[SPARC64]: Rewrite bootup sequence.

Instead of all of this cpu-specific code to remap the kernel
to the correct location, use portable firmware calls to do
this instead.

What we do now is the following in position independant
assembler:

	chosen_node = prom_finddevice("/chosen");
	prom_mmu_ihandle_cache = prom_getint(chosen_node, "mmu");
	vaddr = 4MB_ALIGN(current_text_addr());
	prom_translate(vaddr, &paddr_high, &paddr_low, &mode);
	prom_boot_mapping_mode = mode;
	prom_boot_mapping_phys_high = paddr_high;
	prom_boot_mapping_phys_low = paddr_low;
	prom_map(-1, 8 * 1024 * 1024, KERNBASE, paddr_low);

and that replaces the massive amount of by-hand TLB probing and
programming we used to do here.

The new code should also handle properly the case where the kernel
is mapped at the correct address already (think: future kexec
support).

Consequently, the bulk of remap_kernel() dies as does the entirety
of arch/sparc64/prom/map.S

We try to share some strings in the PROM library with the ones used
at bootup, and while we're here mark input strings to oplib.h routines
with "const" when appropriate.

There are many more simplifications now possible.  For one thing, we
can consolidate the two copies we now have of a lot of cpu setup code
sitting in head.S and trampoline.S.

This is a significant step towards CONFIG_DEBUG_PAGEALLOC support.

Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 26 insertions, 24 deletions

diff --git a/arch/sparc64/prom/tree.c b/arch/sparc64/prom/tree.c
index ccf73258ebf..b1ff9e87dcc 100644
--- a/arch/sparc64/prom/tree.c
+++ b/arch/sparc64/prom/tree.c
@@ -69,7 +69,7 @@ prom_getsibling(int node)
  * Return -1 on error.
  */
 __inline__ int
-prom_getproplen(int node, char *prop)
+prom_getproplen(int node, const char *prop)
 {
 	if((!node) || (!prop)) return -1;
 	return p1275_cmd ("getproplen", 
@@ -83,20 +83,20 @@ prom_getproplen(int node, char *prop)
  * was successful the length will be returned, else -1 is returned.
  */
 __inline__ int
-prom_getproperty(int node, char *prop, char *buffer, int bufsize)
+prom_getproperty(int node, const char *prop, char *buffer, int bufsize)
 {
 	int plen;
 
 	plen = prom_getproplen(node, prop);
-	if((plen > bufsize) || (plen == 0) || (plen == -1))
+	if ((plen > bufsize) || (plen == 0) || (plen == -1)) {
 		return -1;
-	else {
+	} else {
 		/* Ok, things seem all right. */
-		return p1275_cmd ("getprop", 
-				  P1275_ARG(1,P1275_ARG_IN_STRING)|
-				  P1275_ARG(2,P1275_ARG_OUT_BUF)|
-				  P1275_INOUT(4, 1), 
-				  node, prop, buffer, P1275_SIZE(plen));
+		return p1275_cmd(prom_getprop_name, 
+				 P1275_ARG(1,P1275_ARG_IN_STRING)|
+				 P1275_ARG(2,P1275_ARG_OUT_BUF)|
+				 P1275_INOUT(4, 1), 
+				 node, prop, buffer, P1275_SIZE(plen));
 	}
 }
 
@@ -104,7 +104,7 @@ prom_getproperty(int node, char *prop, char *buffer, int bufsize)
  * on failure.
  */
 __inline__ int
-prom_getint(int node, char *prop)
+prom_getint(int node, const char *prop)
 {
 	int intprop;
 
@@ -119,7 +119,7 @@ prom_getint(int node, char *prop)
  */
 
 int
-prom_getintdefault(int node, char *property, int deflt)
+prom_getintdefault(int node, const char *property, int deflt)
 {
 	int retval;
 
@@ -131,7 +131,7 @@ prom_getintdefault(int node, char *property, int deflt)
 
 /* Acquire a boolean property, 1=TRUE 0=FALSE. */
 int
-prom_getbool(int node, char *prop)
+prom_getbool(int node, const char *prop)
 {
 	int retval;
 
@@ -145,7 +145,7 @@ prom_getbool(int node, char *prop)
  * buffer.
  */
 void
-prom_getstring(int node, char *prop, char *user_buf, int ubuf_size)
+prom_getstring(int node, const char *prop, char *user_buf, int ubuf_size)
 {
 	int len;
 
@@ -160,7 +160,7 @@ prom_getstring(int node, char *prop, char *user_buf, int ubuf_size)
  * YES = 1   NO = 0
  */
 int
-prom_nodematch(int node, char *name)
+prom_nodematch(int node, const char *name)
 {
 	char namebuf[128];
 	prom_getproperty(node, "name", namebuf, sizeof(namebuf));
@@ -172,7 +172,7 @@ prom_nodematch(int node, char *name)
  * 'nodename'.  Return node if successful, zero if not.
  */
 int
-prom_searchsiblings(int node_start, char *nodename)
+prom_searchsiblings(int node_start, const char *nodename)
 {
 
 	int thisnode, error;
@@ -294,7 +294,7 @@ prom_firstprop(int node, char *buffer)
  * property types for this node.
  */
 __inline__ char *
-prom_nextprop(int node, char *oprop, char *buffer)
+prom_nextprop(int node, const char *oprop, char *buffer)
 {
 	char buf[32];
 
@@ -314,15 +314,17 @@ prom_nextprop(int node, char *oprop, char *buffer)
 }
 
 int
-prom_finddevice(char *name)
+prom_finddevice(const char *name)
 {
-	if(!name) return 0;
-	return p1275_cmd ("finddevice", P1275_ARG(0,P1275_ARG_IN_STRING)|
-				        P1275_INOUT(1, 1), 
-				        name);
+	if (!name)
+		return 0;
+	return p1275_cmd(prom_finddev_name,
+			 P1275_ARG(0,P1275_ARG_IN_STRING)|
+			 P1275_INOUT(1, 1), 
+			 name);
 }
 
-int prom_node_has_property(int node, char *prop)
+int prom_node_has_property(int node, const char *prop)
 {
 	char buf [32];
         
@@ -339,7 +341,7 @@ int prom_node_has_property(int node, char *prop)
  * of 'size' bytes.  Return the number of bytes the prom accepted.
  */
 int
-prom_setprop(int node, char *pname, char *value, int size)
+prom_setprop(int node, const char *pname, char *value, int size)
 {
 	if(size == 0) return 0;
 	if((pname == 0) || (value == 0)) return 0;
@@ -364,7 +366,7 @@ prom_inst2pkg(int inst)
  * FIXME: Should work for v0 as well
  */
 int
-prom_pathtoinode(char *path)
+prom_pathtoinode(const char *path)
 {
 	int node, inst;