x86: Move olpc to platform

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andres Salomon <dilinger@queued.net>

4 files changed, 0 insertions, 537 deletions

diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index 08e2e4bf839..9e13763b609 100644
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -101,10 +101,6 @@ obj-$(CONFIG_PARAVIRT_CLOCK)	+= pvclock.o
 
 obj-$(CONFIG_PCSPKR_PLATFORM)	+= pcspeaker.o
 
-obj-$(CONFIG_OLPC)		+= olpc.o
-obj-$(CONFIG_OLPC_XO1)		+= olpc-xo1.o
-obj-$(CONFIG_OLPC_OPENFIRMWARE)	+= olpc_ofw.o
-
 microcode-y				:= microcode_core.o
 microcode-$(CONFIG_MICROCODE_INTEL)	+= microcode_intel.o
 microcode-$(CONFIG_MICROCODE_AMD)	+= microcode_amd.o
diff --git a/arch/x86/kernel/olpc-xo1.c b/arch/x86/kernel/olpc-xo1.c
deleted file mode 100644
index f5442c03abc..00000000000
--- a/arch/x86/kernel/olpc-xo1.c
+++ /dev/null
@@ -1,140 +0,0 @@
-/*
- * Support for features of the OLPC XO-1 laptop
- *
- * Copyright (C) 2010 One Laptop per Child
- * Copyright (C) 2006 Red Hat, Inc.
- * Copyright (C) 2006 Advanced Micro Devices, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/module.h>
-#include <linux/pci.h>
-#include <linux/pci_ids.h>
-#include <linux/platform_device.h>
-#include <linux/pm.h>
-
-#include <asm/io.h>
-#include <asm/olpc.h>
-
-#define DRV_NAME "olpc-xo1"
-
-#define PMS_BAR		4
-#define ACPI_BAR	5
-
-/* PMC registers (PMS block) */
-#define PM_SCLK		0x10
-#define PM_IN_SLPCTL	0x20
-#define PM_WKXD		0x34
-#define PM_WKD		0x30
-#define PM_SSC		0x54
-
-/* PM registers (ACPI block) */
-#define PM1_CNT		0x08
-#define PM_GPE0_STS	0x18
-
-static unsigned long acpi_base;
-static unsigned long pms_base;
-
-static void xo1_power_off(void)
-{
-	printk(KERN_INFO "OLPC XO-1 power off sequence...\n");
-
-	/* Enable all of these controls with 0 delay */
-	outl(0x40000000, pms_base + PM_SCLK);
-	outl(0x40000000, pms_base + PM_IN_SLPCTL);
-	outl(0x40000000, pms_base + PM_WKXD);
-	outl(0x40000000, pms_base + PM_WKD);
-
-	/* Clear status bits (possibly unnecessary) */
-	outl(0x0002ffff, pms_base  + PM_SSC);
-	outl(0xffffffff, acpi_base + PM_GPE0_STS);
-
-	/* Write SLP_EN bit to start the machinery */
-	outl(0x00002000, acpi_base + PM1_CNT);
-}
-
-/* Read the base addresses from the PCI BAR info */
-static int __devinit setup_bases(struct pci_dev *pdev)
-{
-	int r;
-
-	r = pci_enable_device_io(pdev);
-	if (r) {
-		dev_err(&pdev->dev, "can't enable device IO\n");
-		return r;
-	}
-
-	r = pci_request_region(pdev, ACPI_BAR, DRV_NAME);
-	if (r) {
-		dev_err(&pdev->dev, "can't alloc PCI BAR #%d\n", ACPI_BAR);
-		return r;
-	}
-
-	r = pci_request_region(pdev, PMS_BAR, DRV_NAME);
-	if (r) {
-		dev_err(&pdev->dev, "can't alloc PCI BAR #%d\n", PMS_BAR);
-		pci_release_region(pdev, ACPI_BAR);
-		return r;
-	}
-
-	acpi_base = pci_resource_start(pdev, ACPI_BAR);
-	pms_base = pci_resource_start(pdev, PMS_BAR);
-
-	return 0;
-}
-
-static int __devinit olpc_xo1_probe(struct platform_device *pdev)
-{
-	struct pci_dev *pcidev;
-	int r;
-
-	pcidev = pci_get_device(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA,
-				NULL);
-	if (!pdev)
-		return -ENODEV;
-
-	r = setup_bases(pcidev);
-	if (r)
-		return r;
-
-	pm_power_off = xo1_power_off;
-
-	printk(KERN_INFO "OLPC XO-1 support registered\n");
-	return 0;
-}
-
-static int __devexit olpc_xo1_remove(struct platform_device *pdev)
-{
-	pm_power_off = NULL;
-	return 0;
-}
-
-static struct platform_driver olpc_xo1_driver = {
-	.driver = {
-		.name = DRV_NAME,
-		.owner = THIS_MODULE,
-	},
-	.probe = olpc_xo1_probe,
-	.remove = __devexit_p(olpc_xo1_remove),
-};
-
-static int __init olpc_xo1_init(void)
-{
-	return platform_driver_register(&olpc_xo1_driver);
-}
-
-static void __exit olpc_xo1_exit(void)
-{
-	platform_driver_unregister(&olpc_xo1_driver);
-}
-
-MODULE_AUTHOR("Daniel Drake <dsd@laptop.org>");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:olpc-xo1");
-
-module_init(olpc_xo1_init);
-module_exit(olpc_xo1_exit);
diff --git a/arch/x86/kernel/olpc.c b/arch/x86/kernel/olpc.c
deleted file mode 100644
index edaf3fe8dc5..00000000000
--- a/arch/x86/kernel/olpc.c
+++ /dev/null
@@ -1,281 +0,0 @@
-/*
- * Support for the OLPC DCON and OLPC EC access
- *
- * Copyright © 2006  Advanced Micro Devices, Inc.
- * Copyright © 2007-2008  Andres Salomon <dilinger@debian.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/spinlock.h>
-#include <linux/io.h>
-#include <linux/string.h>
-#include <linux/platform_device.h>
-
-#include <asm/geode.h>
-#include <asm/setup.h>
-#include <asm/olpc.h>
-#include <asm/olpc_ofw.h>
-
-struct olpc_platform_t olpc_platform_info;
-EXPORT_SYMBOL_GPL(olpc_platform_info);
-
-static DEFINE_SPINLOCK(ec_lock);
-
-/* what the timeout *should* be (in ms) */
-#define EC_BASE_TIMEOUT 20
-
-/* the timeout that bugs in the EC might force us to actually use */
-static int ec_timeout = EC_BASE_TIMEOUT;
-
-static int __init olpc_ec_timeout_set(char *str)
-{
-	if (get_option(&str, &ec_timeout) != 1) {
-		ec_timeout = EC_BASE_TIMEOUT;
-		printk(KERN_ERR "olpc-ec:  invalid argument to "
-				"'olpc_ec_timeout=', ignoring!\n");
-	}
-	printk(KERN_DEBUG "olpc-ec:  using %d ms delay for EC commands.\n",
-			ec_timeout);
-	return 1;
-}
-__setup("olpc_ec_timeout=", olpc_ec_timeout_set);
-
-/*
- * These {i,o}bf_status functions return whether the buffers are full or not.
- */
-
-static inline unsigned int ibf_status(unsigned int port)
-{
-	return !!(inb(port) & 0x02);
-}
-
-static inline unsigned int obf_status(unsigned int port)
-{
-	return inb(port) & 0x01;
-}
-
-#define wait_on_ibf(p, d) __wait_on_ibf(__LINE__, (p), (d))
-static int __wait_on_ibf(unsigned int line, unsigned int port, int desired)
-{
-	unsigned int timeo;
-	int state = ibf_status(port);
-
-	for (timeo = ec_timeout; state != desired && timeo; timeo--) {
-		mdelay(1);
-		state = ibf_status(port);
-	}
-
-	if ((state == desired) && (ec_timeout > EC_BASE_TIMEOUT) &&
-			timeo < (ec_timeout - EC_BASE_TIMEOUT)) {
-		printk(KERN_WARNING "olpc-ec:  %d: waited %u ms for IBF!\n",
-				line, ec_timeout - timeo);
-	}
-
-	return !(state == desired);
-}
-
-#define wait_on_obf(p, d) __wait_on_obf(__LINE__, (p), (d))
-static int __wait_on_obf(unsigned int line, unsigned int port, int desired)
-{
-	unsigned int timeo;
-	int state = obf_status(port);
-
-	for (timeo = ec_timeout; state != desired && timeo; timeo--) {
-		mdelay(1);
-		state = obf_status(port);
-	}
-
-	if ((state == desired) && (ec_timeout > EC_BASE_TIMEOUT) &&
-			timeo < (ec_timeout - EC_BASE_TIMEOUT)) {
-		printk(KERN_WARNING "olpc-ec:  %d: waited %u ms for OBF!\n",
-				line, ec_timeout - timeo);
-	}
-
-	return !(state == desired);
-}
-
-/*
- * This allows the kernel to run Embedded Controller commands.  The EC is
- * documented at <http://wiki.laptop.org/go/Embedded_controller>, and the
- * available EC commands are here:
- * <http://wiki.laptop.org/go/Ec_specification>.  Unfortunately, while
- * OpenFirmware's source is available, the EC's is not.
- */
-int olpc_ec_cmd(unsigned char cmd, unsigned char *inbuf, size_t inlen,
-		unsigned char *outbuf,  size_t outlen)
-{
-	unsigned long flags;
-	int ret = -EIO;
-	int i;
-	int restarts = 0;
-
-	spin_lock_irqsave(&ec_lock, flags);
-
-	/* Clear OBF */
-	for (i = 0; i < 10 && (obf_status(0x6c) == 1); i++)
-		inb(0x68);
-	if (i == 10) {
-		printk(KERN_ERR "olpc-ec:  timeout while attempting to "
-				"clear OBF flag!\n");
-		goto err;
-	}
-
-	if (wait_on_ibf(0x6c, 0)) {
-		printk(KERN_ERR "olpc-ec:  timeout waiting for EC to "
-				"quiesce!\n");
-		goto err;
-	}
-
-restart:
-	/*
-	 * Note that if we time out during any IBF checks, that's a failure;
-	 * we have to return.  There's no way for the kernel to clear that.
-	 *
-	 * If we time out during an OBF check, we can restart the command;
-	 * reissuing it will clear the OBF flag, and we should be alright.
-	 * The OBF flag will sometimes misbehave due to what we believe
-	 * is a hardware quirk..
-	 */
-	pr_devel("olpc-ec:  running cmd 0x%x\n", cmd);
-	outb(cmd, 0x6c);
-
-	if (wait_on_ibf(0x6c, 0)) {
-		printk(KERN_ERR "olpc-ec:  timeout waiting for EC to read "
-				"command!\n");
-		goto err;
-	}
-
-	if (inbuf && inlen) {
-		/* write data to EC */
-		for (i = 0; i < inlen; i++) {
-			if (wait_on_ibf(0x6c, 0)) {
-				printk(KERN_ERR "olpc-ec:  timeout waiting for"
-						" EC accept data!\n");
-				goto err;
-			}
-			pr_devel("olpc-ec:  sending cmd arg 0x%x\n", inbuf[i]);
-			outb(inbuf[i], 0x68);
-		}
-	}
-	if (outbuf && outlen) {
-		/* read data from EC */
-		for (i = 0; i < outlen; i++) {
-			if (wait_on_obf(0x6c, 1)) {
-				printk(KERN_ERR "olpc-ec:  timeout waiting for"
-						" EC to provide data!\n");
-				if (restarts++ < 10)
-					goto restart;
-				goto err;
-			}
-			outbuf[i] = inb(0x68);
-			pr_devel("olpc-ec:  received 0x%x\n", outbuf[i]);
-		}
-	}
-
-	ret = 0;
-err:
-	spin_unlock_irqrestore(&ec_lock, flags);
-	return ret;
-}
-EXPORT_SYMBOL_GPL(olpc_ec_cmd);
-
-static bool __init check_ofw_architecture(void)
-{
-	size_t propsize;
-	char olpc_arch[5];
-	const void *args[] = { NULL, "architecture", olpc_arch, (void *)5 };
-	void *res[] = { &propsize };
-
-	if (olpc_ofw("getprop", args, res)) {
-		printk(KERN_ERR "ofw: getprop call failed!\n");
-		return false;
-	}
-	return propsize == 5 && strncmp("OLPC", olpc_arch, 5) == 0;
-}
-
-static u32 __init get_board_revision(void)
-{
-	size_t propsize;
-	__be32 rev;
-	const void *args[] = { NULL, "board-revision-int", &rev, (void *)4 };
-	void *res[] = { &propsize };
-
-	if (olpc_ofw("getprop", args, res) || propsize != 4) {
-		printk(KERN_ERR "ofw: getprop call failed!\n");
-		return cpu_to_be32(0);
-	}
-	return be32_to_cpu(rev);
-}
-
-static bool __init platform_detect(void)
-{
-	if (!check_ofw_architecture())
-		return false;
-	olpc_platform_info.flags |= OLPC_F_PRESENT;
-	olpc_platform_info.boardrev = get_board_revision();
-	return true;
-}
-
-static int __init add_xo1_platform_devices(void)
-{
-	struct platform_device *pdev;
-
-	pdev = platform_device_register_simple("xo1-rfkill", -1, NULL, 0);
-	if (IS_ERR(pdev))
-		return PTR_ERR(pdev);
-
-	pdev = platform_device_register_simple("olpc-xo1", -1, NULL, 0);
-	if (IS_ERR(pdev))
-		return PTR_ERR(pdev);
-
-	return 0;
-}
-
-static int __init olpc_init(void)
-{
-	int r = 0;
-
-	if (!olpc_ofw_present() || !platform_detect())
-		return 0;
-
-	spin_lock_init(&ec_lock);
-
-	/* assume B1 and above models always have a DCON */
-	if (olpc_board_at_least(olpc_board(0xb1)))
-		olpc_platform_info.flags |= OLPC_F_DCON;
-
-	/* get the EC revision */
-	olpc_ec_cmd(EC_FIRMWARE_REV, NULL, 0,
-			(unsigned char *) &olpc_platform_info.ecver, 1);
-
-#ifdef CONFIG_PCI_OLPC
-	/* If the VSA exists let it emulate PCI, if not emulate in kernel.
-	 * XO-1 only. */
-	if (olpc_platform_info.boardrev < olpc_board_pre(0xd0) &&
-			!cs5535_has_vsa2())
-		x86_init.pci.arch_init = pci_olpc_init;
-#endif
-
-	printk(KERN_INFO "OLPC board revision %s%X (EC=%x)\n",
-			((olpc_platform_info.boardrev & 0xf) < 8) ? "pre" : "",
-			olpc_platform_info.boardrev >> 4,
-			olpc_platform_info.ecver);
-
-	if (olpc_platform_info.boardrev < olpc_board_pre(0xd0)) { /* XO-1 */
-		r = add_xo1_platform_devices();
-		if (r)
-			return r;
-	}
-
-	return 0;
-}
-
-postcore_initcall(olpc_init);
diff --git a/arch/x86/kernel/olpc_ofw.c b/arch/x86/kernel/olpc_ofw.c
deleted file mode 100644
index 78732046437..00000000000
--- a/arch/x86/kernel/olpc_ofw.c
+++ /dev/null
@@ -1,112 +0,0 @@
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <asm/page.h>
-#include <asm/setup.h>
-#include <asm/io.h>
-#include <asm/pgtable.h>
-#include <asm/olpc_ofw.h>
-
-/* address of OFW callback interface; will be NULL if OFW isn't found */
-static int (*olpc_ofw_cif)(int *);
-
-/* page dir entry containing OFW's pgdir table; filled in by head_32.S */
-u32 olpc_ofw_pgd __initdata;
-
-static DEFINE_SPINLOCK(ofw_lock);
-
-#define MAXARGS 10
-
-void __init setup_olpc_ofw_pgd(void)
-{
-	pgd_t *base, *ofw_pde;
-
-	if (!olpc_ofw_cif)
-		return;
-
-	/* fetch OFW's PDE */
-	base = early_ioremap(olpc_ofw_pgd, sizeof(olpc_ofw_pgd) * PTRS_PER_PGD);
-	if (!base) {
-		printk(KERN_ERR "failed to remap OFW's pgd - disabling OFW!\n");
-		olpc_ofw_cif = NULL;
-		return;
-	}
-	ofw_pde = &base[OLPC_OFW_PDE_NR];
-
-	/* install OFW's PDE permanently into the kernel's pgtable */
-	set_pgd(&swapper_pg_dir[OLPC_OFW_PDE_NR], *ofw_pde);
-	/* implicit optimization barrier here due to uninline function return */
-
-	early_iounmap(base, sizeof(olpc_ofw_pgd) * PTRS_PER_PGD);
-}
-
-int __olpc_ofw(const char *name, int nr_args, const void **args, int nr_res,
-		void **res)
-{
-	int ofw_args[MAXARGS + 3];
-	unsigned long flags;
-	int ret, i, *p;
-
-	BUG_ON(nr_args + nr_res > MAXARGS);
-
-	if (!olpc_ofw_cif)
-		return -EIO;
-
-	ofw_args[0] = (int)name;
-	ofw_args[1] = nr_args;
-	ofw_args[2] = nr_res;
-
-	p = &ofw_args[3];
-	for (i = 0; i < nr_args; i++, p++)
-		*p = (int)args[i];
-
-	/* call into ofw */
-	spin_lock_irqsave(&ofw_lock, flags);
-	ret = olpc_ofw_cif(ofw_args);
-	spin_unlock_irqrestore(&ofw_lock, flags);
-
-	if (!ret) {
-		for (i = 0; i < nr_res; i++, p++)
-			*((int *)res[i]) = *p;
-	}
-
-	return ret;
-}
-EXPORT_SYMBOL_GPL(__olpc_ofw);
-
-bool olpc_ofw_present(void)
-{
-	return olpc_ofw_cif != NULL;
-}
-EXPORT_SYMBOL_GPL(olpc_ofw_present);
-
-/* OFW cif _should_ be above this address */
-#define OFW_MIN 0xff000000
-
-/* OFW starts on a 1MB boundary */
-#define OFW_BOUND (1<<20)
-
-void __init olpc_ofw_detect(void)
-{
-	struct olpc_ofw_header *hdr = &boot_params.olpc_ofw_header;
-	unsigned long start;
-
-	/* ensure OFW booted us by checking for "OFW " string */
-	if (hdr->ofw_magic != OLPC_OFW_SIG)
-		return;
-
-	olpc_ofw_cif = (int (*)(int *))hdr->cif_handler;
-
-	if ((unsigned long)olpc_ofw_cif < OFW_MIN) {
-		printk(KERN_ERR "OFW detected, but cif has invalid address 0x%lx - disabling.\n",
-				(unsigned long)olpc_ofw_cif);
-		olpc_ofw_cif = NULL;
-		return;
-	}
-
-	/* determine where OFW starts in memory */
-	start = round_down((unsigned long)olpc_ofw_cif, OFW_BOUND);
-	printk(KERN_INFO "OFW detected in memory, cif @ 0x%lx (reserving top %ldMB)\n",
-			(unsigned long)olpc_ofw_cif, (-start) >> 20);
-	reserve_top_address(-start);
-}