Merge branch 'next' into for-linus

1 files changed, 54 insertions, 182 deletions

diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index 723989d7f80..6b8ca3a0285 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -33,6 +33,7 @@
 #include <linux/irq.h>
 #include <linux/bootmem.h>
 #include <linux/ioport.h>
+#include <linux/pci.h>
 
 #include <asm/pgtable.h>
 #include <asm/io_apic.h>
@@ -43,11 +44,7 @@
 
 static int __initdata acpi_force = 0;
 u32 acpi_rsdt_forced;
-#ifdef	CONFIG_ACPI
-int acpi_disabled = 0;
-#else
-int acpi_disabled = 1;
-#endif
+int acpi_disabled;
 EXPORT_SYMBOL(acpi_disabled);
 
 #ifdef	CONFIG_X86_64
@@ -121,72 +118,6 @@ void __init __acpi_unmap_table(char *map, unsigned long size)
 	early_iounmap(map, size);
 }
 
-#ifdef CONFIG_PCI_MMCONFIG
-
-static int acpi_mcfg_64bit_base_addr __initdata = FALSE;
-
-/* The physical address of the MMCONFIG aperture.  Set from ACPI tables. */
-struct acpi_mcfg_allocation *pci_mmcfg_config;
-int pci_mmcfg_config_num;
-
-static int __init acpi_mcfg_oem_check(struct acpi_table_mcfg *mcfg)
-{
-	if (!strcmp(mcfg->header.oem_id, "SGI"))
-		acpi_mcfg_64bit_base_addr = TRUE;
-
-	return 0;
-}
-
-int __init acpi_parse_mcfg(struct acpi_table_header *header)
-{
-	struct acpi_table_mcfg *mcfg;
-	unsigned long i;
-	int config_size;
-
-	if (!header)
-		return -EINVAL;
-
-	mcfg = (struct acpi_table_mcfg *)header;
-
-	/* how many config structures do we have */
-	pci_mmcfg_config_num = 0;
-	i = header->length - sizeof(struct acpi_table_mcfg);
-	while (i >= sizeof(struct acpi_mcfg_allocation)) {
-		++pci_mmcfg_config_num;
-		i -= sizeof(struct acpi_mcfg_allocation);
-	};
-	if (pci_mmcfg_config_num == 0) {
-		printk(KERN_ERR PREFIX "MMCONFIG has no entries\n");
-		return -ENODEV;
-	}
-
-	config_size = pci_mmcfg_config_num * sizeof(*pci_mmcfg_config);
-	pci_mmcfg_config = kmalloc(config_size, GFP_KERNEL);
-	if (!pci_mmcfg_config) {
-		printk(KERN_WARNING PREFIX
-		       "No memory for MCFG config tables\n");
-		return -ENOMEM;
-	}
-
-	memcpy(pci_mmcfg_config, &mcfg[1], config_size);
-
-	acpi_mcfg_oem_check(mcfg);
-
-	for (i = 0; i < pci_mmcfg_config_num; ++i) {
-		if ((pci_mmcfg_config[i].address > 0xFFFFFFFF) &&
-		    !acpi_mcfg_64bit_base_addr) {
-			printk(KERN_ERR PREFIX
-			       "MMCONFIG not in low 4GB of memory\n");
-			kfree(pci_mmcfg_config);
-			pci_mmcfg_config_num = 0;
-			return -ENODEV;
-		}
-	}
-
-	return 0;
-}
-#endif				/* CONFIG_PCI_MMCONFIG */
-
 #ifdef CONFIG_X86_LOCAL_APIC
 static int __init acpi_parse_madt(struct acpi_table_header *table)
 {
@@ -522,7 +453,7 @@ int acpi_gsi_to_irq(u32 gsi, unsigned int *irq)
  * success: return IRQ number (>=0)
  * failure: return < 0
  */
-int acpi_register_gsi(u32 gsi, int triggering, int polarity)
+int acpi_register_gsi(struct device *dev, u32 gsi, int trigger, int polarity)
 {
 	unsigned int irq;
 	unsigned int plat_gsi = gsi;
@@ -532,14 +463,14 @@ int acpi_register_gsi(u32 gsi, int triggering, int polarity)
 	 * Make sure all (legacy) PCI IRQs are set as level-triggered.
 	 */
 	if (acpi_irq_model == ACPI_IRQ_MODEL_PIC) {
-		if (triggering == ACPI_LEVEL_SENSITIVE)
+		if (trigger == ACPI_LEVEL_SENSITIVE)
 			eisa_set_level_irq(gsi);
 	}
 #endif
 
 #ifdef CONFIG_X86_IO_APIC
 	if (acpi_irq_model == ACPI_IRQ_MODEL_IOAPIC) {
-		plat_gsi = mp_register_gsi(gsi, triggering, polarity);
+		plat_gsi = mp_register_gsi(dev, gsi, trigger, polarity);
 	}
 #endif
 	acpi_gsi_to_irq(plat_gsi, &irq);
@@ -903,10 +834,8 @@ extern int es7000_plat;
 #endif
 
 static struct {
-	int apic_id;
 	int gsi_base;
 	int gsi_end;
-	DECLARE_BITMAP(pin_programmed, MP_MAX_IOAPIC_PIN + 1);
 } mp_ioapic_routing[MAX_IO_APICS];
 
 int mp_find_ioapic(int gsi)
@@ -986,16 +915,12 @@ void __init mp_register_ioapic(int id, u32 address, u32 gsi_base)
 
 	set_fixmap_nocache(FIX_IO_APIC_BASE_0 + idx, address);
 	mp_ioapics[idx].apicid = uniq_ioapic_id(id);
-#ifdef CONFIG_X86_32
 	mp_ioapics[idx].apicver = io_apic_get_version(idx);
-#else
-	mp_ioapics[idx].apicver = 0;
-#endif
+
 	/*
 	 * Build basic GSI lookup table to facilitate gsi->io_apic lookups
 	 * and to prevent reprogramming of IOAPIC pins (PCI GSIs).
 	 */
-	mp_ioapic_routing[idx].apic_id = mp_ioapics[idx].apicid;
 	mp_ioapic_routing[idx].gsi_base = gsi_base;
 	mp_ioapic_routing[idx].gsi_end = gsi_base +
 	    io_apic_get_redir_entries(idx);
@@ -1158,26 +1083,52 @@ void __init mp_config_acpi_legacy_irqs(void)
 	}
 }
 
-int mp_register_gsi(u32 gsi, int triggering, int polarity)
+static int mp_config_acpi_gsi(struct device *dev, u32 gsi, int trigger,
+			int polarity)
 {
+#ifdef CONFIG_X86_MPPARSE
+	struct mpc_intsrc mp_irq;
+	struct pci_dev *pdev;
+	unsigned char number;
+	unsigned int devfn;
 	int ioapic;
-	int ioapic_pin;
-#ifdef CONFIG_X86_32
-#define MAX_GSI_NUM	4096
-#define IRQ_COMPRESSION_START	64
+	u8 pin;
 
-	static int pci_irq = IRQ_COMPRESSION_START;
-	/*
-	 * Mapping between Global System Interrupts, which
-	 * represent all possible interrupts, and IRQs
-	 * assigned to actual devices.
-	 */
-	static int gsi_to_irq[MAX_GSI_NUM];
-#else
+	if (!acpi_ioapic)
+		return 0;
+	if (!dev)
+		return 0;
+	if (dev->bus != &pci_bus_type)
+		return 0;
+
+	pdev = to_pci_dev(dev);
+	number = pdev->bus->number;
+	devfn = pdev->devfn;
+	pin = pdev->pin;
+	/* print the entry should happen on mptable identically */
+	mp_irq.type = MP_INTSRC;
+	mp_irq.irqtype = mp_INT;
+	mp_irq.irqflag = (trigger == ACPI_EDGE_SENSITIVE ? 4 : 0x0c) |
+				(polarity == ACPI_ACTIVE_HIGH ? 1 : 3);
+	mp_irq.srcbus = number;
+	mp_irq.srcbusirq = (((devfn >> 3) & 0x1f) << 2) | ((pin - 1) & 3);
+	ioapic = mp_find_ioapic(gsi);
+	mp_irq.dstapic = mp_ioapics[ioapic].apicid;
+	mp_irq.dstirq = mp_find_ioapic_pin(ioapic, gsi);
+
+	save_mp_irq(&mp_irq);
+#endif
+	return 0;
+}
+
+int mp_register_gsi(struct device *dev, u32 gsi, int trigger, int polarity)
+{
+	int ioapic;
+	int ioapic_pin;
+	struct io_apic_irq_attr irq_attr;
 
 	if (acpi_irq_model != ACPI_IRQ_MODEL_IOAPIC)
 		return gsi;
-#endif
 
 	/* Don't set up the ACPI SCI because it's already set up */
 	if (acpi_gbl_FADT.sci_interrupt == gsi)
@@ -1196,93 +1147,22 @@ int mp_register_gsi(u32 gsi, int triggering, int polarity)
 		gsi = ioapic_renumber_irq(ioapic, gsi);
 #endif
 
-	/*
-	 * Avoid pin reprogramming.  PRTs typically include entries
-	 * with redundant pin->gsi mappings (but unique PCI devices);
-	 * we only program the IOAPIC on the first.
-	 */
 	if (ioapic_pin > MP_MAX_IOAPIC_PIN) {
 		printk(KERN_ERR "Invalid reference to IOAPIC pin "
-		       "%d-%d\n", mp_ioapic_routing[ioapic].apic_id,
+		       "%d-%d\n", mp_ioapics[ioapic].apicid,
 		       ioapic_pin);
 		return gsi;
 	}
-	if (test_bit(ioapic_pin, mp_ioapic_routing[ioapic].pin_programmed)) {
-		pr_debug("Pin %d-%d already programmed\n",
-			 mp_ioapic_routing[ioapic].apic_id, ioapic_pin);
-#ifdef CONFIG_X86_32
-		return (gsi < IRQ_COMPRESSION_START ? gsi : gsi_to_irq[gsi]);
-#else
-		return gsi;
-#endif
-	}
 
-	set_bit(ioapic_pin, mp_ioapic_routing[ioapic].pin_programmed);
-#ifdef CONFIG_X86_32
-	/*
-	 * For GSI >= 64, use IRQ compression
-	 */
-	if ((gsi >= IRQ_COMPRESSION_START)
-	    && (triggering == ACPI_LEVEL_SENSITIVE)) {
-		/*
-		 * For PCI devices assign IRQs in order, avoiding gaps
-		 * due to unused I/O APIC pins.
-		 */
-		int irq = gsi;
-		if (gsi < MAX_GSI_NUM) {
-			/*
-			 * Retain the VIA chipset work-around (gsi > 15), but
-			 * avoid a problem where the 8254 timer (IRQ0) is setup
-			 * via an override (so it's not on pin 0 of the ioapic),
-			 * and at the same time, the pin 0 interrupt is a PCI
-			 * type.  The gsi > 15 test could cause these two pins
-			 * to be shared as IRQ0, and they are not shareable.
-			 * So test for this condition, and if necessary, avoid
-			 * the pin collision.
-			 */
-			gsi = pci_irq++;
-			/*
-			 * Don't assign IRQ used by ACPI SCI
-			 */
-			if (gsi == acpi_gbl_FADT.sci_interrupt)
-				gsi = pci_irq++;
-			gsi_to_irq[irq] = gsi;
-		} else {
-			printk(KERN_ERR "GSI %u is too high\n", gsi);
-			return gsi;
-		}
-	}
-#endif
-	io_apic_set_pci_routing(ioapic, ioapic_pin, gsi,
-				triggering == ACPI_EDGE_SENSITIVE ? 0 : 1,
-				polarity == ACPI_ACTIVE_HIGH ? 0 : 1);
-	return gsi;
-}
+	if (enable_update_mptable)
+		mp_config_acpi_gsi(dev, gsi, trigger, polarity);
 
-int mp_config_acpi_gsi(unsigned char number, unsigned int devfn, u8 pin,
-			u32 gsi, int triggering, int polarity)
-{
-#ifdef CONFIG_X86_MPPARSE
-	struct mpc_intsrc mp_irq;
-	int ioapic;
-
-	if (!acpi_ioapic)
-		return 0;
+	set_io_apic_irq_attr(&irq_attr, ioapic, ioapic_pin,
+			     trigger == ACPI_EDGE_SENSITIVE ? 0 : 1,
+			     polarity == ACPI_ACTIVE_HIGH ? 0 : 1);
+	io_apic_set_pci_routing(dev, gsi, &irq_attr);
 
-	/* print the entry should happen on mptable identically */
-	mp_irq.type = MP_INTSRC;
-	mp_irq.irqtype = mp_INT;
-	mp_irq.irqflag = (triggering == ACPI_EDGE_SENSITIVE ? 4 : 0x0c) |
-				(polarity == ACPI_ACTIVE_HIGH ? 1 : 3);
-	mp_irq.srcbus = number;
-	mp_irq.srcbusirq = (((devfn >> 3) & 0x1f) << 2) | ((pin - 1) & 3);
-	ioapic = mp_find_ioapic(gsi);
-	mp_irq.dstapic = mp_ioapic_routing[ioapic].apic_id;
-	mp_irq.dstirq = mp_find_ioapic_pin(ioapic, gsi);
-
-	save_mp_irq(&mp_irq);
-#endif
-	return 0;
+	return gsi;
 }
 
 /*
@@ -1569,14 +1449,6 @@ static struct dmi_system_id __initdata acpi_dmi_table[] = {
 	 },
 	{
 	 .callback = force_acpi_ht,
-	 .ident = "ASUS P4B266",
-	 .matches = {
-		     DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
-		     DMI_MATCH(DMI_BOARD_NAME, "P4B266"),
-		     },
-	 },
-	{
-	 .callback = force_acpi_ht,
 	 .ident = "ASUS P2B-DS",
 	 .matches = {
 		     DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),