Merge branch 'x86/mpparse' into x86/devel

Conflicts:

	arch/x86/Kconfig
	arch/x86/kernel/io_apic_32.c
	arch/x86/kernel/setup_64.c
	arch/x86/mm/init_32.c

Signed-off-by: Ingo Molnar <mingo@elte.hu>

1 files changed, 94 insertions, 41 deletions

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 7dc46ba26fb..640dc62a7fa 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -230,6 +230,27 @@ config SMP
 
 	  If you don't know what to do here, say N.
 
+config X86_FIND_SMP_CONFIG
+	def_bool y
+	depends on X86_MPPARSE || X86_VOYAGER || X86_VISWS
+	depends on X86_32
+
+if ACPI
+config X86_MPPARSE
+	def_bool y
+	bool "Enable MPS table"
+	depends on X86_LOCAL_APIC && !X86_VISWS
+	help
+	  For old smp systems that do not have proper acpi support. Newer systems
+	  (esp with 64bit cpus) with acpi support, MADT and DSDT will override it
+endif
+
+if !ACPI
+config X86_MPPARSE
+	def_bool y
+	depends on X86_LOCAL_APIC && !X86_VISWS
+endif
+
 choice
 	prompt "Subarchitecture Type"
 	default X86_PC
@@ -261,36 +282,6 @@ config X86_VOYAGER
 	  If you do not specifically know you have a Voyager based machine,
 	  say N here, otherwise the kernel you build will not be bootable.
 
-config X86_NUMAQ
-	bool "NUMAQ (IBM/Sequent)"
-	depends on SMP && X86_32 && PCI
-	select NUMA
-	help
-	  This option is used for getting Linux to run on a (IBM/Sequent) NUMA
-	  multiquad box. This changes the way that processors are bootstrapped,
-	  and uses Clustered Logical APIC addressing mode instead of Flat Logical.
-	  You will need a new lynxer.elf file to flash your firmware with - send
-	  email to <Martin.Bligh@us.ibm.com>.
-
-config X86_SUMMIT
-	bool "Summit/EXA (IBM x440)"
-	depends on X86_32 && SMP
-	help
-	  This option is needed for IBM systems that use the Summit/EXA chipset.
-	  In particular, it is needed for the x440.
-
-	  If you don't have one of these computers, you should say N here.
-	  If you want to build a NUMA kernel, you must select ACPI.
-
-config X86_BIGSMP
-	bool "Support for other sub-arch SMP systems with more than 8 CPUs"
-	depends on X86_32 && SMP
-	help
-	  This option is needed for the systems that have more than 8 CPUs
-	  and if the system is not of any sub-arch type above.
-
-	  If you don't have such a system, you should say N here.
-
 config X86_VISWS
 	bool "SGI 320/540 (Visual Workstation)"
 	depends on X86_32 && !PCI
@@ -304,12 +295,33 @@ config X86_VISWS
 	  and vice versa. See <file:Documentation/sgi-visws.txt> for details.
 
 config X86_GENERICARCH
-       bool "Generic architecture (Summit, bigsmp, ES7000, default)"
+       bool "Generic architecture"
 	depends on X86_32
        help
-          This option compiles in the Summit, bigsmp, ES7000, default subarchitectures.
-	  It is intended for a generic binary kernel.
-	  If you want a NUMA kernel, select ACPI.   We need SRAT for NUMA.
+          This option compiles in the NUMAQ, Summit, bigsmp, ES7000, default
+	  subarchitectures.  It is intended for a generic binary kernel.
+	  if you select them all, kernel will probe it one by one. and will
+	  fallback to default.
+
+if X86_GENERICARCH
+
+config X86_NUMAQ
+	bool "NUMAQ (IBM/Sequent)"
+	depends on SMP && X86_32 && PCI && X86_MPPARSE
+	select NUMA
+	help
+	  This option is used for getting Linux to run on a NUMAQ (IBM/Sequent)
+	  NUMA multiquad box. This changes the way that processors are
+	  bootstrapped, and uses Clustered Logical APIC addressing mode instead
+	  of Flat Logical.  You will need a new lynxer.elf file to flash your
+	  firmware with - send email to <Martin.Bligh@us.ibm.com>.
+
+config X86_SUMMIT
+	bool "Summit/EXA (IBM x440)"
+	depends on X86_32 && SMP
+	help
+	  This option is needed for IBM systems that use the Summit/EXA chipset.
+	  In particular, it is needed for the x440.
 
 config X86_ES7000
 	bool "Support for Unisys ES7000 IA32 series"
@@ -317,8 +329,15 @@ config X86_ES7000
 	help
 	  Support for Unisys ES7000 systems.  Say 'Y' here if this kernel is
 	  supposed to run on an IA32-based Unisys ES7000 system.
-	  Only choose this option if you have such a system, otherwise you
-	  should say N here.
+
+config X86_BIGSMP
+	bool "Support for big SMP systems with more than 8 CPUs"
+	depends on X86_32 && SMP
+	help
+	  This option is needed for the systems that have more than 8 CPUs
+	  and if the system is not of any sub-arch type above.
+
+endif
 
 config X86_RDC321X
 	bool "RDC R-321x SoC"
@@ -432,7 +451,7 @@ config MEMTEST
 
 config ACPI_SRAT
 	def_bool y
-	depends on X86_32 && ACPI && NUMA && (X86_SUMMIT || X86_GENERICARCH)
+	depends on X86_32 && ACPI && NUMA && X86_GENERICARCH
 	select ACPI_NUMA
 
 config HAVE_ARCH_PARSE_SRAT
@@ -441,11 +460,11 @@ config HAVE_ARCH_PARSE_SRAT
 
 config X86_SUMMIT_NUMA
 	def_bool y
-	depends on X86_32 && NUMA && (X86_SUMMIT || X86_GENERICARCH)
+	depends on X86_32 && NUMA && X86_GENERICARCH
 
 config X86_CYCLONE_TIMER
 	def_bool y
-	depends on X86_32 && X86_SUMMIT || X86_GENERICARCH
+	depends on X86_GENERICARCH
 
 config ES7000_CLUSTERED_APIC
 	def_bool y
@@ -910,9 +929,9 @@ config X86_PAE
 config NUMA
 	bool "Numa Memory Allocation and Scheduler Support (EXPERIMENTAL)"
 	depends on SMP
-	depends on X86_64 || (X86_32 && HIGHMEM64G && (X86_NUMAQ || (X86_SUMMIT || X86_GENERICARCH) && ACPI) && EXPERIMENTAL)
+	depends on X86_64 || (X86_32 && HIGHMEM64G && (X86_NUMAQ || X86_BIGSMP || X86_SUMMIT && ACPI) && EXPERIMENTAL)
 	default n if X86_PC
-	default y if (X86_NUMAQ || X86_SUMMIT)
+	default y if (X86_NUMAQ || X86_SUMMIT || X86_BIGSMP)
 	help
 	  Enable NUMA (Non Uniform Memory Access) support.
 	  The kernel will try to allocate memory used by a CPU on the
@@ -1089,6 +1108,40 @@ config MTRR
 
 	  See <file:Documentation/mtrr.txt> for more information.
 
+config MTRR_SANITIZER
+	def_bool y
+	prompt "MTRR cleanup support"
+	depends on MTRR
+	help
+	  Convert MTRR layout from continuous to discrete, so some X driver
+	  could add WB entries.
+
+	  Say N here if you see bootup problems (boot crash, boot hang,
+	  spontaneous reboots).
+
+	  Could be disabled with disable_mtrr_cleanup. Also mtrr_chunk_size
+	  could be used to send largest mtrr entry size for continuous block
+	  to hold holes (aka. UC entries)
+
+	  If unsure, say Y.
+
+config MTRR_SANITIZER_ENABLE_DEFAULT
+	int "MTRR cleanup enable value (0-1)"
+	range 0 1
+	default "0"
+	depends on MTRR_SANITIZER
+	help
+	  Enable mtrr cleanup default value
+
+config MTRR_SANITIZER_SPARE_REG_NR_DEFAULT
+	int "MTRR cleanup spare reg num (0-7)"
+	range 0 7
+	default "1"
+	depends on MTRR_SANITIZER
+	help
+	  mtrr cleanup spare entries default, it can be changed via
+	  mtrr_spare_reg_nr=
+
 config X86_PAT
 	bool
 	prompt "x86 PAT support"