x86: remove acpi_srat config v2

use ACPI_NUMA directly

and move srat_32.c to mm/

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

1 files changed, 280 insertions, 0 deletions

diff --git a/arch/x86/mm/srat_32.c b/arch/x86/mm/srat_32.c
new file mode 100644
index 00000000000..f41d67f8f83
--- /dev/null
+++ b/arch/x86/mm/srat_32.c
@@ -0,0 +1,280 @@
+/*
+ * Some of the code in this file has been gleaned from the 64 bit 
+ * discontigmem support code base.
+ *
+ * Copyright (C) 2002, IBM Corp.
+ *
+ * All rights reserved.          
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT.  See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Send feedback to Pat Gaughen <gone@us.ibm.com>
+ */
+#include <linux/mm.h>
+#include <linux/bootmem.h>
+#include <linux/mmzone.h>
+#include <linux/acpi.h>
+#include <linux/nodemask.h>
+#include <asm/srat.h>
+#include <asm/topology.h>
+#include <asm/smp.h>
+#include <asm/e820.h>
+
+/*
+ * proximity macros and definitions
+ */
+#define NODE_ARRAY_INDEX(x)	((x) / 8)	/* 8 bits/char */
+#define NODE_ARRAY_OFFSET(x)	((x) % 8)	/* 8 bits/char */
+#define BMAP_SET(bmap, bit)	((bmap)[NODE_ARRAY_INDEX(bit)] |= 1 << NODE_ARRAY_OFFSET(bit))
+#define BMAP_TEST(bmap, bit)	((bmap)[NODE_ARRAY_INDEX(bit)] & (1 << NODE_ARRAY_OFFSET(bit)))
+/* bitmap length; _PXM is at most 255 */
+#define PXM_BITMAP_LEN (MAX_PXM_DOMAINS / 8) 
+static u8 __initdata pxm_bitmap[PXM_BITMAP_LEN];	/* bitmap of proximity domains */
+
+#define MAX_CHUNKS_PER_NODE	3
+#define MAXCHUNKS		(MAX_CHUNKS_PER_NODE * MAX_NUMNODES)
+struct node_memory_chunk_s {
+	unsigned long	start_pfn;
+	unsigned long	end_pfn;
+	u8	pxm;		// proximity domain of node
+	u8	nid;		// which cnode contains this chunk?
+	u8	bank;		// which mem bank on this node
+};
+static struct node_memory_chunk_s __initdata node_memory_chunk[MAXCHUNKS];
+
+static int __initdata num_memory_chunks; /* total number of memory chunks */
+static u8 __initdata apicid_to_pxm[MAX_APICID];
+
+int numa_off __initdata;
+int acpi_numa __initdata;
+
+static __init void bad_srat(void)
+{
+        printk(KERN_ERR "SRAT: SRAT not used.\n");
+        acpi_numa = -1;
+	num_memory_chunks = 0;
+}
+
+static __init inline int srat_disabled(void)
+{
+	return numa_off || acpi_numa < 0;
+}
+
+/* Identify CPU proximity domains */
+void __init
+acpi_numa_processor_affinity_init(struct acpi_srat_cpu_affinity *cpu_affinity)
+{
+	if (srat_disabled())
+		return;
+	if (cpu_affinity->header.length !=
+	     sizeof(struct acpi_srat_cpu_affinity)) {
+		bad_srat();
+		return;
+	}
+
+	if ((cpu_affinity->flags & ACPI_SRAT_CPU_ENABLED) == 0)
+		return;		/* empty entry */
+
+	/* mark this node as "seen" in node bitmap */
+	BMAP_SET(pxm_bitmap, cpu_affinity->proximity_domain_lo);
+
+	apicid_to_pxm[cpu_affinity->apic_id] = cpu_affinity->proximity_domain_lo;
+
+	printk(KERN_DEBUG "CPU %02x in proximity domain %02x\n",
+		cpu_affinity->apic_id, cpu_affinity->proximity_domain_lo);
+}
+
+/*
+ * Identify memory proximity domains and hot-remove capabilities.
+ * Fill node memory chunk list structure.
+ */
+void __init
+acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *memory_affinity)
+{
+	unsigned long long paddr, size;
+	unsigned long start_pfn, end_pfn;
+	u8 pxm;
+	struct node_memory_chunk_s *p, *q, *pend;
+
+	if (srat_disabled())
+		return;
+	if (memory_affinity->header.length !=
+	     sizeof(struct acpi_srat_mem_affinity)) {
+		bad_srat();
+		return;
+	}
+
+	if ((memory_affinity->flags & ACPI_SRAT_MEM_ENABLED) == 0)
+		return;		/* empty entry */
+
+	pxm = memory_affinity->proximity_domain & 0xff;
+
+	/* mark this node as "seen" in node bitmap */
+	BMAP_SET(pxm_bitmap, pxm);
+
+	/* calculate info for memory chunk structure */
+	paddr = memory_affinity->base_address;
+	size = memory_affinity->length;
+
+	start_pfn = paddr >> PAGE_SHIFT;
+	end_pfn = (paddr + size) >> PAGE_SHIFT;
+
+
+	if (num_memory_chunks >= MAXCHUNKS) {
+		printk(KERN_WARNING "Too many mem chunks in SRAT."
+			" Ignoring %lld MBytes at %llx\n",
+			size/(1024*1024), paddr);
+		return;
+	}
+
+	/* Insertion sort based on base address */
+	pend = &node_memory_chunk[num_memory_chunks];
+	for (p = &node_memory_chunk[0]; p < pend; p++) {
+		if (start_pfn < p->start_pfn)
+			break;
+	}
+	if (p < pend) {
+		for (q = pend; q >= p; q--)
+			*(q + 1) = *q;
+	}
+	p->start_pfn = start_pfn;
+	p->end_pfn = end_pfn;
+	p->pxm = pxm;
+
+	num_memory_chunks++;
+
+	printk(KERN_DEBUG "Memory range %08lx to %08lx (type %x)"
+			  " in proximity domain %02x %s\n",
+		start_pfn, end_pfn,
+		memory_affinity->memory_type,
+		pxm,
+		((memory_affinity->flags & ACPI_SRAT_MEM_HOT_PLUGGABLE) ?
+		 "enabled and removable" : "enabled" ) );
+}
+
+/* Callback for SLIT parsing */
+void __init acpi_numa_slit_init(struct acpi_table_slit *slit)
+{
+}
+
+void acpi_numa_arch_fixup(void)
+{
+}
+/*
+ * The SRAT table always lists ascending addresses, so can always
+ * assume that the first "start" address that you see is the real
+ * start of the node, and that the current "end" address is after
+ * the previous one.
+ */
+static __init void node_read_chunk(int nid, struct node_memory_chunk_s *memory_chunk)
+{
+	/*
+	 * Only add present memory as told by the e820.
+	 * There is no guarantee from the SRAT that the memory it
+	 * enumerates is present at boot time because it represents
+	 * *possible* memory hotplug areas the same as normal RAM.
+	 */
+	if (memory_chunk->start_pfn >= max_pfn) {
+		printk(KERN_INFO "Ignoring SRAT pfns: %08lx - %08lx\n",
+			memory_chunk->start_pfn, memory_chunk->end_pfn);
+		return;
+	}
+	if (memory_chunk->nid != nid)
+		return;
+
+	if (!node_has_online_mem(nid))
+		node_start_pfn[nid] = memory_chunk->start_pfn;
+
+	if (node_start_pfn[nid] > memory_chunk->start_pfn)
+		node_start_pfn[nid] = memory_chunk->start_pfn;
+
+	if (node_end_pfn[nid] < memory_chunk->end_pfn)
+		node_end_pfn[nid] = memory_chunk->end_pfn;
+}
+
+int __init get_memcfg_from_srat(void)
+{
+	int i, j, nid;
+
+
+	if (srat_disabled())
+		goto out_fail;
+
+	if (num_memory_chunks == 0) {
+		printk(KERN_WARNING
+			 "could not finy any ACPI SRAT memory areas.\n");
+		goto out_fail;
+	}
+
+	/* Calculate total number of nodes in system from PXM bitmap and create
+	 * a set of sequential node IDs starting at zero.  (ACPI doesn't seem
+	 * to specify the range of _PXM values.)
+	 */
+	/*
+	 * MCD - we no longer HAVE to number nodes sequentially.  PXM domain
+	 * numbers could go as high as 256, and MAX_NUMNODES for i386 is typically
+	 * 32, so we will continue numbering them in this manner until MAX_NUMNODES
+	 * approaches MAX_PXM_DOMAINS for i386.
+	 */
+	nodes_clear(node_online_map);
+	for (i = 0; i < MAX_PXM_DOMAINS; i++) {
+		if (BMAP_TEST(pxm_bitmap, i)) {
+			int nid = acpi_map_pxm_to_node(i);
+			node_set_online(nid);
+		}
+	}
+	BUG_ON(num_online_nodes() == 0);
+
+	/* set cnode id in memory chunk structure */
+	for (i = 0; i < num_memory_chunks; i++)
+		node_memory_chunk[i].nid = pxm_to_node(node_memory_chunk[i].pxm);
+
+	printk(KERN_DEBUG "pxm bitmap: ");
+	for (i = 0; i < sizeof(pxm_bitmap); i++) {
+		printk(KERN_CONT "%02x ", pxm_bitmap[i]);
+	}
+	printk(KERN_CONT "\n");
+	printk(KERN_DEBUG "Number of logical nodes in system = %d\n",
+			 num_online_nodes());
+	printk(KERN_DEBUG "Number of memory chunks in system = %d\n",
+			 num_memory_chunks);
+
+	for (i = 0; i < MAX_APICID; i++)
+		apicid_2_node[i] = pxm_to_node(apicid_to_pxm[i]);
+
+	for (j = 0; j < num_memory_chunks; j++){
+		struct node_memory_chunk_s * chunk = &node_memory_chunk[j];
+		printk(KERN_DEBUG
+			"chunk %d nid %d start_pfn %08lx end_pfn %08lx\n",
+		       j, chunk->nid, chunk->start_pfn, chunk->end_pfn);
+		node_read_chunk(chunk->nid, chunk);
+		e820_register_active_regions(chunk->nid, chunk->start_pfn,
+					     min(chunk->end_pfn, max_pfn));
+	}
+
+	for_each_online_node(nid) {
+		unsigned long start = node_start_pfn[nid];
+		unsigned long end = min(node_end_pfn[nid], max_pfn);
+
+		memory_present(nid, start, end);
+		node_remap_size[nid] = node_memmap_size_bytes(nid, start, end);
+	}
+	return 1;
+out_fail:
+	printk(KERN_ERR "failed to get NUMA memory information from SRAT"
+			" table\n");
+	return 0;
+}