i386: move kernel

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

1 files changed, 413 insertions, 0 deletions

diff --git a/arch/x86/kernel/tsc_32.c b/arch/x86/kernel/tsc_32.c
new file mode 100644
index 00000000000..a39280b4dd3
--- /dev/null
+++ b/arch/x86/kernel/tsc_32.c
@@ -0,0 +1,413 @@
+/*
+ * This code largely moved from arch/i386/kernel/timer/timer_tsc.c
+ * which was originally moved from arch/i386/kernel/time.c.
+ * See comments there for proper credits.
+ */
+
+#include <linux/sched.h>
+#include <linux/clocksource.h>
+#include <linux/workqueue.h>
+#include <linux/cpufreq.h>
+#include <linux/jiffies.h>
+#include <linux/init.h>
+#include <linux/dmi.h>
+
+#include <asm/delay.h>
+#include <asm/tsc.h>
+#include <asm/io.h>
+#include <asm/timer.h>
+
+#include "mach_timer.h"
+
+static int tsc_enabled;
+
+/*
+ * On some systems the TSC frequency does not
+ * change with the cpu frequency. So we need
+ * an extra value to store the TSC freq
+ */
+unsigned int tsc_khz;
+EXPORT_SYMBOL_GPL(tsc_khz);
+
+int tsc_disable;
+
+#ifdef CONFIG_X86_TSC
+static int __init tsc_setup(char *str)
+{
+	printk(KERN_WARNING "notsc: Kernel compiled with CONFIG_X86_TSC, "
+				"cannot disable TSC.\n");
+	return 1;
+}
+#else
+/*
+ * disable flag for tsc. Takes effect by clearing the TSC cpu flag
+ * in cpu/common.c
+ */
+static int __init tsc_setup(char *str)
+{
+	tsc_disable = 1;
+
+	return 1;
+}
+#endif
+
+__setup("notsc", tsc_setup);
+
+/*
+ * code to mark and check if the TSC is unstable
+ * due to cpufreq or due to unsynced TSCs
+ */
+static int tsc_unstable;
+
+int check_tsc_unstable(void)
+{
+	return tsc_unstable;
+}
+EXPORT_SYMBOL_GPL(check_tsc_unstable);
+
+/* Accellerators for sched_clock()
+ * convert from cycles(64bits) => nanoseconds (64bits)
+ *  basic equation:
+ *		ns = cycles / (freq / ns_per_sec)
+ *		ns = cycles * (ns_per_sec / freq)
+ *		ns = cycles * (10^9 / (cpu_khz * 10^3))
+ *		ns = cycles * (10^6 / cpu_khz)
+ *
+ *	Then we use scaling math (suggested by george@mvista.com) to get:
+ *		ns = cycles * (10^6 * SC / cpu_khz) / SC
+ *		ns = cycles * cyc2ns_scale / SC
+ *
+ *	And since SC is a constant power of two, we can convert the div
+ *  into a shift.
+ *
+ *  We can use khz divisor instead of mhz to keep a better percision, since
+ *  cyc2ns_scale is limited to 10^6 * 2^10, which fits in 32 bits.
+ *  (mathieu.desnoyers@polymtl.ca)
+ *
+ *			-johnstul@us.ibm.com "math is hard, lets go shopping!"
+ */
+unsigned long cyc2ns_scale __read_mostly;
+
+#define CYC2NS_SCALE_FACTOR 10 /* 2^10, carefully chosen */
+
+static inline void set_cyc2ns_scale(unsigned long cpu_khz)
+{
+	cyc2ns_scale = (1000000 << CYC2NS_SCALE_FACTOR)/cpu_khz;
+}
+
+/*
+ * Scheduler clock - returns current time in nanosec units.
+ */
+unsigned long long native_sched_clock(void)
+{
+	unsigned long long this_offset;
+
+	/*
+	 * Fall back to jiffies if there's no TSC available:
+	 * ( But note that we still use it if the TSC is marked
+	 *   unstable. We do this because unlike Time Of Day,
+	 *   the scheduler clock tolerates small errors and it's
+	 *   very important for it to be as fast as the platform
+	 *   can achive it. )
+	 */
+	if (unlikely(!tsc_enabled && !tsc_unstable))
+		/* No locking but a rare wrong value is not a big deal: */
+		return (jiffies_64 - INITIAL_JIFFIES) * (1000000000 / HZ);
+
+	/* read the Time Stamp Counter: */
+	rdtscll(this_offset);
+
+	/* return the value in ns */
+	return cycles_2_ns(this_offset);
+}
+
+/* We need to define a real function for sched_clock, to override the
+   weak default version */
+#ifdef CONFIG_PARAVIRT
+unsigned long long sched_clock(void)
+{
+	return paravirt_sched_clock();
+}
+#else
+unsigned long long sched_clock(void)
+	__attribute__((alias("native_sched_clock")));
+#endif
+
+unsigned long native_calculate_cpu_khz(void)
+{
+	unsigned long long start, end;
+	unsigned long count;
+	u64 delta64;
+	int i;
+	unsigned long flags;
+
+	local_irq_save(flags);
+
+	/* run 3 times to ensure the cache is warm */
+	for (i = 0; i < 3; i++) {
+		mach_prepare_counter();
+		rdtscll(start);
+		mach_countup(&count);
+		rdtscll(end);
+	}
+	/*
+	 * Error: ECTCNEVERSET
+	 * The CTC wasn't reliable: we got a hit on the very first read,
+	 * or the CPU was so fast/slow that the quotient wouldn't fit in
+	 * 32 bits..
+	 */
+	if (count <= 1)
+		goto err;
+
+	delta64 = end - start;
+
+	/* cpu freq too fast: */
+	if (delta64 > (1ULL<<32))
+		goto err;
+
+	/* cpu freq too slow: */
+	if (delta64 <= CALIBRATE_TIME_MSEC)
+		goto err;
+
+	delta64 += CALIBRATE_TIME_MSEC/2; /* round for do_div */
+	do_div(delta64,CALIBRATE_TIME_MSEC);
+
+	local_irq_restore(flags);
+	return (unsigned long)delta64;
+err:
+	local_irq_restore(flags);
+	return 0;
+}
+
+int recalibrate_cpu_khz(void)
+{
+#ifndef CONFIG_SMP
+	unsigned long cpu_khz_old = cpu_khz;
+
+	if (cpu_has_tsc) {
+		cpu_khz = calculate_cpu_khz();
+		tsc_khz = cpu_khz;
+		cpu_data[0].loops_per_jiffy =
+			cpufreq_scale(cpu_data[0].loops_per_jiffy,
+					cpu_khz_old, cpu_khz);
+		return 0;
+	} else
+		return -ENODEV;
+#else
+	return -ENODEV;
+#endif
+}
+
+EXPORT_SYMBOL(recalibrate_cpu_khz);
+
+#ifdef CONFIG_CPU_FREQ
+
+/*
+ * if the CPU frequency is scaled, TSC-based delays will need a different
+ * loops_per_jiffy value to function properly.
+ */
+static unsigned int ref_freq = 0;
+static unsigned long loops_per_jiffy_ref = 0;
+static unsigned long cpu_khz_ref = 0;
+
+static int
+time_cpufreq_notifier(struct notifier_block *nb, unsigned long val, void *data)
+{
+	struct cpufreq_freqs *freq = data;
+
+	if (!ref_freq) {
+		if (!freq->old){
+			ref_freq = freq->new;
+			return 0;
+		}
+		ref_freq = freq->old;
+		loops_per_jiffy_ref = cpu_data[freq->cpu].loops_per_jiffy;
+		cpu_khz_ref = cpu_khz;
+	}
+
+	if ((val == CPUFREQ_PRECHANGE  && freq->old < freq->new) ||
+	    (val == CPUFREQ_POSTCHANGE && freq->old > freq->new) ||
+	    (val == CPUFREQ_RESUMECHANGE)) {
+		if (!(freq->flags & CPUFREQ_CONST_LOOPS))
+			cpu_data[freq->cpu].loops_per_jiffy =
+				cpufreq_scale(loops_per_jiffy_ref,
+						ref_freq, freq->new);
+
+		if (cpu_khz) {
+
+			if (num_online_cpus() == 1)
+				cpu_khz = cpufreq_scale(cpu_khz_ref,
+						ref_freq, freq->new);
+			if (!(freq->flags & CPUFREQ_CONST_LOOPS)) {
+				tsc_khz = cpu_khz;
+				set_cyc2ns_scale(cpu_khz);
+				/*
+				 * TSC based sched_clock turns
+				 * to junk w/ cpufreq
+				 */
+				mark_tsc_unstable("cpufreq changes");
+			}
+		}
+	}
+
+	return 0;
+}
+
+static struct notifier_block time_cpufreq_notifier_block = {
+	.notifier_call	= time_cpufreq_notifier
+};
+
+static int __init cpufreq_tsc(void)
+{
+	return cpufreq_register_notifier(&time_cpufreq_notifier_block,
+					 CPUFREQ_TRANSITION_NOTIFIER);
+}
+core_initcall(cpufreq_tsc);
+
+#endif
+
+/* clock source code */
+
+static unsigned long current_tsc_khz = 0;
+
+static cycle_t read_tsc(void)
+{
+	cycle_t ret;
+
+	rdtscll(ret);
+
+	return ret;
+}
+
+static struct clocksource clocksource_tsc = {
+	.name			= "tsc",
+	.rating			= 300,
+	.read			= read_tsc,
+	.mask			= CLOCKSOURCE_MASK(64),
+	.mult			= 0, /* to be set */
+	.shift			= 22,
+	.flags			= CLOCK_SOURCE_IS_CONTINUOUS |
+				  CLOCK_SOURCE_MUST_VERIFY,
+};
+
+void mark_tsc_unstable(char *reason)
+{
+	if (!tsc_unstable) {
+		tsc_unstable = 1;
+		tsc_enabled = 0;
+		printk("Marking TSC unstable due to: %s.\n", reason);
+		/* Can be called before registration */
+		if (clocksource_tsc.mult)
+			clocksource_change_rating(&clocksource_tsc, 0);
+		else
+			clocksource_tsc.rating = 0;
+	}
+}
+EXPORT_SYMBOL_GPL(mark_tsc_unstable);
+
+static int __init dmi_mark_tsc_unstable(struct dmi_system_id *d)
+{
+	printk(KERN_NOTICE "%s detected: marking TSC unstable.\n",
+		       d->ident);
+	tsc_unstable = 1;
+	return 0;
+}
+
+/* List of systems that have known TSC problems */
+static struct dmi_system_id __initdata bad_tsc_dmi_table[] = {
+	{
+	 .callback = dmi_mark_tsc_unstable,
+	 .ident = "IBM Thinkpad 380XD",
+	 .matches = {
+		     DMI_MATCH(DMI_BOARD_VENDOR, "IBM"),
+		     DMI_MATCH(DMI_BOARD_NAME, "2635FA0"),
+		     },
+	 },
+	 {}
+};
+
+/*
+ * Make an educated guess if the TSC is trustworthy and synchronized
+ * over all CPUs.
+ */
+__cpuinit int unsynchronized_tsc(void)
+{
+	if (!cpu_has_tsc || tsc_unstable)
+		return 1;
+	/*
+	 * Intel systems are normally all synchronized.
+	 * Exceptions must mark TSC as unstable:
+	 */
+	if (boot_cpu_data.x86_vendor != X86_VENDOR_INTEL) {
+		/* assume multi socket systems are not synchronized: */
+		if (num_possible_cpus() > 1)
+			tsc_unstable = 1;
+	}
+	return tsc_unstable;
+}
+
+/*
+ * Geode_LX - the OLPC CPU has a possibly a very reliable TSC
+ */
+#ifdef CONFIG_MGEODE_LX
+/* RTSC counts during suspend */
+#define RTSC_SUSP 0x100
+
+static void __init check_geode_tsc_reliable(void)
+{
+	unsigned long val;
+
+	rdmsrl(MSR_GEODE_BUSCONT_CONF0, val);
+	if ((val & RTSC_SUSP))
+		clocksource_tsc.flags &= ~CLOCK_SOURCE_MUST_VERIFY;
+}
+#else
+static inline void check_geode_tsc_reliable(void) { }
+#endif
+
+
+void __init tsc_init(void)
+{
+	if (!cpu_has_tsc || tsc_disable)
+		goto out_no_tsc;
+
+	cpu_khz = calculate_cpu_khz();
+	tsc_khz = cpu_khz;
+
+	if (!cpu_khz)
+		goto out_no_tsc;
+
+	printk("Detected %lu.%03lu MHz processor.\n",
+				(unsigned long)cpu_khz / 1000,
+				(unsigned long)cpu_khz % 1000);
+
+	set_cyc2ns_scale(cpu_khz);
+	use_tsc_delay();
+
+	/* Check and install the TSC clocksource */
+	dmi_check_system(bad_tsc_dmi_table);
+
+	unsynchronized_tsc();
+	check_geode_tsc_reliable();
+	current_tsc_khz = tsc_khz;
+	clocksource_tsc.mult = clocksource_khz2mult(current_tsc_khz,
+							clocksource_tsc.shift);
+	/* lower the rating if we already know its unstable: */
+	if (check_tsc_unstable()) {
+		clocksource_tsc.rating = 0;
+		clocksource_tsc.flags &= ~CLOCK_SOURCE_IS_CONTINUOUS;
+	} else
+		tsc_enabled = 1;
+
+	clocksource_register(&clocksource_tsc);
+
+	return;
+
+out_no_tsc:
+	/*
+	 * Set the tsc_disable flag if there's no TSC support, this
+	 * makes it a fast flag for the kernel to see whether it
+	 * should be using the TSC.
+	 */
+	tsc_disable = 1;
+}