x86/uv: provide a System Activity Indicator driver

Impact: start per CPU heartbeat LED timers on SGI UV systems

The SGI UV system has no LEDS but uses one of the system controller
regs to indicate the online internal state of the cpu.  There is a
heartbeat bit indicating that the cpu is responding to interrupts,
and an idle bit indicating whether the cpu is idle when the heartbeat
interrupt occurs.  The current period is one second.

When a cpu panics, an error code is written by BIOS to this same reg.

This patchset provides the following:

  * x86_64: Add base functionality for writing to the specific SCIR's
    for each cpu.

  * heartbeat: Invert "heartbeat" bit to indicate the cpu is
    "interruptible".  If the current thread is the idle thread,
    then indicate system is "idle".

  * if hotplug enabled, all bits are set (0xff) when the cpu is disabled.

Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

1 files changed, 62 insertions, 1 deletions

diff --git a/arch/x86/include/asm/uv/uv_hub.h b/arch/x86/include/asm/uv/uv_hub.h
index c6ad93e315c..400776dba9b 100644
--- a/arch/x86/include/asm/uv/uv_hub.h
+++ b/arch/x86/include/asm/uv/uv_hub.h
@@ -112,6 +112,16 @@
  */
 #define UV_MAX_NASID_VALUE	(UV_MAX_NUMALINK_NODES * 2)
 
+struct uv_scir_s {
+	struct timer_list timer;
+	unsigned long	offset;
+	unsigned long	last;
+	unsigned long	idle_on;
+	unsigned long	idle_off;
+	unsigned char	state;
+	unsigned char	enabled;
+};
+
 /*
  * The following defines attributes of the HUB chip. These attributes are
  * frequently referenced and are kept in the per-cpu data areas of each cpu.
@@ -130,7 +140,9 @@ struct uv_hub_info_s {
 	unsigned char	blade_processor_id;
 	unsigned char	m_val;
 	unsigned char	n_val;
+	struct uv_scir_s scir;
 };
+
 DECLARE_PER_CPU(struct uv_hub_info_s, __uv_hub_info);
 #define uv_hub_info 		(&__get_cpu_var(__uv_hub_info))
 #define uv_cpu_hub_info(cpu)	(&per_cpu(__uv_hub_info, cpu))
@@ -162,6 +174,30 @@ DECLARE_PER_CPU(struct uv_hub_info_s, __uv_hub_info);
 
 #define UV_APIC_PNODE_SHIFT	6
 
+/* Local Bus from cpu's perspective */
+#define LOCAL_BUS_BASE		0x1c00000
+#define LOCAL_BUS_SIZE		(4 * 1024 * 1024)
+
+/*
+ * System Controller Interface Reg
+ *
+ * Note there are NO leds on a UV system.  This register is only
+ * used by the system controller to monitor system-wide operation.
+ * There are 64 regs per node.  With Nahelem cpus (2 cores per node,
+ * 8 cpus per core, 2 threads per cpu) there are 32 cpu threads on
+ * a node.
+ *
+ * The window is located at top of ACPI MMR space
+ */
+#define SCIR_WINDOW_COUNT	64
+#define SCIR_LOCAL_MMR_BASE	(LOCAL_BUS_BASE + \
+				 LOCAL_BUS_SIZE - \
+				 SCIR_WINDOW_COUNT)
+
+#define SCIR_CPU_HEARTBEAT	0x01	/* timer interrupt */
+#define SCIR_CPU_ACTIVITY	0x02	/* not idle */
+#define SCIR_CPU_HB_INTERVAL	(HZ)	/* once per second */
+
 /*
  * Macros for converting between kernel virtual addresses, socket local physical
  * addresses, and UV global physical addresses.
@@ -276,6 +312,16 @@ static inline void uv_write_local_mmr(unsigned long offset, unsigned long val)
 	*uv_local_mmr_address(offset) = val;
 }
 
+static inline unsigned char uv_read_local_mmr8(unsigned long offset)
+{
+	return *((unsigned char *)uv_local_mmr_address(offset));
+}
+
+static inline void uv_write_local_mmr8(unsigned long offset, unsigned char val)
+{
+	*((unsigned char *)uv_local_mmr_address(offset)) = val;
+}
+
 /*
  * Structures and definitions for converting between cpu, node, pnode, and blade
  * numbers.
@@ -350,5 +396,20 @@ static inline int uv_num_possible_blades(void)
 	return uv_possible_blades;
 }
 
-#endif /* _ASM_X86_UV_UV_HUB_H */
+/* Update SCIR state */
+static inline void uv_set_scir_bits(unsigned char value)
+{
+	if (uv_hub_info->scir.state != value) {
+		uv_hub_info->scir.state = value;
+		uv_write_local_mmr8(uv_hub_info->scir.offset, value);
+	}
+}
+static inline void uv_set_cpu_scir_bits(int cpu, unsigned char value)
+{
+	if (uv_cpu_hub_info(cpu)->scir.state != value) {
+		uv_cpu_hub_info(cpu)->scir.state = value;
+		uv_write_local_mmr8(uv_cpu_hub_info(cpu)->scir.offset, value);
+	}
+}
 
+#endif /* _ASM_X86_UV_UV_HUB_H */