x86, UV: Add support for SGI UV2 hub chip

This patch adds support for a new version of the SGI UV hub
chip. The hub chip is the node controller that connects multiple
blades into a larger coherent SSI.

For the most part, UV2 is compatible with UV1. The majority of
the changes are in the addresses of MMRs and in a few cases, the
contents of MMRs. These changes are the result in changes in the
system topology such as node configuration, processor types,
maximum nodes, physical address sizes, etc.

Signed-off-by: Jack Steiner <steiner@sgi.com>
Link: http://lkml.kernel.org/r/20110511175028.GA18006@sgi.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>

1 files changed, 31 insertions, 9 deletions

diff --git a/arch/x86/kernel/apic/x2apic_uv_x.c b/arch/x86/kernel/apic/x2apic_uv_x.c
index f450b683dfc..b511a011b7d 100644
--- a/arch/x86/kernel/apic/x2apic_uv_x.c
+++ b/arch/x86/kernel/apic/x2apic_uv_x.c
@@ -91,6 +91,10 @@ static int __init early_get_pnodeid(void)
 	m_n_config.v = uv_early_read_mmr(UVH_RH_GAM_CONFIG_MMR);
 	uv_min_hub_revision_id = node_id.s.revision;
 
+	if (node_id.s.part_number == UV2_HUB_PART_NUMBER)
+		uv_min_hub_revision_id += UV2_HUB_REVISION_BASE - 1;
+
+	uv_hub_info->hub_revision = uv_min_hub_revision_id;
 	pnode = (node_id.s.node_id >> 1) & ((1 << m_n_config.s.n_skt) - 1);
 	return pnode;
 }
@@ -112,17 +116,25 @@ static void __init early_get_apic_pnode_shift(void)
  */
 static void __init uv_set_apicid_hibit(void)
 {
-	union uvh_lb_target_physical_apic_id_mask_u apicid_mask;
+	union uv1h_lb_target_physical_apic_id_mask_u apicid_mask;
 
-	apicid_mask.v = uv_early_read_mmr(UVH_LB_TARGET_PHYSICAL_APIC_ID_MASK);
-	uv_apicid_hibits = apicid_mask.s.bit_enables & UV_APICID_HIBIT_MASK;
+	if (is_uv1_hub()) {
+		apicid_mask.v =
+			uv_early_read_mmr(UV1H_LB_TARGET_PHYSICAL_APIC_ID_MASK);
+		uv_apicid_hibits =
+			apicid_mask.s1.bit_enables & UV_APICID_HIBIT_MASK;
+	}
 }
 
 static int __init uv_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
 {
-	int pnodeid;
+	int pnodeid, is_uv1, is_uv2;
 
-	if (!strcmp(oem_id, "SGI")) {
+	is_uv1 = !strcmp(oem_id, "SGI");
+	is_uv2 = !strcmp(oem_id, "SGI2");
+	if (is_uv1 || is_uv2) {
+		uv_hub_info->hub_revision =
+			is_uv1 ? UV1_HUB_REVISION_BASE : UV2_HUB_REVISION_BASE;
 		pnodeid = early_get_pnodeid();
 		early_get_apic_pnode_shift();
 		x86_platform.is_untracked_pat_range =  uv_is_untracked_pat_range;
@@ -484,12 +496,19 @@ static __init void map_mmr_high(int max_pnode)
 static __init void map_mmioh_high(int max_pnode)
 {
 	union uvh_rh_gam_mmioh_overlay_config_mmr_u mmioh;
-	int shift = UVH_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR_BASE_SHFT;
+	int shift;
 
 	mmioh.v = uv_read_local_mmr(UVH_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR);
-	if (mmioh.s.enable)
-		map_high("MMIOH", mmioh.s.base, shift, mmioh.s.m_io,
+	if (is_uv1_hub() && mmioh.s1.enable) {
+		shift = UV1H_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR_BASE_SHFT;
+		map_high("MMIOH", mmioh.s1.base, shift, mmioh.s1.m_io,
+			max_pnode, map_uc);
+	}
+	if (is_uv2_hub() && mmioh.s2.enable) {
+		shift = UV2H_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR_BASE_SHFT;
+		map_high("MMIOH", mmioh.s2.base, shift, mmioh.s2.m_io,
 			max_pnode, map_uc);
+	}
 }
 
 static __init void map_low_mmrs(void)
@@ -736,13 +755,14 @@ void __init uv_system_init(void)
 	unsigned long mmr_base, present, paddr;
 	unsigned short pnode_mask, pnode_io_mask;
 
+	printk(KERN_INFO "UV: Found %s hub\n", is_uv1_hub() ? "UV1" : "UV2");
 	map_low_mmrs();
 
 	m_n_config.v = uv_read_local_mmr(UVH_RH_GAM_CONFIG_MMR );
 	m_val = m_n_config.s.m_skt;
 	n_val = m_n_config.s.n_skt;
 	mmioh.v = uv_read_local_mmr(UVH_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR);
-	n_io = mmioh.s.n_io;
+	n_io = is_uv1_hub() ? mmioh.s1.n_io : mmioh.s2.n_io;
 	mmr_base =
 	    uv_read_local_mmr(UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR) &
 	    ~UV_MMR_ENABLE;
@@ -811,6 +831,8 @@ void __init uv_system_init(void)
 		 */
 		uv_cpu_hub_info(cpu)->pnode_mask = pnode_mask;
 		uv_cpu_hub_info(cpu)->apic_pnode_shift = uvh_apicid.s.pnode_shift;
+		uv_cpu_hub_info(cpu)->hub_revision = uv_hub_info->hub_revision;
+
 		pnode = uv_apicid_to_pnode(apicid);
 		blade = boot_pnode_to_blade(pnode);
 		lcpu = uv_blade_info[blade].nr_possible_cpus;