x86/paravirt: split paravirt definitions into paravirt_types.h

Split the monolithic asm/paravirt.h into separate paravirt.h (inlines and other
"active" definitions), and paravirt_types.h (types, constants and other "passive"
definitions).  This makes it easier to use the type/constant definitions without
pulling in everything else and causing circular dependency problems.

[ Impact: cleanup ]

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>

1 files changed, 1 insertions, 710 deletions

diff --git a/arch/x86/include/asm/paravirt.h b/arch/x86/include/asm/paravirt.h
index 4fb37c8a083..6a07af432c8 100644
--- a/arch/x86/include/asm/paravirt.h
+++ b/arch/x86/include/asm/paravirt.h
@@ -7,689 +7,11 @@
 #include <asm/pgtable_types.h>
 #include <asm/asm.h>
 
-/* Bitmask of what can be clobbered: usually at least eax. */
-#define CLBR_NONE 0
-#define CLBR_EAX  (1 << 0)
-#define CLBR_ECX  (1 << 1)
-#define CLBR_EDX  (1 << 2)
-#define CLBR_EDI  (1 << 3)
-
-#ifdef CONFIG_X86_32
-/* CLBR_ANY should match all regs platform has. For i386, that's just it */
-#define CLBR_ANY  ((1 << 4) - 1)
-
-#define CLBR_ARG_REGS	(CLBR_EAX | CLBR_EDX | CLBR_ECX)
-#define CLBR_RET_REG	(CLBR_EAX | CLBR_EDX)
-#define CLBR_SCRATCH	(0)
-#else
-#define CLBR_RAX  CLBR_EAX
-#define CLBR_RCX  CLBR_ECX
-#define CLBR_RDX  CLBR_EDX
-#define CLBR_RDI  CLBR_EDI
-#define CLBR_RSI  (1 << 4)
-#define CLBR_R8   (1 << 5)
-#define CLBR_R9   (1 << 6)
-#define CLBR_R10  (1 << 7)
-#define CLBR_R11  (1 << 8)
-
-#define CLBR_ANY  ((1 << 9) - 1)
-
-#define CLBR_ARG_REGS	(CLBR_RDI | CLBR_RSI | CLBR_RDX | \
-			 CLBR_RCX | CLBR_R8 | CLBR_R9)
-#define CLBR_RET_REG	(CLBR_RAX)
-#define CLBR_SCRATCH	(CLBR_R10 | CLBR_R11)
-
-#include <asm/desc_defs.h>
-#endif /* X86_64 */
-
-#define CLBR_CALLEE_SAVE ((CLBR_ARG_REGS | CLBR_SCRATCH) & ~CLBR_RET_REG)
+#include <asm/paravirt_types.h>
 
 #ifndef __ASSEMBLY__
 #include <linux/types.h>
 #include <linux/cpumask.h>
-#include <asm/kmap_types.h>
-#include <asm/desc_defs.h>
-
-struct page;
-struct thread_struct;
-struct desc_ptr;
-struct tss_struct;
-struct mm_struct;
-struct desc_struct;
-struct task_struct;
-
-/*
- * Wrapper type for pointers to code which uses the non-standard
- * calling convention.  See PV_CALL_SAVE_REGS_THUNK below.
- */
-struct paravirt_callee_save {
-	void *func;
-};
-
-/* general info */
-struct pv_info {
-	unsigned int kernel_rpl;
-	int shared_kernel_pmd;
-	int paravirt_enabled;
-	const char *name;
-};
-
-struct pv_init_ops {
-	/*
-	 * Patch may replace one of the defined code sequences with
-	 * arbitrary code, subject to the same register constraints.
-	 * This generally means the code is not free to clobber any
-	 * registers other than EAX.  The patch function should return
-	 * the number of bytes of code generated, as we nop pad the
-	 * rest in generic code.
-	 */
-	unsigned (*patch)(u8 type, u16 clobber, void *insnbuf,
-			  unsigned long addr, unsigned len);
-
-	/* Basic arch-specific setup */
-	void (*arch_setup)(void);
-	char *(*memory_setup)(void);
-	void (*post_allocator_init)(void);
-
-	/* Print a banner to identify the environment */
-	void (*banner)(void);
-};
-
-
-struct pv_lazy_ops {
-	/* Set deferred update mode, used for batching operations. */
-	void (*enter)(void);
-	void (*leave)(void);
-};
-
-struct pv_time_ops {
-	void (*time_init)(void);
-
-	/* Set and set time of day */
-	unsigned long (*get_wallclock)(void);
-	int (*set_wallclock)(unsigned long);
-
-	unsigned long long (*sched_clock)(void);
-	unsigned long (*get_tsc_khz)(void);
-};
-
-struct pv_cpu_ops {
-	/* hooks for various privileged instructions */
-	unsigned long (*get_debugreg)(int regno);
-	void (*set_debugreg)(int regno, unsigned long value);
-
-	void (*clts)(void);
-
-	unsigned long (*read_cr0)(void);
-	void (*write_cr0)(unsigned long);
-
-	unsigned long (*read_cr4_safe)(void);
-	unsigned long (*read_cr4)(void);
-	void (*write_cr4)(unsigned long);
-
-#ifdef CONFIG_X86_64
-	unsigned long (*read_cr8)(void);
-	void (*write_cr8)(unsigned long);
-#endif
-
-	/* Segment descriptor handling */
-	void (*load_tr_desc)(void);
-	void (*load_gdt)(const struct desc_ptr *);
-	void (*load_idt)(const struct desc_ptr *);
-	void (*store_gdt)(struct desc_ptr *);
-	void (*store_idt)(struct desc_ptr *);
-	void (*set_ldt)(const void *desc, unsigned entries);
-	unsigned long (*store_tr)(void);
-	void (*load_tls)(struct thread_struct *t, unsigned int cpu);
-#ifdef CONFIG_X86_64
-	void (*load_gs_index)(unsigned int idx);
-#endif
-	void (*write_ldt_entry)(struct desc_struct *ldt, int entrynum,
-				const void *desc);
-	void (*write_gdt_entry)(struct desc_struct *,
-				int entrynum, const void *desc, int size);
-	void (*write_idt_entry)(gate_desc *,
-				int entrynum, const gate_desc *gate);
-	void (*alloc_ldt)(struct desc_struct *ldt, unsigned entries);
-	void (*free_ldt)(struct desc_struct *ldt, unsigned entries);
-
-	void (*load_sp0)(struct tss_struct *tss, struct thread_struct *t);
-
-	void (*set_iopl_mask)(unsigned mask);
-
-	void (*wbinvd)(void);
-	void (*io_delay)(void);
-
-	/* cpuid emulation, mostly so that caps bits can be disabled */
-	void (*cpuid)(unsigned int *eax, unsigned int *ebx,
-		      unsigned int *ecx, unsigned int *edx);
-
-	/* MSR, PMC and TSR operations.
-	   err = 0/-EFAULT.  wrmsr returns 0/-EFAULT. */
-	u64 (*read_msr_amd)(unsigned int msr, int *err);
-	u64 (*read_msr)(unsigned int msr, int *err);
-	int (*write_msr)(unsigned int msr, unsigned low, unsigned high);
-
-	u64 (*read_tsc)(void);
-	u64 (*read_pmc)(int counter);
-	unsigned long long (*read_tscp)(unsigned int *aux);
-
-	/*
-	 * Atomically enable interrupts and return to userspace.  This
-	 * is only ever used to return to 32-bit processes; in a
-	 * 64-bit kernel, it's used for 32-on-64 compat processes, but
-	 * never native 64-bit processes.  (Jump, not call.)
-	 */
-	void (*irq_enable_sysexit)(void);
-
-	/*
-	 * Switch to usermode gs and return to 64-bit usermode using
-	 * sysret.  Only used in 64-bit kernels to return to 64-bit
-	 * processes.  Usermode register state, including %rsp, must
-	 * already be restored.
-	 */
-	void (*usergs_sysret64)(void);
-
-	/*
-	 * Switch to usermode gs and return to 32-bit usermode using
-	 * sysret.  Used to return to 32-on-64 compat processes.
-	 * Other usermode register state, including %esp, must already
-	 * be restored.
-	 */
-	void (*usergs_sysret32)(void);
-
-	/* Normal iret.  Jump to this with the standard iret stack
-	   frame set up. */
-	void (*iret)(void);
-
-	void (*swapgs)(void);
-
-	void (*start_context_switch)(struct task_struct *prev);
-	void (*end_context_switch)(struct task_struct *next);
-};
-
-struct pv_irq_ops {
-	void (*init_IRQ)(void);
-
-	/*
-	 * Get/set interrupt state.  save_fl and restore_fl are only
-	 * expected to use X86_EFLAGS_IF; all other bits
-	 * returned from save_fl are undefined, and may be ignored by
-	 * restore_fl.
-	 *
-	 * NOTE: These functions callers expect the callee to preserve
-	 * more registers than the standard C calling convention.
-	 */
-	struct paravirt_callee_save save_fl;
-	struct paravirt_callee_save restore_fl;
-	struct paravirt_callee_save irq_disable;
-	struct paravirt_callee_save irq_enable;
-
-	void (*safe_halt)(void);
-	void (*halt)(void);
-
-#ifdef CONFIG_X86_64
-	void (*adjust_exception_frame)(void);
-#endif
-};
-
-struct pv_apic_ops {
-#ifdef CONFIG_X86_LOCAL_APIC
-	void (*setup_boot_clock)(void);
-	void (*setup_secondary_clock)(void);
-
-	void (*startup_ipi_hook)(int phys_apicid,
-				 unsigned long start_eip,
-				 unsigned long start_esp);
-#endif
-};
-
-struct pv_mmu_ops {
-	/*
-	 * Called before/after init_mm pagetable setup. setup_start
-	 * may reset %cr3, and may pre-install parts of the pagetable;
-	 * pagetable setup is expected to preserve any existing
-	 * mapping.
-	 */
-	void (*pagetable_setup_start)(pgd_t *pgd_base);
-	void (*pagetable_setup_done)(pgd_t *pgd_base);
-
-	unsigned long (*read_cr2)(void);
-	void (*write_cr2)(unsigned long);
-
-	unsigned long (*read_cr3)(void);
-	void (*write_cr3)(unsigned long);
-
-	/*
-	 * Hooks for intercepting the creation/use/destruction of an
-	 * mm_struct.
-	 */
-	void (*activate_mm)(struct mm_struct *prev,
-			    struct mm_struct *next);
-	void (*dup_mmap)(struct mm_struct *oldmm,
-			 struct mm_struct *mm);
-	void (*exit_mmap)(struct mm_struct *mm);
-
-
-	/* TLB operations */
-	void (*flush_tlb_user)(void);
-	void (*flush_tlb_kernel)(void);
-	void (*flush_tlb_single)(unsigned long addr);
-	void (*flush_tlb_others)(const struct cpumask *cpus,
-				 struct mm_struct *mm,
-				 unsigned long va);
-
-	/* Hooks for allocating and freeing a pagetable top-level */
-	int  (*pgd_alloc)(struct mm_struct *mm);
-	void (*pgd_free)(struct mm_struct *mm, pgd_t *pgd);
-
-	/*
-	 * Hooks for allocating/releasing pagetable pages when they're
-	 * attached to a pagetable
-	 */
-	void (*alloc_pte)(struct mm_struct *mm, unsigned long pfn);
-	void (*alloc_pmd)(struct mm_struct *mm, unsigned long pfn);
-	void (*alloc_pmd_clone)(unsigned long pfn, unsigned long clonepfn, unsigned long start, unsigned long count);
-	void (*alloc_pud)(struct mm_struct *mm, unsigned long pfn);
-	void (*release_pte)(unsigned long pfn);
-	void (*release_pmd)(unsigned long pfn);
-	void (*release_pud)(unsigned long pfn);
-
-	/* Pagetable manipulation functions */
-	void (*set_pte)(pte_t *ptep, pte_t pteval);
-	void (*set_pte_at)(struct mm_struct *mm, unsigned long addr,
-			   pte_t *ptep, pte_t pteval);
-	void (*set_pmd)(pmd_t *pmdp, pmd_t pmdval);
-	void (*pte_update)(struct mm_struct *mm, unsigned long addr,
-			   pte_t *ptep);
-	void (*pte_update_defer)(struct mm_struct *mm,
-				 unsigned long addr, pte_t *ptep);
-
-	pte_t (*ptep_modify_prot_start)(struct mm_struct *mm, unsigned long addr,
-					pte_t *ptep);
-	void (*ptep_modify_prot_commit)(struct mm_struct *mm, unsigned long addr,
-					pte_t *ptep, pte_t pte);
-
-	struct paravirt_callee_save pte_val;
-	struct paravirt_callee_save make_pte;
-
-	struct paravirt_callee_save pgd_val;
-	struct paravirt_callee_save make_pgd;
-
-#if PAGETABLE_LEVELS >= 3
-#ifdef CONFIG_X86_PAE
-	void (*set_pte_atomic)(pte_t *ptep, pte_t pteval);
-	void (*pte_clear)(struct mm_struct *mm, unsigned long addr,
-			  pte_t *ptep);
-	void (*pmd_clear)(pmd_t *pmdp);
-
-#endif	/* CONFIG_X86_PAE */
-
-	void (*set_pud)(pud_t *pudp, pud_t pudval);
-
-	struct paravirt_callee_save pmd_val;
-	struct paravirt_callee_save make_pmd;
-
-#if PAGETABLE_LEVELS == 4
-	struct paravirt_callee_save pud_val;
-	struct paravirt_callee_save make_pud;
-
-	void (*set_pgd)(pgd_t *pudp, pgd_t pgdval);
-#endif	/* PAGETABLE_LEVELS == 4 */
-#endif	/* PAGETABLE_LEVELS >= 3 */
-
-#ifdef CONFIG_HIGHPTE
-	void *(*kmap_atomic_pte)(struct page *page, enum km_type type);
-#endif
-
-	struct pv_lazy_ops lazy_mode;
-
-	/* dom0 ops */
-
-	/* Sometimes the physical address is a pfn, and sometimes its
-	   an mfn.  We can tell which is which from the index. */
-	void (*set_fixmap)(unsigned /* enum fixed_addresses */ idx,
-			   phys_addr_t phys, pgprot_t flags);
-};
-
-struct raw_spinlock;
-struct pv_lock_ops {
-	int (*spin_is_locked)(struct raw_spinlock *lock);
-	int (*spin_is_contended)(struct raw_spinlock *lock);
-	void (*spin_lock)(struct raw_spinlock *lock);
-	void (*spin_lock_flags)(struct raw_spinlock *lock, unsigned long flags);
-	int (*spin_trylock)(struct raw_spinlock *lock);
-	void (*spin_unlock)(struct raw_spinlock *lock);
-};
-
-/* This contains all the paravirt structures: we get a convenient
- * number for each function using the offset which we use to indicate
- * what to patch. */
-struct paravirt_patch_template {
-	struct pv_init_ops pv_init_ops;
-	struct pv_time_ops pv_time_ops;
-	struct pv_cpu_ops pv_cpu_ops;
-	struct pv_irq_ops pv_irq_ops;
-	struct pv_apic_ops pv_apic_ops;
-	struct pv_mmu_ops pv_mmu_ops;
-	struct pv_lock_ops pv_lock_ops;
-};
-
-extern struct pv_info pv_info;
-extern struct pv_init_ops pv_init_ops;
-extern struct pv_time_ops pv_time_ops;
-extern struct pv_cpu_ops pv_cpu_ops;
-extern struct pv_irq_ops pv_irq_ops;
-extern struct pv_apic_ops pv_apic_ops;
-extern struct pv_mmu_ops pv_mmu_ops;
-extern struct pv_lock_ops pv_lock_ops;
-
-#define PARAVIRT_PATCH(x)					\
-	(offsetof(struct paravirt_patch_template, x) / sizeof(void *))
-
-#define paravirt_type(op)				\
-	[paravirt_typenum] "i" (PARAVIRT_PATCH(op)),	\
-	[paravirt_opptr] "i" (&(op))
-#define paravirt_clobber(clobber)		\
-	[paravirt_clobber] "i" (clobber)
-
-/*
- * Generate some code, and mark it as patchable by the
- * apply_paravirt() alternate instruction patcher.
- */
-#define _paravirt_alt(insn_string, type, clobber)	\
-	"771:\n\t" insn_string "\n" "772:\n"		\
-	".pushsection .parainstructions,\"a\"\n"	\
-	_ASM_ALIGN "\n"					\
-	_ASM_PTR " 771b\n"				\
-	"  .byte " type "\n"				\
-	"  .byte 772b-771b\n"				\
-	"  .short " clobber "\n"			\
-	".popsection\n"
-
-/* Generate patchable code, with the default asm parameters. */
-#define paravirt_alt(insn_string)					\
-	_paravirt_alt(insn_string, "%c[paravirt_typenum]", "%c[paravirt_clobber]")
-
-/* Simple instruction patching code. */
-#define DEF_NATIVE(ops, name, code) 					\
-	extern const char start_##ops##_##name[], end_##ops##_##name[];	\
-	asm("start_" #ops "_" #name ": " code "; end_" #ops "_" #name ":")
-
-unsigned paravirt_patch_nop(void);
-unsigned paravirt_patch_ident_32(void *insnbuf, unsigned len);
-unsigned paravirt_patch_ident_64(void *insnbuf, unsigned len);
-unsigned paravirt_patch_ignore(unsigned len);
-unsigned paravirt_patch_call(void *insnbuf,
-			     const void *target, u16 tgt_clobbers,
-			     unsigned long addr, u16 site_clobbers,
-			     unsigned len);
-unsigned paravirt_patch_jmp(void *insnbuf, const void *target,
-			    unsigned long addr, unsigned len);
-unsigned paravirt_patch_default(u8 type, u16 clobbers, void *insnbuf,
-				unsigned long addr, unsigned len);
-
-unsigned paravirt_patch_insns(void *insnbuf, unsigned len,
-			      const char *start, const char *end);
-
-unsigned native_patch(u8 type, u16 clobbers, void *ibuf,
-		      unsigned long addr, unsigned len);
-
-int paravirt_disable_iospace(void);
-
-/*
- * This generates an indirect call based on the operation type number.
- * The type number, computed in PARAVIRT_PATCH, is derived from the
- * offset into the paravirt_patch_template structure, and can therefore be
- * freely converted back into a structure offset.
- */
-#define PARAVIRT_CALL	"call *%c[paravirt_opptr];"
-
-/*
- * These macros are intended to wrap calls through one of the paravirt
- * ops structs, so that they can be later identified and patched at
- * runtime.
- *
- * Normally, a call to a pv_op function is a simple indirect call:
- * (pv_op_struct.operations)(args...).
- *
- * Unfortunately, this is a relatively slow operation for modern CPUs,
- * because it cannot necessarily determine what the destination
- * address is.  In this case, the address is a runtime constant, so at
- * the very least we can patch the call to e a simple direct call, or
- * ideally, patch an inline implementation into the callsite.  (Direct
- * calls are essentially free, because the call and return addresses
- * are completely predictable.)
- *
- * For i386, these macros rely on the standard gcc "regparm(3)" calling
- * convention, in which the first three arguments are placed in %eax,
- * %edx, %ecx (in that order), and the remaining arguments are placed
- * on the stack.  All caller-save registers (eax,edx,ecx) are expected
- * to be modified (either clobbered or used for return values).
- * X86_64, on the other hand, already specifies a register-based calling
- * conventions, returning at %rax, with parameteres going on %rdi, %rsi,
- * %rdx, and %rcx. Note that for this reason, x86_64 does not need any
- * special handling for dealing with 4 arguments, unlike i386.
- * However, x86_64 also have to clobber all caller saved registers, which
- * unfortunately, are quite a bit (r8 - r11)
- *
- * The call instruction itself is marked by placing its start address
- * and size into the .parainstructions section, so that
- * apply_paravirt() in arch/i386/kernel/alternative.c can do the
- * appropriate patching under the control of the backend pv_init_ops
- * implementation.
- *
- * Unfortunately there's no way to get gcc to generate the args setup
- * for the call, and then allow the call itself to be generated by an
- * inline asm.  Because of this, we must do the complete arg setup and
- * return value handling from within these macros.  This is fairly
- * cumbersome.
- *
- * There are 5 sets of PVOP_* macros for dealing with 0-4 arguments.
- * It could be extended to more arguments, but there would be little
- * to be gained from that.  For each number of arguments, there are
- * the two VCALL and CALL variants for void and non-void functions.
- *
- * When there is a return value, the invoker of the macro must specify
- * the return type.  The macro then uses sizeof() on that type to
- * determine whether its a 32 or 64 bit value, and places the return
- * in the right register(s) (just %eax for 32-bit, and %edx:%eax for
- * 64-bit). For x86_64 machines, it just returns at %rax regardless of
- * the return value size.
- *
- * 64-bit arguments are passed as a pair of adjacent 32-bit arguments
- * i386 also passes 64-bit arguments as a pair of adjacent 32-bit arguments
- * in low,high order
- *
- * Small structures are passed and returned in registers.  The macro
- * calling convention can't directly deal with this, so the wrapper
- * functions must do this.
- *
- * These PVOP_* macros are only defined within this header.  This
- * means that all uses must be wrapped in inline functions.  This also
- * makes sure the incoming and outgoing types are always correct.
- */
-#ifdef CONFIG_X86_32
-#define PVOP_VCALL_ARGS				\
-	unsigned long __eax = __eax, __edx = __edx, __ecx = __ecx
-#define PVOP_CALL_ARGS			PVOP_VCALL_ARGS
-
-#define PVOP_CALL_ARG1(x)		"a" ((unsigned long)(x))
-#define PVOP_CALL_ARG2(x)		"d" ((unsigned long)(x))
-#define PVOP_CALL_ARG3(x)		"c" ((unsigned long)(x))
-
-#define PVOP_VCALL_CLOBBERS		"=a" (__eax), "=d" (__edx),	\
-					"=c" (__ecx)
-#define PVOP_CALL_CLOBBERS		PVOP_VCALL_CLOBBERS
-
-#define PVOP_VCALLEE_CLOBBERS		"=a" (__eax), "=d" (__edx)
-#define PVOP_CALLEE_CLOBBERS		PVOP_VCALLEE_CLOBBERS
-
-#define EXTRA_CLOBBERS
-#define VEXTRA_CLOBBERS
-#else  /* CONFIG_X86_64 */
-#define PVOP_VCALL_ARGS					\
-	unsigned long __edi = __edi, __esi = __esi,	\
-		__edx = __edx, __ecx = __ecx
-#define PVOP_CALL_ARGS		PVOP_VCALL_ARGS, __eax
-
-#define PVOP_CALL_ARG1(x)		"D" ((unsigned long)(x))
-#define PVOP_CALL_ARG2(x)		"S" ((unsigned long)(x))
-#define PVOP_CALL_ARG3(x)		"d" ((unsigned long)(x))
-#define PVOP_CALL_ARG4(x)		"c" ((unsigned long)(x))
-
-#define PVOP_VCALL_CLOBBERS	"=D" (__edi),				\
-				"=S" (__esi), "=d" (__edx),		\
-				"=c" (__ecx)
-#define PVOP_CALL_CLOBBERS	PVOP_VCALL_CLOBBERS, "=a" (__eax)
-
-#define PVOP_VCALLEE_CLOBBERS	"=a" (__eax)
-#define PVOP_CALLEE_CLOBBERS	PVOP_VCALLEE_CLOBBERS
-
-#define EXTRA_CLOBBERS	 , "r8", "r9", "r10", "r11"
-#define VEXTRA_CLOBBERS	 , "rax", "r8", "r9", "r10", "r11"
-#endif	/* CONFIG_X86_32 */
-
-#ifdef CONFIG_PARAVIRT_DEBUG
-#define PVOP_TEST_NULL(op)	BUG_ON(op == NULL)
-#else
-#define PVOP_TEST_NULL(op)	((void)op)
-#endif
-
-#define ____PVOP_CALL(rettype, op, clbr, call_clbr, extra_clbr,		\
-		      pre, post, ...)					\
-	({								\
-		rettype __ret;						\
-		PVOP_CALL_ARGS;						\
-		PVOP_TEST_NULL(op);					\
-		/* This is 32-bit specific, but is okay in 64-bit */	\
-		/* since this condition will never hold */		\
-		if (sizeof(rettype) > sizeof(unsigned long)) {		\
-			asm volatile(pre				\
-				     paravirt_alt(PARAVIRT_CALL)	\
-				     post				\
-				     : call_clbr			\
-				     : paravirt_type(op),		\
-				       paravirt_clobber(clbr),		\
-				       ##__VA_ARGS__			\
-				     : "memory", "cc" extra_clbr);	\
-			__ret = (rettype)((((u64)__edx) << 32) | __eax); \
-		} else {						\
-			asm volatile(pre				\
-				     paravirt_alt(PARAVIRT_CALL)	\
-				     post				\
-				     : call_clbr			\
-				     : paravirt_type(op),		\
-				       paravirt_clobber(clbr),		\
-				       ##__VA_ARGS__			\
-				     : "memory", "cc" extra_clbr);	\
-			__ret = (rettype)__eax;				\
-		}							\
-		__ret;							\
-	})
-
-#define __PVOP_CALL(rettype, op, pre, post, ...)			\
-	____PVOP_CALL(rettype, op, CLBR_ANY, PVOP_CALL_CLOBBERS,	\
-		      EXTRA_CLOBBERS, pre, post, ##__VA_ARGS__)
-
-#define __PVOP_CALLEESAVE(rettype, op, pre, post, ...)			\
-	____PVOP_CALL(rettype, op.func, CLBR_RET_REG,			\
-		      PVOP_CALLEE_CLOBBERS, ,				\
-		      pre, post, ##__VA_ARGS__)
-
-
-#define ____PVOP_VCALL(op, clbr, call_clbr, extra_clbr, pre, post, ...)	\
-	({								\
-		PVOP_VCALL_ARGS;					\
-		PVOP_TEST_NULL(op);					\
-		asm volatile(pre					\
-			     paravirt_alt(PARAVIRT_CALL)		\
-			     post					\
-			     : call_clbr				\
-			     : paravirt_type(op),			\
-			       paravirt_clobber(clbr),			\
-			       ##__VA_ARGS__				\
-			     : "memory", "cc" extra_clbr);		\
-	})
-
-#define __PVOP_VCALL(op, pre, post, ...)				\
-	____PVOP_VCALL(op, CLBR_ANY, PVOP_VCALL_CLOBBERS,		\
-		       VEXTRA_CLOBBERS,					\
-		       pre, post, ##__VA_ARGS__)
-
-#define __PVOP_VCALLEESAVE(rettype, op, pre, post, ...)			\
-	____PVOP_CALL(rettype, op.func, CLBR_RET_REG,			\
-		      PVOP_VCALLEE_CLOBBERS, ,				\
-		      pre, post, ##__VA_ARGS__)
-
-
-
-#define PVOP_CALL0(rettype, op)						\
-	__PVOP_CALL(rettype, op, "", "")
-#define PVOP_VCALL0(op)							\
-	__PVOP_VCALL(op, "", "")
-
-#define PVOP_CALLEE0(rettype, op)					\
-	__PVOP_CALLEESAVE(rettype, op, "", "")
-#define PVOP_VCALLEE0(op)						\
-	__PVOP_VCALLEESAVE(op, "", "")
-
-
-#define PVOP_CALL1(rettype, op, arg1)					\
-	__PVOP_CALL(rettype, op, "", "", PVOP_CALL_ARG1(arg1))
-#define PVOP_VCALL1(op, arg1)						\
-	__PVOP_VCALL(op, "", "", PVOP_CALL_ARG1(arg1))
-
-#define PVOP_CALLEE1(rettype, op, arg1)					\
-	__PVOP_CALLEESAVE(rettype, op, "", "", PVOP_CALL_ARG1(arg1))
-#define PVOP_VCALLEE1(op, arg1)						\
-	__PVOP_VCALLEESAVE(op, "", "", PVOP_CALL_ARG1(arg1))
-
-
-#define PVOP_CALL2(rettype, op, arg1, arg2)				\
-	__PVOP_CALL(rettype, op, "", "", PVOP_CALL_ARG1(arg1),		\
-		    PVOP_CALL_ARG2(arg2))
-#define PVOP_VCALL2(op, arg1, arg2)					\
-	__PVOP_VCALL(op, "", "", PVOP_CALL_ARG1(arg1),			\
-		     PVOP_CALL_ARG2(arg2))
-
-#define PVOP_CALLEE2(rettype, op, arg1, arg2)				\
-	__PVOP_CALLEESAVE(rettype, op, "", "", PVOP_CALL_ARG1(arg1),	\
-			  PVOP_CALL_ARG2(arg2))
-#define PVOP_VCALLEE2(op, arg1, arg2)					\
-	__PVOP_VCALLEESAVE(op, "", "", PVOP_CALL_ARG1(arg1),		\
-			   PVOP_CALL_ARG2(arg2))
-
-
-#define PVOP_CALL3(rettype, op, arg1, arg2, arg3)			\
-	__PVOP_CALL(rettype, op, "", "", PVOP_CALL_ARG1(arg1),		\
-		    PVOP_CALL_ARG2(arg2), PVOP_CALL_ARG3(arg3))
-#define PVOP_VCALL3(op, arg1, arg2, arg3)				\
-	__PVOP_VCALL(op, "", "", PVOP_CALL_ARG1(arg1),			\
-		     PVOP_CALL_ARG2(arg2), PVOP_CALL_ARG3(arg3))
-
-/* This is the only difference in x86_64. We can make it much simpler */
-#ifdef CONFIG_X86_32
-#define PVOP_CALL4(rettype, op, arg1, arg2, arg3, arg4)			\
-	__PVOP_CALL(rettype, op,					\
-		    "push %[_arg4];", "lea 4(%%esp),%%esp;",		\
-		    PVOP_CALL_ARG1(arg1), PVOP_CALL_ARG2(arg2),		\
-		    PVOP_CALL_ARG3(arg3), [_arg4] "mr" ((u32)(arg4)))
-#define PVOP_VCALL4(op, arg1, arg2, arg3, arg4)				\
-	__PVOP_VCALL(op,						\
-		    "push %[_arg4];", "lea 4(%%esp),%%esp;",		\
-		    "0" ((u32)(arg1)), "1" ((u32)(arg2)),		\
-		    "2" ((u32)(arg3)), [_arg4] "mr" ((u32)(arg4)))
-#else
-#define PVOP_CALL4(rettype, op, arg1, arg2, arg3, arg4)			\
-	__PVOP_CALL(rettype, op, "", "",				\
-		    PVOP_CALL_ARG1(arg1), PVOP_CALL_ARG2(arg2),		\
-		    PVOP_CALL_ARG3(arg3), PVOP_CALL_ARG4(arg4))
-#define PVOP_VCALL4(op, arg1, arg2, arg3, arg4)				\
-	__PVOP_VCALL(op, "", "",					\
-		     PVOP_CALL_ARG1(arg1), PVOP_CALL_ARG2(arg2),	\
-		     PVOP_CALL_ARG3(arg3), PVOP_CALL_ARG4(arg4))
-#endif
 
 static inline int paravirt_enabled(void)
 {
@@ -1393,20 +715,6 @@ static inline void pmd_clear(pmd_t *pmdp)
 }
 #endif	/* CONFIG_X86_PAE */
 
-/* Lazy mode for batching updates / context switch */
-enum paravirt_lazy_mode {
-	PARAVIRT_LAZY_NONE,
-	PARAVIRT_LAZY_MMU,
-	PARAVIRT_LAZY_CPU,
-};
-
-enum paravirt_lazy_mode paravirt_get_lazy_mode(void);
-void paravirt_start_context_switch(struct task_struct *prev);
-void paravirt_end_context_switch(struct task_struct *next);
-
-void paravirt_enter_lazy_mmu(void);
-void paravirt_leave_lazy_mmu(void);
-
 #define  __HAVE_ARCH_START_CONTEXT_SWITCH
 static inline void arch_start_context_switch(struct task_struct *prev)
 {
@@ -1437,12 +745,6 @@ static inline void __set_fixmap(unsigned /* enum fixed_addresses */ idx,
 	pv_mmu_ops.set_fixmap(idx, phys, flags);
 }
 
-void _paravirt_nop(void);
-u32 _paravirt_ident_32(u32);
-u64 _paravirt_ident_64(u64);
-
-#define paravirt_nop	((void *)_paravirt_nop)
-
 #if defined(CONFIG_SMP) && defined(CONFIG_PARAVIRT_SPINLOCKS)
 
 static inline int __raw_spin_is_locked(struct raw_spinlock *lock)
@@ -1479,17 +781,6 @@ static __always_inline void __raw_spin_unlock(struct raw_spinlock *lock)
 
 #endif
 
-/* These all sit in the .parainstructions section to tell us what to patch. */
-struct paravirt_patch_site {
-	u8 *instr; 		/* original instructions */
-	u8 instrtype;		/* type of this instruction */
-	u8 len;			/* length of original instruction */
-	u16 clobbers;		/* what registers you may clobber */
-};
-
-extern struct paravirt_patch_site __parainstructions[],
-	__parainstructions_end[];
-
 #ifdef CONFIG_X86_32
 #define PV_SAVE_REGS "pushl %ecx; pushl %edx;"
 #define PV_RESTORE_REGS "popl %edx; popl %ecx;"