Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next

Pull sparc updates from David Miller:

1) Kill off support for sun4c and Cypress sun4m chips.

   And as a result we were able to also kill off that ugly btfixup thing
   that required multi-stage links of the final vmlinux image in the
   Kbuild system.  This should make the kbuild maintainers really happy.

   Thanks a lot to Sam Ravnborg for his tireless efforts to get this
   going.

2) Convert sparc64 to nobootmem.  I suspect now with sparc32 being a lot
   cleaner, it should be able to fall in line and modernize in this area
   too.

3) Make sparc32 use generic clockevents, from Tkhai Kirill.

[ I fixed up the BPF rules, and tried to clean up the build rules too.
  But I don't have - or want - a sparc cross-build environment, so the
  BPF rule bug and the related build cleanup was all done with just a
  bare "make -n" pseudo-test.      - Linus ]

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next: (110 commits)
  sparc32: use flushi when run-time patching in per_cpu_patch
  sparc32: fix cpuid_patch run-time patching
  sparc32: drop unused inline functions in srmmu.c
  sparc32: drop unused functions in pgtsrmmu.h
  sparc32,leon: move leon mmu functions to leon_mm.c
  sparc32,leon: remove duplicate definitions in leon.h
  sparc32,leon: remove duplicate UART register definitions
  sparc32,leon: move leon ASI definitions to asi.h
  sparc32: move trap table to a separate file
  sparc64: renamed ttable.S to ttable_64.S
  sparc32: Remove asm/sysen.h header.
  sparc32: Delete asm/smpprim.h
  sparc32: Remove unused empty_bad_page{,_table} declarations.
  sparc32: Kill boot_cpu_id4
  sparc32: Move GET_PROCESSOR*_ID() out of asm/asmmacro.h
  sparc32: Remove completely unused code from asm/cache.h
  sparc32: Add ucmpdi2.o to obj-y instead of lib-y.
  sparc32: add ucmpdi2
  sparc: introduce arch/sparc/Kbuild
  sparc: remove obsolete documentation
  ...

1 files changed, 0 insertions, 357 deletions

diff --git a/arch/sparc/lib/udiv.S b/arch/sparc/lib/udiv.S
deleted file mode 100644
index 2101405bdfc..00000000000
--- a/arch/sparc/lib/udiv.S
+++ /dev/null
@@ -1,357 +0,0 @@
-/*
- * udiv.S:      This routine was taken from glibc-1.09 and is covered
- *              by the GNU Library General Public License Version 2.
- */
-
-
-/* This file is generated from divrem.m4; DO NOT EDIT! */
-/*
- * Division and remainder, from Appendix E of the Sparc Version 8
- * Architecture Manual, with fixes from Gordon Irlam.
- */
-
-/*
- * Input: dividend and divisor in %o0 and %o1 respectively.
- *
- * m4 parameters:
- *  .udiv	name of function to generate
- *  div		div=div => %o0 / %o1; div=rem => %o0 % %o1
- *  false		false=true => signed; false=false => unsigned
- *
- * Algorithm parameters:
- *  N		how many bits per iteration we try to get (4)
- *  WORDSIZE	total number of bits (32)
- *
- * Derived constants:
- *  TOPBITS	number of bits in the top decade of a number
- *
- * Important variables:
- *  Q		the partial quotient under development (initially 0)
- *  R		the remainder so far, initially the dividend
- *  ITER	number of main division loop iterations required;
- *		equal to ceil(log2(quotient) / N).  Note that this
- *		is the log base (2^N) of the quotient.
- *  V		the current comparand, initially divisor*2^(ITER*N-1)
- *
- * Cost:
- *  Current estimate for non-large dividend is
- *	ceil(log2(quotient) / N) * (10 + 7N/2) + C
- *  A large dividend is one greater than 2^(31-TOPBITS) and takes a
- *  different path, as the upper bits of the quotient must be developed
- *  one bit at a time.
- */
-
-
-	.globl .udiv
-	.globl _Udiv
-.udiv:
-_Udiv:	/* needed for export */
-
-	! Ready to divide.  Compute size of quotient; scale comparand.
-	orcc	%o1, %g0, %o5
-	bne	1f
-	 mov	%o0, %o3
-
-		! Divide by zero trap.  If it returns, return 0 (about as
-		! wrong as possible, but that is what SunOS does...).
-		ta	ST_DIV0
-		retl
-		 clr	%o0
-
-1:
-	cmp	%o3, %o5			! if %o1 exceeds %o0, done
-	blu	Lgot_result		! (and algorithm fails otherwise)
-	 clr	%o2
-
-	sethi	%hi(1 << (32 - 4 - 1)), %g1
-
-	cmp	%o3, %g1
-	blu	Lnot_really_big
-	 clr	%o4
-
-	! Here the dividend is >= 2**(31-N) or so.  We must be careful here,
-	! as our usual N-at-a-shot divide step will cause overflow and havoc.
-	! The number of bits in the result here is N*ITER+SC, where SC <= N.
-	! Compute ITER in an unorthodox manner: know we need to shift V into
-	! the top decade: so do not even bother to compare to R.
-	1:
-		cmp	%o5, %g1
-		bgeu	3f
-		 mov	1, %g7
-
-		sll	%o5, 4, %o5
-
-		b	1b
-		 add	%o4, 1, %o4
-
-	! Now compute %g7.
-	2:
-		addcc	%o5, %o5, %o5
-		bcc	Lnot_too_big
-		 add	%g7, 1, %g7
-
-		! We get here if the %o1 overflowed while shifting.
-		! This means that %o3 has the high-order bit set.
-		! Restore %o5 and subtract from %o3.
-		sll	%g1, 4, %g1	! high order bit
-		srl	%o5, 1, %o5		! rest of %o5
-		add	%o5, %g1, %o5
-
-		b	Ldo_single_div
-		 sub	%g7, 1, %g7
-
-	Lnot_too_big:
-	3:
-		cmp	%o5, %o3
-		blu	2b
-		 nop
-
-		be	Ldo_single_div
-		 nop
-	/* NB: these are commented out in the V8-Sparc manual as well */
-	/* (I do not understand this) */
-	! %o5 > %o3: went too far: back up 1 step
-	!	srl	%o5, 1, %o5
-	!	dec	%g7
-	! do single-bit divide steps
-	!
-	! We have to be careful here.  We know that %o3 >= %o5, so we can do the
-	! first divide step without thinking.  BUT, the others are conditional,
-	! and are only done if %o3 >= 0.  Because both %o3 and %o5 may have the high-
-	! order bit set in the first step, just falling into the regular
-	! division loop will mess up the first time around.
-	! So we unroll slightly...
-	Ldo_single_div:
-		subcc	%g7, 1, %g7
-		bl	Lend_regular_divide
-		 nop
-
-		sub	%o3, %o5, %o3
-		mov	1, %o2
-
-		b	Lend_single_divloop
-		 nop
-	Lsingle_divloop:
-		sll	%o2, 1, %o2
-		bl	1f
-		 srl	%o5, 1, %o5
-		! %o3 >= 0
-		sub	%o3, %o5, %o3
-		b	2f
-		 add	%o2, 1, %o2
-	1:	! %o3 < 0
-		add	%o3, %o5, %o3
-		sub	%o2, 1, %o2
-	2:
-	Lend_single_divloop:
-		subcc	%g7, 1, %g7
-		bge	Lsingle_divloop
-		 tst	%o3
-
-		b,a	Lend_regular_divide
-
-Lnot_really_big:
-1:
-	sll	%o5, 4, %o5
-
-	cmp	%o5, %o3
-	bleu	1b
-	 addcc	%o4, 1, %o4
-
-	be	Lgot_result
-	 sub	%o4, 1, %o4
-
-	tst	%o3	! set up for initial iteration
-Ldivloop:
-	sll	%o2, 4, %o2
-		! depth 1, accumulated bits 0
-	bl	L.1.16
-	 srl	%o5,1,%o5
-	! remainder is positive
-	subcc	%o3,%o5,%o3
-			! depth 2, accumulated bits 1
-	bl	L.2.17
-	 srl	%o5,1,%o5
-	! remainder is positive
-	subcc	%o3,%o5,%o3
-			! depth 3, accumulated bits 3
-	bl	L.3.19
-	 srl	%o5,1,%o5
-	! remainder is positive
-	subcc	%o3,%o5,%o3
-			! depth 4, accumulated bits 7
-	bl	L.4.23
-	 srl	%o5,1,%o5
-	! remainder is positive
-	subcc	%o3,%o5,%o3
-	b	9f
-	 add	%o2, (7*2+1), %o2
-
-L.4.23:
-	! remainder is negative
-	addcc	%o3,%o5,%o3
-	b	9f
-	 add	%o2, (7*2-1), %o2
-
-L.3.19:
-	! remainder is negative
-	addcc	%o3,%o5,%o3
-			! depth 4, accumulated bits 5
-	bl	L.4.21
-	 srl	%o5,1,%o5
-	! remainder is positive
-	subcc	%o3,%o5,%o3
-	b	9f
-	 add	%o2, (5*2+1), %o2
-
-L.4.21:
-	! remainder is negative
-	addcc	%o3,%o5,%o3
-	b	9f
-	 add	%o2, (5*2-1), %o2
-
-L.2.17:
-	! remainder is negative
-	addcc	%o3,%o5,%o3
-			! depth 3, accumulated bits 1
-	bl	L.3.17
-	 srl	%o5,1,%o5
-	! remainder is positive
-	subcc	%o3,%o5,%o3
-			! depth 4, accumulated bits 3
-	bl	L.4.19
-	 srl	%o5,1,%o5
-	! remainder is positive
-	subcc	%o3,%o5,%o3
-	b	9f
-	 add	%o2, (3*2+1), %o2
-
-L.4.19:
-	! remainder is negative
-	addcc	%o3,%o5,%o3
-	b	9f
-	 add	%o2, (3*2-1), %o2
-
-L.3.17:
-	! remainder is negative
-	addcc	%o3,%o5,%o3
-			! depth 4, accumulated bits 1
-	bl	L.4.17
-	 srl	%o5,1,%o5
-	! remainder is positive
-	subcc	%o3,%o5,%o3
-	b	9f
-	 add	%o2, (1*2+1), %o2
-
-L.4.17:
-	! remainder is negative
-	addcc	%o3,%o5,%o3
-	b	9f
-	 add	%o2, (1*2-1), %o2
-
-L.1.16:
-	! remainder is negative
-	addcc	%o3,%o5,%o3
-			! depth 2, accumulated bits -1
-	bl	L.2.15
-	 srl	%o5,1,%o5
-	! remainder is positive
-	subcc	%o3,%o5,%o3
-			! depth 3, accumulated bits -1
-	bl	L.3.15
-	 srl	%o5,1,%o5
-	! remainder is positive
-	subcc	%o3,%o5,%o3
-			! depth 4, accumulated bits -1
-	bl	L.4.15
-	 srl	%o5,1,%o5
-	! remainder is positive
-	subcc	%o3,%o5,%o3
-	b	9f
-	 add	%o2, (-1*2+1), %o2
-
-L.4.15:
-	! remainder is negative
-	addcc	%o3,%o5,%o3
-	b	9f
-	 add	%o2, (-1*2-1), %o2
-
-L.3.15:
-	! remainder is negative
-	addcc	%o3,%o5,%o3
-			! depth 4, accumulated bits -3
-	bl	L.4.13
-	 srl	%o5,1,%o5
-	! remainder is positive
-	subcc	%o3,%o5,%o3
-	b	9f
-	 add	%o2, (-3*2+1), %o2
-
-L.4.13:
-	! remainder is negative
-	addcc	%o3,%o5,%o3
-	b	9f
-	 add	%o2, (-3*2-1), %o2
-
-L.2.15:
-	! remainder is negative
-	addcc	%o3,%o5,%o3
-			! depth 3, accumulated bits -3
-	bl	L.3.13
-	 srl	%o5,1,%o5
-	! remainder is positive
-	subcc	%o3,%o5,%o3
-			! depth 4, accumulated bits -5
-	bl	L.4.11
-	 srl	%o5,1,%o5
-	! remainder is positive
-	subcc	%o3,%o5,%o3
-	b	9f
-	 add	%o2, (-5*2+1), %o2
-
-L.4.11:
-	! remainder is negative
-	addcc	%o3,%o5,%o3
-	b	9f
-	 add	%o2, (-5*2-1), %o2
-
-L.3.13:
-	! remainder is negative
-	addcc	%o3,%o5,%o3
-			! depth 4, accumulated bits -7
-	bl	L.4.9
-	 srl	%o5,1,%o5
-	! remainder is positive
-	subcc	%o3,%o5,%o3
-	b	9f
-	 add	%o2, (-7*2+1), %o2
-
-L.4.9:
-	! remainder is negative
-	addcc	%o3,%o5,%o3
-	b	9f
-	 add	%o2, (-7*2-1), %o2
-
-	9:
-Lend_regular_divide:
-	subcc	%o4, 1, %o4
-	bge	Ldivloop
-	 tst	%o3
-
-	bl,a	Lgot_result
-	! non-restoring fixup here (one instruction only!)
-	sub	%o2, 1, %o2
-
-Lgot_result:
-
-	retl
-	 mov %o2, %o0
-
-	.globl	.udiv_patch
-.udiv_patch:
-	wr	%g0, 0x0, %y
-	nop
-	nop
-	retl
-	 udiv	%o0, %o1, %o0
-	nop