summaryrefslogtreecommitdiffstats
path: root/arch/tile
diff options
context:
space:
mode:
authorChris Metcalf <cmetcalf@tilera.com>2010-10-14 16:23:03 -0400
committerChris Metcalf <cmetcalf@tilera.com>2010-10-15 15:38:09 -0400
commita78c942df64ef4cf495fd4d8715e48501bd7f8a4 (patch)
treefe44212d36e6ca23dbe9f2c633824389216a3d1d /arch/tile
parentbf65e440e8248f22b2eacf8d47961bb9d52260f7 (diff)
arch/tile: parameterize system PLs to support KVM port
While not a port to KVM (yet), this change modifies the kernel to be able to build either at PL1 or at PL2 with a suitable config switch. Pushing up this change avoids handling branch merge issues going forward with the KVM work. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
Diffstat (limited to 'arch/tile')
-rw-r--r--arch/tile/Kconfig12
-rw-r--r--arch/tile/Makefile2
-rw-r--r--arch/tile/include/arch/spr_def.h85
-rw-r--r--arch/tile/include/arch/spr_def_32.h39
-rw-r--r--arch/tile/include/asm/irqflags.h64
-rw-r--r--arch/tile/include/asm/page.h27
-rw-r--r--arch/tile/include/asm/processor.h11
-rw-r--r--arch/tile/include/asm/ptrace.h4
-rw-r--r--arch/tile/include/asm/system.h2
-rw-r--r--arch/tile/include/hv/hypervisor.h30
-rw-r--r--arch/tile/kernel/entry.S12
-rw-r--r--arch/tile/kernel/head_32.S5
-rw-r--r--arch/tile/kernel/intvec_32.S67
-rw-r--r--arch/tile/kernel/irq.c16
-rw-r--r--arch/tile/kernel/messaging.c2
-rw-r--r--arch/tile/kernel/process.c12
-rw-r--r--arch/tile/kernel/regs_32.S2
-rw-r--r--arch/tile/kernel/setup.c28
-rw-r--r--arch/tile/kernel/smp.c2
-rw-r--r--arch/tile/kernel/traps.c2
-rw-r--r--arch/tile/kvm/Kconfig38
-rw-r--r--arch/tile/mm/fault.c6
-rw-r--r--arch/tile/mm/init.c2
23 files changed, 338 insertions, 132 deletions
diff --git a/arch/tile/Kconfig b/arch/tile/Kconfig
index 2361e3e80bd..89cfee07efa 100644
--- a/arch/tile/Kconfig
+++ b/arch/tile/Kconfig
@@ -96,6 +96,7 @@ config HVC_TILE
config TILE
def_bool y
+ select HAVE_KVM if !TILEGX
select GENERIC_FIND_FIRST_BIT
select GENERIC_FIND_NEXT_BIT
select USE_GENERIC_SMP_HELPERS
@@ -314,6 +315,15 @@ config HARDWALL
bool "Hardwall support to allow access to user dynamic network"
default y
+config KERNEL_PL
+ int "Processor protection level for kernel"
+ range 1 2
+ default "1"
+ ---help---
+ This setting determines the processor protection level the
+ kernel will be built to run at. Generally you should use
+ the default value here.
+
endmenu # Tilera-specific configuration
menu "Bus options"
@@ -354,3 +364,5 @@ source "security/Kconfig"
source "crypto/Kconfig"
source "lib/Kconfig"
+
+source "arch/tile/kvm/Kconfig"
diff --git a/arch/tile/Makefile b/arch/tile/Makefile
index a700f7f6cf5..17acce70569 100644
--- a/arch/tile/Makefile
+++ b/arch/tile/Makefile
@@ -53,6 +53,8 @@ libs-y += $(LIBGCC_PATH)
# See arch/tile/Kbuild for content of core part of the kernel
core-y += arch/tile/
+core-$(CONFIG_KVM) += arch/tile/kvm/
+
ifdef TILERA_ROOT
INSTALL_PATH ?= $(TILERA_ROOT)/tile/boot
endif
diff --git a/arch/tile/include/arch/spr_def.h b/arch/tile/include/arch/spr_def.h
index c8fdbd9a45e..442fcba0d12 100644
--- a/arch/tile/include/arch/spr_def.h
+++ b/arch/tile/include/arch/spr_def.h
@@ -12,8 +12,93 @@
* more details.
*/
+/*
+ * In addition to including the proper base SPR definition file, depending
+ * on machine architecture, this file defines several macros which allow
+ * kernel code to use protection-level dependent SPRs without worrying
+ * about which PL it's running at. In these macros, the PL that the SPR
+ * or interrupt number applies to is replaced by K.
+ */
+
+#if CONFIG_KERNEL_PL != 1 && CONFIG_KERNEL_PL != 2
+#error CONFIG_KERNEL_PL must be 1 or 2
+#endif
+
+/* Concatenate 4 strings. */
+#define __concat4(a, b, c, d) a ## b ## c ## d
+#define _concat4(a, b, c, d) __concat4(a, b, c, d)
+
#ifdef __tilegx__
#include <arch/spr_def_64.h>
+
+/* TILE-Gx dependent, protection-level dependent SPRs. */
+
+#define SPR_INTERRUPT_MASK_K \
+ _concat4(SPR_INTERRUPT_MASK_, CONFIG_KERNEL_PL,,)
+#define SPR_INTERRUPT_MASK_SET_K \
+ _concat4(SPR_INTERRUPT_MASK_SET_, CONFIG_KERNEL_PL,,)
+#define SPR_INTERRUPT_MASK_RESET_K \
+ _concat4(SPR_INTERRUPT_MASK_RESET_, CONFIG_KERNEL_PL,,)
+#define SPR_INTERRUPT_VECTOR_BASE_K \
+ _concat4(SPR_INTERRUPT_VECTOR_BASE_, CONFIG_KERNEL_PL,,)
+
+#define SPR_IPI_MASK_K \
+ _concat4(SPR_IPI_MASK_, CONFIG_KERNEL_PL,,)
+#define SPR_IPI_MASK_RESET_K \
+ _concat4(SPR_IPI_MASK_RESET_, CONFIG_KERNEL_PL,,)
+#define SPR_IPI_MASK_SET_K \
+ _concat4(SPR_IPI_MASK_SET_, CONFIG_KERNEL_PL,,)
+#define SPR_IPI_EVENT_K \
+ _concat4(SPR_IPI_EVENT_, CONFIG_KERNEL_PL,,)
+#define SPR_IPI_EVENT_RESET_K \
+ _concat4(SPR_IPI_EVENT_RESET_, CONFIG_KERNEL_PL,,)
+#define SPR_IPI_MASK_SET_K \
+ _concat4(SPR_IPI_MASK_SET_, CONFIG_KERNEL_PL,,)
+#define INT_IPI_K \
+ _concat4(INT_IPI_, CONFIG_KERNEL_PL,,)
+
+#define SPR_SINGLE_STEP_CONTROL_K \
+ _concat4(SPR_SINGLE_STEP_CONTROL_, CONFIG_KERNEL_PL,,)
+#define SPR_SINGLE_STEP_EN_K_K \
+ _concat4(SPR_SINGLE_STEP_EN_, CONFIG_KERNEL_PL, _, CONFIG_KERNEL_PL)
+#define INT_SINGLE_STEP_K \
+ _concat4(INT_SINGLE_STEP_, CONFIG_KERNEL_PL,,)
+
#else
#include <arch/spr_def_32.h>
+
+/* TILEPro dependent, protection-level dependent SPRs. */
+
+#define SPR_INTERRUPT_MASK_K_0 \
+ _concat4(SPR_INTERRUPT_MASK_, CONFIG_KERNEL_PL, _0,)
+#define SPR_INTERRUPT_MASK_K_1 \
+ _concat4(SPR_INTERRUPT_MASK_, CONFIG_KERNEL_PL, _1,)
+#define SPR_INTERRUPT_MASK_SET_K_0 \
+ _concat4(SPR_INTERRUPT_MASK_SET_, CONFIG_KERNEL_PL, _0,)
+#define SPR_INTERRUPT_MASK_SET_K_1 \
+ _concat4(SPR_INTERRUPT_MASK_SET_, CONFIG_KERNEL_PL, _1,)
+#define SPR_INTERRUPT_MASK_RESET_K_0 \
+ _concat4(SPR_INTERRUPT_MASK_RESET_, CONFIG_KERNEL_PL, _0,)
+#define SPR_INTERRUPT_MASK_RESET_K_1 \
+ _concat4(SPR_INTERRUPT_MASK_RESET_, CONFIG_KERNEL_PL, _1,)
+
#endif
+
+/* Generic protection-level dependent SPRs. */
+
+#define SPR_SYSTEM_SAVE_K_0 \
+ _concat4(SPR_SYSTEM_SAVE_, CONFIG_KERNEL_PL, _0,)
+#define SPR_SYSTEM_SAVE_K_1 \
+ _concat4(SPR_SYSTEM_SAVE_, CONFIG_KERNEL_PL, _1,)
+#define SPR_SYSTEM_SAVE_K_2 \
+ _concat4(SPR_SYSTEM_SAVE_, CONFIG_KERNEL_PL, _2,)
+#define SPR_SYSTEM_SAVE_K_3 \
+ _concat4(SPR_SYSTEM_SAVE_, CONFIG_KERNEL_PL, _3,)
+#define SPR_EX_CONTEXT_K_0 \
+ _concat4(SPR_EX_CONTEXT_, CONFIG_KERNEL_PL, _0,)
+#define SPR_EX_CONTEXT_K_1 \
+ _concat4(SPR_EX_CONTEXT_, CONFIG_KERNEL_PL, _1,)
+#define SPR_INTCTRL_K_STATUS \
+ _concat4(SPR_INTCTRL_, CONFIG_KERNEL_PL, _STATUS,)
+#define INT_INTCTRL_K \
+ _concat4(INT_INTCTRL_, CONFIG_KERNEL_PL,,)
diff --git a/arch/tile/include/arch/spr_def_32.h b/arch/tile/include/arch/spr_def_32.h
index b4fc06864df..bbc1f4c924e 100644
--- a/arch/tile/include/arch/spr_def_32.h
+++ b/arch/tile/include/arch/spr_def_32.h
@@ -56,58 +56,93 @@
#define SPR_EX_CONTEXT_1_1__ICS_SHIFT 2
#define SPR_EX_CONTEXT_1_1__ICS_RMASK 0x1
#define SPR_EX_CONTEXT_1_1__ICS_MASK 0x4
+#define SPR_EX_CONTEXT_2_0 0x4605
+#define SPR_EX_CONTEXT_2_1 0x4606
+#define SPR_EX_CONTEXT_2_1__PL_SHIFT 0
+#define SPR_EX_CONTEXT_2_1__PL_RMASK 0x3
+#define SPR_EX_CONTEXT_2_1__PL_MASK 0x3
+#define SPR_EX_CONTEXT_2_1__ICS_SHIFT 2
+#define SPR_EX_CONTEXT_2_1__ICS_RMASK 0x1
+#define SPR_EX_CONTEXT_2_1__ICS_MASK 0x4
#define SPR_FAIL 0x4e09
#define SPR_INTCTRL_0_STATUS 0x4a07
#define SPR_INTCTRL_1_STATUS 0x4807
+#define SPR_INTCTRL_2_STATUS 0x4607
#define SPR_INTERRUPT_CRITICAL_SECTION 0x4e0a
#define SPR_INTERRUPT_MASK_0_0 0x4a08
#define SPR_INTERRUPT_MASK_0_1 0x4a09
#define SPR_INTERRUPT_MASK_1_0 0x4809
#define SPR_INTERRUPT_MASK_1_1 0x480a
+#define SPR_INTERRUPT_MASK_2_0 0x4608
+#define SPR_INTERRUPT_MASK_2_1 0x4609
#define SPR_INTERRUPT_MASK_RESET_0_0 0x4a0a
#define SPR_INTERRUPT_MASK_RESET_0_1 0x4a0b
#define SPR_INTERRUPT_MASK_RESET_1_0 0x480b
#define SPR_INTERRUPT_MASK_RESET_1_1 0x480c
+#define SPR_INTERRUPT_MASK_RESET_2_0 0x460a
+#define SPR_INTERRUPT_MASK_RESET_2_1 0x460b
#define SPR_INTERRUPT_MASK_SET_0_0 0x4a0c
#define SPR_INTERRUPT_MASK_SET_0_1 0x4a0d
#define SPR_INTERRUPT_MASK_SET_1_0 0x480d
#define SPR_INTERRUPT_MASK_SET_1_1 0x480e
+#define SPR_INTERRUPT_MASK_SET_2_0 0x460c
+#define SPR_INTERRUPT_MASK_SET_2_1 0x460d
#define SPR_MPL_DMA_CPL_SET_0 0x5800
#define SPR_MPL_DMA_CPL_SET_1 0x5801
+#define SPR_MPL_DMA_CPL_SET_2 0x5802
#define SPR_MPL_DMA_NOTIFY_SET_0 0x3800
#define SPR_MPL_DMA_NOTIFY_SET_1 0x3801
+#define SPR_MPL_DMA_NOTIFY_SET_2 0x3802
#define SPR_MPL_INTCTRL_0_SET_0 0x4a00
#define SPR_MPL_INTCTRL_0_SET_1 0x4a01
+#define SPR_MPL_INTCTRL_0_SET_2 0x4a02
#define SPR_MPL_INTCTRL_1_SET_0 0x4800
#define SPR_MPL_INTCTRL_1_SET_1 0x4801
+#define SPR_MPL_INTCTRL_1_SET_2 0x4802
+#define SPR_MPL_INTCTRL_2_SET_0 0x4600
+#define SPR_MPL_INTCTRL_2_SET_1 0x4601
+#define SPR_MPL_INTCTRL_2_SET_2 0x4602
#define SPR_MPL_SN_ACCESS_SET_0 0x0800
#define SPR_MPL_SN_ACCESS_SET_1 0x0801
+#define SPR_MPL_SN_ACCESS_SET_2 0x0802
#define SPR_MPL_SN_CPL_SET_0 0x5a00
#define SPR_MPL_SN_CPL_SET_1 0x5a01
+#define SPR_MPL_SN_CPL_SET_2 0x5a02
#define SPR_MPL_SN_FIREWALL_SET_0 0x2c00
#define SPR_MPL_SN_FIREWALL_SET_1 0x2c01
+#define SPR_MPL_SN_FIREWALL_SET_2 0x2c02
#define SPR_MPL_SN_NOTIFY_SET_0 0x2a00
#define SPR_MPL_SN_NOTIFY_SET_1 0x2a01
+#define SPR_MPL_SN_NOTIFY_SET_2 0x2a02
#define SPR_MPL_UDN_ACCESS_SET_0 0x0c00
#define SPR_MPL_UDN_ACCESS_SET_1 0x0c01
+#define SPR_MPL_UDN_ACCESS_SET_2 0x0c02
#define SPR_MPL_UDN_AVAIL_SET_0 0x4000
#define SPR_MPL_UDN_AVAIL_SET_1 0x4001
+#define SPR_MPL_UDN_AVAIL_SET_2 0x4002
#define SPR_MPL_UDN_CA_SET_0 0x3c00
#define SPR_MPL_UDN_CA_SET_1 0x3c01
+#define SPR_MPL_UDN_CA_SET_2 0x3c02
#define SPR_MPL_UDN_COMPLETE_SET_0 0x1400
#define SPR_MPL_UDN_COMPLETE_SET_1 0x1401
+#define SPR_MPL_UDN_COMPLETE_SET_2 0x1402
#define SPR_MPL_UDN_FIREWALL_SET_0 0x3000
#define SPR_MPL_UDN_FIREWALL_SET_1 0x3001
+#define SPR_MPL_UDN_FIREWALL_SET_2 0x3002
#define SPR_MPL_UDN_REFILL_SET_0 0x1000
#define SPR_MPL_UDN_REFILL_SET_1 0x1001
+#define SPR_MPL_UDN_REFILL_SET_2 0x1002
#define SPR_MPL_UDN_TIMER_SET_0 0x3600
#define SPR_MPL_UDN_TIMER_SET_1 0x3601
+#define SPR_MPL_UDN_TIMER_SET_2 0x3602
#define SPR_MPL_WORLD_ACCESS_SET_0 0x4e00
#define SPR_MPL_WORLD_ACCESS_SET_1 0x4e01
+#define SPR_MPL_WORLD_ACCESS_SET_2 0x4e02
#define SPR_PASS 0x4e0b
#define SPR_PERF_COUNT_0 0x4205
#define SPR_PERF_COUNT_1 0x4206
#define SPR_PERF_COUNT_CTL 0x4207
+#define SPR_PERF_COUNT_DN_CTL 0x4210
#define SPR_PERF_COUNT_STS 0x4208
#define SPR_PROC_STATUS 0x4f00
#define SPR_SIM_CONTROL 0x4e0c
@@ -124,6 +159,10 @@
#define SPR_SYSTEM_SAVE_1_1 0x4901
#define SPR_SYSTEM_SAVE_1_2 0x4902
#define SPR_SYSTEM_SAVE_1_3 0x4903
+#define SPR_SYSTEM_SAVE_2_0 0x4700
+#define SPR_SYSTEM_SAVE_2_1 0x4701
+#define SPR_SYSTEM_SAVE_2_2 0x4702
+#define SPR_SYSTEM_SAVE_2_3 0x4703
#define SPR_TILE_COORD 0x4c17
#define SPR_TILE_RTF_HWM 0x4e10
#define SPR_TILE_TIMER_CONTROL 0x3205
diff --git a/arch/tile/include/asm/irqflags.h b/arch/tile/include/asm/irqflags.h
index 45cf67c2f28..6ebdd7d1e67 100644
--- a/arch/tile/include/asm/irqflags.h
+++ b/arch/tile/include/asm/irqflags.h
@@ -47,53 +47,53 @@
int __n = (n); \
int __mask = 1 << (__n & 0x1f); \
if (__n < 32) \
- __insn_mtspr(SPR_INTERRUPT_MASK_SET_1_0, __mask); \
+ __insn_mtspr(SPR_INTERRUPT_MASK_SET_K_0, __mask); \
else \
- __insn_mtspr(SPR_INTERRUPT_MASK_SET_1_1, __mask); \
+ __insn_mtspr(SPR_INTERRUPT_MASK_SET_K_1, __mask); \
} while (0)
#define interrupt_mask_reset(n) do { \
int __n = (n); \
int __mask = 1 << (__n & 0x1f); \
if (__n < 32) \
- __insn_mtspr(SPR_INTERRUPT_MASK_RESET_1_0, __mask); \
+ __insn_mtspr(SPR_INTERRUPT_MASK_RESET_K_0, __mask); \
else \
- __insn_mtspr(SPR_INTERRUPT_MASK_RESET_1_1, __mask); \
+ __insn_mtspr(SPR_INTERRUPT_MASK_RESET_K_1, __mask); \
} while (0)
#define interrupt_mask_check(n) ({ \
int __n = (n); \
(((__n < 32) ? \
- __insn_mfspr(SPR_INTERRUPT_MASK_1_0) : \
- __insn_mfspr(SPR_INTERRUPT_MASK_1_1)) \
+ __insn_mfspr(SPR_INTERRUPT_MASK_K_0) : \
+ __insn_mfspr(SPR_INTERRUPT_MASK_K_1)) \
>> (__n & 0x1f)) & 1; \
})
#define interrupt_mask_set_mask(mask) do { \
unsigned long long __m = (mask); \
- __insn_mtspr(SPR_INTERRUPT_MASK_SET_1_0, (unsigned long)(__m)); \
- __insn_mtspr(SPR_INTERRUPT_MASK_SET_1_1, (unsigned long)(__m>>32)); \
+ __insn_mtspr(SPR_INTERRUPT_MASK_SET_K_0, (unsigned long)(__m)); \
+ __insn_mtspr(SPR_INTERRUPT_MASK_SET_K_1, (unsigned long)(__m>>32)); \
} while (0)
#define interrupt_mask_reset_mask(mask) do { \
unsigned long long __m = (mask); \
- __insn_mtspr(SPR_INTERRUPT_MASK_RESET_1_0, (unsigned long)(__m)); \
- __insn_mtspr(SPR_INTERRUPT_MASK_RESET_1_1, (unsigned long)(__m>>32)); \
+ __insn_mtspr(SPR_INTERRUPT_MASK_RESET_K_0, (unsigned long)(__m)); \
+ __insn_mtspr(SPR_INTERRUPT_MASK_RESET_K_1, (unsigned long)(__m>>32)); \
} while (0)
#else
#define interrupt_mask_set(n) \
- __insn_mtspr(SPR_INTERRUPT_MASK_SET_1, (1UL << (n)))
+ __insn_mtspr(SPR_INTERRUPT_MASK_SET_K, (1UL << (n)))
#define interrupt_mask_reset(n) \
- __insn_mtspr(SPR_INTERRUPT_MASK_RESET_1, (1UL << (n)))
+ __insn_mtspr(SPR_INTERRUPT_MASK_RESET_K, (1UL << (n)))
#define interrupt_mask_check(n) \
- ((__insn_mfspr(SPR_INTERRUPT_MASK_1) >> (n)) & 1)
+ ((__insn_mfspr(SPR_INTERRUPT_MASK_K) >> (n)) & 1)
#define interrupt_mask_set_mask(mask) \
- __insn_mtspr(SPR_INTERRUPT_MASK_SET_1, (mask))
+ __insn_mtspr(SPR_INTERRUPT_MASK_SET_K, (mask))
#define interrupt_mask_reset_mask(mask) \
- __insn_mtspr(SPR_INTERRUPT_MASK_RESET_1, (mask))
+ __insn_mtspr(SPR_INTERRUPT_MASK_RESET_K, (mask))
#endif
/*
* The set of interrupts we want active if irqs are enabled.
* Note that in particular, the tile timer interrupt comes and goes
* from this set, since we have no other way to turn off the timer.
- * Likewise, INTCTRL_1 is removed and re-added during device
+ * Likewise, INTCTRL_K is removed and re-added during device
* interrupts, as is the the hardwall UDN_FIREWALL interrupt.
* We use a low bit (MEM_ERROR) as our sentinel value and make sure it
* is always claimed as an "active interrupt" so we can query that bit
@@ -168,14 +168,14 @@ DECLARE_PER_CPU(unsigned long long, interrupts_enabled_mask);
/* Return 0 or 1 to indicate whether interrupts are currently disabled. */
#define IRQS_DISABLED(tmp) \
- mfspr tmp, INTERRUPT_MASK_1; \
+ mfspr tmp, SPR_INTERRUPT_MASK_K; \
andi tmp, tmp, 1
/* Load up a pointer to &interrupts_enabled_mask. */
#define GET_INTERRUPTS_ENABLED_MASK_PTR(reg) \
- moveli reg, hw2_last(interrupts_enabled_mask); \
- shl16insli reg, reg, hw1(interrupts_enabled_mask); \
- shl16insli reg, reg, hw0(interrupts_enabled_mask); \
+ moveli reg, hw2_last(interrupts_enabled_mask); \
+ shl16insli reg, reg, hw1(interrupts_enabled_mask); \
+ shl16insli reg, reg, hw0(interrupts_enabled_mask); \
add reg, reg, tp
/* Disable interrupts. */
@@ -183,18 +183,18 @@ DECLARE_PER_CPU(unsigned long long, interrupts_enabled_mask);
moveli tmp0, hw2_last(LINUX_MASKABLE_INTERRUPTS); \
shl16insli tmp0, tmp0, hw1(LINUX_MASKABLE_INTERRUPTS); \
shl16insli tmp0, tmp0, hw0(LINUX_MASKABLE_INTERRUPTS); \
- mtspr INTERRUPT_MASK_SET_1, tmp0
+ mtspr SPR_INTERRUPT_MASK_SET_K, tmp0
/* Disable ALL synchronous interrupts (used by NMI entry). */
#define IRQ_DISABLE_ALL(tmp) \
movei tmp, -1; \
- mtspr INTERRUPT_MASK_SET_1, tmp
+ mtspr SPR_INTERRUPT_MASK_SET_K, tmp
/* Enable interrupts. */
#define IRQ_ENABLE(tmp0, tmp1) \
GET_INTERRUPTS_ENABLED_MASK_PTR(tmp0); \
ld tmp0, tmp0; \
- mtspr INTERRUPT_MASK_RESET_1, tmp0
+ mtspr SPR_INTERRUPT_MASK_RESET_K, tmp0
#else /* !__tilegx__ */
@@ -208,14 +208,14 @@ DECLARE_PER_CPU(unsigned long long, interrupts_enabled_mask);
* (making the original code's write of the "high" mask word idempotent).
*/
#define IRQS_DISABLED(tmp) \
- mfspr tmp, INTERRUPT_MASK_1_0; \
+ mfspr tmp, SPR_INTERRUPT_MASK_K_0; \
shri tmp, tmp, INT_MEM_ERROR; \
andi tmp, tmp, 1
/* Load up a pointer to &interrupts_enabled_mask. */
#define GET_INTERRUPTS_ENABLED_MASK_PTR(reg) \
- moveli reg, lo16(interrupts_enabled_mask); \
- auli reg, reg, ha16(interrupts_enabled_mask);\
+ moveli reg, lo16(interrupts_enabled_mask); \
+ auli reg, reg, ha16(interrupts_enabled_mask); \
add reg, reg, tp
/* Disable interrupts. */
@@ -225,16 +225,16 @@ DECLARE_PER_CPU(unsigned long long, interrupts_enabled_mask);
moveli tmp1, lo16(LINUX_MASKABLE_INTERRUPTS) \
}; \
{ \
- mtspr INTERRUPT_MASK_SET_1_0, tmp0; \
+ mtspr SPR_INTERRUPT_MASK_SET_K_0, tmp0; \
auli tmp1, tmp1, ha16(LINUX_MASKABLE_INTERRUPTS) \
}; \
- mtspr INTERRUPT_MASK_SET_1_1, tmp1
+ mtspr SPR_INTERRUPT_MASK_SET_K_1, tmp1
/* Disable ALL synchronous interrupts (used by NMI entry). */
#define IRQ_DISABLE_ALL(tmp) \
movei tmp, -1; \
- mtspr INTERRUPT_MASK_SET_1_0, tmp; \
- mtspr INTERRUPT_MASK_SET_1_1, tmp
+ mtspr SPR_INTERRUPT_MASK_SET_K_0, tmp; \
+ mtspr SPR_INTERRUPT_MASK_SET_K_1, tmp
/* Enable interrupts. */
#define IRQ_ENABLE(tmp0, tmp1) \
@@ -244,8 +244,8 @@ DECLARE_PER_CPU(unsigned long long, interrupts_enabled_mask);
addi tmp1, tmp0, 4 \
}; \
lw tmp1, tmp1; \
- mtspr INTERRUPT_MASK_RESET_1_0, tmp0; \
- mtspr INTERRUPT_MASK_RESET_1_1, tmp1
+ mtspr SPR_INTERRUPT_MASK_RESET_K_0, tmp0; \
+ mtspr SPR_INTERRUPT_MASK_RESET_K_1, tmp1
#endif
/*
diff --git a/arch/tile/include/asm/page.h b/arch/tile/include/asm/page.h
index 7d90641cf18..7979a45430d 100644
--- a/arch/tile/include/asm/page.h
+++ b/arch/tile/include/asm/page.h
@@ -199,17 +199,17 @@ static inline __attribute_const__ int get_order(unsigned long size)
* If you want more physical memory than this then see the CONFIG_HIGHMEM
* option in the kernel configuration.
*
- * The top two 16MB chunks in the table below (VIRT and HV) are
- * unavailable to Linux. Since the kernel interrupt vectors must live
- * at 0xfd000000, we map all of the bottom of RAM at this address with
- * a huge page table entry to minimize its ITLB footprint (as well as
- * at PAGE_OFFSET). The last architected requirement is that user
- * interrupt vectors live at 0xfc000000, so we make that range of
- * memory available to user processes. The remaining regions are sized
- * as shown; after the first four addresses, we show "typical" values,
- * since the actual addresses depend on kernel #defines.
+ * The top 16MB chunk in the table below is unavailable to Linux. Since
+ * the kernel interrupt vectors must live at ether 0xfe000000 or 0xfd000000
+ * (depending on whether the kernel is at PL2 or Pl1), we map all of the
+ * bottom of RAM at this address with a huge page table entry to minimize
+ * its ITLB footprint (as well as at PAGE_OFFSET). The last architected
+ * requirement is that user interrupt vectors live at 0xfc000000, so we
+ * make that range of memory available to user processes. The remaining
+ * regions are sized as shown; the first four addresses use the PL 1
+ * values, and after that, we show "typical" values, since the actual
+ * addresses depend on kernel #defines.
*
- * MEM_VIRT_INTRPT 0xff000000
* MEM_HV_INTRPT 0xfe000000
* MEM_SV_INTRPT (kernel code) 0xfd000000
* MEM_USER_INTRPT (user vector) 0xfc000000
@@ -221,9 +221,14 @@ static inline __attribute_const__ int get_order(unsigned long size)
*/
#define MEM_USER_INTRPT _AC(0xfc000000, UL)
+#if CONFIG_KERNEL_PL == 1
#define MEM_SV_INTRPT _AC(0xfd000000, UL)
#define MEM_HV_INTRPT _AC(0xfe000000, UL)
-#define MEM_VIRT_INTRPT _AC(0xff000000, UL)
+#else
+#define MEM_GUEST_INTRPT _AC(0xfd000000, UL)
+#define MEM_SV_INTRPT _AC(0xfe000000, UL)
+#define MEM_HV_INTRPT _AC(0xff000000, UL)
+#endif
#define INTRPT_SIZE 0x4000
diff --git a/arch/tile/include/asm/processor.h b/arch/tile/include/asm/processor.h
index ccd5f842568..1747ff3946b 100644
--- a/arch/tile/include/asm/processor.h
+++ b/arch/tile/include/asm/processor.h
@@ -328,18 +328,21 @@ extern int kdata_huge;
* Note that assembly code assumes that USER_PL is zero.
*/
#define USER_PL 0
-#define KERNEL_PL 1
+#if CONFIG_KERNEL_PL == 2
+#define GUEST_PL 1
+#endif
+#define KERNEL_PL CONFIG_KERNEL_PL
-/* SYSTEM_SAVE_1_0 holds the current cpu number ORed with ksp0. */
+/* SYSTEM_SAVE_K_0 holds the current cpu number ORed with ksp0. */
#define CPU_LOG_MASK_VALUE 12
#define CPU_MASK_VALUE ((1 << CPU_LOG_MASK_VALUE) - 1)
#if CONFIG_NR_CPUS > CPU_MASK_VALUE
# error Too many cpus!
#endif
#define raw_smp_processor_id() \
- ((int)__insn_mfspr(SPR_SYSTEM_SAVE_1_0) & CPU_MASK_VALUE)
+ ((int)__insn_mfspr(SPR_SYSTEM_SAVE_K_0) & CPU_MASK_VALUE)
#define get_current_ksp0() \
- (__insn_mfspr(SPR_SYSTEM_SAVE_1_0) & ~CPU_MASK_VALUE)
+ (__insn_mfspr(SPR_SYSTEM_SAVE_K_0) & ~CPU_MASK_VALUE)
#define next_current_ksp0(task) ({ \
unsigned long __ksp0 = task_ksp0(task); \
int __cpu = raw_smp_processor_id(); \
diff --git a/arch/tile/include/asm/ptrace.h b/arch/tile/include/asm/ptrace.h
index 4a02bb07397..ac6d343129d 100644
--- a/arch/tile/include/asm/ptrace.h
+++ b/arch/tile/include/asm/ptrace.h
@@ -62,8 +62,8 @@ struct pt_regs {
pt_reg_t lr; /* aliases regs[TREG_LR] */
/* Saved special registers. */
- pt_reg_t pc; /* stored in EX_CONTEXT_1_0 */
- pt_reg_t ex1; /* stored in EX_CONTEXT_1_1 (PL and ICS bit) */
+ pt_reg_t pc; /* stored in EX_CONTEXT_K_0 */
+ pt_reg_t ex1; /* stored in EX_CONTEXT_K_1 (PL and ICS bit) */
pt_reg_t faultnum; /* fault number (INT_SWINT_1 for syscall) */
pt_reg_t orig_r0; /* r0 at syscall entry, else zero */
pt_reg_t flags; /* flags (see below) */
diff --git a/arch/tile/include/asm/system.h b/arch/tile/include/asm/system.h
index fb7ff9574d7..5388850deeb 100644
--- a/arch/tile/include/asm/system.h
+++ b/arch/tile/include/asm/system.h
@@ -164,7 +164,7 @@ extern struct task_struct *_switch_to(struct task_struct *prev,
/* Helper function for _switch_to(). */
extern struct task_struct *__switch_to(struct task_struct *prev,
struct task_struct *next,
- unsigned long new_system_save_1_0);
+ unsigned long new_system_save_k_0);
/* Address that switched-away from tasks are at. */
extern unsigned long get_switch_to_pc(void);
diff --git a/arch/tile/include/hv/hypervisor.h b/arch/tile/include/hv/hypervisor.h
index 9bd303a141b..f672544cd4f 100644
--- a/arch/tile/include/hv/hypervisor.h
+++ b/arch/tile/include/hv/hypervisor.h
@@ -1003,37 +1003,37 @@ int hv_console_write(HV_VirtAddr bytes, int len);
* when these occur in a client's interrupt critical section, they must
* be delivered through the downcall mechanism.
*
- * A downcall is initially delivered to the client as an INTCTRL_1
- * interrupt. Upon entry to the INTCTRL_1 vector, the client must
- * immediately invoke the hv_downcall_dispatch service. This service
- * will not return; instead it will cause one of the client's actual
- * downcall-handling interrupt vectors to be entered. The EX_CONTEXT
- * registers in the client will be set so that when the client irets,
- * it will return to the code which was interrupted by the INTCTRL_1
- * interrupt.
- *
- * Under some circumstances, the firing of INTCTRL_1 can race with
+ * A downcall is initially delivered to the client as an INTCTRL_CL
+ * interrupt, where CL is the client's PL. Upon entry to the INTCTRL_CL
+ * vector, the client must immediately invoke the hv_downcall_dispatch
+ * service. This service will not return; instead it will cause one of
+ * the client's actual downcall-handling interrupt vectors to be entered.
+ * The EX_CONTEXT registers in the client will be set so that when the
+ * client irets, it will return to the code which was interrupted by the
+ * INTCTRL_CL interrupt.
+ *
+ * Under some circumstances, the firing of INTCTRL_CL can race with
* the lowering of a device interrupt. In such a case, the
* hv_downcall_dispatch service may issue an iret instruction instead
* of entering one of the client's actual downcall-handling interrupt
* vectors. This will return execution to the location that was
- * interrupted by INTCTRL_1.
+ * interrupted by INTCTRL_CL.
*
* Any saving of registers should be done by the actual handling
- * vectors; no registers should be changed by the INTCTRL_1 handler.
+ * vectors; no registers should be changed by the INTCTRL_CL handler.
* In particular, the client should not use a jal instruction to invoke
* the hv_downcall_dispatch service, as that would overwrite the client's
* lr register. Note that the hv_downcall_dispatch service may overwrite
* one or more of the client's system save registers.
*
- * The client must not modify the INTCTRL_1_STATUS SPR. The hypervisor
+ * The client must not modify the INTCTRL_CL_STATUS SPR. The hypervisor
* will set this register to cause a downcall to happen, and will clear
* it when no further downcalls are pending.
*
- * When a downcall vector is entered, the INTCTRL_1 interrupt will be
+ * When a downcall vector is entered, the INTCTRL_CL interrupt will be
* masked. When the client is done processing a downcall, and is ready
* to accept another, it must unmask this interrupt; if more downcalls
- * are pending, this will cause the INTCTRL_1 vector to be reentered.
+ * are pending, this will cause the INTCTRL_CL vector to be reentered.
* Currently the following interrupt vectors can be entered through a
* downcall:
*
diff --git a/arch/tile/kernel/entry.S b/arch/tile/kernel/entry.S
index 80d13f013bb..fd8dc42abdc 100644
--- a/arch/tile/kernel/entry.S
+++ b/arch/tile/kernel/entry.S
@@ -15,7 +15,9 @@
#include <linux/linkage.h>
#include <linux/unistd.h>
#include <asm/irqflags.h>
+#include <asm/processor.h>
#include <arch/abi.h>
+#include <arch/spr_def.h>
#ifdef __tilegx__
#define bnzt bnezt
@@ -80,7 +82,7 @@ STD_ENTRY(KBacktraceIterator_init_current)
STD_ENTRY(cpu_idle_on_new_stack)
{
move sp, r1
- mtspr SYSTEM_SAVE_1_0, r2
+ mtspr SPR_SYSTEM_SAVE_K_0, r2
}
jal free_thread_info
j cpu_idle
@@ -102,15 +104,15 @@ STD_ENTRY(smp_nap)
STD_ENTRY(_cpu_idle)
{
lnk r0
- movei r1, 1
+ movei r1, KERNEL_PL
}
{
addli r0, r0, _cpu_idle_nap - .
mtspr INTERRUPT_CRITICAL_SECTION, r1
}
- IRQ_ENABLE(r2, r3) /* unmask, but still with ICS set */
- mtspr EX_CONTEXT_1_1, r1 /* PL1, ICS clear */
- mtspr EX_CONTEXT_1_0, r0
+ IRQ_ENABLE(r2, r3) /* unmask, but still with ICS set */
+ mtspr SPR_EX_CONTEXT_K_1, r1 /* Kernel PL, ICS clear */
+ mtspr SPR_EX_CONTEXT_K_0, r0
iret
.global _cpu_idle_nap
_cpu_idle_nap:
diff --git a/arch/tile/kernel/head_32.S b/arch/tile/kernel/head_32.S
index 2b4f6c09170..90e7c443569 100644
--- a/arch/tile/kernel/head_32.S
+++ b/arch/tile/kernel/head_32.S
@@ -23,6 +23,7 @@
#include <asm/asm-offsets.h>
#include <hv/hypervisor.h>
#include <arch/chip.h>
+#include <arch/spr_def.h>
/*
* This module contains the entry code for kernel images. It performs the
@@ -76,7 +77,7 @@ ENTRY(_start)
}
1:
- /* Get our processor number and save it away in SAVE_1_0. */
+ /* Get our processor number and save it away in SAVE_K_0. */
jal hv_inquire_topology
mulll_uu r4, r1, r2 /* r1 == y, r2 == width */
add r4, r4, r0 /* r0 == x, so r4 == cpu == y*width + x */
@@ -124,7 +125,7 @@ ENTRY(_start)
lw r0, r0
lw sp, r1
or r4, sp, r4
- mtspr SYSTEM_SAVE_1_0, r4 /* save ksp0 + cpu */
+ mtspr SPR_SYSTEM_SAVE_K_0, r4 /* save ksp0 + cpu */
addi sp, sp, -STACK_TOP_DELTA
{
move lr, zero /* stop backtraces in the called function */
diff --git a/arch/tile/kernel/intvec_32.S b/arch/tile/kernel/intvec_32.S
index f87c5c044d6..206dc7e1fe3 100644
--- a/arch/tile/kernel/intvec_32.S
+++ b/arch/tile/kernel/intvec_32.S
@@ -32,8 +32,8 @@
# error "No support for kernel preemption currently"
#endif
-#if INT_INTCTRL_1 < 32 || INT_INTCTRL_1 >= 48
-# error INT_INTCTRL_1 coded to set high interrupt mask
+#if INT_INTCTRL_K < 32 || INT_INTCTRL_K >= 48
+# error INT_INTCTRL_K coded to set high interrupt mask
#endif
#define PTREGS_PTR(reg, ptreg) addli reg, sp, C_ABI_SAVE_AREA_SIZE + (ptreg)
@@ -132,8 +132,8 @@ intvec_\vecname:
/* Temporarily save a register so we have somewhere to work. */
- mtspr SYSTEM_SAVE_1_1, r0
- mfspr r0, EX_CONTEXT_1_1
+ mtspr SPR_SYSTEM_SAVE_K_1, r0
+ mfspr r0, SPR_EX_CONTEXT_K_1
/* The cmpxchg code clears sp to force us to reset it here on fault. */
{
@@ -167,18 +167,18 @@ intvec_\vecname:
* The page_fault handler may be downcalled directly by the
* hypervisor even when Linux is running and has ICS set.
*
- * In this case the contents of EX_CONTEXT_1_1 reflect the
+ * In this case the contents of EX_CONTEXT_K_1 reflect the
* previous fault and can't be relied on to choose whether or
* not to reinitialize the stack pointer. So we add a test
- * to see whether SYSTEM_SAVE_1_2 has the high bit set,
+ * to see whether SYSTEM_SAVE_K_2 has the high bit set,
* and if so we don't reinitialize sp, since we must be coming
* from Linux. (In fact the precise case is !(val & ~1),
* but any Linux PC has to have the high bit set.)
*
- * Note that the hypervisor *always* sets SYSTEM_SAVE_1_2 for
+ * Note that the hypervisor *always* sets SYSTEM_SAVE_K_2 for
* any path that turns into a downcall to one of our TLB handlers.
*/
- mfspr r0, SYSTEM_SAVE_1_2
+ mfspr r0, SPR_SYSTEM_SAVE_K_2
{
blz r0, 0f /* high bit in S_S_1_2 is for a PC to use */
move r0, sp
@@ -187,12 +187,12 @@ intvec_\vecname:
2:
/*
- * SYSTEM_SAVE_1_0 holds the cpu number in the low bits, and
+ * SYSTEM_SAVE_K_0 holds the cpu number in the low bits, and
* the current stack top in the higher bits. So we recover
* our stack top by just masking off the low bits, then
* point sp at the top aligned address on the actual stack page.
*/
- mfspr r0, SYSTEM_SAVE_1_0
+ mfspr r0, SPR_SYSTEM_SAVE_K_0
mm r0, r0, zero, LOG2_THREAD_SIZE, 31
0:
@@ -254,7 +254,7 @@ intvec_\vecname:
sw sp, r3
addli sp, sp, PTREGS_OFFSET_PC - PTREGS_OFFSET_REG(3)
}
- mfspr r0, EX_CONTEXT_1_0
+ mfspr r0, SPR_EX_CONTEXT_K_0
.ifc \processing,handle_syscall
/*
* Bump the saved PC by one bundle so that when we return, we won't
@@ -267,7 +267,7 @@ intvec_\vecname:
sw sp, r0
addli sp, sp, PTREGS_OFFSET_EX1 - PTREGS_OFFSET_PC
}
- mfspr r0, EX_CONTEXT_1_1
+ mfspr r0, SPR_EX_CONTEXT_K_1
{
sw sp, r0
addi sp, sp, PTREGS_OFFSET_FAULTNUM - PTREGS_OFFSET_EX1
@@ -289,7 +289,7 @@ intvec_\vecname:
.endif
addli sp, sp, PTREGS_OFFSET_REG(0) - PTREGS_OFFSET_FAULTNUM
}
- mfspr r0, SYSTEM_SAVE_1_1 /* Original r0 */
+ mfspr r0, SPR_SYSTEM_SAVE_K_1 /* Original r0 */
{
sw sp, r0
addi sp, sp, -PTREGS_OFFSET_REG(0) - 4
@@ -309,12 +309,12 @@ intvec_\vecname:
* See discussion below at "finish_interrupt_save".
*/
.ifc \c_routine, do_page_fault
- mfspr r2, SYSTEM_SAVE_1_3 /* address of page fault */
- mfspr r3, SYSTEM_SAVE_1_2 /* info about page fault */
+ mfspr r2, SPR_SYSTEM_SAVE_K_3 /* address of page fault */
+ mfspr r3, SPR_SYSTEM_SAVE_K_2 /* info about page fault */
.else
.ifc \vecnum, INT_DOUBLE_FAULT
{
- mfspr r2, SYSTEM_SAVE_1_2 /* double fault info from HV */
+ mfspr r2, SPR_SYSTEM_SAVE_K_2 /* double fault info from HV */
movei r3, 0
}
.else
@@ -467,7 +467,7 @@ intvec_\vecname:
/* Load tp with our per-cpu offset. */
#ifdef CONFIG_SMP
{
- mfspr r20, SYSTEM_SAVE_1_0
+ mfspr r20, SPR_SYSTEM_SAVE_K_0
moveli r21, lo16(__per_cpu_offset)
}
{
@@ -487,7 +487,7 @@ intvec_\vecname:
* We load flags in r32 here so we can jump to .Lrestore_regs
* directly after do_page_fault_ics() if necessary.
*/
- mfspr r32, EX_CONTEXT_1_1
+ mfspr r32, SPR_EX_CONTEXT_K_1
{
andi r32, r32, SPR_EX_CONTEXT_1_1__PL_MASK /* mask off ICS */
PTREGS_PTR(r21, PTREGS_OFFSET_FLAGS)
@@ -957,11 +957,11 @@ STD_ENTRY(interrupt_return)
pop_reg_zero r21, r3, sp, PTREGS_OFFSET_EX1 - PTREGS_OFFSET_PC
pop_reg_zero lr, r4, sp, PTREGS_OFFSET_REG(52) - PTREGS_OFFSET_EX1
{
- mtspr EX_CONTEXT_1_0, r21
+ mtspr SPR_EX_CONTEXT_K_0, r21
move r5, zero
}
{
- mtspr EX_CONTEXT_1_1, lr
+ mtspr SPR_EX_CONTEXT_K_1, lr
andi lr, lr, SPR_EX_CONTEXT_1_1__PL_MASK /* mask off ICS */
}
@@ -1199,7 +1199,7 @@ STD_ENTRY(interrupt_return)
STD_ENDPROC(interrupt_return)
/*
- * This interrupt variant clears the INT_INTCTRL_1 interrupt mask bit
+ * This interrupt variant clears the INT_INTCTRL_K interrupt mask bit
* before returning, so we can properly get more downcalls.
*/
.pushsection .text.handle_interrupt_downcall,"ax"
@@ -1208,11 +1208,11 @@ handle_interrupt_downcall:
check_single_stepping normal, .Ldispatch_downcall
.Ldispatch_downcall:
- /* Clear INTCTRL_1 from the set of interrupts we ever enable. */
+ /* Clear INTCTRL_K from the set of interrupts we ever enable. */
GET_INTERRUPTS_ENABLED_MASK_PTR(r30)
{
addi r30, r30, 4
- movei r31, INT_MASK(INT_INTCTRL_1)
+ movei r31, INT_MASK(INT_INTCTRL_K)
}
{
lw r20, r30
@@ -1227,7 +1227,7 @@ handle_interrupt_downcall:
}
FEEDBACK_REENTER(handle_interrupt_downcall)
- /* Allow INTCTRL_1 to be enabled next time we enable interrupts. */
+ /* Allow INTCTRL_K to be enabled next time we enable interrupts. */
lw r20, r30
or r20, r20, r31
sw r30, r20
@@ -1509,7 +1509,7 @@ handle_ill:
/* Various stub interrupt handlers and syscall handlers */
STD_ENTRY_LOCAL(_kernel_double_fault)
- mfspr r1, EX_CONTEXT_1_0
+ mfspr r1, SPR_EX_CONTEXT_K_0
move r2, lr
move r3, sp
move r4, r52
@@ -1518,7 +1518,7 @@ STD_ENTRY_LOCAL(_kernel_double_fault)
STD_ENDPROC(_kernel_double_fault)
STD_ENTRY_LOCAL(bad_intr)
- mfspr r2, EX_CONTEXT_1_0
+ mfspr r2, SPR_EX_CONTEXT_K_0
panic "Unhandled interrupt %#x: PC %#lx"
STD_ENDPROC(bad_intr)
@@ -1560,7 +1560,7 @@ STD_ENTRY(_sys_clone)
* a page fault which would assume the stack was valid, it does
* save/restore the stack pointer and zero it out to make sure it gets reset.
* Since we always keep interrupts disabled, the hypervisor won't
- * clobber our EX_CONTEXT_1_x registers, so we don't save/restore them
+ * clobber our EX_CONTEXT_K_x registers, so we don't save/restore them
* (other than to advance the PC on return).
*
* We have to manually validate the user vs kernel address range
@@ -1766,7 +1766,7 @@ ENTRY(sys_cmpxchg)
/* Do slow mtspr here so the following "mf" waits less. */
{
move sp, r27
- mtspr EX_CONTEXT_1_0, r28
+ mtspr SPR_EX_CONTEXT_K_0, r28
}
mf
@@ -1785,7 +1785,7 @@ ENTRY(sys_cmpxchg)
}
{
move sp, r27
- mtspr EX_CONTEXT_1_0, r28
+ mtspr SPR_EX_CONTEXT_K_0, r28
}
iret
@@ -1813,7 +1813,7 @@ ENTRY(sys_cmpxchg)
#endif
/* Issue the slow SPR here while the tns result is in flight. */
- mfspr r28, EX_CONTEXT_1_0
+ mfspr r28, SPR_EX_CONTEXT_K_0
{
addi r28, r28, 8 /* return to the instruction after the swint1 */
@@ -1901,7 +1901,7 @@ ENTRY(sys_cmpxchg)
.Lcmpxchg64_mismatch:
{
move sp, r27
- mtspr EX_CONTEXT_1_0, r28
+ mtspr SPR_EX_CONTEXT_K_0, r28
}
mf
{
@@ -1982,8 +1982,13 @@ int_unalign:
int_hand INT_PERF_COUNT, PERF_COUNT, \
op_handle_perf_interrupt, handle_nmi
int_hand INT_INTCTRL_3, INTCTRL_3, bad_intr
+#if CONFIG_KERNEL_PL == 2
+ dc_dispatch INT_INTCTRL_2, INTCTRL_2
+ int_hand INT_INTCTRL_1, INTCTRL_1, bad_intr
+#else
int_hand INT_INTCTRL_2, INTCTRL_2, bad_intr
dc_dispatch INT_INTCTRL_1, INTCTRL_1
+#endif
int_hand INT_INTCTRL_0, INTCTRL_0, bad_intr
int_hand INT_MESSAGE_RCV_DWNCL, MESSAGE_RCV_DWNCL, \
hv_message_intr, handle_interrupt_downcall
diff --git a/arch/tile/kernel/irq.c b/arch/tile/kernel/irq.c
index 596c6008693..394d554f21a 100644
--- a/arch/tile/kernel/irq.c
+++ b/arch/tile/kernel/irq.c
@@ -61,9 +61,9 @@ static DEFINE_SPINLOCK(available_irqs_lock);
#if CHIP_HAS_IPI()
/* Use SPRs to manipulate device interrupts. */
-#define mask_irqs(irq_mask) __insn_mtspr(SPR_IPI_MASK_SET_1, irq_mask)
-#define unmask_irqs(irq_mask) __insn_mtspr(SPR_IPI_MASK_RESET_1, irq_mask)
-#define clear_irqs(irq_mask) __insn_mtspr(SPR_IPI_EVENT_RESET_1, irq_mask)
+#define mask_irqs(irq_mask) __insn_mtspr(SPR_IPI_MASK_SET_K, irq_mask)
+#define unmask_irqs(irq_mask) __insn_mtspr(SPR_IPI_MASK_RESET_K, irq_mask)
+#define clear_irqs(irq_mask) __insn_mtspr(SPR_IPI_EVENT_RESET_K, irq_mask)
#else
/* Use HV to manipulate device interrupts. */
#define mask_irqs(irq_mask) hv_disable_intr(irq_mask)
@@ -89,16 +89,16 @@ void tile_dev_intr(struct pt_regs *regs, int intnum)
* masked by a previous interrupt. Then, mask out the ones
* we're going to handle.
*/
- unsigned long masked = __insn_mfspr(SPR_IPI_MASK_1);
- original_irqs = __insn_mfspr(SPR_IPI_EVENT_1) & ~masked;
- __insn_mtspr(SPR_IPI_MASK_SET_1, original_irqs);
+ unsigned long masked = __insn_mfspr(SPR_IPI_MASK_K);
+ original_irqs = __insn_mfspr(SPR_IPI_EVENT_K) & ~masked;
+ __insn_mtspr(SPR_IPI_MASK_SET_K, original_irqs);
#else
/*
* Hypervisor performs the equivalent of the Gx code above and
* then puts the pending interrupt mask into a system save reg
* for us to find.
*/
- original_irqs = __insn_mfspr(SPR_SYSTEM_SAVE_1_3);
+ original_irqs = __insn_mfspr(SPR_SYSTEM_SAVE_K_3);
#endif
remaining_irqs = original_irqs;
@@ -225,7 +225,7 @@ void __cpuinit setup_irq_regs(void)
/* Enable interrupt delivery. */
unmask_irqs(~0UL);
#if CHIP_HAS_IPI()
- raw_local_irq_unmask(INT_IPI_1);
+ raw_local_irq_unmask(INT_IPI_K);
#endif
}
diff --git a/arch/tile/kernel/messaging.c b/arch/tile/kernel/messaging.c
index 6d23ed271d1..997e3933f72 100644
--- a/arch/tile/kernel/messaging.c
+++ b/arch/tile/kernel/messaging.c
@@ -34,7 +34,7 @@ void __cpuinit init_messaging(void)
panic("hv_register_message_state: error %d", rc);
/* Make sure downcall interrupts will be enabled. */
- raw_local_irq_unmask(INT_INTCTRL_1);
+ raw_local_irq_unmask(INT_INTCTRL_K);
}
void hv_message_intr(struct pt_regs *regs, int intnum)
diff --git a/arch/tile/kernel/process.c b/arch/tile/kernel/process.c
index 221f12bd27f..8430f45daea 100644
--- a/arch/tile/kernel/process.c
+++ b/arch/tile/kernel/process.c
@@ -305,15 +305,25 @@ int dump_task_regs(struct task_struct *tsk, elf_gregset_t *regs)
/* Allow user processes to access the DMA SPRs */
void grant_dma_mpls(void)
{
+#if CONFIG_KERNEL_PL == 2
+ __insn_mtspr(SPR_MPL_DMA_CPL_SET_1, 1);
+ __insn_mtspr(SPR_MPL_DMA_NOTIFY_SET_1, 1);
+#else
__insn_mtspr(SPR_MPL_DMA_CPL_SET_0, 1);
__insn_mtspr(SPR_MPL_DMA_NOTIFY_SET_0, 1);
+#endif
}
/* Forbid user processes from accessing the DMA SPRs */
void restrict_dma_mpls(void)
{
+#if CONFIG_KERNEL_PL == 2
+ __insn_mtspr(SPR_MPL_DMA_CPL_SET_2, 1);
+ __insn_mtspr(SPR_MPL_DMA_NOTIFY_SET_2, 1);
+#else
__insn_mtspr(SPR_MPL_DMA_CPL_SET_1, 1);
__insn_mtspr(SPR_MPL_DMA_NOTIFY_SET_1, 1);
+#endif
}
/* Pause the DMA engine, then save off its state registers. */
@@ -524,7 +534,7 @@ struct task_struct *__sched _switch_to(struct task_struct *prev,
* Switch kernel SP, PC, and callee-saved registers.
* In the context of the new task, return the old task pointer
* (i.e. the task that actually called __switch_to).
- * Pass the value to use for SYSTEM_SAVE_1_0 when we reset our sp.
+ * Pass the value to use for SYSTEM_SAVE_K_0 when we reset our sp.
*/
return __switch_to(prev, next, next_current_ksp0(next));
}
diff --git a/arch/tile/kernel/regs_32.S b/arch/tile/kernel/regs_32.S
index e88d6e12278..caa13101c26 100644
--- a/arch/tile/kernel/regs_32.S
+++ b/arch/tile/kernel/regs_32.S
@@ -85,7 +85,7 @@ STD_ENTRY_SECTION(__switch_to, .sched.text)
{
/* Update sp and ksp0 simultaneously to avoid backtracer warnings. */
move sp, r13
- mtspr SYSTEM_SAVE_1_0, r2
+ mtspr SPR_SYSTEM_SAVE_K_0, r2
}
FOR_EACH_CALLEE_SAVED_REG(LOAD_REG)
.L__switch_to_pc:
diff --git a/arch/tile/kernel/setup.c b/arch/tile/kernel/setup.c
index c1a697e6854..6444a2bbe1a 100644
--- a/arch/tile/kernel/setup.c
+++ b/arch/tile/kernel/setup.c
@@ -187,11 +187,11 @@ early_param("vmalloc", parse_vmalloc);
#ifdef CONFIG_HIGHMEM
/*
- * Determine for each controller where its lowmem is mapped and how
- * much of it is mapped there. On controller zero, the first few
- * megabytes are mapped at 0xfd000000 as code, so in principle we
- * could start our data mappings higher up, but for now we don't
- * bother, to avoid additional confusion.
+ * Determine for each controller where its lowmem is mapped and how much of
+ * it is mapped there. On controller zero, the first few megabytes are
+ * already mapped in as code at MEM_SV_INTRPT, so in principle we could
+ * start our data mappings higher up, but for now we don't bother, to avoid
+ * additional confusion.
*
* One question is whether, on systems with more than 768 Mb and
* controllers of different sizes, to map in a proportionate amount of
@@ -876,6 +876,9 @@ void __cpuinit setup_cpu(int boot)
#if CHIP_HAS_SN_PROC()
raw_local_irq_unmask(INT_SNITLB_MISS);
#endif
+#ifdef __tilegx__
+ raw_local_irq_unmask(INT_SINGLE_STEP_K);
+#endif
/*
* Allow user access to many generic SPRs, like the cycle
@@ -893,11 +896,12 @@ void __cpuinit setup_cpu(int boot)
#endif
/*
- * Set the MPL for interrupt control 0 to user level.
- * This includes access to the SYSTEM_SAVE and EX_CONTEXT SPRs,
- * as well as the PL 0 interrupt mask.
+ * Set the MPL for interrupt control 0 & 1 to the corresponding
+ * values. This includes access to the SYSTEM_SAVE and EX_CONTEXT
+ * SPRs, as well as the interrupt mask.
*/
__insn_mtspr(SPR_MPL_INTCTRL_0_SET_0, 1);
+ __insn_mtspr(SPR_MPL_INTCTRL_1_SET_1, 1);
/* Initialize IRQ support for this cpu. */
setup_irq_regs();
@@ -1033,7 +1037,7 @@ static void __init validate_va(void)
* In addition, make sure we CAN'T use the end of memory, since
* we use the last chunk of each pgd for the pgd_list.
*/
- int i, fc_fd_ok = 0;
+ int i, user_kernel_ok = 0;
unsigned long max_va = 0;
unsigned long list_va =
((PGD_LIST_OFFSET / sizeof(pgd_t)) << PGDIR_SHIFT);
@@ -1044,13 +1048,13 @@ static void __init validate_va(void)
break;
if (range.start <= MEM_USER_INTRPT &&
range.start + range.size >= MEM_HV_INTRPT)
- fc_fd_ok = 1;
+ user_kernel_ok = 1;
if (range.start == 0)
max_va = range.size;
BUG_ON(range.start + range.size > list_va);
}
- if (!fc_fd_ok)
- early_panic("Hypervisor not configured for VAs 0xfc/0xfd\n");
+ if (!user_kernel_ok)
+ early_panic("Hypervisor not configured for user/kernel VAs\n");
if (max_va == 0)
early_panic("Hypervisor not configured for low VAs\n");
if (max_va < KERNEL_HIGH_VADDR)
diff --git a/arch/tile/kernel/smp.c b/arch/tile/kernel/smp.c
index 1cb5ec79de0..75255d90aff 100644
--- a/arch/tile/kernel/smp.c
+++ b/arch/tile/kernel/smp.c
@@ -212,7 +212,7 @@ void __init ipi_init(void)
tile.x = cpu_x(cpu);
tile.y = cpu_y(cpu);
- if (hv_get_ipi_pte(tile, 1, &pte) != 0)
+ if (hv_get_ipi_pte(tile, KERNEL_PL, &pte) != 0)
panic("Failed to initialize IPI for cpu %d\n", cpu);
offset = hv_pte_get_pfn(pte) << PAGE_SHIFT;
diff --git a/arch/tile/kernel/traps.c b/arch/tile/kernel/traps.c
index 0f362dc2c57..7826a8b1799 100644
--- a/arch/tile/kernel/traps.c
+++ b/arch/tile/kernel/traps.c
@@ -278,7 +278,7 @@ void __kprobes do_trap(struct pt_regs *regs, int fault_num,
case INT_DOUBLE_FAULT:
/*
* For double fault, "reason" is actually passed as
- * SYSTEM_SAVE_1_2, the hypervisor's double-fault info, so
+ * SYSTEM_SAVE_K_2, the hypervisor's double-fault info, so
* we can provide the original fault number rather than
* the uninteresting "INT_DOUBLE_FAULT" so the user can
* learn what actually struck while PL0 ICS was set.
diff --git a/arch/tile/kvm/Kconfig b/arch/tile/kvm/Kconfig
new file mode 100644
index 00000000000..b88f9c04778
--- /dev/null
+++ b/arch/tile/kvm/Kconfig
@@ -0,0 +1,38 @@
+#
+# KVM configuration
+#
+
+source "virt/kvm/Kconfig"
+
+menuconfig VIRTUALIZATION
+ bool "Virtualization"
+ ---help---
+ Say Y here to get to see options for using your Linux host to run
+ other operating systems inside virtual machines (guests).
+ This option alone does not add any kernel code.
+
+ If you say N, all options in this submenu will be skipped and
+ disabled.
+
+if VIRTUALIZATION
+
+config KVM
+ tristate "Kernel-based Virtual Machine (KVM) support"
+ depends on HAVE_KVM && MODULES && EXPERIMENTAL
+ select PREEMPT_NOTIFIERS
+ select ANON_INODES
+ ---help---
+ Support hosting paravirtualized guest machines.
+
+ This module provides access to the hardware capabilities through
+ a character device node named /dev/kvm.
+
+ To compile this as a module, choose M here: the module
+ will be called kvm.
+
+ If unsure, say N.
+
+source drivers/vhost/Kconfig
+source drivers/virtio/Kconfig
+
+endif # VIRTUALIZATION
diff --git a/arch/tile/mm/fault.c b/arch/tile/mm/fault.c
index 94f579d0a49..f295b4ac941 100644
--- a/arch/tile/mm/fault.c
+++ b/arch/tile/mm/fault.c
@@ -563,10 +563,10 @@ do_sigbus:
/*
* When we take an ITLB or DTLB fault or access violation in the
* supervisor while the critical section bit is set, the hypervisor is
- * reluctant to write new values into the EX_CONTEXT_1_x registers,
+ * reluctant to write new values into the EX_CONTEXT_K_x registers,
* since that might indicate we have not yet squirreled the SPR
* contents away and can thus safely take a recursive interrupt.
- * Accordingly, the hypervisor passes us the PC via SYSTEM_SAVE_1_2.
+ * Accordingly, the hypervisor passes us the PC via SYSTEM_SAVE_K_2.
*
* Note that this routine is called before homecache_tlb_defer_enter(),
* which means that we can properly unlock any atomics that might
@@ -610,7 +610,7 @@ struct intvec_state do_page_fault_ics(struct pt_regs *regs, int fault_num,
* fault. We didn't set up a kernel stack on initial entry to
* sys_cmpxchg, but instead had one set up by the fault, which
* (because sys_cmpxchg never releases ICS) came to us via the
- * SYSTEM_SAVE_1_2 mechanism, and thus EX_CONTEXT_1_[01] are
+ * SYSTEM_SAVE_K_2 mechanism, and thus EX_CONTEXT_K_[01] are
* still referencing the original user code. We release the
* atomic lock and rewrite pt_regs so that it appears that we
* came from user-space directly, and after we finish the
diff --git a/arch/tile/mm/init.c b/arch/tile/mm/init.c
index d89c9eacd16..78e1982cb6c 100644
--- a/arch/tile/mm/init.c
+++ b/arch/tile/mm/init.c
@@ -1060,7 +1060,7 @@ void free_initmem(void)
/*
* Free the pages mapped from 0xc0000000 that correspond to code
- * pages from 0xfd000000 that we won't use again after init.
+ * pages from MEM_SV_INTRPT that we won't use again after init.
*/
free_init_pages("unused kernel text",
(unsigned long)_sinittext - text_delta,