"							\
+	"wr	%%g4, 0x20, %%psr\n\t"							\
+	"nop\n\t"									\
+	"std	%%g4, [%%g6 + %3]\n\t"							\
+	"ldd	[%2 + %3], %%g4\n\t"							\
+	"mov	%2, %%g6\n\t"								\
+	".globl	patchme_store_new_current\n"						\
+"patchme_store_new_current:\n\t"							\
+	"st	%2, [%1]\n\t"								\
+	"wr	%%g4, 0x20, %%psr\n\t"							\
+	"nop\n\t"									\
+	"nop\n\t"									\
+	"nop\n\t"	/* LEON needs all 3 nops: load to %sp depends on CWP. */		\
+	"ldd	[%%g6 + %4], %%sp\n\t"							\
+	"wr	%%g5, 0x0, %%wim\n\t"							\
+	"ldd	[%%sp + 0x00], %%l0\n\t"						\
+	"ldd	[%%sp + 0x38], %%i6\n\t"						\
+	"wr	%%g4, 0x0, %%psr\n\t"							\
+	"nop\n\t"									\
+	"nop\n\t"									\
+	"jmpl	%%o7 + 0x8, %%g0\n\t"							\
+	" ld	[%%g3 + %5], %0\n\t"							\
+	"here:\n"									\
+        : "=&r" (last)									\
+        : "r" (&(current_set[hard_smp_processor_id()])),	\
+	  "r" (task_thread_info(next)),				\
+	  "i" (TI_KPSR),					\
+	  "i" (TI_KSP),						\
+	  "i" (TI_TASK)						\
+	:       "g1", "g2", "g3", "g4", "g5",       "g7",	\
+	  "l0", "l1",       "l3", "l4", "l5", "l6", "l7",	\
+	  "i0", "i1", "i2", "i3", "i4", "i5",			\
+	  "o0", "o1", "o2", "o3",                   "o7");	\
+	} while(0)
+
+/* XXX Change this if we ever use a PSO mode kernel. */
+#define mb()	__asm__ __volatile__ ("" : : : "memory")
+#define rmb()	mb()
+#define wmb()	mb()
+#define read_barrier_depends()	do { } while(0)
+#define set_mb(__var, __value)  do { __var = __value; mb(); } while(0)
+#define smp_mb()	__asm__ __volatile__("":::"memory")
+#define smp_rmb()	__asm__ __volatile__("":::"memory")
+#define smp_wmb()	__asm__ __volatile__("":::"memory")
+#define smp_read_barrier_depends()	do { } while(0)
+
+#define nop() __asm__ __volatile__ ("nop")
+
+/* This has special calling conventions */
+#ifndef CONFIG_SMP
+BTFIXUPDEF_CALL(void, ___xchg32, void)
+#endif
+
+static inline unsigned long xchg_u32(__volatile__ unsigned long *m, unsigned long val)
+{
+#ifdef CONFIG_SMP
+	__asm__ __volatile__("swap [%2], %0"
+			     : "=&r" (val)
+			     : "0" (val), "r" (m)
+			     : "memory");
+	return val;
+#else
+	register unsigned long *ptr asm("g1");
+	register unsigned long ret asm("g2");
+
+	ptr = (unsigned long *) m;
+	ret = val;
+
+	/* Note: this is magic and the nop there is
+	   really needed. */
+	__asm__ __volatile__(
+	"mov	%%o7, %%g4\n\t"
+	"call	___f____xchg32\n\t"
+	" nop\n\t"
+	: "=&r" (ret)
+	: "0" (ret), "r" (ptr)
+	: "g3", "g4", "g7", "memory", "cc");
+
+	return ret;
+#endif
+}
+
+#define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr))))
+
+extern void __xchg_called_with_bad_pointer(void);
+
+static inline unsigned long __xchg(unsigned long x, __volatile__ void * ptr, int size)
+{
+	switch (size) {
+	case 4:
+		return xchg_u32(ptr, x);
+	};
+	__xchg_called_with_bad_pointer();
+	return x;
+}
+
+/* Emulate cmpxchg() the same way we emulate atomics,
+ * by hashing the object address and indexing into an array
+ * of spinlocks to get a bit of performance...
+ *
+ * See arch/sparc/lib/atomic32.c for implementation.
+ *
+ * Cribbed from <asm-parisc/atomic.h>
+ */
+#define __HAVE_ARCH_CMPXCHG	1
+
+/* bug catcher for when unsupported size is used - won't link */
+extern void __cmpxchg_called_with_bad_pointer(void);
+/* we only need to support cmpxchg of a u32 on sparc */
+extern unsigned long __cmpxchg_u32(volatile u32 *m, u32 old, u32 new_);
+
+/* don't worry...optimizer will get rid of most of this */
+static inline unsigned long
+__cmpxchg(volatile void *ptr, unsigned long old, unsigned long new_, int size)
+{
+	switch (size) {
+	case 4:
+		return __cmpxchg_u32((u32 *)ptr, (u32)old, (u32)new_);
+	default:
+		__cmpxchg_called_with_bad_pointer();
+		break;
+	}
+	return old;
+}
+
+#define cmpxchg(ptr, o, n)						\
+({									\
+	__typeof__(*(ptr)) _o_ = (o);					\
+	__typeof__(*(ptr)) _n_ = (n);					\
+	(__typeof__(*(ptr))) __cmpxchg((ptr), (unsigned long)_o_,	\
+			(unsigned long)_n_, sizeof(*(ptr)));		\
+})
+
+#include <asm-generic/cmpxchg-local.h>
+
+/*
+ * cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make
+ * them available.
+ */
+#define cmpxchg_local(ptr, o, n)				  	       \
+	((__typeof__(*(ptr)))__cmpxchg_local_generic((ptr), (unsigned long)(o),\
+			(unsigned long)(n), sizeof(*(ptr))))
+#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n))
+
+extern void die_if_kernel(char *str, struct pt_regs *regs) __attribute__ ((noreturn));
+
+#endif /* __KERNEL__ */
+
+#endif /* __ASSEMBLY__ */
+
+#define arch_align_stack(x) (x)
+
+#endif /* !(__SPARC_SYSTEM_H) */