Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 200 insertions, 0 deletions

diff --git a/arch/v850/kernel/rte_cb.c b/arch/v850/kernel/rte_cb.c
new file mode 100644
index 00000000000..7ba397f77ac
--- /dev/null
+++ b/arch/v850/kernel/rte_cb.c
@@ -0,0 +1,200 @@
+/*
+ * include/asm-v850/rte_cb.c -- Midas lab RTE-CB series of evaluation boards
+ *
+ *  Copyright (C) 2001,02,03  NEC Electronics Corporation
+ *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/fs.h>
+#include <linux/module.h>
+
+#include <asm/machdep.h>
+#include <asm/v850e_uart.h>
+
+#include "mach.h"
+
+static void led_tick (void);
+
+/* LED access routines.  */
+extern unsigned read_leds (int pos, char *buf, int len);
+extern unsigned write_leds (int pos, const char *buf, int len);
+
+#ifdef CONFIG_RTE_CB_MULTI
+extern void multi_init (void);
+#endif
+
+
+void __init rte_cb_early_init (void)
+{
+	v850e_intc_disable_irqs ();
+
+#ifdef CONFIG_RTE_CB_MULTI
+	multi_init ();
+#endif
+}
+
+void __init mach_setup (char **cmdline)
+{
+#ifdef CONFIG_RTE_MB_A_PCI
+	/* Probe for Mother-A, and print a message if we find it.  */
+	*(volatile unsigned long *)MB_A_SRAM_ADDR = 0xDEADBEEF;
+	if (*(volatile unsigned long *)MB_A_SRAM_ADDR == 0xDEADBEEF) {
+		*(volatile unsigned long *)MB_A_SRAM_ADDR = 0x12345678;
+		if (*(volatile unsigned long *)MB_A_SRAM_ADDR == 0x12345678)
+			printk (KERN_INFO
+				"          NEC SolutionGear/Midas lab"
+				" RTE-MOTHER-A motherboard\n");
+	}
+#endif /* CONFIG_RTE_MB_A_PCI */
+
+	mach_tick = led_tick;
+}
+
+void machine_restart (char *__unused)
+{
+#ifdef CONFIG_RESET_GUARD
+	disable_reset_guard ();
+#endif
+	asm ("jmp r0"); /* Jump to the reset vector.  */
+}
+
+EXPORT_SYMBOL(machine_restart);
+
+/* This says `HALt.' in LEDese.  */
+static unsigned char halt_leds_msg[] = { 0x76, 0x77, 0x38, 0xF8 };
+
+void machine_halt (void)
+{
+#ifdef CONFIG_RESET_GUARD
+	disable_reset_guard ();
+#endif
+
+	/* Ignore all interrupts.  */
+	local_irq_disable ();
+
+	/* Write a little message.  */
+	write_leds (0, halt_leds_msg, sizeof halt_leds_msg);
+
+	/* Really halt.  */
+	for (;;)
+		asm ("halt; nop; nop; nop; nop; nop");
+}
+
+EXPORT_SYMBOL(machine_halt);
+
+void machine_power_off (void)
+{
+	machine_halt ();
+}
+
+EXPORT_SYMBOL(machine_power_off);
+
+
+/* Animated LED display for timer tick.  */
+
+#define TICK_UPD_FREQ	6
+static int tick_frames[][10] = {
+	{ 0x01, 0x02, 0x04, 0x08, 0x10, 0x20, -1 },
+	{ 0x63, 0x5c, -1 },
+	{ 0x5c, 0x00, -1 },
+	{ 0x63, 0x00, -1 },
+	{ -1 }
+};
+
+static void led_tick ()
+{
+	static unsigned counter = 0;
+	
+	if (++counter == (HZ / TICK_UPD_FREQ)) {
+		/* Which frame we're currently displaying for each digit.  */
+		static unsigned frame_nums[LED_NUM_DIGITS] = { 0 };
+		/* Display image.  */
+		static unsigned char image[LED_NUM_DIGITS] = { 0 };
+		unsigned char prev_image[LED_NUM_DIGITS];
+		int write_to_leds = 1; /* true if we should actually display */
+		int digit;
+
+		/* We check to see if the physical LEDs contains what we last
+		   wrote to them; if not, we suppress display (this is so that
+		   users can write to the LEDs, and not have their output
+		   overwritten).  As a special case, we start writing again if
+		   all the LEDs are blank, or our display image is all zeros
+		   (indicating that this is the initial update, when the actual
+		   LEDs might contain random data).  */
+		read_leds (0, prev_image, LED_NUM_DIGITS);
+		for (digit = 0; digit < LED_NUM_DIGITS; digit++)
+			if (image[digit] != prev_image[digit]
+			    && image[digit] && prev_image[digit])
+			{
+				write_to_leds = 0;
+				break;
+			}
+
+		/* Update display image.  */
+		for (digit = 0;
+		     digit < LED_NUM_DIGITS && tick_frames[digit][0] >= 0;
+		     digit++)
+		{
+			int frame = tick_frames[digit][frame_nums[digit]];
+			if (frame < 0) {
+				image[digit] = tick_frames[digit][0];
+				frame_nums[digit] = 1;
+			} else {
+				image[digit] = frame;
+				frame_nums[digit]++;
+				break;
+			}
+		}
+
+		if (write_to_leds)
+			/* Write the display image to the physical LEDs.  */
+			write_leds (0, image, LED_NUM_DIGITS);
+
+		counter = 0;
+	}
+}
+
+
+/* Mother-A interrupts.  */
+
+#ifdef CONFIG_RTE_GBUS_INT
+
+#define L GBUS_INT_PRIORITY_LOW
+#define M GBUS_INT_PRIORITY_MEDIUM
+#define H GBUS_INT_PRIORITY_HIGH
+
+static struct gbus_int_irq_init gbus_irq_inits[] = {
+#ifdef CONFIG_RTE_MB_A_PCI
+	{ "MB_A_LAN",	IRQ_MB_A_LAN,		1,		     1, L },
+	{ "MB_A_PCI1",	IRQ_MB_A_PCI1(0),	IRQ_MB_A_PCI1_NUM,   1, L },
+	{ "MB_A_PCI2",	IRQ_MB_A_PCI2(0),	IRQ_MB_A_PCI2_NUM,   1, L },
+	{ "MB_A_EXT",	IRQ_MB_A_EXT(0),	IRQ_MB_A_EXT_NUM,    1, L },
+	{ "MB_A_USB_OC",IRQ_MB_A_USB_OC(0),	IRQ_MB_A_USB_OC_NUM, 1, L },
+	{ "MB_A_PCMCIA_OC",IRQ_MB_A_PCMCIA_OC,	1,		     1, L },
+#endif
+	{ 0 }
+};
+#define NUM_GBUS_IRQ_INITS  \
+   ((sizeof gbus_irq_inits / sizeof gbus_irq_inits[0]) - 1)
+
+static struct hw_interrupt_type gbus_hw_itypes[NUM_GBUS_IRQ_INITS];
+
+#endif /* CONFIG_RTE_GBUS_INT */
+
+
+void __init rte_cb_init_irqs (void)
+{
+#ifdef CONFIG_RTE_GBUS_INT
+	gbus_int_init_irqs ();
+	gbus_int_init_irq_types (gbus_irq_inits, gbus_hw_itypes);
+#endif /* CONFIG_RTE_GBUS_INT */
+}