x86: merge mpparse_{32,64}.c

Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

3 files changed, 11 insertions, 1002 deletions

diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index 0bf2fb55aa7..fdd8395e0ed 100644
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -51,7 +51,7 @@ obj-$(CONFIG_X86_SMP)		+= smpboot.o tsc_sync.o ipi.o tlb_$(BITS).o
 obj-$(CONFIG_X86_32_SMP)	+= smpcommon.o
 obj-$(CONFIG_X86_64_SMP)	+= tsc_sync.o smpcommon.o
 obj-$(CONFIG_X86_TRAMPOLINE)	+= trampoline_$(BITS).o
-obj-$(CONFIG_X86_MPPARSE)	+= mpparse_$(BITS).o
+obj-$(CONFIG_X86_MPPARSE)	+= mpparse.o
 obj-$(CONFIG_X86_LOCAL_APIC)	+= apic_$(BITS).o nmi_$(BITS).o
 obj-$(CONFIG_X86_IO_APIC)	+= io_apic_$(BITS).o
 obj-$(CONFIG_X86_REBOOTFIXUPS)	+= reboot_fixups_32.o
diff --git a/arch/x86/kernel/mpparse_32.c b/arch/x86/kernel/mpparse.c
index 6376791cffe..6e5e4547981 100644
--- a/arch/x86/kernel/mpparse_32.c
+++ b/arch/x86/kernel/mpparse.c
@@ -4,34 +4,33 @@
  *
  *	(c) 1995 Alan Cox, Building #3 <alan@redhat.com>
  *	(c) 1998, 1999, 2000 Ingo Molnar <mingo@redhat.com>
- *
- *	Fixes
- *		Erich Boleyn	:	MP v1.4 and additional changes.
- *		Alan Cox	:	Added EBDA scanning
- *		Ingo Molnar	:	various cleanups and rewrites
- *		Maciej W. Rozycki:	Bits for default MP configurations
- *		Paul Diefenbaugh:	Added full ACPI support
+ *      (c) 2008 Alexey Starikovskiy <astarikovskiy@suse.de>
  */
 
 #include <linux/mm.h>
 #include <linux/init.h>
-#include <linux/acpi.h>
 #include <linux/delay.h>
 #include <linux/bootmem.h>
 #include <linux/kernel_stat.h>
 #include <linux/mc146818rtc.h>
 #include <linux/bitops.h>
+#include <linux/acpi.h>
+#include <linux/module.h>
 
 #include <asm/smp.h>
-#include <asm/acpi.h>
 #include <asm/mtrr.h>
 #include <asm/mpspec.h>
+#include <asm/pgalloc.h>
 #include <asm/io_apic.h>
+#include <asm/proto.h>
+#include <asm/acpi.h>
 #include <asm/bios_ebda.h>
 
 #include <mach_apic.h>
+#ifdef CONFIG_X86_32
 #include <mach_apicdef.h>
 #include <mach_mpparse.h>
+#endif
 
 /* Have we found an MP table */
 int smp_found_config;
@@ -43,8 +42,10 @@ int smp_found_config;
 #if defined (CONFIG_MCA) || defined (CONFIG_EISA)
 int mp_bus_id_to_type[MAX_MP_BUSSES];
 #endif
+
 DECLARE_BITMAP(mp_bus_not_pci, MAX_MP_BUSSES);
 int mp_bus_id_to_pci_bus[MAX_MP_BUSSES] = {[0 ... MAX_MP_BUSSES - 1] = -1 };
+
 static int mp_current_pci_id;
 
 int pic_mode;
@@ -582,7 +583,6 @@ static void __init __get_smp_config(unsigned early)
 
 	if (acpi_lapic && early)
 		return;
-
 	/*
 	 * ACPI supports both logical (e.g. Hyper-Threading) and physical
 	 * processors, where MPS only supports physical.
diff --git a/arch/x86/kernel/mpparse_64.c b/arch/x86/kernel/mpparse_64.c
deleted file mode 100644
index 7d742577d68..00000000000
--- a/arch/x86/kernel/mpparse_64.c
+++ /dev/null
@@ -1,991 +0,0 @@
-/*
- *	Intel Multiprocessor Specification 1.1 and 1.4
- *	compliant MP-table parsing routines.
- *
- *	(c) 1995 Alan Cox, Building #3 <alan@redhat.com>
- *	(c) 1998, 1999, 2000 Ingo Molnar <mingo@redhat.com>
- *
- *	Fixes
- *		Erich Boleyn	:	MP v1.4 and additional changes.
- *		Alan Cox	:	Added EBDA scanning
- *		Ingo Molnar	:	various cleanups and rewrites
- *		Maciej W. Rozycki:	Bits for default MP configurations
- *		Paul Diefenbaugh:	Added full ACPI support
- */
-
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/bootmem.h>
-#include <linux/kernel_stat.h>
-#include <linux/mc146818rtc.h>
-#include <linux/acpi.h>
-#include <linux/module.h>
-
-#include <asm/smp.h>
-#include <asm/mtrr.h>
-#include <asm/mpspec.h>
-#include <asm/pgalloc.h>
-#include <asm/io_apic.h>
-#include <asm/proto.h>
-#include <asm/acpi.h>
-#include <asm/bios_ebda.h>
-
-#include <mach_apic.h>
-
-/* Have we found an MP table */
-int smp_found_config;
-
-/*
- * Various Linux-internal data structures created from the
- * MP-table.
- */
-DECLARE_BITMAP(mp_bus_not_pci, MAX_MP_BUSSES);
-int mp_bus_id_to_pci_bus[MAX_MP_BUSSES] = {[0 ... MAX_MP_BUSSES - 1] = -1 };
-
-static int mp_current_pci_id = 0;
-
-/*
- * Intel MP BIOS table parsing routines:
- */
-
-/*
- * Checksum an MP configuration block.
- */
-
-static int __init mpf_checksum(unsigned char *mp, int len)
-{
-	int sum = 0;
-
-	while (len--)
-		sum += *mp++;
-
-	return sum & 0xFF;
-}
-
-static void __cpuinit MP_processor_info(struct mpc_config_processor *m)
-{
-	int apicid;
-	char *bootup_cpu = "";
-
-	if (!(m->mpc_cpuflag & CPU_ENABLED)) {
-		disabled_cpus++;
-		return;
-	}
-#ifdef CONFIG_X86_NUMAQ
-	apicid = mpc_apic_id(m, translation_table[mpc_record]);
-#else
-	apicid = m->mpc_apicid;
-#endif
-	if (m->mpc_cpuflag & CPU_BOOTPROCESSOR) {
-		bootup_cpu = " (Bootup-CPU)";
-		boot_cpu_physical_apicid = m->mpc_apicid;
-	}
-
-	printk(KERN_INFO "Processor #%d%s\n", m->mpc_apicid, bootup_cpu);
-	generic_processor_info(apicid, m->mpc_apicver);
-}
-
-static void __init MP_bus_info(struct mpc_config_bus *m)
-{
-	char str[7];
-
-	memcpy(str, m->mpc_bustype, 6);
-	str[6] = 0;
-
-#ifdef CONFIG_X86_NUMAQ
-	mpc_oem_bus_info(m, str, translation_table[mpc_record]);
-#else
-	Dprintk("Bus #%d is %s\n", m->mpc_busid, str);
-#endif
-
-#if MAX_MP_BUSSES < 256
-	if (m->mpc_busid >= MAX_MP_BUSSES) {
-		printk(KERN_WARNING "MP table busid value (%d) for bustype %s "
-		       " is too large, max. supported is %d\n",
-		       m->mpc_busid, str, MAX_MP_BUSSES - 1);
-		return;
-	}
-#endif
-
-	if (strncmp(str, BUSTYPE_ISA, sizeof(BUSTYPE_ISA) - 1) == 0) {
-		 set_bit(m->mpc_busid, mp_bus_not_pci);
-#if defined(CONFIG_EISA) || defined (CONFIG_MCA)
-		mp_bus_id_to_type[m->mpc_busid] = MP_BUS_ISA;
-#endif
-	} else if (strncmp(str, BUSTYPE_PCI, sizeof(BUSTYPE_PCI) - 1) == 0) {
-#ifdef CONFIG_X86_NUMAQ
-		mpc_oem_pci_bus(m, translation_table[mpc_record]);
-#endif
-		clear_bit(m->mpc_busid, mp_bus_not_pci);
-		mp_bus_id_to_pci_bus[m->mpc_busid] = mp_current_pci_id;
-		mp_current_pci_id++;
-#if defined(CONFIG_EISA) || defined (CONFIG_MCA)
-		mp_bus_id_to_type[m->mpc_busid] = MP_BUS_PCI;
-	} else if (strncmp(str, BUSTYPE_EISA, sizeof(BUSTYPE_EISA) - 1) == 0) {
-		mp_bus_id_to_type[m->mpc_busid] = MP_BUS_EISA;
-	} else if (strncmp(str, BUSTYPE_MCA, sizeof(BUSTYPE_MCA) - 1) == 0) {
-		mp_bus_id_to_type[m->mpc_busid] = MP_BUS_MCA;
-#endif
-	} else
-		printk(KERN_WARNING "Unknown bustype %s - ignoring\n", str);
-}
-
-static int bad_ioapic(unsigned long address)
-{
-	if (nr_ioapics >= MAX_IO_APICS) {
-		printk(KERN_ERR "ERROR: Max # of I/O APICs (%d) exceeded "
-		       "(found %d)\n", MAX_IO_APICS, nr_ioapics);
-		panic("Recompile kernel with bigger MAX_IO_APICS!\n");
-	}
-	if (!address) {
-		printk(KERN_ERR "WARNING: Bogus (zero) I/O APIC address"
-		       " found in table, skipping!\n");
-		return 1;
-	}
-	return 0;
-}
-
-static void __init MP_ioapic_info(struct mpc_config_ioapic *m)
-{
-	if (!(m->mpc_flags & MPC_APIC_USABLE))
-		return;
-
-	printk(KERN_INFO "I/O APIC #%d at 0x%X.\n", m->mpc_apicid,
-	       m->mpc_apicaddr);
-
-	if (bad_ioapic(m->mpc_apicaddr))
-		return;
-
-	mp_ioapics[nr_ioapics] = *m;
-	nr_ioapics++;
-}
-
-static void __init MP_intsrc_info(struct mpc_config_intsrc *m)
-{
-	mp_irqs[mp_irq_entries] = *m;
-	Dprintk("Int: type %d, pol %d, trig %d, bus %d,"
-		" IRQ %02x, APIC ID %x, APIC INT %02x\n",
-		m->mpc_irqtype, m->mpc_irqflag & 3,
-		(m->mpc_irqflag >> 2) & 3, m->mpc_srcbus,
-		m->mpc_srcbusirq, m->mpc_dstapic, m->mpc_dstirq);
-	if (++mp_irq_entries >= MAX_IRQ_SOURCES)
-		panic("Max # of irq sources exceeded!!\n");
-}
-
-static void __init MP_lintsrc_info(struct mpc_config_lintsrc *m)
-{
-	Dprintk("Lint: type %d, pol %d, trig %d, bus %d,"
-		" IRQ %02x, APIC ID %x, APIC LINT %02x\n",
-		m->mpc_irqtype, m->mpc_irqflag & 3,
-		(m->mpc_irqflag >> 2) & 3, m->mpc_srcbusid,
-		m->mpc_srcbusirq, m->mpc_destapic, m->mpc_destapiclint);
-}
-
-/*
- * Read/parse the MPC
- */
-static int __init smp_read_mpc(struct mp_config_table *mpc, unsigned early)
-{
-	char str[16];
-	char oem[10];
-	int count = sizeof(*mpc);
-	unsigned char *mpt = ((unsigned char *)mpc) + count;
-
-	if (memcmp(mpc->mpc_signature, MPC_SIGNATURE, 4)) {
-		printk(KERN_ERR "MPTABLE: bad signature [%c%c%c%c]!\n",
-		       mpc->mpc_signature[0], mpc->mpc_signature[1],
-		       mpc->mpc_signature[2], mpc->mpc_signature[3]);
-		return 0;
-	}
-	if (mpf_checksum((unsigned char *)mpc, mpc->mpc_length)) {
-		printk(KERN_ERR "MPTABLE: checksum error!\n");
-		return 0;
-	}
-	if (mpc->mpc_spec != 0x01 && mpc->mpc_spec != 0x04) {
-		printk(KERN_ERR "MPTABLE: bad table version (%d)!!\n",
-		       mpc->mpc_spec);
-		return 0;
-	}
-	if (!mpc->mpc_lapic) {
-		printk(KERN_ERR "MPTABLE: null local APIC address!\n");
-		return 0;
-	}
-	memcpy(oem, mpc->mpc_oem, 8);
-	oem[8] = 0;
-	printk(KERN_INFO "MPTABLE: OEM ID: %s ", oem);
-
-	memcpy(str, mpc->mpc_productid, 12);
-	str[12] = 0;
-	printk("Product ID: %s ", str);
-
-#ifdef CONFIG_X86_32
-	mps_oem_check(mpc, oem, str);
-#endif
-	printk(KERN_INFO "MPTABLE: Product ID: %s ", str);
-
-	printk(KERN_INFO "MPTABLE: APIC at: 0x%X\n", mpc->mpc_lapic);
-
-	/* save the local APIC address, it might be non-default */
-	if (!acpi_lapic)
-		mp_lapic_addr = mpc->mpc_lapic;
-
-	if (early)
-		return 1;
-
-	/*
-	 *      Now process the configuration blocks.
-	 */
-#ifdef CONFIG_X86_NUMAQ
-	mpc_record = 0;
-#endif
-	while (count < mpc->mpc_length) {
-		switch (*mpt) {
-		case MP_PROCESSOR:
-			{
-				struct mpc_config_processor *m =
-				    (struct mpc_config_processor *)mpt;
-				/* ACPI may have already provided this data */
-				if (!acpi_lapic)
-					MP_processor_info(m);
-				mpt += sizeof(*m);
-				count += sizeof(*m);
-				break;
-			}
-		case MP_BUS:
-			{
-				struct mpc_config_bus *m =
-				    (struct mpc_config_bus *)mpt;
-				MP_bus_info(m);
-				mpt += sizeof(*m);
-				count += sizeof(*m);
-				break;
-			}
-		case MP_IOAPIC:
-			{
-				struct mpc_config_ioapic *m =
-				    (struct mpc_config_ioapic *)mpt;
-				MP_ioapic_info(m);
-				mpt += sizeof(*m);
-				count += sizeof(*m);
-				break;
-			}
-		case MP_INTSRC:
-			{
-				struct mpc_config_intsrc *m =
-				    (struct mpc_config_intsrc *)mpt;
-
-				MP_intsrc_info(m);
-				mpt += sizeof(*m);
-				count += sizeof(*m);
-				break;
-			}
-		case MP_LINTSRC:
-			{
-				struct mpc_config_lintsrc *m =
-				    (struct mpc_config_lintsrc *)mpt;
-				MP_lintsrc_info(m);
-				mpt += sizeof(*m);
-				count += sizeof(*m);
-				break;
-			}
-		default:
-			{
-				count = mpc->mpc_length;
-				break;
-			}
-		}
-#ifdef CONFIG_X86_NUMAQ
-		++mpc_record;
-#endif
-	}
-	setup_apic_routing();
-	if (!num_processors)
-		printk(KERN_ERR "MPTABLE: no processors registered!\n");
-	return num_processors;
-}
-
-static int __init ELCR_trigger(unsigned int irq)
-{
-	unsigned int port;
-
-	port = 0x4d0 + (irq >> 3);
-	return (inb(port) >> (irq & 7)) & 1;
-}
-
-static void __init construct_default_ioirq_mptable(int mpc_default_type)
-{
-	struct mpc_config_intsrc intsrc;
-	int i;
-	int ELCR_fallback = 0;
-
-	intsrc.mpc_type = MP_INTSRC;
-	intsrc.mpc_irqflag = 0;	/* conforming */
-	intsrc.mpc_srcbus = 0;
-	intsrc.mpc_dstapic = mp_ioapics[0].mpc_apicid;
-
-	intsrc.mpc_irqtype = mp_INT;
-
-	/*
-	 *  If true, we have an ISA/PCI system with no IRQ entries
-	 *  in the MP table. To prevent the PCI interrupts from being set up
-	 *  incorrectly, we try to use the ELCR. The sanity check to see if
-	 *  there is good ELCR data is very simple - IRQ0, 1, 2 and 13 can
-	 *  never be level sensitive, so we simply see if the ELCR agrees.
-	 *  If it does, we assume it's valid.
-	 */
-	if (mpc_default_type == 5) {
-		printk(KERN_INFO "ISA/PCI bus type with no IRQ information... "
-		       "falling back to ELCR\n");
-
-		if (ELCR_trigger(0) || ELCR_trigger(1) || ELCR_trigger(2) ||
-		    ELCR_trigger(13))
-			printk(KERN_ERR "ELCR contains invalid data... "
-			       "not using ELCR\n");
-		else {
-			printk(KERN_INFO
-			       "Using ELCR to identify PCI interrupts\n");
-			ELCR_fallback = 1;
-		}
-	}
-
-	for (i = 0; i < 16; i++) {
-		switch (mpc_default_type) {
-		case 2:
-			if (i == 0 || i == 13)
-				continue;	/* IRQ0 & IRQ13 not connected */
-			/* fall through */
-		default:
-			if (i == 2)
-				continue;	/* IRQ2 is never connected */
-		}
-
-		if (ELCR_fallback) {
-			/*
-			 *  If the ELCR indicates a level-sensitive interrupt, we
-			 *  copy that information over to the MP table in the
-			 *  irqflag field (level sensitive, active high polarity).
-			 */
-			if (ELCR_trigger(i))
-				intsrc.mpc_irqflag = 13;
-			else
-				intsrc.mpc_irqflag = 0;
-		}
-
-		intsrc.mpc_srcbusirq = i;
-		intsrc.mpc_dstirq = i ? i : 2;	/* IRQ0 to INTIN2 */
-		MP_intsrc_info(&intsrc);
-	}
-
-	intsrc.mpc_irqtype = mp_ExtINT;
-	intsrc.mpc_srcbusirq = 0;
-	intsrc.mpc_dstirq = 0;	/* 8259A to INTIN0 */
-	MP_intsrc_info(&intsrc);
-}
-
-static inline void __init construct_default_ISA_mptable(int mpc_default_type)
-{
-	struct mpc_config_processor processor;
-	struct mpc_config_bus bus;
-	struct mpc_config_ioapic ioapic;
-	struct mpc_config_lintsrc lintsrc;
-	int linttypes[2] = { mp_ExtINT, mp_NMI };
-	int i;
-
-	/*
-	 * local APIC has default address
-	 */
-	mp_lapic_addr = APIC_DEFAULT_PHYS_BASE;
-
-	/*
-	 * 2 CPUs, numbered 0 & 1.
-	 */
-	processor.mpc_type = MP_PROCESSOR;
-	/* Either an integrated APIC or a discrete 82489DX. */
-	processor.mpc_apicver = mpc_default_type > 4 ? 0x10 : 0x01;
-	processor.mpc_cpuflag = CPU_ENABLED;
-	processor.mpc_cpufeature = (boot_cpu_data.x86 << 8) |
-	    (boot_cpu_data.x86_model << 4) | boot_cpu_data.x86_mask;
-	processor.mpc_featureflag = boot_cpu_data.x86_capability[0];
-	processor.mpc_reserved[0] = 0;
-	processor.mpc_reserved[1] = 0;
-	for (i = 0; i < 2; i++) {
-		processor.mpc_apicid = i;
-		MP_processor_info(&processor);
-	}
-
-	bus.mpc_type = MP_BUS;
-	bus.mpc_busid = 0;
-	switch (mpc_default_type) {
-	default:
-		printk(KERN_ERR "???\nUnknown standard configuration %d\n",
-		       mpc_default_type);
-		/* fall through */
-	case 1:
-	case 5:
-		memcpy(bus.mpc_bustype, "ISA   ", 6);
-		break;
-	case 2:
-	case 6:
-	case 3:
-		memcpy(bus.mpc_bustype, "EISA  ", 6);
-		break;
-	case 4:
-	case 7:
-		memcpy(bus.mpc_bustype, "MCA   ", 6);
-	}
-	MP_bus_info(&bus);
-	if (mpc_default_type > 4) {
-		bus.mpc_busid = 1;
-		memcpy(bus.mpc_bustype, "PCI   ", 6);
-		MP_bus_info(&bus);
-	}
-
-	ioapic.mpc_type = MP_IOAPIC;
-	ioapic.mpc_apicid = 2;
-	ioapic.mpc_apicver = mpc_default_type > 4 ? 0x10 : 0x01;
-	ioapic.mpc_flags = MPC_APIC_USABLE;
-	ioapic.mpc_apicaddr = 0xFEC00000;
-	MP_ioapic_info(&ioapic);
-
-	/*
-	 * We set up most of the low 16 IO-APIC pins according to MPS rules.
-	 */
-	construct_default_ioirq_mptable(mpc_default_type);
-
-	lintsrc.mpc_type = MP_LINTSRC;
-	lintsrc.mpc_irqflag = 0;	/* conforming */
-	lintsrc.mpc_srcbusid = 0;
-	lintsrc.mpc_srcbusirq = 0;
-	lintsrc.mpc_destapic = MP_APIC_ALL;
-	for (i = 0; i < 2; i++) {
-		lintsrc.mpc_irqtype = linttypes[i];
-		lintsrc.mpc_destapiclint = i;
-		MP_lintsrc_info(&lintsrc);
-	}
-}
-
-static struct intel_mp_floating *mpf_found;
-
-/*
- * Scan the memory blocks for an SMP configuration block.
- */
-static void __init __get_smp_config(unsigned early)
-{
-	struct intel_mp_floating *mpf = mpf_found;
-
-	if (acpi_lapic && early)
-		return;
-	/*
-	 * ACPI supports both logical (e.g. Hyper-Threading) and physical
-	 * processors, where MPS only supports physical.
-	 */
-	if (acpi_lapic && acpi_ioapic) {
-		printk(KERN_INFO "Using ACPI (MADT) for SMP configuration "
-		       "information\n");
-		return;
-	} else if (acpi_lapic)
-		printk(KERN_INFO "Using ACPI for processor (LAPIC) "
-		       "configuration information\n");
-
-	printk(KERN_INFO "Intel MultiProcessor Specification v1.%d\n",
-	       mpf->mpf_specification);
-#ifdef CONFIG_X86_32
-	if (mpf->mpf_feature2 & (1 << 7)) {
-		printk(KERN_INFO "    IMCR and PIC compatibility mode.\n");
-		pic_mode = 1;
-	} else {
-		printk(KERN_INFO "    Virtual Wire compatibility mode.\n");
-		pic_mode = 0;
-	}
-#endif
-	/*
-	 * Now see if we need to read further.
-	 */
-	if (mpf->mpf_feature1 != 0) {
-		if (early) {
-			/*
-			 * local APIC has default address
-			 */
-			mp_lapic_addr = APIC_DEFAULT_PHYS_BASE;
-			return;
-		}
-
-		printk(KERN_INFO "Default MP configuration #%d\n",
-		       mpf->mpf_feature1);
-		construct_default_ISA_mptable(mpf->mpf_feature1);
-
-	} else if (mpf->mpf_physptr) {
-
-		/*
-		 * Read the physical hardware table.  Anything here will
-		 * override the defaults.
-		 */
-		if (!smp_read_mpc(phys_to_virt(mpf->mpf_physptr), early)) {
-			smp_found_config = 0;
-			printk(KERN_ERR
-			       "BIOS bug, MP table errors detected!...\n");
-			printk(KERN_ERR "... disabling SMP support. "
-			       "(tell your hw vendor)\n");
-			return;
-		}
-
-		if (early)
-			return;
-		/*
-		 * If there are no explicit MP IRQ entries, then we are
-		 * broken.  We set up most of the low 16 IO-APIC pins to
-		 * ISA defaults and hope it will work.
-		 */
-		if (!mp_irq_entries) {
-			struct mpc_config_bus bus;
-
-			printk(KERN_ERR "BIOS bug, no explicit IRQ entries, "
-			       "using default mptable. "
-			       "(tell your hw vendor)\n");
-
-			bus.mpc_type = MP_BUS;
-			bus.mpc_busid = 0;
-			memcpy(bus.mpc_bustype, "ISA   ", 6);
-			MP_bus_info(&bus);
-
-			construct_default_ioirq_mptable(0);
-		}
-
-	} else
-		BUG();
-
-	if (!early)
-		printk(KERN_INFO "Processors: %d\n", num_processors);
-	/*
-	 * Only use the first configuration found.
-	 */
-}
-
-void __init early_get_smp_config(void)
-{
-	__get_smp_config(1);
-}
-
-void __init get_smp_config(void)
-{
-	__get_smp_config(0);
-}
-
-static int __init smp_scan_config(unsigned long base, unsigned long length,
-				  unsigned reserve)
-{
-	extern void __bad_mpf_size(void);
-	unsigned int *bp = phys_to_virt(base);
-	struct intel_mp_floating *mpf;
-
-	Dprintk("Scan SMP from %p for %ld bytes.\n", bp, length);
-	if (sizeof(*mpf) != 16)
-		__bad_mpf_size();
-
-	while (length > 0) {
-		mpf = (struct intel_mp_floating *)bp;
-		if ((*bp == SMP_MAGIC_IDENT) &&
-		    (mpf->mpf_length == 1) &&
-		    !mpf_checksum((unsigned char *)bp, 16) &&
-		    ((mpf->mpf_specification == 1)
-		     || (mpf->mpf_specification == 4))) {
-
-			smp_found_config = 1;
-			mpf_found = mpf;
-#ifdef CONFIG_X86_32
-			printk(KERN_INFO "found SMP MP-table at [%p] %08lx\n",
-			       mpf, virt_to_phys(mpf));
-			reserve_bootmem(virt_to_phys(mpf), PAGE_SIZE,
-					BOOTMEM_DEFAULT);
-			if (mpf->mpf_physptr) {
-				/*
-				 * We cannot access to MPC table to compute
-				 * table size yet, as only few megabytes from
-				 * the bottom is mapped now.
-				 * PC-9800's MPC table places on the very last
-				 * of physical memory; so that simply reserving
-				 * PAGE_SIZE from mpg->mpf_physptr yields BUG()
-				 * in reserve_bootmem.
-				 */
-				unsigned long size = PAGE_SIZE;
-				unsigned long end = max_low_pfn * PAGE_SIZE;
-				if (mpf->mpf_physptr + size > end)
-					size = end - mpf->mpf_physptr;
-				reserve_bootmem(mpf->mpf_physptr, size,
-						BOOTMEM_DEFAULT);
-			}
-
-#else
-			if (!reserve)
-				return 1;
-
-			reserve_bootmem_generic(virt_to_phys(mpf), PAGE_SIZE);
-			if (mpf->mpf_physptr)
-				reserve_bootmem_generic(mpf->mpf_physptr,
-							PAGE_SIZE);
-#endif
-		return 1;
-		}
-		bp += 4;
-		length -= 16;
-	}
-	return 0;
-}
-
-static void __init __find_smp_config(unsigned reserve)
-{
-	unsigned int address;
-
-	/*
-	 * FIXME: Linux assumes you have 640K of base ram..
-	 * this continues the error...
-	 *
-	 * 1) Scan the bottom 1K for a signature
-	 * 2) Scan the top 1K of base RAM
-	 * 3) Scan the 64K of bios
-	 */
-	if (smp_scan_config(0x0, 0x400, reserve) ||
-	    smp_scan_config(639 * 0x400, 0x400, reserve) ||
-	    smp_scan_config(0xF0000, 0x10000, reserve))
-		return;
-	/*
-	 * If it is an SMP machine we should know now.
-	 *
-	 * there is a real-mode segmented pointer pointing to the
-	 * 4K EBDA area at 0x40E, calculate and scan it here.
-	 *
-	 * NOTE! There are Linux loaders that will corrupt the EBDA
-	 * area, and as such this kind of SMP config may be less
-	 * trustworthy, simply because the SMP table may have been
-	 * stomped on during early boot. These loaders are buggy and
-	 * should be fixed.
-	 *
-	 * MP1.4 SPEC states to only scan first 1K of 4K EBDA.
-	 */
-
-	address = get_bios_ebda();
-	if (address)
-		smp_scan_config(address, 0x400, reserve);
-}
-
-void __init early_find_smp_config(void)
-{
-	__find_smp_config(0);
-}
-
-void __init find_smp_config(void)
-{
-	__find_smp_config(1);
-}
-
-/* --------------------------------------------------------------------------
-                            ACPI-based MP Configuration
-   -------------------------------------------------------------------------- */
-
-#ifdef CONFIG_ACPI
-
-#ifdef	CONFIG_X86_IO_APIC
-
-#define MP_ISA_BUS		0
-#define MP_MAX_IOAPIC_PIN	127
-
-extern struct mp_ioapic_routing mp_ioapic_routing[MAX_IO_APICS];
-
-static int mp_find_ioapic(int gsi)
-{
-	int i = 0;
-
-	/* Find the IOAPIC that manages this GSI. */
-	for (i = 0; i < nr_ioapics; i++) {
-		if ((gsi >= mp_ioapic_routing[i].gsi_base)
-		    && (gsi <= mp_ioapic_routing[i].gsi_end))
-			return i;
-	}
-
-	printk(KERN_ERR "ERROR: Unable to locate IOAPIC for GSI %d\n", gsi);
-	return -1;
-}
-
-static u8 uniq_ioapic_id(u8 id)
-{
-#ifdef CONFIG_X86_32
-	if ((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) &&
-	    !APIC_XAPIC(apic_version[boot_cpu_physical_apicid]))
-		return io_apic_get_unique_id(nr_ioapics, id);
-	else
-		return id;
-#else
-	int i;
-	DECLARE_BITMAP(used, 256);
-	bitmap_zero(used, 256);
-	for (i = 0; i < nr_ioapics; i++) {
-		struct mpc_config_ioapic *ia = &mp_ioapics[i];
-		__set_bit(ia->mpc_apicid, used);
-	}
-	if (!test_bit(id, used))
-		return id;
-	return find_first_zero_bit(used, 256);
-#endif
-}
-
-void __init mp_register_ioapic(int id, u32 address, u32 gsi_base)
-{
-	int idx = 0;
-
-	if (bad_ioapic(address))
-		return;
-
-	idx = nr_ioapics;
-
-	mp_ioapics[idx].mpc_type = MP_IOAPIC;
-	mp_ioapics[idx].mpc_flags = MPC_APIC_USABLE;
-	mp_ioapics[idx].mpc_apicaddr = address;
-
-	set_fixmap_nocache(FIX_IO_APIC_BASE_0 + idx, address);
-	mp_ioapics[idx].mpc_apicid = uniq_ioapic_id(id);
-#ifdef CONFIG_X86_32
-	mp_ioapics[idx].mpc_apicver = io_apic_get_version(idx);
-#else
-	mp_ioapics[idx].mpc_apicver = 0;
-#endif
-	/*
-	 * Build basic GSI lookup table to facilitate gsi->io_apic lookups
-	 * and to prevent reprogramming of IOAPIC pins (PCI GSIs).
-	 */
-	mp_ioapic_routing[idx].apic_id = mp_ioapics[idx].mpc_apicid;
-	mp_ioapic_routing[idx].gsi_base = gsi_base;
-	mp_ioapic_routing[idx].gsi_end = gsi_base +
-	    io_apic_get_redir_entries(idx);
-
-	printk(KERN_INFO "IOAPIC[%d]: apic_id %d, address 0x%x, "
-	       "GSI %d-%d\n", idx, mp_ioapics[idx].mpc_apicid,
-	       mp_ioapics[idx].mpc_apicver, mp_ioapics[idx].mpc_apicaddr,
-	       mp_ioapic_routing[idx].gsi_base, mp_ioapic_routing[idx].gsi_end);
-
-	nr_ioapics++;
-}
-
-void __init mp_override_legacy_irq(u8 bus_irq, u8 polarity, u8 trigger, u32 gsi)
-{
-	struct mpc_config_intsrc intsrc;
-	int ioapic = -1;
-	int pin = -1;
-
-	/*
-	 * Convert 'gsi' to 'ioapic.pin'.
-	 */
-	ioapic = mp_find_ioapic(gsi);
-	if (ioapic < 0)
-		return;
-	pin = gsi - mp_ioapic_routing[ioapic].gsi_base;
-
-	/*
-	 * TBD: This check is for faulty timer entries, where the override
-	 *      erroneously sets the trigger to level, resulting in a HUGE
-	 *      increase of timer interrupts!
-	 */
-	if ((bus_irq == 0) && (trigger == 3))
-		trigger = 1;
-
-	intsrc.mpc_type = MP_INTSRC;
-	intsrc.mpc_irqtype = mp_INT;
-	intsrc.mpc_irqflag = (trigger << 2) | polarity;
-	intsrc.mpc_srcbus = MP_ISA_BUS;
-	intsrc.mpc_srcbusirq = bus_irq;	/* IRQ */
-	intsrc.mpc_dstapic = mp_ioapics[ioapic].mpc_apicid;	/* APIC ID */
-	intsrc.mpc_dstirq = pin;	/* INTIN# */
-
-	Dprintk("Int: type %d, pol %d, trig %d, bus %d, irq %d, %d-%d\n",
-		intsrc.mpc_irqtype, intsrc.mpc_irqflag & 3,
-		(intsrc.mpc_irqflag >> 2) & 3, intsrc.mpc_srcbus,
-		intsrc.mpc_srcbusirq, intsrc.mpc_dstapic, intsrc.mpc_dstirq);
-
-	mp_irqs[mp_irq_entries] = intsrc;
-	if (++mp_irq_entries == MAX_IRQ_SOURCES)
-		panic("Max # of irq sources exceeded!\n");
-}
-
-int es7000_plat;
-
-void __init mp_config_acpi_legacy_irqs(void)
-{
-	struct mpc_config_intsrc intsrc;
-	int i = 0;
-	int ioapic = -1;
-
-#if defined (CONFIG_MCA) || defined (CONFIG_EISA)
-	/*
-	 * Fabricate the legacy ISA bus (bus #31).
-	 */
-	mp_bus_id_to_type[MP_ISA_BUS] = MP_BUS_ISA;
-#endif
-	set_bit(MP_ISA_BUS, mp_bus_not_pci);
-	Dprintk("Bus #%d is ISA\n", MP_ISA_BUS);
-
-	/*
-	 * Older generations of ES7000 have no legacy identity mappings
-	 */
-	if (es7000_plat == 1)
-		return;
-
-	/*
-	 * Locate the IOAPIC that manages the ISA IRQs (0-15).
-	 */
-	ioapic = mp_find_ioapic(0);
-	if (ioapic < 0)
-		return;
-
-	intsrc.mpc_type = MP_INTSRC;
-	intsrc.mpc_irqflag = 0;	/* Conforming */
-	intsrc.mpc_srcbus = MP_ISA_BUS;
-	intsrc.mpc_dstapic = mp_ioapics[ioapic].mpc_apicid;
-
-	/*
-	 * Use the default configuration for the IRQs 0-15.  Unless
-	 * overridden by (MADT) interrupt source override entries.
-	 */
-	for (i = 0; i < 16; i++) {
-		int idx;
-
-		for (idx = 0; idx < mp_irq_entries; idx++) {
-			struct mpc_config_intsrc *irq = mp_irqs + idx;
-
-			/* Do we already have a mapping for this ISA IRQ? */
-			if (irq->mpc_srcbus == MP_ISA_BUS
-			    && irq->mpc_srcbusirq == i)
-				break;
-
-			/* Do we already have a mapping for this IOAPIC pin */
-			if ((irq->mpc_dstapic == intsrc.mpc_dstapic) &&
-			    (irq->mpc_dstirq == i))
-				break;
-		}
-
-		if (idx != mp_irq_entries) {
-			printk(KERN_DEBUG "ACPI: IRQ%d used by override.\n", i);
-			continue;	/* IRQ already used */
-		}
-
-		intsrc.mpc_irqtype = mp_INT;
-		intsrc.mpc_srcbusirq = i;	/* Identity mapped */
-		intsrc.mpc_dstirq = i;
-
-		Dprintk("Int: type %d, pol %d, trig %d, bus %d, irq %d, "
-			"%d-%d\n", intsrc.mpc_irqtype, intsrc.mpc_irqflag & 3,
-			(intsrc.mpc_irqflag >> 2) & 3, intsrc.mpc_srcbus,
-			intsrc.mpc_srcbusirq, intsrc.mpc_dstapic,
-			intsrc.mpc_dstirq);
-
-		mp_irqs[mp_irq_entries] = intsrc;
-		if (++mp_irq_entries == MAX_IRQ_SOURCES)
-			panic("Max # of irq sources exceeded!\n");
-	}
-}
-
-int mp_register_gsi(u32 gsi, int triggering, int polarity)
-{
-	int ioapic = -1;
-	int ioapic_pin = 0;
-	int idx, bit = 0;
-#ifdef CONFIG_X86_32
-#define MAX_GSI_NUM	4096
-#define IRQ_COMPRESSION_START	64
-
-	static int pci_irq = IRQ_COMPRESSION_START;
-	/*
-	 * Mapping between Global System Interrupts, which
-	 * represent all possible interrupts, and IRQs
-	 * assigned to actual devices.
-	 */
-	static int gsi_to_irq[MAX_GSI_NUM];
-#else
-
-	if (acpi_irq_model != ACPI_IRQ_MODEL_IOAPIC)
-		return gsi;
-#endif
-
-	/* Don't set up the ACPI SCI because it's already set up */
-	if (acpi_gbl_FADT.sci_interrupt == gsi)
-		return gsi;
-
-	ioapic = mp_find_ioapic(gsi);
-	if (ioapic < 0) {
-		printk(KERN_WARNING "No IOAPIC for GSI %u\n", gsi);
-		return gsi;
-	}
-
-	ioapic_pin = gsi - mp_ioapic_routing[ioapic].gsi_base;
-
-#ifdef CONFIG_X86_32
-	if (ioapic_renumber_irq)
-		gsi = ioapic_renumber_irq(ioapic, gsi);
-#endif
-
-	/*
-	 * Avoid pin reprogramming.  PRTs typically include entries
-	 * with redundant pin->gsi mappings (but unique PCI devices);
-	 * we only program the IOAPIC on the first.
-	 */
-	bit = ioapic_pin % 32;
-	idx = (ioapic_pin < 32) ? 0 : (ioapic_pin / 32);
-	if (idx > 3) {
-		printk(KERN_ERR "Invalid reference to IOAPIC pin "
-		       "%d-%d\n", mp_ioapic_routing[ioapic].apic_id,
-		       ioapic_pin);
-		return gsi;
-	}
-	if ((1 << bit) & mp_ioapic_routing[ioapic].pin_programmed[idx]) {
-		Dprintk(KERN_DEBUG "Pin %d-%d already programmed\n",
-			mp_ioapic_routing[ioapic].apic_id, ioapic_pin);
-#ifdef CONFIG_X86_32
-		return (gsi < IRQ_COMPRESSION_START ? gsi : gsi_to_irq[gsi]);
-#else
-		return gsi;
-#endif
-	}
-
-	mp_ioapic_routing[ioapic].pin_programmed[idx] |= (1 << bit);
-#ifdef CONFIG_X86_32
-	/*
-	 * For GSI >= 64, use IRQ compression
-	 */
-	if ((gsi >= IRQ_COMPRESSION_START)
-	    && (triggering == ACPI_LEVEL_SENSITIVE)) {
-		/*
-		 * For PCI devices assign IRQs in order, avoiding gaps
-		 * due to unused I/O APIC pins.
-		 */
-		int irq = gsi;
-		if (gsi < MAX_GSI_NUM) {
-			/*
-			 * Retain the VIA chipset work-around (gsi > 15), but
-			 * avoid a problem where the 8254 timer (IRQ0) is setup
-			 * via an override (so it's not on pin 0 of the ioapic),
-			 * and at the same time, the pin 0 interrupt is a PCI
-			 * type.  The gsi > 15 test could cause these two pins
-			 * to be shared as IRQ0, and they are not shareable.
-			 * So test for this condition, and if necessary, avoid
-			 * the pin collision.
-			 */
-			gsi = pci_irq++;
-			/*
-			 * Don't assign IRQ used by ACPI SCI
-			 */
-			if (gsi == acpi_gbl_FADT.sci_interrupt)
-				gsi = pci_irq++;
-			gsi_to_irq[irq] = gsi;
-		} else {
-			printk(KERN_ERR "GSI %u is too high\n", gsi);
-			return gsi;
-		}
-	}
-#endif
-	io_apic_set_pci_routing(ioapic, ioapic_pin, gsi,
-				triggering == ACPI_EDGE_SENSITIVE ? 0 : 1,
-				polarity == ACPI_ACTIVE_HIGH ? 0 : 1);
-	return gsi;
-}
-
-#endif /* CONFIG_X86_IO_APIC */
-#endif /* CONFIG_ACPI */