x86: automatical unification of i8259.c

Make conversion of i8259 very mechanical -- i8259 was generated by
 diff -D, with too different parts left in i8259_32 and
i8259_64.c. Only "by hand" changes were removal of #ifdef from middle
of the comment (prevented compilation) and removal of one static to
allow splitting into files.

Of course, it will need some cleanups now, and those will follow.

Signed-of-by: Pavel Machek <pavel@suse.cz>

1 files changed, 368 insertions, 0 deletions

diff --git a/arch/x86/kernel/i8259.c b/arch/x86/kernel/i8259.c
new file mode 100644
index 00000000000..2decba6b010
--- /dev/null
+++ b/arch/x86/kernel/i8259.c
@@ -0,0 +1,368 @@
+#ifdef CONFIG_X86_64
+#include <linux/linkage.h>
+#endif /* CONFIG_X86_64 */
+#include <linux/errno.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/ioport.h>
+#include <linux/interrupt.h>
+#ifdef CONFIG_X86_64
+#include <linux/timex.h>
+#endif /* CONFIG_X86_64 */
+#include <linux/slab.h>
+#include <linux/random.h>
+#include <linux/init.h>
+#include <linux/kernel_stat.h>
+#include <linux/sysdev.h>
+#include <linux/bitops.h>
+
+#ifdef CONFIG_X86_64
+#include <asm/acpi.h>
+#endif /* CONFIG_X86_64 */
+#include <asm/atomic.h>
+#include <asm/system.h>
+#include <asm/io.h>
+#ifndef CONFIG_X86_64
+#include <asm/timer.h>
+#else /* CONFIG_X86_64 */
+#include <asm/hw_irq.h>
+#endif /* CONFIG_X86_64 */
+#include <asm/pgtable.h>
+#include <asm/delay.h>
+#include <asm/desc.h>
+#include <asm/apic.h>
+#ifndef CONFIG_X86_64
+#include <asm/arch_hooks.h>
+#endif /* ! CONFIG_X86_64 */
+#include <asm/i8259.h>
+
+/*
+ * This is the 'legacy' 8259A Programmable Interrupt Controller,
+ * present in the majority of PC/AT boxes.
+ * plus some generic x86 specific things if generic specifics makes
+ * any sense at all.
+ */
+
+static int i8259A_auto_eoi;
+DEFINE_SPINLOCK(i8259A_lock);
+static void mask_and_ack_8259A(unsigned int);
+
+struct irq_chip i8259A_chip = {
+	.name		= "XT-PIC",
+	.mask		= disable_8259A_irq,
+	.disable	= disable_8259A_irq,
+	.unmask		= enable_8259A_irq,
+	.mask_ack	= mask_and_ack_8259A,
+};
+
+/*
+ * 8259A PIC functions to handle ISA devices:
+ */
+
+/*
+ * This contains the irq mask for both 8259A irq controllers,
+ */
+unsigned int cached_irq_mask = 0xffff;
+
+/*
+ * Not all IRQs can be routed through the IO-APIC, eg. on certain (older)
+ * boards the timer interrupt is not really connected to any IO-APIC pin,
+ * it's fed to the master 8259A's IR0 line only.
+ *
+ * Any '1' bit in this mask means the IRQ is routed through the IO-APIC.
+ * this 'mixed mode' IRQ handling costs nothing because it's only used
+ * at IRQ setup time.
+ */
+unsigned long io_apic_irqs;
+
+void disable_8259A_irq(unsigned int irq)
+{
+	unsigned int mask = 1 << irq;
+	unsigned long flags;
+
+	spin_lock_irqsave(&i8259A_lock, flags);
+	cached_irq_mask |= mask;
+	if (irq & 8)
+		outb(cached_slave_mask, PIC_SLAVE_IMR);
+	else
+		outb(cached_master_mask, PIC_MASTER_IMR);
+	spin_unlock_irqrestore(&i8259A_lock, flags);
+}
+
+void enable_8259A_irq(unsigned int irq)
+{
+	unsigned int mask = ~(1 << irq);
+	unsigned long flags;
+
+	spin_lock_irqsave(&i8259A_lock, flags);
+	cached_irq_mask &= mask;
+	if (irq & 8)
+		outb(cached_slave_mask, PIC_SLAVE_IMR);
+	else
+		outb(cached_master_mask, PIC_MASTER_IMR);
+	spin_unlock_irqrestore(&i8259A_lock, flags);
+}
+
+int i8259A_irq_pending(unsigned int irq)
+{
+	unsigned int mask = 1<<irq;
+	unsigned long flags;
+	int ret;
+
+	spin_lock_irqsave(&i8259A_lock, flags);
+	if (irq < 8)
+		ret = inb(PIC_MASTER_CMD) & mask;
+	else
+		ret = inb(PIC_SLAVE_CMD) & (mask >> 8);
+	spin_unlock_irqrestore(&i8259A_lock, flags);
+
+	return ret;
+}
+
+void make_8259A_irq(unsigned int irq)
+{
+	disable_irq_nosync(irq);
+	io_apic_irqs &= ~(1<<irq);
+	set_irq_chip_and_handler_name(irq, &i8259A_chip, handle_level_irq,
+				      "XT");
+	enable_irq(irq);
+}
+
+/*
+ * This function assumes to be called rarely. Switching between
+ * 8259A registers is slow.
+ * This has to be protected by the irq controller spinlock
+ * before being called.
+ */
+static inline int i8259A_irq_real(unsigned int irq)
+{
+	int value;
+	int irqmask = 1<<irq;
+
+	if (irq < 8) {
+		outb(0x0B,PIC_MASTER_CMD);	/* ISR register */
+		value = inb(PIC_MASTER_CMD) & irqmask;
+		outb(0x0A,PIC_MASTER_CMD);	/* back to the IRR register */
+		return value;
+	}
+	outb(0x0B,PIC_SLAVE_CMD);	/* ISR register */
+	value = inb(PIC_SLAVE_CMD) & (irqmask >> 8);
+	outb(0x0A,PIC_SLAVE_CMD);	/* back to the IRR register */
+	return value;
+}
+
+/*
+ * Careful! The 8259A is a fragile beast, it pretty
+ * much _has_ to be done exactly like this (mask it
+ * first, _then_ send the EOI, and the order of EOI
+ * to the two 8259s is important!
+ */
+static void mask_and_ack_8259A(unsigned int irq)
+{
+	unsigned int irqmask = 1 << irq;
+	unsigned long flags;
+
+	spin_lock_irqsave(&i8259A_lock, flags);
+	/*
+	 * Lightweight spurious IRQ detection. We do not want
+	 * to overdo spurious IRQ handling - it's usually a sign
+	 * of hardware problems, so we only do the checks we can
+	 * do without slowing down good hardware unnecessarily.
+	 *
+	 * Note that IRQ7 and IRQ15 (the two spurious IRQs
+	 * usually resulting from the 8259A-1|2 PICs) occur
+	 * even if the IRQ is masked in the 8259A. Thus we
+	 * can check spurious 8259A IRQs without doing the
+	 * quite slow i8259A_irq_real() call for every IRQ.
+	 * This does not cover 100% of spurious interrupts,
+	 * but should be enough to warn the user that there
+	 * is something bad going on ...
+	 */
+	if (cached_irq_mask & irqmask)
+		goto spurious_8259A_irq;
+	cached_irq_mask |= irqmask;
+
+handle_real_irq:
+	if (irq & 8) {
+		inb(PIC_SLAVE_IMR);	/* DUMMY - (do we need this?) */
+		outb(cached_slave_mask, PIC_SLAVE_IMR);
+#ifndef CONFIG_X86_64
+		outb(0x60+(irq&7),PIC_SLAVE_CMD);/* 'Specific EOI' to slave */
+		outb(0x60+PIC_CASCADE_IR,PIC_MASTER_CMD); /* 'Specific EOI' to master-IRQ2 */
+#else /* CONFIG_X86_64 */
+		/* 'Specific EOI' to slave */
+		outb(0x60+(irq&7),PIC_SLAVE_CMD);
+		 /* 'Specific EOI' to master-IRQ2 */
+		outb(0x60+PIC_CASCADE_IR,PIC_MASTER_CMD);
+#endif /* CONFIG_X86_64 */
+	} else {
+		inb(PIC_MASTER_IMR);	/* DUMMY - (do we need this?) */
+		outb(cached_master_mask, PIC_MASTER_IMR);
+#ifndef CONFIG_X86_64
+		outb(0x60+irq,PIC_MASTER_CMD);	/* 'Specific EOI to master */
+#else /* CONFIG_X86_64 */
+		/* 'Specific EOI' to master */
+		outb(0x60+irq,PIC_MASTER_CMD);
+#endif /* CONFIG_X86_64 */
+	}
+	spin_unlock_irqrestore(&i8259A_lock, flags);
+	return;
+
+spurious_8259A_irq:
+	/*
+	 * this is the slow path - should happen rarely.
+	 */
+	if (i8259A_irq_real(irq))
+		/*
+		 * oops, the IRQ _is_ in service according to the
+		 * 8259A - not spurious, go handle it.
+		 */
+		goto handle_real_irq;
+
+	{
+		static int spurious_irq_mask;
+		/*
+		 * At this point we can be sure the IRQ is spurious,
+		 * lets ACK and report it. [once per IRQ]
+		 */
+		if (!(spurious_irq_mask & irqmask)) {
+#ifndef CONFIG_X86_64
+			printk(KERN_DEBUG "spurious 8259A interrupt: IRQ%d.\n", irq);
+#else /* CONFIG_X86_64 */
+			printk(KERN_DEBUG
+			       "spurious 8259A interrupt: IRQ%d.\n", irq);
+#endif /* CONFIG_X86_64 */
+			spurious_irq_mask |= irqmask;
+		}
+		atomic_inc(&irq_err_count);
+		/*
+		 * Theoretically we do not have to handle this IRQ,
+		 * but in Linux this does not cause problems and is
+		 * simpler for us.
+		 */
+		goto handle_real_irq;
+	}
+}
+
+static char irq_trigger[2];
+/**
+ * ELCR registers (0x4d0, 0x4d1) control edge/level of IRQ
+ */
+static void restore_ELCR(char *trigger)
+{
+	outb(trigger[0], 0x4d0);
+	outb(trigger[1], 0x4d1);
+}
+
+static void save_ELCR(char *trigger)
+{
+	/* IRQ 0,1,2,8,13 are marked as reserved */
+	trigger[0] = inb(0x4d0) & 0xF8;
+	trigger[1] = inb(0x4d1) & 0xDE;
+}
+
+static int i8259A_resume(struct sys_device *dev)
+{
+	init_8259A(i8259A_auto_eoi);
+	restore_ELCR(irq_trigger);
+	return 0;
+}
+
+static int i8259A_suspend(struct sys_device *dev, pm_message_t state)
+{
+	save_ELCR(irq_trigger);
+	return 0;
+}
+
+static int i8259A_shutdown(struct sys_device *dev)
+{
+	/* Put the i8259A into a quiescent state that
+	 * the kernel initialization code can get it
+	 * out of.
+	 */
+	outb(0xff, PIC_MASTER_IMR);	/* mask all of 8259A-1 */
+	outb(0xff, PIC_SLAVE_IMR);	/* mask all of 8259A-1 */
+	return 0;
+}
+
+static struct sysdev_class i8259_sysdev_class = {
+	.name = "i8259",
+	.suspend = i8259A_suspend,
+	.resume = i8259A_resume,
+	.shutdown = i8259A_shutdown,
+};
+
+static struct sys_device device_i8259A = {
+	.id	= 0,
+	.cls	= &i8259_sysdev_class,
+};
+
+static int __init i8259A_init_sysfs(void)
+{
+	int error = sysdev_class_register(&i8259_sysdev_class);
+	if (!error)
+		error = sysdev_register(&device_i8259A);
+	return error;
+}
+
+device_initcall(i8259A_init_sysfs);
+
+void init_8259A(int auto_eoi)
+{
+	unsigned long flags;
+
+	i8259A_auto_eoi = auto_eoi;
+
+	spin_lock_irqsave(&i8259A_lock, flags);
+
+	outb(0xff, PIC_MASTER_IMR);	/* mask all of 8259A-1 */
+	outb(0xff, PIC_SLAVE_IMR);	/* mask all of 8259A-2 */
+
+	/*
+	 * outb_pic - this has to work on a wide range of PC hardware.
+	 */
+	outb_pic(0x11, PIC_MASTER_CMD);	/* ICW1: select 8259A-1 init */
+#ifndef CONFIG_X86_64
+	outb_pic(0x20 + 0, PIC_MASTER_IMR);	/* ICW2: 8259A-1 IR0-7 mapped to 0x20-0x27 */
+	outb_pic(1U << PIC_CASCADE_IR, PIC_MASTER_IMR);	/* 8259A-1 (the master) has a slave on IR2 */
+#else /* CONFIG_X86_64 */
+	/* ICW2: 8259A-1 IR0-7 mapped to 0x30-0x37 */
+	outb_pic(IRQ0_VECTOR, PIC_MASTER_IMR);
+	/* 8259A-1 (the master) has a slave on IR2 */
+	outb_pic(0x04, PIC_MASTER_IMR);
+#endif /* CONFIG_X86_64 */
+	if (auto_eoi)	/* master does Auto EOI */
+		outb_pic(MASTER_ICW4_DEFAULT | PIC_ICW4_AEOI, PIC_MASTER_IMR);
+	else		/* master expects normal EOI */
+		outb_pic(MASTER_ICW4_DEFAULT, PIC_MASTER_IMR);
+
+	outb_pic(0x11, PIC_SLAVE_CMD);	/* ICW1: select 8259A-2 init */
+#ifndef CONFIG_X86_64
+	outb_pic(0x20 + 8, PIC_SLAVE_IMR);	/* ICW2: 8259A-2 IR0-7 mapped to 0x28-0x2f */
+	outb_pic(PIC_CASCADE_IR, PIC_SLAVE_IMR);	/* 8259A-2 is a slave on master's IR2 */
+	outb_pic(SLAVE_ICW4_DEFAULT, PIC_SLAVE_IMR); /* (slave's support for AEOI in flat mode is to be investigated) */
+#else /* CONFIG_X86_64 */
+	/* ICW2: 8259A-2 IR0-7 mapped to 0x38-0x3f */
+	outb_pic(IRQ8_VECTOR, PIC_SLAVE_IMR);
+	/* 8259A-2 is a slave on master's IR2 */
+	outb_pic(PIC_CASCADE_IR, PIC_SLAVE_IMR);
+	/* (slave's support for AEOI in flat mode is to be investigated) */
+	outb_pic(SLAVE_ICW4_DEFAULT, PIC_SLAVE_IMR);
+
+#endif /* CONFIG_X86_64 */
+	if (auto_eoi)
+		/*
+		 * In AEOI mode we just have to mask the interrupt
+		 * when acking.
+		 */
+		i8259A_chip.mask_ack = disable_8259A_irq;
+	else
+		i8259A_chip.mask_ack = mask_and_ack_8259A;
+
+	udelay(100);		/* wait for 8259A to initialize */
+
+	outb(cached_master_mask, PIC_MASTER_IMR); /* restore master IRQ mask */
+	outb(cached_slave_mask, PIC_SLAVE_IMR);	  /* restore slave IRQ mask */
+
+	spin_unlock_irqrestore(&i8259A_lock, flags);
+}