Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 49 insertions, 0 deletions

diff --git a/arch/v850/kernel/as85ep1.ld b/arch/v850/kernel/as85ep1.ld
new file mode 100644
index 00000000000..ef2c4399063
--- /dev/null
+++ b/arch/v850/kernel/as85ep1.ld
@@ -0,0 +1,49 @@
+/* Linker script for the NEC AS85EP1 V850E evaluation board
+   (CONFIG_V850E_AS85EP1).  */
+
+MEMORY {
+	/* 1MB of internal instruction memory. */
+	iMEM0 : ORIGIN = 0,	     LENGTH = 0x00100000
+
+	/* 1MB of static RAM.  */
+	SRAM  : ORIGIN = SRAM_ADDR,  LENGTH = SRAM_SIZE
+
+	/* About 58MB of DRAM.  This can actually be at one of two
+	   positions, determined by jump JP3; we have to use the first
+	   position because the second is partially out of processor
+	   instruction addressing range (though in the second position
+	   there's actually 64MB available).  */
+	SDRAM : ORIGIN = SDRAM_ADDR, LENGTH = SDRAM_SIZE
+}
+
+SECTIONS {
+	.resetv : {
+		__intv_start = . ;
+			*(.intv.reset)	/* Reset vector */
+	} > iMEM0
+
+	.sram : {
+		RAMK_KRAM_CONTENTS
+
+		/* We stick most of the interrupt vectors here; they'll be
+		   copied into the proper location by the early init code (we
+		   can't put them directly in the right place because of
+		   hardware bugs).  The vectors shouldn't need to be
+		   relocated, so we don't have to use `> ...  AT> ...' to
+		   split the load/vm addresses (and we can't because of
+		   problems with the loader).  */
+		. = ALIGN (0x10) ;
+		__intv_copy_src_start = . ;
+			*(.intv.common)	/* Vectors common to all v850e proc. */
+			*(.intv.mach)	/* Machine-specific int. vectors.  */
+		. = ALIGN (0x10) ;
+		__intv_copy_src_end = . ;
+	} > SRAM
+
+	/* Where we end up putting the vectors.  */
+	__intv_copy_dst_start = 0x10 ;
+	__intv_copy_dst_end = __intv_copy_dst_start + (__intv_copy_src_end - __intv_copy_src_start) ;
+	__intv_end = __intv_copy_dst_end ;
+
+	.root : { ROOT_FS_CONTENTS } > SDRAM
+}