[PATCH] uml: separate libc-dependent early initialization

The serial UML OS-abstraction layer patch (um/kernel dir).

This moves all systemcalls from main.c file under os-Linux dir and joins mem.c
and um_arch.c files.

Signed-off-by: Gennady Sharapov <Gennady.V.Sharapov@intel.com>
Signed-off-by: Jeff Dike <jdike@addtoit.com>
Cc: Paolo Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2 files changed, 2 insertions, 272 deletions

diff --git a/arch/um/kernel/Makefile b/arch/um/kernel/Makefile
index 72fd4eada9c..f9858583863 100644
--- a/arch/um/kernel/Makefile
+++ b/arch/um/kernel/Makefile
@@ -7,7 +7,7 @@ extra-y := vmlinux.lds
 clean-files :=
 
 obj-y = config.o exec_kern.o exitcode.o \
-	helper.o init_task.o irq.o irq_user.o ksyms.o main.o mem.o physmem.o \
+	helper.o init_task.o irq.o irq_user.o ksyms.o mem.o physmem.o \
 	process_kern.o ptrace.o reboot.o resource.o sigio_user.o sigio_kern.o \
 	signal_kern.o signal_user.o smp.o syscall_kern.o sysrq.o time.o \
 	time_kern.o tlb.o trap_kern.o trap_user.o uaccess.o um_arch.o \
@@ -24,7 +24,7 @@ obj-$(CONFIG_MODE_SKAS) += skas/
 
 user-objs-$(CONFIG_TTY_LOG) += tty_log.o
 
-USER_OBJS := $(user-objs-y) config.o helper.o main.o time.o tty_log.o umid.o \
+USER_OBJS := $(user-objs-y) config.o helper.o time.o tty_log.o umid.o \
 	user_util.o
 
 include arch/um/scripts/Makefile.rules
diff --git a/arch/um/kernel/main.c b/arch/um/kernel/main.c
deleted file mode 100644
index d31027f0fe3..00000000000
--- a/arch/um/kernel/main.c
+++ /dev/null
@@ -1,270 +0,0 @@
-/*
- * Copyright (C) 2000, 2001 Jeff Dike (jdike@karaya.com)
- * Licensed under the GPL
- */
-
-#include <unistd.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <signal.h>
-#include <errno.h>
-#include <sys/resource.h>
-#include <sys/mman.h>
-#include <sys/user.h>
-#include <asm/page.h>
-#include "user_util.h"
-#include "kern_util.h"
-#include "mem_user.h"
-#include "signal_user.h"
-#include "time_user.h"
-#include "irq_user.h"
-#include "user.h"
-#include "init.h"
-#include "mode.h"
-#include "choose-mode.h"
-#include "uml-config.h"
-#include "os.h"
-
-/* Set in set_stklim, which is called from main and __wrap_malloc.
- * __wrap_malloc only calls it if main hasn't started.
- */
-unsigned long stacksizelim;
-
-/* Set in main */
-char *linux_prog;
-
-#define PGD_BOUND (4 * 1024 * 1024)
-#define STACKSIZE (8 * 1024 * 1024)
-#define THREAD_NAME_LEN (256)
-
-static void set_stklim(void)
-{
-	struct rlimit lim;
-
-	if(getrlimit(RLIMIT_STACK, &lim) < 0){
-		perror("getrlimit");
-		exit(1);
-	}
-	if((lim.rlim_cur == RLIM_INFINITY) || (lim.rlim_cur > STACKSIZE)){
-		lim.rlim_cur = STACKSIZE;
-		if(setrlimit(RLIMIT_STACK, &lim) < 0){
-			perror("setrlimit");
-			exit(1);
-		}
-	}
-	stacksizelim = (lim.rlim_cur + PGD_BOUND - 1) & ~(PGD_BOUND - 1);
-}
-
-static __init void do_uml_initcalls(void)
-{
-	initcall_t *call;
-
-	call = &__uml_initcall_start;
-	while (call < &__uml_initcall_end){;
-		(*call)();
-		call++;
-	}
-}
-
-static void last_ditch_exit(int sig)
-{
-	signal(SIGINT, SIG_DFL);
-	signal(SIGTERM, SIG_DFL);
-	signal(SIGHUP, SIG_DFL);
-	uml_cleanup();
-	exit(1);
-}
-
-extern int uml_exitcode;
-
-extern void scan_elf_aux( char **envp);
-
-int main(int argc, char **argv, char **envp)
-{
-	char **new_argv;
-	sigset_t mask;
-	int ret, i, err;
-
-	/* Enable all signals except SIGIO - in some environments, we can
-	 * enter with some signals blocked
-	 */
-
-	sigemptyset(&mask);
-	sigaddset(&mask, SIGIO);
-	if(sigprocmask(SIG_SETMASK, &mask, NULL) < 0){
-		perror("sigprocmask");
-		exit(1);
-	}
-
-#ifdef UML_CONFIG_CMDLINE_ON_HOST
-	/* Allocate memory for thread command lines */
-	if(argc < 2 || strlen(argv[1]) < THREAD_NAME_LEN - 1){
-
-		char padding[THREAD_NAME_LEN] = {
-			[ 0 ...  THREAD_NAME_LEN - 2] = ' ', '\0'
-		};
-
-		new_argv = malloc((argc + 2) * sizeof(char*));
-		if(!new_argv) {
-			perror("Allocating extended argv");
-			exit(1);
-		}
-
-		new_argv[0] = argv[0];
-		new_argv[1] = padding;
-
-		for(i = 2; i <= argc; i++)
-			new_argv[i] = argv[i - 1];
-		new_argv[argc + 1] = NULL;
-
-		execvp(new_argv[0], new_argv);
-		perror("execing with extended args");
-		exit(1);
-	}
-#endif
-
-	linux_prog = argv[0];
-
-	set_stklim();
-
-	new_argv = malloc((argc + 1) * sizeof(char *));
-	if(new_argv == NULL){
-		perror("Mallocing argv");
-		exit(1);
-	}
-	for(i=0;i<argc;i++){
-		new_argv[i] = strdup(argv[i]);
-		if(new_argv[i] == NULL){
-			perror("Mallocing an arg");
-			exit(1);
-		}
-	}
-	new_argv[argc] = NULL;
-
-	set_handler(SIGINT, last_ditch_exit, SA_ONESHOT | SA_NODEFER, -1);
-	set_handler(SIGTERM, last_ditch_exit, SA_ONESHOT | SA_NODEFER, -1);
-	set_handler(SIGHUP, last_ditch_exit, SA_ONESHOT | SA_NODEFER, -1);
-
-	scan_elf_aux( envp);
-
-	do_uml_initcalls();
-	ret = linux_main(argc, argv);
-
-	/* Disable SIGPROF - I have no idea why libc doesn't do this or turn
-	 * off the profiling time, but UML dies with a SIGPROF just before
-	 * exiting when profiling is active.
-	 */
-	change_sig(SIGPROF, 0);
-
-        /* This signal stuff used to be in the reboot case.  However,
-         * sometimes a SIGVTALRM can come in when we're halting (reproducably
-         * when writing out gcov information, presumably because that takes
-         * some time) and cause a segfault.
-         */
-
-        /* stop timers and set SIG*ALRM to be ignored */
-        disable_timer();
-
-        /* disable SIGIO for the fds and set SIGIO to be ignored */
-        err = deactivate_all_fds();
-        if(err)
-                printf("deactivate_all_fds failed, errno = %d\n", -err);
-
-        /* Let any pending signals fire now.  This ensures
-         * that they won't be delivered after the exec, when
-         * they are definitely not expected.
-         */
-        unblock_signals();
-
-	/* Reboot */
-	if(ret){
-		printf("\n");
-		execvp(new_argv[0], new_argv);
-		perror("Failed to exec kernel");
-		ret = 1;
-	}
-	printf("\n");
-	return(uml_exitcode);
-}
-
-#define CAN_KMALLOC() \
-	(kmalloc_ok && CHOOSE_MODE((os_getpid() != tracing_pid), 1))
-
-extern void *__real_malloc(int);
-
-void *__wrap_malloc(int size)
-{
-	void *ret;
-
-	if(!CAN_KMALLOC())
-		return(__real_malloc(size));
-	else if(size <= PAGE_SIZE) /* finding contiguos pages can be hard*/
-		ret = um_kmalloc(size);
-	else ret = um_vmalloc(size);
-
-	/* glibc people insist that if malloc fails, errno should be
-	 * set by malloc as well. So we do.
-	 */
-	if(ret == NULL)
-		errno = ENOMEM;
-
-	return(ret);
-}
-
-void *__wrap_calloc(int n, int size)
-{
-	void *ptr = __wrap_malloc(n * size);
-
-	if(ptr == NULL) return(NULL);
-	memset(ptr, 0, n * size);
-	return(ptr);
-}
-
-extern void __real_free(void *);
-
-extern unsigned long high_physmem;
-
-void __wrap_free(void *ptr)
-{
-	unsigned long addr = (unsigned long) ptr;
-
-	/* We need to know how the allocation happened, so it can be correctly
-	 * freed.  This is done by seeing what region of memory the pointer is
-	 * in -
-	 * 	physical memory - kmalloc/kfree
-	 *	kernel virtual memory - vmalloc/vfree
-	 * 	anywhere else - malloc/free
-	 * If kmalloc is not yet possible, then either high_physmem and/or
-	 * end_vm are still 0 (as at startup), in which case we call free, or
-	 * we have set them, but anyway addr has not been allocated from those
-	 * areas. So, in both cases __real_free is called.
-	 *
-	 * CAN_KMALLOC is checked because it would be bad to free a buffer
-	 * with kmalloc/vmalloc after they have been turned off during
-	 * shutdown.
-	 * XXX: However, we sometimes shutdown CAN_KMALLOC temporarily, so
-	 * there is a possibility for memory leaks.
-	 */
-
-	if((addr >= uml_physmem) && (addr < high_physmem)){
-		if(CAN_KMALLOC())
-			kfree(ptr);
-	}
-	else if((addr >= start_vm) && (addr < end_vm)){
-		if(CAN_KMALLOC())
-			vfree(ptr);
-	}
-	else __real_free(ptr);
-}
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only.  This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */