x86, apic: move remaining APIC drivers to arch/x86/kernel/apic/*

Move the 32-bit extended-arch APIC drivers to arch/x86/kernel/apic/
too, and rename apic_64.c to probe_64.c.

Signed-off-by: Ingo Molnar <mingo@elte.hu>

1 files changed, 601 insertions, 0 deletions

diff --git a/arch/x86/kernel/apic/summit_32.c b/arch/x86/kernel/apic/summit_32.c
new file mode 100644
index 00000000000..cfe7b09015d
--- /dev/null
+++ b/arch/x86/kernel/apic/summit_32.c
@@ -0,0 +1,601 @@
+/*
+ * IBM Summit-Specific Code
+ *
+ * Written By: Matthew Dobson, IBM Corporation
+ *
+ * Copyright (c) 2003 IBM Corp.
+ *
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT.  See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Send feedback to <colpatch@us.ibm.com>
+ *
+ */
+
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <asm/io.h>
+#include <asm/bios_ebda.h>
+
+/*
+ * APIC driver for the IBM "Summit" chipset.
+ */
+#include <linux/threads.h>
+#include <linux/cpumask.h>
+#include <asm/mpspec.h>
+#include <asm/apic.h>
+#include <asm/smp.h>
+#include <asm/fixmap.h>
+#include <asm/apicdef.h>
+#include <asm/ipi.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/init.h>
+#include <linux/gfp.h>
+#include <linux/smp.h>
+
+static inline unsigned summit_get_apic_id(unsigned long x)
+{
+	return (x >> 24) & 0xFF;
+}
+
+static inline void summit_send_IPI_mask(const cpumask_t *mask, int vector)
+{
+	default_send_IPI_mask_sequence_logical(mask, vector);
+}
+
+static inline void summit_send_IPI_allbutself(int vector)
+{
+	cpumask_t mask = cpu_online_map;
+	cpu_clear(smp_processor_id(), mask);
+
+	if (!cpus_empty(mask))
+		summit_send_IPI_mask(&mask, vector);
+}
+
+static inline void summit_send_IPI_all(int vector)
+{
+	summit_send_IPI_mask(&cpu_online_map, vector);
+}
+
+#include <asm/tsc.h>
+
+extern int use_cyclone;
+
+#ifdef CONFIG_X86_SUMMIT_NUMA
+extern void setup_summit(void);
+#else
+#define setup_summit()	{}
+#endif
+
+static inline int
+summit_mps_oem_check(struct mpc_table *mpc, char *oem, char *productid)
+{
+	if (!strncmp(oem, "IBM ENSW", 8) &&
+			(!strncmp(productid, "VIGIL SMP", 9)
+			 || !strncmp(productid, "EXA", 3)
+			 || !strncmp(productid, "RUTHLESS SMP", 12))){
+		mark_tsc_unstable("Summit based system");
+		use_cyclone = 1; /*enable cyclone-timer*/
+		setup_summit();
+		return 1;
+	}
+	return 0;
+}
+
+/* Hook from generic ACPI tables.c */
+static inline int summit_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
+{
+	if (!strncmp(oem_id, "IBM", 3) &&
+	    (!strncmp(oem_table_id, "SERVIGIL", 8)
+	     || !strncmp(oem_table_id, "EXA", 3))){
+		mark_tsc_unstable("Summit based system");
+		use_cyclone = 1; /*enable cyclone-timer*/
+		setup_summit();
+		return 1;
+	}
+	return 0;
+}
+
+struct rio_table_hdr {
+	unsigned char version;      /* Version number of this data structure           */
+	                            /* Version 3 adds chassis_num & WP_index           */
+	unsigned char num_scal_dev; /* # of Scalability devices (Twisters for Vigil)   */
+	unsigned char num_rio_dev;  /* # of RIO I/O devices (Cyclones and Winnipegs)   */
+} __attribute__((packed));
+
+struct scal_detail {
+	unsigned char node_id;      /* Scalability Node ID                             */
+	unsigned long CBAR;         /* Address of 1MB register space                   */
+	unsigned char port0node;    /* Node ID port connected to: 0xFF=None            */
+	unsigned char port0port;    /* Port num port connected to: 0,1,2, or 0xFF=None */
+	unsigned char port1node;    /* Node ID port connected to: 0xFF = None          */
+	unsigned char port1port;    /* Port num port connected to: 0,1,2, or 0xFF=None */
+	unsigned char port2node;    /* Node ID port connected to: 0xFF = None          */
+	unsigned char port2port;    /* Port num port connected to: 0,1,2, or 0xFF=None */
+	unsigned char chassis_num;  /* 1 based Chassis number (1 = boot node)          */
+} __attribute__((packed));
+
+struct rio_detail {
+	unsigned char node_id;      /* RIO Node ID                                     */
+	unsigned long BBAR;         /* Address of 1MB register space                   */
+	unsigned char type;         /* Type of device                                  */
+	unsigned char owner_id;     /* For WPEG: Node ID of Cyclone that owns this WPEG*/
+	                            /* For CYC:  Node ID of Twister that owns this CYC */
+	unsigned char port0node;    /* Node ID port connected to: 0xFF=None            */
+	unsigned char port0port;    /* Port num port connected to: 0,1,2, or 0xFF=None */
+	unsigned char port1node;    /* Node ID port connected to: 0xFF=None            */
+	unsigned char port1port;    /* Port num port connected to: 0,1,2, or 0xFF=None */
+	unsigned char first_slot;   /* For WPEG: Lowest slot number below this WPEG    */
+	                            /* For CYC:  0                                     */
+	unsigned char status;       /* For WPEG: Bit 0 = 1 : the XAPIC is used         */
+	                            /*                 = 0 : the XAPIC is not used, ie:*/
+	                            /*                     ints fwded to another XAPIC */
+	                            /*           Bits1:7 Reserved                      */
+	                            /* For CYC:  Bits0:7 Reserved                      */
+	unsigned char WP_index;     /* For WPEG: WPEG instance index - lower ones have */
+	                            /*           lower slot numbers/PCI bus numbers    */
+	                            /* For CYC:  No meaning                            */
+	unsigned char chassis_num;  /* 1 based Chassis number                          */
+	                            /* For LookOut WPEGs this field indicates the      */
+	                            /* Expansion Chassis #, enumerated from Boot       */
+	                            /* Node WPEG external port, then Boot Node CYC     */
+	                            /* external port, then Next Vigil chassis WPEG     */
+	                            /* external port, etc.                             */
+	                            /* Shared Lookouts have only 1 chassis number (the */
+	                            /* first one assigned)                             */
+} __attribute__((packed));
+
+
+typedef enum {
+	CompatTwister = 0,  /* Compatibility Twister               */
+	AltTwister    = 1,  /* Alternate Twister of internal 8-way */
+	CompatCyclone = 2,  /* Compatibility Cyclone               */
+	AltCyclone    = 3,  /* Alternate Cyclone of internal 8-way */
+	CompatWPEG    = 4,  /* Compatibility WPEG                  */
+	AltWPEG       = 5,  /* Second Planar WPEG                  */
+	LookOutAWPEG  = 6,  /* LookOut WPEG                        */
+	LookOutBWPEG  = 7,  /* LookOut WPEG                        */
+} node_type;
+
+static inline int is_WPEG(struct rio_detail *rio){
+	return (rio->type == CompatWPEG || rio->type == AltWPEG ||
+		rio->type == LookOutAWPEG || rio->type == LookOutBWPEG);
+}
+
+
+/* In clustered mode, the high nibble of APIC ID is a cluster number.
+ * The low nibble is a 4-bit bitmap. */
+#define XAPIC_DEST_CPUS_SHIFT	4
+#define XAPIC_DEST_CPUS_MASK	((1u << XAPIC_DEST_CPUS_SHIFT) - 1)
+#define XAPIC_DEST_CLUSTER_MASK	(XAPIC_DEST_CPUS_MASK << XAPIC_DEST_CPUS_SHIFT)
+
+#define SUMMIT_APIC_DFR_VALUE	(APIC_DFR_CLUSTER)
+
+static inline const cpumask_t *summit_target_cpus(void)
+{
+	/* CPU_MASK_ALL (0xff) has undefined behaviour with
+	 * dest_LowestPrio mode logical clustered apic interrupt routing
+	 * Just start on cpu 0.  IRQ balancing will spread load
+	 */
+	return &cpumask_of_cpu(0);
+}
+
+static inline unsigned long
+summit_check_apicid_used(physid_mask_t bitmap, int apicid)
+{
+	return 0;
+}
+
+/* we don't use the phys_cpu_present_map to indicate apicid presence */
+static inline unsigned long summit_check_apicid_present(int bit)
+{
+	return 1;
+}
+
+static inline void summit_init_apic_ldr(void)
+{
+	unsigned long val, id;
+	int count = 0;
+	u8 my_id = (u8)hard_smp_processor_id();
+	u8 my_cluster = APIC_CLUSTER(my_id);
+#ifdef CONFIG_SMP
+	u8 lid;
+	int i;
+
+	/* Create logical APIC IDs by counting CPUs already in cluster. */
+	for (count = 0, i = nr_cpu_ids; --i >= 0; ) {
+		lid = cpu_2_logical_apicid[i];
+		if (lid != BAD_APICID && APIC_CLUSTER(lid) == my_cluster)
+			++count;
+	}
+#endif
+	/* We only have a 4 wide bitmap in cluster mode.  If a deranged
+	 * BIOS puts 5 CPUs in one APIC cluster, we're hosed. */
+	BUG_ON(count >= XAPIC_DEST_CPUS_SHIFT);
+	id = my_cluster | (1UL << count);
+	apic_write(APIC_DFR, SUMMIT_APIC_DFR_VALUE);
+	val = apic_read(APIC_LDR) & ~APIC_LDR_MASK;
+	val |= SET_APIC_LOGICAL_ID(id);
+	apic_write(APIC_LDR, val);
+}
+
+static inline int summit_apic_id_registered(void)
+{
+	return 1;
+}
+
+static inline void summit_setup_apic_routing(void)
+{
+	printk("Enabling APIC mode:  Summit.  Using %d I/O APICs\n",
+						nr_ioapics);
+}
+
+static inline int summit_apicid_to_node(int logical_apicid)
+{
+#ifdef CONFIG_SMP
+	return apicid_2_node[hard_smp_processor_id()];
+#else
+	return 0;
+#endif
+}
+
+/* Mapping from cpu number to logical apicid */
+static inline int summit_cpu_to_logical_apicid(int cpu)
+{
+#ifdef CONFIG_SMP
+	if (cpu >= nr_cpu_ids)
+		return BAD_APICID;
+	return cpu_2_logical_apicid[cpu];
+#else
+	return logical_smp_processor_id();
+#endif
+}
+
+static inline int summit_cpu_present_to_apicid(int mps_cpu)
+{
+	if (mps_cpu < nr_cpu_ids)
+		return (int)per_cpu(x86_bios_cpu_apicid, mps_cpu);
+	else
+		return BAD_APICID;
+}
+
+static inline physid_mask_t
+summit_ioapic_phys_id_map(physid_mask_t phys_id_map)
+{
+	/* For clustered we don't have a good way to do this yet - hack */
+	return physids_promote(0x0F);
+}
+
+static inline physid_mask_t summit_apicid_to_cpu_present(int apicid)
+{
+	return physid_mask_of_physid(0);
+}
+
+static inline void summit_setup_portio_remap(void)
+{
+}
+
+static inline int summit_check_phys_apicid_present(int boot_cpu_physical_apicid)
+{
+	return 1;
+}
+
+static inline unsigned int summit_cpu_mask_to_apicid(const cpumask_t *cpumask)
+{
+	int cpus_found = 0;
+	int num_bits_set;
+	int apicid;
+	int cpu;
+
+	num_bits_set = cpus_weight(*cpumask);
+	/* Return id to all */
+	if (num_bits_set >= nr_cpu_ids)
+		return 0xFF;
+	/*
+	 * The cpus in the mask must all be on the apic cluster.  If are not
+	 * on the same apicid cluster return default value of target_cpus():
+	 */
+	cpu = first_cpu(*cpumask);
+	apicid = summit_cpu_to_logical_apicid(cpu);
+
+	while (cpus_found < num_bits_set) {
+		if (cpu_isset(cpu, *cpumask)) {
+			int new_apicid = summit_cpu_to_logical_apicid(cpu);
+
+			if (APIC_CLUSTER(apicid) != APIC_CLUSTER(new_apicid)) {
+				printk ("%s: Not a valid mask!\n", __func__);
+
+				return 0xFF;
+			}
+			apicid = apicid | new_apicid;
+			cpus_found++;
+		}
+		cpu++;
+	}
+	return apicid;
+}
+
+static inline unsigned int
+summit_cpu_mask_to_apicid_and(const struct cpumask *inmask,
+			      const struct cpumask *andmask)
+{
+	int apicid = summit_cpu_to_logical_apicid(0);
+	cpumask_var_t cpumask;
+
+	if (!alloc_cpumask_var(&cpumask, GFP_ATOMIC))
+		return apicid;
+
+	cpumask_and(cpumask, inmask, andmask);
+	cpumask_and(cpumask, cpumask, cpu_online_mask);
+	apicid = summit_cpu_mask_to_apicid(cpumask);
+
+	free_cpumask_var(cpumask);
+
+	return apicid;
+}
+
+/*
+ * cpuid returns the value latched in the HW at reset, not the APIC ID
+ * register's value.  For any box whose BIOS changes APIC IDs, like
+ * clustered APIC systems, we must use hard_smp_processor_id.
+ *
+ * See Intel's IA-32 SW Dev's Manual Vol2 under CPUID.
+ */
+static inline int summit_phys_pkg_id(int cpuid_apic, int index_msb)
+{
+	return hard_smp_processor_id() >> index_msb;
+}
+
+static int probe_summit(void)
+{
+	/* probed later in mptable/ACPI hooks */
+	return 0;
+}
+
+static void summit_vector_allocation_domain(int cpu, cpumask_t *retmask)
+{
+	/* Careful. Some cpus do not strictly honor the set of cpus
+	 * specified in the interrupt destination when using lowest
+	 * priority interrupt delivery mode.
+	 *
+	 * In particular there was a hyperthreading cpu observed to
+	 * deliver interrupts to the wrong hyperthread when only one
+	 * hyperthread was specified in the interrupt desitination.
+	 */
+	*retmask = (cpumask_t){ { [0] = APIC_ALL_CPUS, } };
+}
+
+#ifdef CONFIG_X86_SUMMIT_NUMA
+static struct rio_table_hdr *rio_table_hdr __initdata;
+static struct scal_detail   *scal_devs[MAX_NUMNODES] __initdata;
+static struct rio_detail    *rio_devs[MAX_NUMNODES*4] __initdata;
+
+#ifndef CONFIG_X86_NUMAQ
+static int mp_bus_id_to_node[MAX_MP_BUSSES] __initdata;
+#endif
+
+static int __init setup_pci_node_map_for_wpeg(int wpeg_num, int last_bus)
+{
+	int twister = 0, node = 0;
+	int i, bus, num_buses;
+
+	for (i = 0; i < rio_table_hdr->num_rio_dev; i++) {
+		if (rio_devs[i]->node_id == rio_devs[wpeg_num]->owner_id) {
+			twister = rio_devs[i]->owner_id;
+			break;
+		}
+	}
+	if (i == rio_table_hdr->num_rio_dev) {
+		printk(KERN_ERR "%s: Couldn't find owner Cyclone for Winnipeg!\n", __func__);
+		return last_bus;
+	}
+
+	for (i = 0; i < rio_table_hdr->num_scal_dev; i++) {
+		if (scal_devs[i]->node_id == twister) {
+			node = scal_devs[i]->node_id;
+			break;
+		}
+	}
+	if (i == rio_table_hdr->num_scal_dev) {
+		printk(KERN_ERR "%s: Couldn't find owner Twister for Cyclone!\n", __func__);
+		return last_bus;
+	}
+
+	switch (rio_devs[wpeg_num]->type) {
+	case CompatWPEG:
+		/*
+		 * The Compatibility Winnipeg controls the 2 legacy buses,
+		 * the 66MHz PCI bus [2 slots] and the 2 "extra" buses in case
+		 * a PCI-PCI bridge card is used in either slot: total 5 buses.
+		 */
+		num_buses = 5;
+		break;
+	case AltWPEG:
+		/*
+		 * The Alternate Winnipeg controls the 2 133MHz buses [1 slot
+		 * each], their 2 "extra" buses, the 100MHz bus [2 slots] and
+		 * the "extra" buses for each of those slots: total 7 buses.
+		 */
+		num_buses = 7;
+		break;
+	case LookOutAWPEG:
+	case LookOutBWPEG:
+		/*
+		 * A Lookout Winnipeg controls 3 100MHz buses [2 slots each]
+		 * & the "extra" buses for each of those slots: total 9 buses.
+		 */
+		num_buses = 9;
+		break;
+	default:
+		printk(KERN_INFO "%s: Unsupported Winnipeg type!\n", __func__);
+		return last_bus;
+	}
+
+	for (bus = last_bus; bus < last_bus + num_buses; bus++)
+		mp_bus_id_to_node[bus] = node;
+	return bus;
+}
+
+static int __init build_detail_arrays(void)
+{
+	unsigned long ptr;
+	int i, scal_detail_size, rio_detail_size;
+
+	if (rio_table_hdr->num_scal_dev > MAX_NUMNODES) {
+		printk(KERN_WARNING "%s: MAX_NUMNODES too low!  Defined as %d, but system has %d nodes.\n", __func__, MAX_NUMNODES, rio_table_hdr->num_scal_dev);
+		return 0;
+	}
+
+	switch (rio_table_hdr->version) {
+	default:
+		printk(KERN_WARNING "%s: Invalid Rio Grande Table Version: %d\n", __func__, rio_table_hdr->version);
+		return 0;
+	case 2:
+		scal_detail_size = 11;
+		rio_detail_size = 13;
+		break;
+	case 3:
+		scal_detail_size = 12;
+		rio_detail_size = 15;
+		break;
+	}
+
+	ptr = (unsigned long)rio_table_hdr + 3;
+	for (i = 0; i < rio_table_hdr->num_scal_dev; i++, ptr += scal_detail_size)
+		scal_devs[i] = (struct scal_detail *)ptr;
+
+	for (i = 0; i < rio_table_hdr->num_rio_dev; i++, ptr += rio_detail_size)
+		rio_devs[i] = (struct rio_detail *)ptr;
+
+	return 1;
+}
+
+void __init setup_summit(void)
+{
+	unsigned long		ptr;
+	unsigned short		offset;
+	int			i, next_wpeg, next_bus = 0;
+
+	/* The pointer to the EBDA is stored in the word @ phys 0x40E(40:0E) */
+	ptr = get_bios_ebda();
+	ptr = (unsigned long)phys_to_virt(ptr);
+
+	rio_table_hdr = NULL;
+	offset = 0x180;
+	while (offset) {
+		/* The block id is stored in the 2nd word */
+		if (*((unsigned short *)(ptr + offset + 2)) == 0x4752) {
+			/* set the pointer past the offset & block id */
+			rio_table_hdr = (struct rio_table_hdr *)(ptr + offset + 4);
+			break;
+		}
+		/* The next offset is stored in the 1st word.  0 means no more */
+		offset = *((unsigned short *)(ptr + offset));
+	}
+	if (!rio_table_hdr) {
+		printk(KERN_ERR "%s: Unable to locate Rio Grande Table in EBDA - bailing!\n", __func__);
+		return;
+	}
+
+	if (!build_detail_arrays())
+		return;
+
+	/* The first Winnipeg we're looking for has an index of 0 */
+	next_wpeg = 0;
+	do {
+		for (i = 0; i < rio_table_hdr->num_rio_dev; i++) {
+			if (is_WPEG(rio_devs[i]) && rio_devs[i]->WP_index == next_wpeg) {
+				/* It's the Winnipeg we're looking for! */
+				next_bus = setup_pci_node_map_for_wpeg(i, next_bus);
+				next_wpeg++;
+				break;
+			}
+		}
+		/*
+		 * If we go through all Rio devices and don't find one with
+		 * the next index, it means we've found all the Winnipegs,
+		 * and thus all the PCI buses.
+		 */
+		if (i == rio_table_hdr->num_rio_dev)
+			next_wpeg = 0;
+	} while (next_wpeg != 0);
+}
+#endif
+
+struct apic apic_summit = {
+
+	.name				= "summit",
+	.probe				= probe_summit,
+	.acpi_madt_oem_check		= summit_acpi_madt_oem_check,
+	.apic_id_registered		= summit_apic_id_registered,
+
+	.irq_delivery_mode		= dest_LowestPrio,
+	/* logical delivery broadcast to all CPUs: */
+	.irq_dest_mode			= 1,
+
+	.target_cpus			= summit_target_cpus,
+	.disable_esr			= 1,
+	.dest_logical			= APIC_DEST_LOGICAL,
+	.check_apicid_used		= summit_check_apicid_used,
+	.check_apicid_present		= summit_check_apicid_present,
+
+	.vector_allocation_domain	= summit_vector_allocation_domain,
+	.init_apic_ldr			= summit_init_apic_ldr,
+
+	.ioapic_phys_id_map		= summit_ioapic_phys_id_map,
+	.setup_apic_routing		= summit_setup_apic_routing,
+	.multi_timer_check		= NULL,
+	.apicid_to_node			= summit_apicid_to_node,
+	.cpu_to_logical_apicid		= summit_cpu_to_logical_apicid,
+	.cpu_present_to_apicid		= summit_cpu_present_to_apicid,
+	.apicid_to_cpu_present		= summit_apicid_to_cpu_present,
+	.setup_portio_remap		= NULL,
+	.check_phys_apicid_present	= summit_check_phys_apicid_present,
+	.enable_apic_mode		= NULL,
+	.phys_pkg_id			= summit_phys_pkg_id,
+	.mps_oem_check			= summit_mps_oem_check,
+
+	.get_apic_id			= summit_get_apic_id,
+	.set_apic_id			= NULL,
+	.apic_id_mask			= 0xFF << 24,
+
+	.cpu_mask_to_apicid		= summit_cpu_mask_to_apicid,
+	.cpu_mask_to_apicid_and		= summit_cpu_mask_to_apicid_and,
+
+	.send_IPI_mask			= summit_send_IPI_mask,
+	.send_IPI_mask_allbutself	= NULL,
+	.send_IPI_allbutself		= summit_send_IPI_allbutself,
+	.send_IPI_all			= summit_send_IPI_all,
+	.send_IPI_self			= default_send_IPI_self,
+
+	.wakeup_cpu			= NULL,
+	.trampoline_phys_low		= DEFAULT_TRAMPOLINE_PHYS_LOW,
+	.trampoline_phys_high		= DEFAULT_TRAMPOLINE_PHYS_HIGH,
+
+	.wait_for_init_deassert		= default_wait_for_init_deassert,
+
+	.smp_callin_clear_local_apic	= NULL,
+	.inquire_remote_apic		= default_inquire_remote_apic,
+
+	.read				= native_apic_mem_read,
+	.write				= native_apic_mem_write,
+	.icr_read			= native_apic_icr_read,
+	.icr_write			= native_apic_icr_write,
+	.wait_icr_idle			= native_apic_wait_icr_idle,
+	.safe_wait_icr_idle		= native_safe_apic_wait_icr_idle,
+};