spelling fixes: arch/i386/

Spelling fixes in arch/i386/.

Signed-off-by: Simon Arlott <simon@fire.lp0.eu>
Signed-off-by: Adrian Bunk <bunk@kernel.org>

4 files changed, 8 insertions, 8 deletions

diff --git a/arch/x86/kernel/cpu/cpufreq/cpufreq-nforce2.c b/arch/x86/kernel/cpu/cpufreq/cpufreq-nforce2.c
index 32f0bda3fc9..f03e9153618 100644
--- a/arch/x86/kernel/cpu/cpufreq/cpufreq-nforce2.c
+++ b/arch/x86/kernel/cpu/cpufreq/cpufreq-nforce2.c
@@ -260,7 +260,7 @@ static int nforce2_target(struct cpufreq_policy *policy,
 
 	freqs.old = nforce2_get(policy->cpu);
 	freqs.new = target_fsb * fid * 100;
-	freqs.cpu = 0;		/* Only one CPU on nForce2 plattforms */
+	freqs.cpu = 0;		/* Only one CPU on nForce2 platforms */
 
 	if (freqs.old == freqs.new)
 		return 0;
diff --git a/arch/x86/kernel/cpu/cpufreq/gx-suspmod.c b/arch/x86/kernel/cpu/cpufreq/gx-suspmod.c
index ed2bda127c4..2ed7db2fd25 100644
--- a/arch/x86/kernel/cpu/cpufreq/gx-suspmod.c
+++ b/arch/x86/kernel/cpu/cpufreq/gx-suspmod.c
@@ -12,12 +12,12 @@
  *      of any nature resulting due to the use of this software. This
  *      software is provided AS-IS with no warranties.
  *
- * Theoritical note:
+ * Theoretical note:
  *
  *	(see Geode(tm) CS5530 manual (rev.4.1) page.56)
  *
  *	CPU frequency control on NatSemi Geode GX1/GXLV processor and CS55x0
- *	are based on Suspend Moduration.
+ *	are based on Suspend Modulation.
  *
  *	Suspend Modulation works by asserting and de-asserting the SUSP# pin
  *	to CPU(GX1/GXLV) for configurable durations. When asserting SUSP#
@@ -101,11 +101,11 @@
 
 /* SUSCFG bits */
 #define SUSMOD		(1<<0)	/* enable/disable suspend modulation */
-/* the belows support only with cs5530 (after rev.1.2)/cs5530A */
+/* the below is supported only with cs5530 (after rev.1.2)/cs5530A */
 #define SMISPDUP	(1<<1)	/* select how SMI re-enable suspend modulation: */
 				/* IRQTC timer or read SMI speedup disable reg.(F1BAR[08-09h]) */
 #define SUSCFG		(1<<2)	/* enable powering down a GXLV processor. "Special 3Volt Suspend" mode */
-/* the belows support only with cs5530A */
+/* the below is supported only with cs5530A */
 #define PWRSVE_ISA	(1<<3)	/* stop ISA clock  */
 #define PWRSVE		(1<<4)	/* active idle */
 
diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
index c06ac680c9c..9c36a53676b 100644
--- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
+++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
@@ -168,7 +168,7 @@ static void count_off_irt(struct powernow_k8_data *data)
 	return;
 }
 
-/* the voltage stabalization time */
+/* the voltage stabilization time */
 static void count_off_vst(struct powernow_k8_data *data)
 {
 	udelay(data->vstable * VST_UNITS_20US);
diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.h b/arch/x86/kernel/cpu/cpufreq/powernow-k8.h
index b06c812208c..7c4f6e0faed 100644
--- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.h
+++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.h
@@ -148,10 +148,10 @@ struct powernow_k8_data {
 #define PLL_LOCK_CONVERSION (1000/5) /* ms to ns, then divide by clock period */
 
 #define MAXIMUM_VID_STEPS 1  /* Current cpus only allow a single step of 25mV */
-#define VST_UNITS_20US 20   /* Voltage Stabalization Time is in units of 20us */
+#define VST_UNITS_20US 20   /* Voltage Stabilization Time is in units of 20us */
 
 /*
- * Most values of interest are enocoded in a single field of the _PSS
+ * Most values of interest are encoded in a single field of the _PSS
  * entries: the "control" value.
  */