sparc: remove CONFIG_SUN4

While doing some easy cleanups on the sparc code I noticed that the
CONFIG_SUN4 code seems to be worse than the rest - there were some
"I don't know how it should work, but the current code definitely cannot
work." places.

And while I have seen people running Linux on machines like a
SPARCstation 5 a few years ago I don't recall having seen sun4
machines, even less ones running Linux.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 0 insertions, 54 deletions

diff --git a/arch/sparc/kernel/entry.S b/arch/sparc/kernel/entry.S
index e8cdf715a54..68689facaaa 100644
--- a/arch/sparc/kernel/entry.S
+++ b/arch/sparc/kernel/entry.S
@@ -20,11 +20,7 @@
 #include <asm/memreg.h>
 #include <asm/page.h>
 #include <asm/pgtable.h>
-#ifdef CONFIG_SUN4
-#include <asm/pgtsun4.h>
-#else
 #include <asm/pgtsun4c.h>
-#endif
 #include <asm/winmacro.h>
 #include <asm/signal.h>
 #include <asm/obio.h>
@@ -775,11 +771,7 @@ vac_linesize_patch_32:		subcc	%l7, 32, %l7
  * Ugly, but we cant use hardware flushing on the sun4 and we'd require
  * two instructions (Anton)
  */
-#ifdef CONFIG_SUN4
-vac_hwflush_patch1_on:		nop
-#else
 vac_hwflush_patch1_on:		addcc	%l7, -PAGE_SIZE, %l7
-#endif
 
 vac_hwflush_patch2_on:		sta	%g0, [%l3 + %l7] ASI_HWFLUSHSEG
 
@@ -798,42 +790,10 @@ vac_hwflush_patch2_on:		sta	%g0, [%l3 + %l7] ASI_HWFLUSHSEG
 ! %l7 = 1 for textfault
 ! We want error in %l5, vaddr in %l6
 sun4c_fault:
-#ifdef CONFIG_SUN4
-	sethi	%hi(sun4c_memerr_reg), %l4
-	ld	[%l4+%lo(sun4c_memerr_reg)], %l4  ! memerr ctrl reg addr
-	ld	[%l4], %l6		! memerr ctrl reg
-	ld	[%l4 + 4], %l5		! memerr vaddr reg
-	andcc	%l6, 0x80, %g0		! check for error type
-	st	%g0, [%l4 + 4]		! clear the error
-	be	0f			! normal error
-	 sethi	%hi(AC_BUS_ERROR), %l4	! bus err reg addr
-
-	call	prom_halt	! something weird happened
-					! what exactly did happen?
-					! what should we do here?
-
-0:	or	%l4, %lo(AC_BUS_ERROR), %l4	! bus err reg addr
-	lduba	[%l4] ASI_CONTROL, %l6	! bus err reg
-
-	cmp    %l7, 1			! text fault?
-	be	1f			! yes
-	 nop
-
-	ld     [%l1], %l4		! load instruction that caused fault
-	srl	%l4, 21, %l4
-	andcc	%l4, 1, %g0		! store instruction?
-
-	be	1f			! no
-	 sethi	%hi(SUN4C_SYNC_BADWRITE), %l4 ! yep
-					! %lo(SUN4C_SYNC_BADWRITE) = 0
-	or	%l4, %l6, %l6		! set write bit to emulate sun4c
-1:
-#else
 	sethi	%hi(AC_SYNC_ERR), %l4
 	add	%l4, 0x4, %l6			! AC_SYNC_VA in %l6
 	lda	[%l6] ASI_CONTROL, %l5		! Address
 	lda	[%l4] ASI_CONTROL, %l6		! Error, retained for a bit
-#endif
 
 	andn	%l5, 0xfff, %l5			! Encode all info into l7
 	srl	%l6, 14, %l4
@@ -880,12 +840,7 @@ sun4c_fault:
 	or      %l4, %lo(swapper_pg_dir), %l4
 	sll     %l6, 2, %l6
 	ld      [%l4 + %l6], %l4
-#ifdef CONFIG_SUN4
-	sethi	%hi(PAGE_MASK), %l6
-	andcc	%l4, %l6, %g0
-#else
 	andcc   %l4, PAGE_MASK, %g0
-#endif
 	be      sun4c_fault_fromuser
 	 lduXa  [%l5] ASI_SEGMAP, %l4
 
@@ -937,11 +892,7 @@ invalid_segment_patch1:
 	ld	[%l6 + 0x08], %l3	! tmp = entry->vaddr
 
 	! Flush segment from the cache.
-#ifdef CONFIG_SUN4
-	sethi	%hi((128 * 1024)), %l7
-#else
 	sethi	%hi((64 * 1024)), %l7
-#endif
 9:
 vac_hwflush_patch1:
 vac_linesize_patch:
@@ -1029,12 +980,7 @@ invalid_segment_patch2:
 	or	%l4, %lo(swapper_pg_dir), %l4
 	sll	%l3, 2, %l3
 	ld	[%l4 + %l3], %l4
-#ifndef CONFIG_SUN4
 	and	%l4, PAGE_MASK, %l4
-#else
-	sethi	%hi(PAGE_MASK), %l6
-	and	%l4, %l6, %l4
-#endif
 
 	srl	%l5, (PAGE_SHIFT - 2), %l6
 	and	%l6, ((SUN4C_PTRS_PER_PTE - 1) << 2), %l6