Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 171 insertions, 0 deletions

diff --git a/arch/v850/kernel/fpga85e2c.c b/arch/v850/kernel/fpga85e2c.c
new file mode 100644
index 00000000000..4bac5149b3c
--- /dev/null
+++ b/arch/v850/kernel/fpga85e2c.c
@@ -0,0 +1,171 @@
+/*
+ * arch/v850/kernel/fpga85e2c.h -- Machine-dependent defs for
+ *	FPGA implementation of V850E2/NA85E2C
+ *
+ *  Copyright (C) 2002,03  NEC Electronics Corporation
+ *  Copyright (C) 2002,03  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/swap.h>
+#include <linux/bootmem.h>
+#include <linux/irq.h>
+#include <linux/bitops.h>
+
+#include <asm/atomic.h>
+#include <asm/page.h>
+#include <asm/machdep.h>
+
+#include "mach.h"
+
+extern void memcons_setup (void);
+
+
+#define REG_DUMP_ADDR		0x220000
+
+
+extern struct irqaction reg_snap_action; /* fwd decl */
+
+
+void __init mach_early_init (void)
+{
+	int i;
+	const u32 *src;
+	register u32 *dst asm ("ep");
+	extern u32 _intv_end, _intv_load_start;
+
+	/* Set bus sizes: CS0 32-bit, CS1 16-bit, CS7 8-bit,
+	   everything else 32-bit.  */
+	V850E2_BSC = 0x2AA6;
+	for (i = 2; i <= 6; i++)
+		CSDEV(i) = 0;	/* 32 bit */
+
+	/* Ensure that the simulator halts on a panic, instead of going
+	   into an infinite loop inside the panic function.  */
+	panic_timeout = -1;
+
+	/* Move the interrupt vectors into their real location.  Note that
+	   any relocations there are relative to the real location, so we
+	   don't have to fix anything up.  We use a loop instead of calling
+	   memcpy to keep this a leaf function (to avoid a function
+	   prologue being generated).  */
+	dst = 0x10;		/* &_intv_start + 0x10.  */
+	src = &_intv_load_start;
+	do {
+		u32 t0 = src[0], t1 = src[1], t2 = src[2], t3 = src[3];
+		u32 t4 = src[4], t5 = src[5], t6 = src[6], t7 = src[7];
+		dst[0] = t0; dst[1] = t1; dst[2] = t2; dst[3] = t3;
+		dst[4] = t4; dst[5] = t5; dst[6] = t6; dst[7] = t7;
+		dst += 8;
+		src += 8;
+	} while (dst < &_intv_end);
+}
+
+void __init mach_setup (char **cmdline)
+{
+	memcons_setup ();
+
+	/* Setup up NMI0 to copy the registers to a known memory location.
+	   The FGPA board has a button that produces NMI0 when pressed, so
+	   this allows us to push the button, and then look at memory to see
+	   what's in the registers (there's no other way to easily do so).
+	   We have to use `setup_irq' instead of `request_irq' because it's
+	   still too early to do memory allocation.  */
+	setup_irq (IRQ_NMI (0), &reg_snap_action);
+}
+
+void mach_get_physical_ram (unsigned long *ram_start, unsigned long *ram_len)
+{
+	*ram_start = ERAM_ADDR;
+	*ram_len = ERAM_SIZE;
+}
+
+void __init mach_sched_init (struct irqaction *timer_action)
+{
+	/* Setup up the timer interrupt.  The FPGA peripheral control
+	   registers _only_ work with single-bit writes (set1/clr1)!  */
+	__clear_bit (RPU_GTMC_CE_BIT, &RPU_GTMC);
+	__clear_bit (RPU_GTMC_CLK_BIT, &RPU_GTMC);
+	__set_bit (RPU_GTMC_CE_BIT, &RPU_GTMC);
+
+	/* We use the first RPU interrupt, which occurs every 8.192ms.  */
+	setup_irq (IRQ_RPU (0), timer_action);
+}
+
+
+void mach_gettimeofday (struct timespec *tv)
+{
+	tv->tv_sec = 0;
+	tv->tv_nsec = 0;
+}
+
+void machine_halt (void) __attribute__ ((noreturn));
+void machine_halt (void)
+{
+	for (;;) {
+		DWC(0) = 0x7777;
+		DWC(1) = 0x7777;
+		ASC = 0xffff;
+		FLGREG(0) = 1;	/* Halt immediately.  */
+		asm ("di; halt; nop; nop; nop; nop; nop");
+	}
+}
+
+EXPORT_SYMBOL(machine_halt);
+
+void machine_restart (char *__unused)
+{
+	machine_halt ();
+}
+
+EXPORT_SYMBOL(machine_restart);
+
+void machine_power_off (void)
+{
+	machine_halt ();
+}
+
+EXPORT_SYMBOL(machine_power_off);
+
+
+/* Interrupts */
+
+struct v850e_intc_irq_init irq_inits[] = {
+	{ "IRQ", 0, 		NUM_MACH_IRQS,	1, 7 },
+	{ "RPU", IRQ_RPU(0),	IRQ_RPU_NUM,	1, 6 },
+	{ 0 }
+};
+#define NUM_IRQ_INITS ((sizeof irq_inits / sizeof irq_inits[0]) - 1)
+
+struct hw_interrupt_type hw_itypes[NUM_IRQ_INITS];
+
+/* Initialize interrupts.  */
+void __init mach_init_irqs (void)
+{
+	v850e_intc_init_irq_types (irq_inits, hw_itypes);
+}
+
+
+/* An interrupt handler that copies the registers to a known memory location,
+   for debugging purposes.  */
+
+static void make_reg_snap (int irq, void *dummy, struct pt_regs *regs)
+{
+	(*(unsigned *)REG_DUMP_ADDR)++;
+	(*(struct pt_regs *)(REG_DUMP_ADDR + sizeof (unsigned))) = *regs;
+}
+
+static int reg_snap_dev_id;
+static struct irqaction reg_snap_action = {
+	make_reg_snap, 0, CPU_MASK_NONE, "reg_snap", &reg_snap_dev_id, 0
+};