i386: move kernel

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

1 files changed, 343 insertions, 0 deletions

diff --git a/arch/x86/kernel/irq_32.c b/arch/x86/kernel/irq_32.c
new file mode 100644
index 00000000000..dd2b97fc00b
--- /dev/null
+++ b/arch/x86/kernel/irq_32.c
@@ -0,0 +1,343 @@
+/*
+ *	linux/arch/i386/kernel/irq.c
+ *
+ *	Copyright (C) 1992, 1998 Linus Torvalds, Ingo Molnar
+ *
+ * This file contains the lowest level x86-specific interrupt
+ * entry, irq-stacks and irq statistics code. All the remaining
+ * irq logic is done by the generic kernel/irq/ code and
+ * by the x86-specific irq controller code. (e.g. i8259.c and
+ * io_apic.c.)
+ */
+
+#include <linux/module.h>
+#include <linux/seq_file.h>
+#include <linux/interrupt.h>
+#include <linux/kernel_stat.h>
+#include <linux/notifier.h>
+#include <linux/cpu.h>
+#include <linux/delay.h>
+
+#include <asm/apic.h>
+#include <asm/uaccess.h>
+
+DEFINE_PER_CPU_SHARED_ALIGNED(irq_cpustat_t, irq_stat);
+EXPORT_PER_CPU_SYMBOL(irq_stat);
+
+DEFINE_PER_CPU(struct pt_regs *, irq_regs);
+EXPORT_PER_CPU_SYMBOL(irq_regs);
+
+/*
+ * 'what should we do if we get a hw irq event on an illegal vector'.
+ * each architecture has to answer this themselves.
+ */
+void ack_bad_irq(unsigned int irq)
+{
+	printk(KERN_ERR "unexpected IRQ trap at vector %02x\n", irq);
+
+#ifdef CONFIG_X86_LOCAL_APIC
+	/*
+	 * Currently unexpected vectors happen only on SMP and APIC.
+	 * We _must_ ack these because every local APIC has only N
+	 * irq slots per priority level, and a 'hanging, unacked' IRQ
+	 * holds up an irq slot - in excessive cases (when multiple
+	 * unexpected vectors occur) that might lock up the APIC
+	 * completely.
+	 * But only ack when the APIC is enabled -AK
+	 */
+	if (cpu_has_apic)
+		ack_APIC_irq();
+#endif
+}
+
+#ifdef CONFIG_4KSTACKS
+/*
+ * per-CPU IRQ handling contexts (thread information and stack)
+ */
+union irq_ctx {
+	struct thread_info      tinfo;
+	u32                     stack[THREAD_SIZE/sizeof(u32)];
+};
+
+static union irq_ctx *hardirq_ctx[NR_CPUS] __read_mostly;
+static union irq_ctx *softirq_ctx[NR_CPUS] __read_mostly;
+#endif
+
+/*
+ * do_IRQ handles all normal device IRQ's (the special
+ * SMP cross-CPU interrupts have their own specific
+ * handlers).
+ */
+fastcall unsigned int do_IRQ(struct pt_regs *regs)
+{	
+	struct pt_regs *old_regs;
+	/* high bit used in ret_from_ code */
+	int irq = ~regs->orig_eax;
+	struct irq_desc *desc = irq_desc + irq;
+#ifdef CONFIG_4KSTACKS
+	union irq_ctx *curctx, *irqctx;
+	u32 *isp;
+#endif
+
+	if (unlikely((unsigned)irq >= NR_IRQS)) {
+		printk(KERN_EMERG "%s: cannot handle IRQ %d\n",
+					__FUNCTION__, irq);
+		BUG();
+	}
+
+	old_regs = set_irq_regs(regs);
+	irq_enter();
+#ifdef CONFIG_DEBUG_STACKOVERFLOW
+	/* Debugging check for stack overflow: is there less than 1KB free? */
+	{
+		long esp;
+
+		__asm__ __volatile__("andl %%esp,%0" :
+					"=r" (esp) : "0" (THREAD_SIZE - 1));
+		if (unlikely(esp < (sizeof(struct thread_info) + STACK_WARN))) {
+			printk("do_IRQ: stack overflow: %ld\n",
+				esp - sizeof(struct thread_info));
+			dump_stack();
+		}
+	}
+#endif
+
+#ifdef CONFIG_4KSTACKS
+
+	curctx = (union irq_ctx *) current_thread_info();
+	irqctx = hardirq_ctx[smp_processor_id()];
+
+	/*
+	 * this is where we switch to the IRQ stack. However, if we are
+	 * already using the IRQ stack (because we interrupted a hardirq
+	 * handler) we can't do that and just have to keep using the
+	 * current stack (which is the irq stack already after all)
+	 */
+	if (curctx != irqctx) {
+		int arg1, arg2, ebx;
+
+		/* build the stack frame on the IRQ stack */
+		isp = (u32*) ((char*)irqctx + sizeof(*irqctx));
+		irqctx->tinfo.task = curctx->tinfo.task;
+		irqctx->tinfo.previous_esp = current_stack_pointer;
+
+		/*
+		 * Copy the softirq bits in preempt_count so that the
+		 * softirq checks work in the hardirq context.
+		 */
+		irqctx->tinfo.preempt_count =
+			(irqctx->tinfo.preempt_count & ~SOFTIRQ_MASK) |
+			(curctx->tinfo.preempt_count & SOFTIRQ_MASK);
+
+		asm volatile(
+			"       xchgl  %%ebx,%%esp      \n"
+			"       call   *%%edi           \n"
+			"       movl   %%ebx,%%esp      \n"
+			: "=a" (arg1), "=d" (arg2), "=b" (ebx)
+			:  "0" (irq),   "1" (desc),  "2" (isp),
+			   "D" (desc->handle_irq)
+			: "memory", "cc"
+		);
+	} else
+#endif
+		desc->handle_irq(irq, desc);
+
+	irq_exit();
+	set_irq_regs(old_regs);
+	return 1;
+}
+
+#ifdef CONFIG_4KSTACKS
+
+static char softirq_stack[NR_CPUS * THREAD_SIZE]
+		__attribute__((__section__(".bss.page_aligned")));
+
+static char hardirq_stack[NR_CPUS * THREAD_SIZE]
+		__attribute__((__section__(".bss.page_aligned")));
+
+/*
+ * allocate per-cpu stacks for hardirq and for softirq processing
+ */
+void irq_ctx_init(int cpu)
+{
+	union irq_ctx *irqctx;
+
+	if (hardirq_ctx[cpu])
+		return;
+
+	irqctx = (union irq_ctx*) &hardirq_stack[cpu*THREAD_SIZE];
+	irqctx->tinfo.task              = NULL;
+	irqctx->tinfo.exec_domain       = NULL;
+	irqctx->tinfo.cpu               = cpu;
+	irqctx->tinfo.preempt_count     = HARDIRQ_OFFSET;
+	irqctx->tinfo.addr_limit        = MAKE_MM_SEG(0);
+
+	hardirq_ctx[cpu] = irqctx;
+
+	irqctx = (union irq_ctx*) &softirq_stack[cpu*THREAD_SIZE];
+	irqctx->tinfo.task              = NULL;
+	irqctx->tinfo.exec_domain       = NULL;
+	irqctx->tinfo.cpu               = cpu;
+	irqctx->tinfo.preempt_count     = 0;
+	irqctx->tinfo.addr_limit        = MAKE_MM_SEG(0);
+
+	softirq_ctx[cpu] = irqctx;
+
+	printk("CPU %u irqstacks, hard=%p soft=%p\n",
+		cpu,hardirq_ctx[cpu],softirq_ctx[cpu]);
+}
+
+void irq_ctx_exit(int cpu)
+{
+	hardirq_ctx[cpu] = NULL;
+}
+
+extern asmlinkage void __do_softirq(void);
+
+asmlinkage void do_softirq(void)
+{
+	unsigned long flags;
+	struct thread_info *curctx;
+	union irq_ctx *irqctx;
+	u32 *isp;
+
+	if (in_interrupt())
+		return;
+
+	local_irq_save(flags);
+
+	if (local_softirq_pending()) {
+		curctx = current_thread_info();
+		irqctx = softirq_ctx[smp_processor_id()];
+		irqctx->tinfo.task = curctx->task;
+		irqctx->tinfo.previous_esp = current_stack_pointer;
+
+		/* build the stack frame on the softirq stack */
+		isp = (u32*) ((char*)irqctx + sizeof(*irqctx));
+
+		asm volatile(
+			"       xchgl   %%ebx,%%esp     \n"
+			"       call    __do_softirq    \n"
+			"       movl    %%ebx,%%esp     \n"
+			: "=b"(isp)
+			: "0"(isp)
+			: "memory", "cc", "edx", "ecx", "eax"
+		);
+		/*
+		 * Shouldnt happen, we returned above if in_interrupt():
+	 	 */
+		WARN_ON_ONCE(softirq_count());
+	}
+
+	local_irq_restore(flags);
+}
+
+EXPORT_SYMBOL(do_softirq);
+#endif
+
+/*
+ * Interrupt statistics:
+ */
+
+atomic_t irq_err_count;
+
+/*
+ * /proc/interrupts printing:
+ */
+
+int show_interrupts(struct seq_file *p, void *v)
+{
+	int i = *(loff_t *) v, j;
+	struct irqaction * action;
+	unsigned long flags;
+
+	if (i == 0) {
+		seq_printf(p, "           ");
+		for_each_online_cpu(j)
+			seq_printf(p, "CPU%-8d",j);
+		seq_putc(p, '\n');
+	}
+
+	if (i < NR_IRQS) {
+		spin_lock_irqsave(&irq_desc[i].lock, flags);
+		action = irq_desc[i].action;
+		if (!action)
+			goto skip;
+		seq_printf(p, "%3d: ",i);
+#ifndef CONFIG_SMP
+		seq_printf(p, "%10u ", kstat_irqs(i));
+#else
+		for_each_online_cpu(j)
+			seq_printf(p, "%10u ", kstat_cpu(j).irqs[i]);
+#endif
+		seq_printf(p, " %8s", irq_desc[i].chip->name);
+		seq_printf(p, "-%-8s", irq_desc[i].name);
+		seq_printf(p, "  %s", action->name);
+
+		for (action=action->next; action; action = action->next)
+			seq_printf(p, ", %s", action->name);
+
+		seq_putc(p, '\n');
+skip:
+		spin_unlock_irqrestore(&irq_desc[i].lock, flags);
+	} else if (i == NR_IRQS) {
+		seq_printf(p, "NMI: ");
+		for_each_online_cpu(j)
+			seq_printf(p, "%10u ", nmi_count(j));
+		seq_putc(p, '\n');
+#ifdef CONFIG_X86_LOCAL_APIC
+		seq_printf(p, "LOC: ");
+		for_each_online_cpu(j)
+			seq_printf(p, "%10u ",
+				per_cpu(irq_stat,j).apic_timer_irqs);
+		seq_putc(p, '\n');
+#endif
+		seq_printf(p, "ERR: %10u\n", atomic_read(&irq_err_count));
+#if defined(CONFIG_X86_IO_APIC)
+		seq_printf(p, "MIS: %10u\n", atomic_read(&irq_mis_count));
+#endif
+	}
+	return 0;
+}
+
+#ifdef CONFIG_HOTPLUG_CPU
+#include <mach_apic.h>
+
+void fixup_irqs(cpumask_t map)
+{
+	unsigned int irq;
+	static int warned;
+
+	for (irq = 0; irq < NR_IRQS; irq++) {
+		cpumask_t mask;
+		if (irq == 2)
+			continue;
+
+		cpus_and(mask, irq_desc[irq].affinity, map);
+		if (any_online_cpu(mask) == NR_CPUS) {
+			printk("Breaking affinity for irq %i\n", irq);
+			mask = map;
+		}
+		if (irq_desc[irq].chip->set_affinity)
+			irq_desc[irq].chip->set_affinity(irq, mask);
+		else if (irq_desc[irq].action && !(warned++))
+			printk("Cannot set affinity for irq %i\n", irq);
+	}
+
+#if 0
+	barrier();
+	/* Ingo Molnar says: "after the IO-APIC masks have been redirected
+	   [note the nop - the interrupt-enable boundary on x86 is two
+	   instructions from sti] - to flush out pending hardirqs and
+	   IPIs. After this point nothing is supposed to reach this CPU." */
+	__asm__ __volatile__("sti; nop; cli");
+	barrier();
+#else
+	/* That doesn't seem sufficient.  Give it 1ms. */
+	local_irq_enable();
+	mdelay(1);
+	local_irq_disable();
+#endif
+}
+#endif
+