Merge branch 'master' into x86/memblock

Conflicts & resolutions:

* arch/x86/xen/setup.c

	dc91c728fd "xen: allow extra memory to be in multiple regions"
	24aa07882b "memblock, x86: Replace memblock_x86_reserve/free..."

	conflicted on xen_add_extra_mem() updates.  The resolution is
	trivial as the latter just want to replace
	memblock_x86_reserve_range() with memblock_reserve().

* drivers/pci/intel-iommu.c

	166e9278a3f "x86/ia64: intel-iommu: move to drivers/iommu/"
	5dfe8660a3d "bootmem: Replace work_with_active_regions() with..."

	conflicted as the former moved the file under drivers/iommu/.
	Resolved by applying the chnages from the latter on the moved
	file.

* mm/Kconfig

	6661672053a "memblock: add NO_BOOTMEM config symbol"
	c378ddd53f9 "memblock, x86: Make ARCH_DISCARD_MEMBLOCK a config option"

	conflicted trivially.  Both added config options.  Just
	letting both add their own options resolves the conflict.

* mm/memblock.c

	d1f0ece6cdc "mm/memblock.c: small function definition fixes"
	ed7b56a799c "memblock: Remove memblock_memory_can_coalesce()"

	confliected.  The former updates function removed by the
	latter.  Resolution is trivial.

Signed-off-by: Tejun Heo <tj@kernel.org>

22 files changed, 2970 insertions, 219 deletions

diff --git a/arch/x86/platform/Makefile b/arch/x86/platform/Makefile
index 021eee91c05..8d874396cb2 100644
--- a/arch/x86/platform/Makefile
+++ b/arch/x86/platform/Makefile
@@ -1,6 +1,7 @@
 # Platform specific code goes here
 obj-y	+= ce4100/
 obj-y	+= efi/
+obj-y	+= geode/
 obj-y	+= iris/
 obj-y	+= mrst/
 obj-y	+= olpc/
diff --git a/arch/x86/platform/ce4100/ce4100.c b/arch/x86/platform/ce4100/ce4100.c
index 28071bb31db..4c61b52191e 100644
--- a/arch/x86/platform/ce4100/ce4100.c
+++ b/arch/x86/platform/ce4100/ce4100.c
@@ -109,7 +109,7 @@ static __init void sdv_serial_fixup(void)
 }
 
 #else
-static inline void sdv_serial_fixup(void);
+static inline void sdv_serial_fixup(void) {};
 #endif
 
 static void __init sdv_arch_setup(void)
diff --git a/arch/x86/platform/efi/efi.c b/arch/x86/platform/efi/efi.c
index 3b4e86bda3c..4a01967f02e 100644
--- a/arch/x86/platform/efi/efi.c
+++ b/arch/x86/platform/efi/efi.c
@@ -29,6 +29,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/efi.h>
+#include <linux/export.h>
 #include <linux/bootmem.h>
 #include <linux/memblock.h>
 #include <linux/spinlock.h>
@@ -51,7 +52,17 @@
 int efi_enabled;
 EXPORT_SYMBOL(efi_enabled);
 
-struct efi efi;
+struct efi __read_mostly efi = {
+	.mps        = EFI_INVALID_TABLE_ADDR,
+	.acpi       = EFI_INVALID_TABLE_ADDR,
+	.acpi20     = EFI_INVALID_TABLE_ADDR,
+	.smbios     = EFI_INVALID_TABLE_ADDR,
+	.sal_systab = EFI_INVALID_TABLE_ADDR,
+	.boot_info  = EFI_INVALID_TABLE_ADDR,
+	.hcdp       = EFI_INVALID_TABLE_ADDR,
+	.uga        = EFI_INVALID_TABLE_ADDR,
+	.uv_systab  = EFI_INVALID_TABLE_ADDR,
+};
 EXPORT_SYMBOL(efi);
 
 struct efi_memory_map memmap;
@@ -79,26 +90,50 @@ early_param("add_efi_memmap", setup_add_efi_memmap);
 
 static efi_status_t virt_efi_get_time(efi_time_t *tm, efi_time_cap_t *tc)
 {
-	return efi_call_virt2(get_time, tm, tc);
+	unsigned long flags;
+	efi_status_t status;
+
+	spin_lock_irqsave(&rtc_lock, flags);
+	status = efi_call_virt2(get_time, tm, tc);
+	spin_unlock_irqrestore(&rtc_lock, flags);
+	return status;
 }
 
 static efi_status_t virt_efi_set_time(efi_time_t *tm)
 {
-	return efi_call_virt1(set_time, tm);
+	unsigned long flags;
+	efi_status_t status;
+
+	spin_lock_irqsave(&rtc_lock, flags);
+	status = efi_call_virt1(set_time, tm);
+	spin_unlock_irqrestore(&rtc_lock, flags);
+	return status;
 }
 
 static efi_status_t virt_efi_get_wakeup_time(efi_bool_t *enabled,
 					     efi_bool_t *pending,
 					     efi_time_t *tm)
 {
-	return efi_call_virt3(get_wakeup_time,
-			      enabled, pending, tm);
+	unsigned long flags;
+	efi_status_t status;
+
+	spin_lock_irqsave(&rtc_lock, flags);
+	status = efi_call_virt3(get_wakeup_time,
+				enabled, pending, tm);
+	spin_unlock_irqrestore(&rtc_lock, flags);
+	return status;
 }
 
 static efi_status_t virt_efi_set_wakeup_time(efi_bool_t enabled, efi_time_t *tm)
 {
-	return efi_call_virt2(set_wakeup_time,
-			      enabled, tm);
+	unsigned long flags;
+	efi_status_t status;
+
+	spin_lock_irqsave(&rtc_lock, flags);
+	status = efi_call_virt2(set_wakeup_time,
+				enabled, tm);
+	spin_unlock_irqrestore(&rtc_lock, flags);
+	return status;
 }
 
 static efi_status_t virt_efi_get_variable(efi_char16_t *name,
@@ -122,7 +157,7 @@ static efi_status_t virt_efi_get_next_variable(unsigned long *name_size,
 
 static efi_status_t virt_efi_set_variable(efi_char16_t *name,
 					  efi_guid_t *vendor,
-					  unsigned long attr,
+					  u32 attr,
 					  unsigned long data_size,
 					  void *data)
 {
@@ -131,6 +166,18 @@ static efi_status_t virt_efi_set_variable(efi_char16_t *name,
 			      data_size, data);
 }
 
+static efi_status_t virt_efi_query_variable_info(u32 attr,
+						 u64 *storage_space,
+						 u64 *remaining_space,
+						 u64 *max_variable_size)
+{
+	if (efi.runtime_version < EFI_2_00_SYSTEM_TABLE_REVISION)
+		return EFI_UNSUPPORTED;
+
+	return efi_call_virt4(query_variable_info, attr, storage_space,
+			      remaining_space, max_variable_size);
+}
+
 static efi_status_t virt_efi_get_next_high_mono_count(u32 *count)
 {
 	return efi_call_virt1(get_next_high_mono_count, count);
@@ -145,6 +192,28 @@ static void virt_efi_reset_system(int reset_type,
 		       data_size, data);
 }
 
+static efi_status_t virt_efi_update_capsule(efi_capsule_header_t **capsules,
+					    unsigned long count,
+					    unsigned long sg_list)
+{
+	if (efi.runtime_version < EFI_2_00_SYSTEM_TABLE_REVISION)
+		return EFI_UNSUPPORTED;
+
+	return efi_call_virt3(update_capsule, capsules, count, sg_list);
+}
+
+static efi_status_t virt_efi_query_capsule_caps(efi_capsule_header_t **capsules,
+						unsigned long count,
+						u64 *max_size,
+						int *reset_type)
+{
+	if (efi.runtime_version < EFI_2_00_SYSTEM_TABLE_REVISION)
+		return EFI_UNSUPPORTED;
+
+	return efi_call_virt4(query_capsule_caps, capsules, count, max_size,
+			      reset_type);
+}
+
 static efi_status_t __init phys_efi_set_virtual_address_map(
 	unsigned long memory_map_size,
 	unsigned long descriptor_size,
@@ -164,11 +233,14 @@ static efi_status_t __init phys_efi_set_virtual_address_map(
 static efi_status_t __init phys_efi_get_time(efi_time_t *tm,
 					     efi_time_cap_t *tc)
 {
+	unsigned long flags;
 	efi_status_t status;
 
+	spin_lock_irqsave(&rtc_lock, flags);
 	efi_call_phys_prelog();
 	status = efi_call_phys2(efi_phys.get_time, tm, tc);
 	efi_call_phys_epilog();
+	spin_unlock_irqrestore(&rtc_lock, flags);
 	return status;
 }
 
@@ -666,6 +738,9 @@ void __init efi_enter_virtual_mode(void)
 	efi.get_next_high_mono_count = virt_efi_get_next_high_mono_count;
 	efi.reset_system = virt_efi_reset_system;
 	efi.set_virtual_address_map = NULL;
+	efi.query_variable_info = virt_efi_query_variable_info;
+	efi.update_capsule = virt_efi_update_capsule;
+	efi.query_capsule_caps = virt_efi_query_capsule_caps;
 	if (__supported_pte_mask & _PAGE_NX)
 		runtime_code_page_mkexec();
 	early_iounmap(memmap.map, memmap.nr_map * memmap.desc_size);
diff --git a/arch/x86/platform/efi/efi_32.c b/arch/x86/platform/efi/efi_32.c
index 5cab48ee61a..e36bf714cb7 100644
--- a/arch/x86/platform/efi/efi_32.c
+++ b/arch/x86/platform/efi/efi_32.c
@@ -25,6 +25,7 @@
 #include <linux/efi.h>
 
 #include <asm/io.h>
+#include <asm/desc.h>
 #include <asm/page.h>
 #include <asm/pgtable.h>
 #include <asm/tlbflush.h>
diff --git a/arch/x86/platform/geode/Makefile b/arch/x86/platform/geode/Makefile
new file mode 100644
index 00000000000..07c9cd05021
--- /dev/null
+++ b/arch/x86/platform/geode/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_ALIX)		+= alix.o
diff --git a/arch/x86/platform/geode/alix.c b/arch/x86/platform/geode/alix.c
new file mode 100644
index 00000000000..ca1973699d3
--- /dev/null
+++ b/arch/x86/platform/geode/alix.c
@@ -0,0 +1,142 @@
+/*
+ * System Specific setup for PCEngines ALIX.
+ * At the moment this means setup of GPIO control of LEDs
+ * on Alix.2/3/6 boards.
+ *
+ *
+ * Copyright (C) 2008 Constantin Baranov <const@mimas.ru>
+ * Copyright (C) 2011 Ed Wildgoose <kernel@wildgooses.com>
+ *
+ * TODO: There are large similarities with leds-net5501.c
+ * by Alessandro Zummo <a.zummo@towertech.it>
+ * In the future leds-net5501.c should be migrated over to platform
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/string.h>
+#include <linux/module.h>
+#include <linux/leds.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+
+#include <asm/geode.h>
+
+static int force = 0;
+module_param(force, bool, 0444);
+/* FIXME: Award bios is not automatically detected as Alix platform */
+MODULE_PARM_DESC(force, "Force detection as ALIX.2/ALIX.3 platform");
+
+static struct gpio_led alix_leds[] = {
+	{
+		.name = "alix:1",
+		.gpio = 6,
+		.default_trigger = "default-on",
+		.active_low = 1,
+	},
+	{
+		.name = "alix:2",
+		.gpio = 25,
+		.default_trigger = "default-off",
+		.active_low = 1,
+	},
+	{
+		.name = "alix:3",
+		.gpio = 27,
+		.default_trigger = "default-off",
+		.active_low = 1,
+	},
+};
+
+static struct gpio_led_platform_data alix_leds_data = {
+	.num_leds = ARRAY_SIZE(alix_leds),
+	.leds = alix_leds,
+};
+
+static struct platform_device alix_leds_dev = {
+	.name = "leds-gpio",
+	.id = -1,
+	.dev.platform_data = &alix_leds_data,
+};
+
+static void __init register_alix(void)
+{
+	/* Setup LED control through leds-gpio driver */
+	platform_device_register(&alix_leds_dev);
+}
+
+static int __init alix_present(unsigned long bios_phys,
+				const char *alix_sig,
+				size_t alix_sig_len)
+{
+	const size_t bios_len = 0x00010000;
+	const char *bios_virt;
+	const char *scan_end;
+	const char *p;
+	char name[64];
+
+	if (force) {
+		printk(KERN_NOTICE "%s: forced to skip BIOS test, "
+		       "assume system is ALIX.2/ALIX.3\n",
+		       KBUILD_MODNAME);
+		return 1;
+	}
+
+	bios_virt = phys_to_virt(bios_phys);
+	scan_end = bios_virt + bios_len - (alix_sig_len + 2);
+	for (p = bios_virt; p < scan_end; p++) {
+		const char *tail;
+		char *a;
+
+		if (memcmp(p, alix_sig, alix_sig_len) != 0)
+			continue;
+
+		memcpy(name, p, sizeof(name));
+
+		/* remove the first \0 character from string */
+		a = strchr(name, '\0');
+		if (a)
+			*a = ' ';
+
+		/* cut the string at a newline */
+		a = strchr(name, '\r');
+		if (a)
+			*a = '\0';
+
+		tail = p + alix_sig_len;
+		if ((tail[0] == '2' || tail[0] == '3')) {
+			printk(KERN_INFO
+			       "%s: system is recognized as \"%s\"\n",
+			       KBUILD_MODNAME, name);
+			return 1;
+		}
+	}
+
+	return 0;
+}
+
+static int __init alix_init(void)
+{
+	const char tinybios_sig[] = "PC Engines ALIX.";
+	const char coreboot_sig[] = "PC Engines\0ALIX.";
+
+	if (!is_geode())
+		return 0;
+
+	if (alix_present(0xf0000, tinybios_sig, sizeof(tinybios_sig) - 1) ||
+	    alix_present(0x500, coreboot_sig, sizeof(coreboot_sig) - 1))
+		register_alix();
+
+	return 0;
+}
+
+module_init(alix_init);
+
+MODULE_AUTHOR("Ed Wildgoose <kernel@wildgooses.com>");
+MODULE_DESCRIPTION("PCEngines ALIX System Setup");
+MODULE_LICENSE("GPL");
diff --git a/arch/x86/platform/mrst/Makefile b/arch/x86/platform/mrst/Makefile
index f61ccdd4934..1ea38775a6d 100644
--- a/arch/x86/platform/mrst/Makefile
+++ b/arch/x86/platform/mrst/Makefile
@@ -1,3 +1,4 @@
 obj-$(CONFIG_X86_MRST)		+= mrst.o
 obj-$(CONFIG_X86_MRST)		+= vrtc.o
 obj-$(CONFIG_EARLY_PRINTK_MRST)	+= early_printk_mrst.o
+obj-$(CONFIG_X86_MRST)		+= pmu.o
diff --git a/arch/x86/platform/mrst/mrst.c b/arch/x86/platform/mrst/mrst.c
index 7000e74b308..b1489a06a49 100644
--- a/arch/x86/platform/mrst/mrst.c
+++ b/arch/x86/platform/mrst/mrst.c
@@ -14,6 +14,8 @@
 
 #include <linux/init.h>
 #include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/scatterlist.h>
 #include <linux/sfi.h>
 #include <linux/intel_pmic_gpio.h>
 #include <linux/spi/spi.h>
@@ -24,6 +26,8 @@
 #include <linux/platform_device.h>
 #include <linux/irq.h>
 #include <linux/module.h>
+#include <linux/notifier.h>
+#include <linux/mfd/intel_msic.h>
 
 #include <asm/setup.h>
 #include <asm/mpspec_def.h>
@@ -183,11 +187,34 @@ int __init sfi_parse_mrtc(struct sfi_table_header *table)
 static unsigned long __init mrst_calibrate_tsc(void)
 {
 	unsigned long flags, fast_calibrate;
-
-	local_irq_save(flags);
-	fast_calibrate = apbt_quick_calibrate();
-	local_irq_restore(flags);
-
+	if (__mrst_cpu_chip == MRST_CPU_CHIP_PENWELL) {
+		u32 lo, hi, ratio, fsb;
+
+		rdmsr(MSR_IA32_PERF_STATUS, lo, hi);
+		pr_debug("IA32 perf status is 0x%x, 0x%0x\n", lo, hi);
+		ratio = (hi >> 8) & 0x1f;
+		pr_debug("ratio is %d\n", ratio);
+		if (!ratio) {
+			pr_err("read a zero ratio, should be incorrect!\n");
+			pr_err("force tsc ratio to 16 ...\n");
+			ratio = 16;
+		}
+		rdmsr(MSR_FSB_FREQ, lo, hi);
+		if ((lo & 0x7) == 0x7)
+			fsb = PENWELL_FSB_FREQ_83SKU;
+		else
+			fsb = PENWELL_FSB_FREQ_100SKU;
+		fast_calibrate = ratio * fsb;
+		pr_debug("read penwell tsc %lu khz\n", fast_calibrate);
+		lapic_timer_frequency = fsb * 1000 / HZ;
+		/* mark tsc clocksource as reliable */
+		set_cpu_cap(&boot_cpu_data, X86_FEATURE_TSC_RELIABLE);
+	} else {
+		local_irq_save(flags);
+		fast_calibrate = apbt_quick_calibrate();
+		local_irq_restore(flags);
+	}
+	
 	if (fast_calibrate)
 		return fast_calibrate;
 
@@ -250,6 +277,17 @@ static void mrst_reboot(void)
 }
 
 /*
+ * Moorestown does not have external NMI source nor port 0x61 to report
+ * NMI status. The possible NMI sources are from pmu as a result of NMI
+ * watchdog or lock debug. Reading io port 0x61 results in 0xff which
+ * misled NMI handler.
+ */
+static unsigned char mrst_get_nmi_reason(void)
+{
+	return 0;
+}
+
+/*
  * Moorestown specific x86_init function overrides and early setup
  * calls.
  */
@@ -270,6 +308,8 @@ void __init x86_mrst_early_setup(void)
 	x86_platform.calibrate_tsc = mrst_calibrate_tsc;
 	x86_platform.i8042_detect = mrst_i8042_detect;
 	x86_init.timers.wallclock_init = mrst_rtc_init;
+	x86_platform.get_nmi_reason = mrst_get_nmi_reason;
+
 	x86_init.pci.init = pci_mrst_init;
 	x86_init.pci.fixup_irqs = x86_init_noop;
 
@@ -392,6 +432,7 @@ static void __init *max3111_platform_data(void *info)
 	struct spi_board_info *spi_info = info;
 	int intr = get_gpio_by_name("max3111_int");
 
+	spi_info->mode = SPI_MODE_0;
 	if (intr == -1)
 		return NULL;
 	spi_info->irq = intr + MRST_IRQ_OFFSET;
@@ -480,7 +521,130 @@ static void __init *no_platform_data(void *info)
 	return NULL;
 }
 
+static struct resource msic_resources[] = {
+	{
+		.start	= INTEL_MSIC_IRQ_PHYS_BASE,
+		.end	= INTEL_MSIC_IRQ_PHYS_BASE + 64 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct intel_msic_platform_data msic_pdata;
+
+static struct platform_device msic_device = {
+	.name		= "intel_msic",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &msic_pdata,
+	},
+	.num_resources	= ARRAY_SIZE(msic_resources),
+	.resource	= msic_resources,
+};
+
+static inline bool mrst_has_msic(void)
+{
+	return mrst_identify_cpu() == MRST_CPU_CHIP_PENWELL;
+}
+
+static int msic_scu_status_change(struct notifier_block *nb,
+				  unsigned long code, void *data)
+{
+	if (code == SCU_DOWN) {
+		platform_device_unregister(&msic_device);
+		return 0;
+	}
+
+	return platform_device_register(&msic_device);
+}
+
+static int __init msic_init(void)
+{
+	static struct notifier_block msic_scu_notifier = {
+		.notifier_call	= msic_scu_status_change,
+	};
+
+	/*
+	 * We need to be sure that the SCU IPC is ready before MSIC device
+	 * can be registered.
+	 */
+	if (mrst_has_msic())
+		intel_scu_notifier_add(&msic_scu_notifier);
+
+	return 0;
+}
+arch_initcall(msic_init);
+
+/*
+ * msic_generic_platform_data - sets generic platform data for the block
+ * @info: pointer to the SFI device table entry for this block
+ * @block: MSIC block
+ *
+ * Function sets IRQ number from the SFI table entry for given device to
+ * the MSIC platform data.
+ */
+static void *msic_generic_platform_data(void *info, enum intel_msic_block block)
+{
+	struct sfi_device_table_entry *entry = info;
+
+	BUG_ON(block < 0 || block >= INTEL_MSIC_BLOCK_LAST);
+	msic_pdata.irq[block] = entry->irq;
+
+	return no_platform_data(info);
+}
+
+static void *msic_battery_platform_data(void *info)
+{
+	return msic_generic_platform_data(info, INTEL_MSIC_BLOCK_BATTERY);
+}
+
+static void *msic_gpio_platform_data(void *info)
+{
+	static struct intel_msic_gpio_pdata pdata;
+	int gpio = get_gpio_by_name("msic_gpio_base");
+
+	if (gpio < 0)
+		return NULL;
+
+	pdata.gpio_base = gpio;
+	msic_pdata.gpio = &pdata;
+
+	return msic_generic_platform_data(info, INTEL_MSIC_BLOCK_GPIO);
+}
+
+static void *msic_audio_platform_data(void *info)
+{
+	struct platform_device *pdev;
+
+	pdev = platform_device_register_simple("sst-platform", -1, NULL, 0);
+	if (IS_ERR(pdev)) {
+		pr_err("failed to create audio platform device\n");
+		return NULL;
+	}
+
+	return msic_generic_platform_data(info, INTEL_MSIC_BLOCK_AUDIO);
+}
+
+static void *msic_power_btn_platform_data(void *info)
+{
+	return msic_generic_platform_data(info, INTEL_MSIC_BLOCK_POWER_BTN);
+}
+
+static void *msic_ocd_platform_data(void *info)
+{
+	static struct intel_msic_ocd_pdata pdata;
+	int gpio = get_gpio_by_name("ocd_gpio");
+
+	if (gpio < 0)
+		return NULL;
+
+	pdata.gpio = gpio;
+	msic_pdata.ocd = &pdata;
+
+	return msic_generic_platform_data(info, INTEL_MSIC_BLOCK_OCD);
+}
+
 static const struct devs_id __initconst device_ids[] = {
+	{"bma023", SFI_DEV_TYPE_I2C, 1, &no_platform_data},
 	{"pmic_gpio", SFI_DEV_TYPE_SPI, 1, &pmic_gpio_platform_data},
 	{"spi_max3111", SFI_DEV_TYPE_SPI, 0, &max3111_platform_data},
 	{"i2c_max7315", SFI_DEV_TYPE_I2C, 1, &max7315_platform_data},
@@ -488,7 +652,14 @@ static const struct devs_id __initconst device_ids[] = {
 	{"emc1403", SFI_DEV_TYPE_I2C, 1, &emc1403_platform_data},
 	{"i2c_accel", SFI_DEV_TYPE_I2C, 0, &lis331dl_platform_data},
 	{"pmic_audio", SFI_DEV_TYPE_IPC, 1, &no_platform_data},
-	{"msic_audio", SFI_DEV_TYPE_IPC, 1, &no_platform_data},
+
+	/* MSIC subdevices */
+	{"msic_battery", SFI_DEV_TYPE_IPC, 1, &msic_battery_platform_data},
+	{"msic_gpio", SFI_DEV_TYPE_IPC, 1, &msic_gpio_platform_data},
+	{"msic_audio", SFI_DEV_TYPE_IPC, 1, &msic_audio_platform_data},
+	{"msic_power_btn", SFI_DEV_TYPE_IPC, 1, &msic_power_btn_platform_data},
+	{"msic_ocd", SFI_DEV_TYPE_IPC, 1, &msic_ocd_platform_data},
+
 	{},
 };
 
@@ -555,6 +726,9 @@ static void __init intel_scu_i2c_device_register(int bus,
 	i2c_devs[i2c_next_dev++] = new_dev;
 }
 
+BLOCKING_NOTIFIER_HEAD(intel_scu_notifier);
+EXPORT_SYMBOL_GPL(intel_scu_notifier);
+
 /* Called by IPC driver */
 void intel_scu_devices_create(void)
 {
@@ -579,6 +753,7 @@ void intel_scu_devices_create(void)
 		} else
 			i2c_register_board_info(i2c_bus[i], i2c_devs[i], 1);
 	}
+	intel_scu_notifier_post(SCU_AVAILABLE, 0L);
 }
 EXPORT_SYMBOL_GPL(intel_scu_devices_create);
 
@@ -587,6 +762,8 @@ void intel_scu_devices_destroy(void)
 {
 	int i;
 
+	intel_scu_notifier_post(SCU_DOWN, 0L);
+
 	for (i = 0; i < ipc_next_dev; i++)
 		platform_device_del(ipc_devs[i]);
 }
@@ -603,19 +780,37 @@ static void __init install_irq_resource(struct platform_device *pdev, int irq)
 	platform_device_add_resources(pdev, &res, 1);
 }
 
-static void __init sfi_handle_ipc_dev(struct platform_device *pdev)
+static void __init sfi_handle_ipc_dev(struct sfi_device_table_entry *entry)
 {
 	const struct devs_id *dev = device_ids;
+	struct platform_device *pdev;
 	void *pdata = NULL;
 
 	while (dev->name[0]) {
 		if (dev->type == SFI_DEV_TYPE_IPC &&
-			!strncmp(dev->name, pdev->name, SFI_NAME_LEN)) {
-			pdata = dev->get_platform_data(pdev);
+			!strncmp(dev->name, entry->name, SFI_NAME_LEN)) {
+			pdata = dev->get_platform_data(entry);
 			break;
 		}
 		dev++;
 	}
+
+	/*
+	 * On Medfield the platform device creation is handled by the MSIC
+	 * MFD driver so we don't need to do it here.
+	 */
+	if (mrst_has_msic())
+		return;
+
+	/* ID as IRQ is a hack that will go away */
+	pdev = platform_device_alloc(entry->name, entry->irq);
+	if (pdev == NULL) {
+		pr_err("out of memory for SFI platform device '%s'.\n",
+			entry->name);
+		return;
+	}
+	install_irq_resource(pdev, entry->irq);
+
 	pdev->dev.platform_data = pdata;
 	intel_scu_device_register(pdev);
 }
@@ -668,7 +863,6 @@ static int __init sfi_parse_devs(struct sfi_table_header *table)
 	struct sfi_device_table_entry *pentry;
 	struct spi_board_info spi_info;
 	struct i2c_board_info i2c_info;
-	struct platform_device *pdev;
 	int num, i, bus;
 	int ioapic;
 	struct io_apic_irq_attr irq_attr;
@@ -678,36 +872,32 @@ static int __init sfi_parse_devs(struct sfi_table_header *table)
 	pentry = (struct sfi_device_table_entry *)sb->pentry;
 
 	for (i = 0; i < num; i++, pentry++) {
-		if (pentry->irq != (u8)0xff) { /* native RTE case */
+		int irq = pentry->irq;
+
+		if (irq != (u8)0xff) { /* native RTE case */
 			/* these SPI2 devices are not exposed to system as PCI
 			 * devices, but they have separate RTE entry in IOAPIC
 			 * so we have to enable them one by one here
 			 */
-			ioapic = mp_find_ioapic(pentry->irq);
+			ioapic = mp_find_ioapic(irq);
 			irq_attr.ioapic = ioapic;
-			irq_attr.ioapic_pin = pentry->irq;
+			irq_attr.ioapic_pin = irq;
 			irq_attr.trigger = 1;
 			irq_attr.polarity = 1;
-			io_apic_set_pci_routing(NULL, pentry->irq, &irq_attr);
-		}
+			io_apic_set_pci_routing(NULL, irq, &irq_attr);
+		} else
+			irq = 0; /* No irq */
+
 		switch (pentry->type) {
 		case SFI_DEV_TYPE_IPC:
-			/* ID as IRQ is a hack that will go away */
-			pdev = platform_device_alloc(pentry->name, pentry->irq);
-			if (pdev == NULL) {
-				pr_err("out of memory for SFI platform device '%s'.\n",
-							pentry->name);
-				continue;
-			}
-			install_irq_resource(pdev, pentry->irq);
 			pr_debug("info[%2d]: IPC bus, name = %16.16s, "
 				"irq = 0x%2x\n", i, pentry->name, pentry->irq);
-			sfi_handle_ipc_dev(pdev);
+			sfi_handle_ipc_dev(pentry);
 			break;
 		case SFI_DEV_TYPE_SPI:
 			memset(&spi_info, 0, sizeof(spi_info));
 			strncpy(spi_info.modalias, pentry->name, SFI_NAME_LEN);
-			spi_info.irq = pentry->irq;
+			spi_info.irq = irq;
 			spi_info.bus_num = pentry->host_num;
 			spi_info.chip_select = pentry->addr;
 			spi_info.max_speed_hz = pentry->max_freq;
@@ -724,7 +914,7 @@ static int __init sfi_parse_devs(struct sfi_table_header *table)
 			memset(&i2c_info, 0, sizeof(i2c_info));
 			bus = pentry->host_num;
 			strncpy(i2c_info.type, pentry->name, SFI_NAME_LEN);
-			i2c_info.irq = pentry->irq;
+			i2c_info.irq = irq;
 			i2c_info.addr = pentry->addr;
 			pr_debug("info[%2d]: I2C bus = %d, name = %16.16s, "
 				"irq = 0x%2x, addr = 0x%x\n", i, bus,
diff --git a/arch/x86/platform/mrst/pmu.c b/arch/x86/platform/mrst/pmu.c
new file mode 100644
index 00000000000..c0ac06da57a
--- /dev/null
+++ b/arch/x86/platform/mrst/pmu.c
@@ -0,0 +1,817 @@
+/*
+ * mrst/pmu.c - driver for MRST Power Management Unit
+ *
+ * Copyright (c) 2011, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include <linux/cpuidle.h>
+#include <linux/debugfs.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/seq_file.h>
+#include <linux/sfi.h>
+#include <asm/intel_scu_ipc.h>
+#include "pmu.h"
+
+#define IPCMSG_FW_REVISION	0xF4
+
+struct mrst_device {
+	u16 pci_dev_num;	/* DEBUG only */
+	u16 lss;
+	u16 latest_request;
+	unsigned int pci_state_counts[PCI_D3cold + 1]; /* DEBUG only */
+};
+
+/*
+ * comlete list of MRST PCI devices
+ */
+static struct mrst_device mrst_devs[] = {
+/*  0 */ { 0x0800, LSS_SPI0 },		/* Moorestown SPI Ctrl 0 */
+/*  1 */ { 0x0801, LSS_SPI1 },		/* Moorestown SPI Ctrl 1 */
+/*  2 */ { 0x0802, LSS_I2C0 },		/* Moorestown I2C 0 */
+/*  3 */ { 0x0803, LSS_I2C1 },		/* Moorestown I2C 1 */
+/*  4 */ { 0x0804, LSS_I2C2 },		/* Moorestown I2C 2 */
+/*  5 */ { 0x0805, LSS_KBD },		/* Moorestown Keyboard Ctrl */
+/*  6 */ { 0x0806, LSS_USB_HC },	/* Moorestown USB Ctrl */
+/*  7 */ { 0x0807, LSS_SD_HC0 },	/* Moorestown SD Host Ctrl 0 */
+/*  8 */ { 0x0808, LSS_SD_HC1 },	/* Moorestown SD Host Ctrl 1 */
+/*  9 */ { 0x0809, LSS_NAND },		/* Moorestown NAND Ctrl */
+/* 10 */ { 0x080a, LSS_AUDIO },		/* Moorestown Audio Ctrl */
+/* 11 */ { 0x080b, LSS_IMAGING },	/* Moorestown ISP */
+/* 12 */ { 0x080c, LSS_SECURITY },	/* Moorestown Security Controller */
+/* 13 */ { 0x080d, LSS_DISPLAY },	/* Moorestown External Displays */
+/* 14 */ { 0x080e, 0 },			/* Moorestown SCU IPC */
+/* 15 */ { 0x080f, LSS_GPIO },		/* Moorestown GPIO Controller */
+/* 16 */ { 0x0810, 0 },			/* Moorestown Power Management Unit */
+/* 17 */ { 0x0811, LSS_USB_OTG },	/* Moorestown OTG Ctrl */
+/* 18 */ { 0x0812, LSS_SPI2 },		/* Moorestown SPI Ctrl 2 */
+/* 19 */ { 0x0813, 0 },			/* Moorestown SC DMA */
+/* 20 */ { 0x0814, LSS_AUDIO_LPE },	/* Moorestown LPE DMA */
+/* 21 */ { 0x0815, LSS_AUDIO_SSP },	/* Moorestown SSP0 */
+
+/* 22 */ { 0x084F, LSS_SD_HC2 },	/* Moorestown SD Host Ctrl 2 */
+
+/* 23 */ { 0x4102, 0 },			/* Lincroft */
+/* 24 */ { 0x4110, 0 },			/* Lincroft */
+};
+
+/* n.b. We ignore PCI-id 0x815 in LSS9 b/c Linux has no driver for it */
+static u16 mrst_lss9_pci_ids[] = {0x080a, 0x0814, 0};
+static u16 mrst_lss10_pci_ids[] = {0x0800, 0x0801, 0x0802, 0x0803,
+					0x0804, 0x0805, 0x080f, 0};
+
+/* handle concurrent SMP invokations of pmu_pci_set_power_state() */
+static spinlock_t mrst_pmu_power_state_lock;
+
+static unsigned int wake_counters[MRST_NUM_LSS];	/* DEBUG only */
+static unsigned int pmu_irq_stats[INT_INVALID + 1];	/* DEBUG only */
+
+static int graphics_is_off;
+static int lss_s0i3_enabled;
+static bool mrst_pmu_s0i3_enable;
+
+/*  debug counters */
+static u32 pmu_wait_ready_calls;
+static u32 pmu_wait_ready_udelays;
+static u32 pmu_wait_ready_udelays_max;
+static u32 pmu_wait_done_calls;
+static u32 pmu_wait_done_udelays;
+static u32 pmu_wait_done_udelays_max;
+static u32 pmu_set_power_state_entry;
+static u32 pmu_set_power_state_send_cmd;
+
+static struct mrst_device *pci_id_2_mrst_dev(u16 pci_dev_num)
+{
+	int index = 0;
+
+	if ((pci_dev_num >= 0x0800) && (pci_dev_num <= 0x815))
+		index = pci_dev_num - 0x800;
+	else if (pci_dev_num == 0x084F)
+		index = 22;
+	else if (pci_dev_num == 0x4102)
+		index = 23;
+	else if (pci_dev_num == 0x4110)
+		index = 24;
+
+	if (pci_dev_num != mrst_devs[index].pci_dev_num) {
+		WARN_ONCE(1, FW_BUG "Unknown PCI device 0x%04X\n", pci_dev_num);
+		return 0;
+	}
+
+	return &mrst_devs[index];
+}
+
+/**
+ * mrst_pmu_validate_cstates
+ * @dev: cpuidle_device
+ *
+ * Certain states are not appropriate for governor to pick in some cases.
+ * This function will be called as cpuidle_device's prepare callback and
+ * thus tells governor to ignore such states when selecting the next state
+ * to enter.
+ */
+
+#define IDLE_STATE4_IS_C6	4
+#define IDLE_STATE5_IS_S0I3	5
+
+int mrst_pmu_invalid_cstates(void)
+{
+	int cpu = smp_processor_id();
+
+	/*
+	 * Demote to C4 if the PMU is busy.
+	 * Since LSS changes leave the busy bit clear...
+	 * busy means either the PMU is waiting for an ACK-C6 that
+	 * isn't coming due to an MWAIT that returned immediately;
+	 * or we returned from S0i3 successfully, and the PMU
+	 * is not done sending us interrupts.
+	 */
+	if (pmu_read_busy_status())
+		return 1 << IDLE_STATE4_IS_C6 | 1 << IDLE_STATE5_IS_S0I3;
+
+	/*
+	 * Disallow S0i3 if: PMU is not initialized, or CPU1 is active,
+	 * or if device LSS is insufficient, or the GPU is active,
+	 * or if it has been explicitly disabled.
+	 */
+	if (!pmu_reg || !cpumask_equal(cpu_online_mask, cpumask_of(cpu)) ||
+	    !lss_s0i3_enabled || !graphics_is_off || !mrst_pmu_s0i3_enable)
+		return 1 << IDLE_STATE5_IS_S0I3;
+	else
+		return 0;
+}
+
+/*
+ * pmu_update_wake_counters(): read PM_WKS, update wake_counters[]
+ * DEBUG only.
+ */
+static void pmu_update_wake_counters(void)
+{
+	int lss;
+	u32 wake_status;
+
+	wake_status = pmu_read_wks();
+
+	for (lss = 0; lss < MRST_NUM_LSS; ++lss) {
+		if (wake_status & (1 << lss))
+			wake_counters[lss]++;
+	}
+}
+
+int mrst_pmu_s0i3_entry(void)
+{
+	int status;
+
+	/* Clear any possible error conditions */
+	pmu_write_ics(0x300);
+
+	/* set wake control to current D-states */
+	pmu_write_wssc(S0I3_SSS_TARGET);
+
+	status = mrst_s0i3_entry(PM_S0I3_COMMAND, &pmu_reg->pm_cmd);
+	pmu_update_wake_counters();
+	return status;
+}
+
+/* poll for maximum of 5ms for busy bit to clear */
+static int pmu_wait_ready(void)
+{
+	int udelays;
+
+	pmu_wait_ready_calls++;
+
+	for (udelays = 0; udelays < 500; ++udelays) {
+		if (udelays > pmu_wait_ready_udelays_max)
+			pmu_wait_ready_udelays_max = udelays;
+
+		if (pmu_read_busy_status() == 0)
+			return 0;
+
+		udelay(10);
+		pmu_wait_ready_udelays++;
+	}
+
+	/*
+	 * if this fires, observe
+	 * /sys/kernel/debug/mrst_pmu_wait_ready_calls
+	 * /sys/kernel/debug/mrst_pmu_wait_ready_udelays
+	 */
+	WARN_ONCE(1, "SCU not ready for 5ms");
+	return -EBUSY;
+}
+/* poll for maximum of 50ms us for busy bit to clear */
+static int pmu_wait_done(void)
+{
+	int udelays;
+
+	pmu_wait_done_calls++;
+
+	for (udelays = 0; udelays < 500; ++udelays) {
+		if (udelays > pmu_wait_done_udelays_max)
+			pmu_wait_done_udelays_max = udelays;
+
+		if (pmu_read_busy_status() == 0)
+			return 0;
+
+		udelay(100);
+		pmu_wait_done_udelays++;
+	}
+
+	/*
+	 * if this fires, observe
+	 * /sys/kernel/debug/mrst_pmu_wait_done_calls
+	 * /sys/kernel/debug/mrst_pmu_wait_done_udelays
+	 */
+	WARN_ONCE(1, "SCU not done for 50ms");
+	return -EBUSY;
+}
+
+u32 mrst_pmu_msi_is_disabled(void)
+{
+	return pmu_msi_is_disabled();
+}
+
+void mrst_pmu_enable_msi(void)
+{
+	pmu_msi_enable();
+}
+
+/**
+ * pmu_irq - pmu driver interrupt handler
+ * Context: interrupt context
+ */
+static irqreturn_t pmu_irq(int irq, void *dummy)
+{
+	union pmu_pm_ics pmu_ics;
+
+	pmu_ics.value = pmu_read_ics();
+
+	if (!pmu_ics.bits.pending)
+		return IRQ_NONE;
+
+	switch (pmu_ics.bits.cause) {
+	case INT_SPURIOUS:
+	case INT_CMD_DONE:
+	case INT_CMD_ERR:
+	case INT_WAKE_RX:
+	case INT_SS_ERROR:
+	case INT_S0IX_MISS:
+	case INT_NO_ACKC6:
+		pmu_irq_stats[pmu_ics.bits.cause]++;
+		break;
+	default:
+		pmu_irq_stats[INT_INVALID]++;
+	}
+
+	pmu_write_ics(pmu_ics.value); /* Clear pending interrupt */
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * Translate PCI power management to MRST LSS D-states
+ */
+static int pci_2_mrst_state(int lss, pci_power_t pci_state)
+{
+	switch (pci_state) {
+	case PCI_D0:
+		if (SSMSK(D0i1, lss) & D0I1_ACG_SSS_TARGET)
+			return D0i1;
+		else
+			return D0;
+	case PCI_D1:
+		return D0i1;
+	case PCI_D2:
+		return D0i2;
+	case PCI_D3hot:
+	case PCI_D3cold:
+		return D0i3;
+	default:
+		WARN(1, "pci_state %d\n", pci_state);
+		return 0;
+	}
+}
+
+static int pmu_issue_command(u32 pm_ssc)
+{
+	union pmu_pm_set_cfg_cmd_t command;
+
+	if (pmu_read_busy_status()) {
+		pr_debug("pmu is busy, Operation not permitted\n");
+		return -1;
+	}
+
+	/*
+	 * enable interrupts in PMU so that interrupts are
+	 * propagated when ioc bit for a particular set
+	 * command is set
+	 */
+
+	pmu_irq_enable();
+
+	/* Configure the sub systems for pmu2 */
+
+	pmu_write_ssc(pm_ssc);
+
+	/*
+	 * Send the set config command for pmu its configured
+	 * for mode CM_IMMEDIATE & hence with No Trigger
+	 */
+
+	command.pmu2_params.d_param.cfg_mode = CM_IMMEDIATE;
+	command.pmu2_params.d_param.cfg_delay = 0;
+	command.pmu2_params.d_param.rsvd = 0;
+
+	/* construct the command to send SET_CFG to particular PMU */
+	command.pmu2_params.d_param.cmd = SET_CFG_CMD;
+	command.pmu2_params.d_param.ioc = 0;
+	command.pmu2_params.d_param.mode_id = 0;
+	command.pmu2_params.d_param.sys_state = SYS_STATE_S0I0;
+
+	/* write the value of PM_CMD into particular PMU */
+	pr_debug("pmu command being written %x\n",
+			command.pmu_pm_set_cfg_cmd_value);
+
+	pmu_write_cmd(command.pmu_pm_set_cfg_cmd_value);
+
+	return 0;
+}
+
+static u16 pmu_min_lss_pci_req(u16 *ids, u16 pci_state)
+{
+	u16 existing_request;
+	int i;
+
+	for (i = 0; ids[i]; ++i) {
+		struct mrst_device *mrst_dev;
+
+		mrst_dev = pci_id_2_mrst_dev(ids[i]);
+		if (unlikely(!mrst_dev))
+			continue;
+
+		existing_request = mrst_dev->latest_request;
+		if (existing_request < pci_state)
+			pci_state = existing_request;
+	}
+	return pci_state;
+}
+
+/**
+ * pmu_pci_set_power_state - Callback function is used by all the PCI devices
+ *			for a platform  specific device power on/shutdown.
+ */
+
+int pmu_pci_set_power_state(struct pci_dev *pdev, pci_power_t pci_state)
+{
+	u32 old_sss, new_sss;
+	int status = 0;
+	struct mrst_device *mrst_dev;
+
+	pmu_set_power_state_entry++;
+
+	BUG_ON(pdev->vendor != PCI_VENDOR_ID_INTEL);
+	BUG_ON(pci_state < PCI_D0 || pci_state > PCI_D3cold);
+
+	mrst_dev = pci_id_2_mrst_dev(pdev->device);
+	if (unlikely(!mrst_dev))
+		return -ENODEV;
+
+	mrst_dev->pci_state_counts[pci_state]++;	/* count invocations */
+
+	/* PMU driver calls self as part of PCI initialization, ignore */
+	if (pdev->device == PCI_DEV_ID_MRST_PMU)
+		return 0;
+
+	BUG_ON(!pmu_reg); /* SW bug if called before initialized */
+
+	spin_lock(&mrst_pmu_power_state_lock);
+
+	if (pdev->d3_delay) {
+		dev_dbg(&pdev->dev, "d3_delay %d, should be 0\n",
+			pdev->d3_delay);
+		pdev->d3_delay = 0;
+	}
+	/*
+	 * If Lincroft graphics, simply remember state
+	 */
+	if ((pdev->class >> 16) == PCI_BASE_CLASS_DISPLAY
+		&& !((pdev->class & PCI_SUB_CLASS_MASK) >> 8)) {
+		if (pci_state == PCI_D0)
+			graphics_is_off = 0;
+		else
+			graphics_is_off = 1;
+		goto ret;
+	}
+
+	if (!mrst_dev->lss)
+		goto ret;	/* device with no LSS */
+
+	if (mrst_dev->latest_request == pci_state)
+		goto ret;	/* no change */
+
+	mrst_dev->latest_request = pci_state;	/* record latest request */
+
+	/*
+	 * LSS9 and LSS10 contain multiple PCI devices.
+	 * Use the lowest numbered (highest power) state in the LSS
+	 */
+	if (mrst_dev->lss == 9)
+		pci_state = pmu_min_lss_pci_req(mrst_lss9_pci_ids, pci_state);
+	else if (mrst_dev->lss == 10)
+		pci_state = pmu_min_lss_pci_req(mrst_lss10_pci_ids, pci_state);
+
+	status = pmu_wait_ready();
+	if (status)
+		goto ret;
+
+	old_sss = pmu_read_sss();
+	new_sss = old_sss & ~SSMSK(3, mrst_dev->lss);
+	new_sss |= SSMSK(pci_2_mrst_state(mrst_dev->lss, pci_state),
+			mrst_dev->lss);
+
+	if (new_sss == old_sss)
+		goto ret;	/* nothing to do */
+
+	pmu_set_power_state_send_cmd++;
+
+	status = pmu_issue_command(new_sss);
+
+	if (unlikely(status != 0)) {
+		dev_err(&pdev->dev, "Failed to Issue a PM command\n");
+		goto ret;
+	}
+
+	if (pmu_wait_done())
+		goto ret;
+
+	lss_s0i3_enabled =
+	((pmu_read_sss() & S0I3_SSS_TARGET) == S0I3_SSS_TARGET);
+ret:
+	spin_unlock(&mrst_pmu_power_state_lock);
+	return status;
+}
+
+#ifdef CONFIG_DEBUG_FS
+static char *d0ix_names[] = {"D0", "D0i1", "D0i2", "D0i3"};
+
+static inline const char *d0ix_name(int state)
+{
+	return d0ix_names[(int) state];
+}
+
+static int debug_mrst_pmu_show(struct seq_file *s, void *unused)
+{
+	struct pci_dev *pdev = NULL;
+	u32 cur_pmsss;
+	int lss;
+
+	seq_printf(s, "0x%08X D0I1_ACG_SSS_TARGET\n", D0I1_ACG_SSS_TARGET);
+
+	cur_pmsss = pmu_read_sss();
+
+	seq_printf(s, "0x%08X S0I3_SSS_TARGET\n", S0I3_SSS_TARGET);
+
+	seq_printf(s, "0x%08X Current SSS ", cur_pmsss);
+	seq_printf(s, lss_s0i3_enabled ? "\n" : "[BLOCKS s0i3]\n");
+
+	if (cpumask_equal(cpu_online_mask, cpumask_of(0)))
+		seq_printf(s, "cpu0 is only cpu online\n");
+	else
+		seq_printf(s, "cpu0 is NOT only cpu online [BLOCKS S0i3]\n");
+
+	seq_printf(s, "GFX: %s\n", graphics_is_off ? "" : "[BLOCKS s0i3]");
+
+
+	for_each_pci_dev(pdev) {
+		int pos;
+		u16 pmcsr;
+		struct mrst_device *mrst_dev;
+		int i;
+
+		mrst_dev = pci_id_2_mrst_dev(pdev->device);
+
+		seq_printf(s, "%s %04x/%04X %-16.16s ",
+			dev_name(&pdev->dev),
+			pdev->vendor, pdev->device,
+			dev_driver_string(&pdev->dev));
+
+		if (unlikely (!mrst_dev)) {
+			seq_printf(s, " UNKNOWN\n");
+			continue;
+		}
+
+		if (mrst_dev->lss)
+			seq_printf(s, "LSS %2d %-4s ", mrst_dev->lss,
+				d0ix_name(((cur_pmsss >>
+					(mrst_dev->lss * 2)) & 0x3)));
+		else
+			seq_printf(s, "            ");
+
+		/* PCI PM config space setting */
+		pos = pci_find_capability(pdev, PCI_CAP_ID_PM);
+		if (pos != 0) {
+			pci_read_config_word(pdev, pos + PCI_PM_CTRL, &pmcsr);
+		seq_printf(s, "PCI-%-4s",
+			pci_power_name(pmcsr & PCI_PM_CTRL_STATE_MASK));
+		} else {
+			seq_printf(s, "        ");
+		}
+
+		seq_printf(s, " %s ", pci_power_name(mrst_dev->latest_request));
+		for (i = 0; i <= PCI_D3cold; ++i)
+			seq_printf(s, "%d ", mrst_dev->pci_state_counts[i]);
+
+		if (mrst_dev->lss) {
+			unsigned int lssmask;
+
+			lssmask = SSMSK(D0i3, mrst_dev->lss);
+
+			if ((lssmask & S0I3_SSS_TARGET) &&
+				((lssmask & cur_pmsss) !=
+					(lssmask & S0I3_SSS_TARGET)))
+						seq_printf(s , "[BLOCKS s0i3]");
+		}
+
+		seq_printf(s, "\n");
+	}
+	seq_printf(s, "Wake Counters:\n");
+	for (lss = 0; lss < MRST_NUM_LSS; ++lss)
+		seq_printf(s, "LSS%d %d\n", lss, wake_counters[lss]);
+
+	seq_printf(s, "Interrupt Counters:\n");
+	seq_printf(s,
+		"INT_SPURIOUS \t%8u\n" "INT_CMD_DONE \t%8u\n"
+		"INT_CMD_ERR  \t%8u\n" "INT_WAKE_RX  \t%8u\n"
+		"INT_SS_ERROR \t%8u\n" "INT_S0IX_MISS\t%8u\n"
+		"INT_NO_ACKC6 \t%8u\n" "INT_INVALID  \t%8u\n",
+		pmu_irq_stats[INT_SPURIOUS], pmu_irq_stats[INT_CMD_DONE],
+		pmu_irq_stats[INT_CMD_ERR], pmu_irq_stats[INT_WAKE_RX],
+		pmu_irq_stats[INT_SS_ERROR], pmu_irq_stats[INT_S0IX_MISS],
+		pmu_irq_stats[INT_NO_ACKC6], pmu_irq_stats[INT_INVALID]);
+
+	seq_printf(s, "mrst_pmu_wait_ready_calls          %8d\n",
+			pmu_wait_ready_calls);
+	seq_printf(s, "mrst_pmu_wait_ready_udelays        %8d\n",
+			pmu_wait_ready_udelays);
+	seq_printf(s, "mrst_pmu_wait_ready_udelays_max    %8d\n",
+			pmu_wait_ready_udelays_max);
+	seq_printf(s, "mrst_pmu_wait_done_calls           %8d\n",
+			pmu_wait_done_calls);
+	seq_printf(s, "mrst_pmu_wait_done_udelays         %8d\n",
+			pmu_wait_done_udelays);
+	seq_printf(s, "mrst_pmu_wait_done_udelays_max     %8d\n",
+			pmu_wait_done_udelays_max);
+	seq_printf(s, "mrst_pmu_set_power_state_entry     %8d\n",
+			pmu_set_power_state_entry);
+	seq_printf(s, "mrst_pmu_set_power_state_send_cmd  %8d\n",
+			pmu_set_power_state_send_cmd);
+	seq_printf(s, "SCU busy: %d\n", pmu_read_busy_status());
+
+	return 0;
+}
+
+static int debug_mrst_pmu_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, debug_mrst_pmu_show, NULL);
+}
+
+static const struct file_operations devices_state_operations = {
+	.open		= debug_mrst_pmu_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+#endif	/* DEBUG_FS */
+
+/*
+ * Validate SCU PCI shim PCI vendor capability byte
+ * against LSS hard-coded in mrst_devs[] above.
+ * DEBUG only.
+ */
+static void pmu_scu_firmware_debug(void)
+{
+	struct pci_dev *pdev = NULL;
+
+	for_each_pci_dev(pdev) {
+		struct mrst_device *mrst_dev;
+		u8 pci_config_lss;
+		int pos;
+
+		mrst_dev = pci_id_2_mrst_dev(pdev->device);
+		if (unlikely(!mrst_dev)) {
+			printk(KERN_ERR FW_BUG "pmu: Unknown "
+				"PCI device 0x%04X\n", pdev->device);
+			continue;
+		}
+
+		if (mrst_dev->lss == 0)
+			continue;	 /* no LSS in our table */
+
+		pos = pci_find_capability(pdev, PCI_CAP_ID_VNDR);
+		if (!pos != 0) {
+			printk(KERN_ERR FW_BUG "pmu: 0x%04X "
+				"missing PCI Vendor Capability\n",
+				pdev->device);
+			continue;
+		}
+		pci_read_config_byte(pdev, pos + 4, &pci_config_lss);
+		if (!(pci_config_lss & PCI_VENDOR_CAP_LOG_SS_MASK)) {
+			printk(KERN_ERR FW_BUG "pmu: 0x%04X "
+				"invalid PCI Vendor Capability 0x%x "
+				" expected LSS 0x%X\n",
+				pdev->device, pci_config_lss, mrst_dev->lss);
+			continue;
+		}
+		pci_config_lss &= PCI_VENDOR_CAP_LOG_ID_MASK;
+
+		if (mrst_dev->lss == pci_config_lss)
+			continue;
+
+		printk(KERN_ERR FW_BUG "pmu: 0x%04X LSS = %d, expected %d\n",
+			pdev->device, pci_config_lss, mrst_dev->lss);
+	}
+}
+
+/**
+ * pmu_probe
+ */
+static int __devinit pmu_probe(struct pci_dev *pdev,
+				   const struct pci_device_id *pci_id)
+{
+	int ret;
+	struct mrst_pmu_reg *pmu;
+
+	/* Init the device */
+	ret = pci_enable_device(pdev);
+	if (ret) {
+		dev_err(&pdev->dev, "Unable to Enable PCI device\n");
+		return ret;
+	}
+
+	ret = pci_request_regions(pdev, MRST_PMU_DRV_NAME);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Cannot obtain PCI resources, aborting\n");
+		goto out_err1;
+	}
+
+	/* Map the memory of PMU reg base */
+	pmu = pci_iomap(pdev, 0, 0);
+	if (!pmu) {
+		dev_err(&pdev->dev, "Unable to map the PMU address space\n");
+		ret = -ENOMEM;
+		goto out_err2;
+	}
+
+#ifdef CONFIG_DEBUG_FS
+	/* /sys/kernel/debug/mrst_pmu */
+	(void) debugfs_create_file("mrst_pmu", S_IFREG | S_IRUGO,
+				NULL, NULL, &devices_state_operations);
+#endif
+	pmu_reg = pmu;	/* success */
+
+	if (request_irq(pdev->irq, pmu_irq, 0, MRST_PMU_DRV_NAME, NULL)) {
+		dev_err(&pdev->dev, "Registering isr has failed\n");
+		ret = -1;
+		goto out_err3;
+	}
+
+	pmu_scu_firmware_debug();
+
+	pmu_write_wkc(S0I3_WAKE_SOURCES);	/* Enable S0i3 wakeup sources */
+
+	pmu_wait_ready();
+
+	pmu_write_ssc(D0I1_ACG_SSS_TARGET);	/* Enable Auto-Clock_Gating */
+	pmu_write_cmd(0x201);
+
+	spin_lock_init(&mrst_pmu_power_state_lock);
+
+	/* Enable the hardware interrupt */
+	pmu_irq_enable();
+	return 0;
+
+out_err3:
+	free_irq(pdev->irq, NULL);
+	pci_iounmap(pdev, pmu_reg);
+	pmu_reg = NULL;
+out_err2:
+	pci_release_region(pdev, 0);
+out_err1:
+	pci_disable_device(pdev);
+	return ret;
+}
+
+static void __devexit pmu_remove(struct pci_dev *pdev)
+{
+	dev_err(&pdev->dev, "Mid PM pmu_remove called\n");
+
+	/* Freeing up the irq */
+	free_irq(pdev->irq, NULL);
+
+	pci_iounmap(pdev, pmu_reg);
+	pmu_reg = NULL;
+
+	/* disable the current PCI device */
+	pci_release_region(pdev, 0);
+	pci_disable_device(pdev);
+}
+
+static DEFINE_PCI_DEVICE_TABLE(pmu_pci_ids) = {
+	{ PCI_VDEVICE(INTEL, PCI_DEV_ID_MRST_PMU), 0 },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(pci, pmu_pci_ids);
+
+static struct pci_driver driver = {
+	.name = MRST_PMU_DRV_NAME,
+	.id_table = pmu_pci_ids,
+	.probe = pmu_probe,
+	.remove = __devexit_p(pmu_remove),
+};
+
+/**
+ * pmu_pci_register - register the PMU driver as PCI device
+ */
+static int __init pmu_pci_register(void)
+{
+	return pci_register_driver(&driver);
+}
+
+/* Register and probe via fs_initcall() to preceed device_initcall() */
+fs_initcall(pmu_pci_register);
+
+static void __exit mid_pci_cleanup(void)
+{
+	pci_unregister_driver(&driver);
+}
+
+static int ia_major;
+static int ia_minor;
+
+static int pmu_sfi_parse_oem(struct sfi_table_header *table)
+{
+	struct sfi_table_simple *sb;
+
+	sb = (struct sfi_table_simple *)table;
+	ia_major = (sb->pentry[1] >> 0) & 0xFFFF;
+	ia_minor = (sb->pentry[1] >> 16) & 0xFFFF;
+	printk(KERN_INFO "mrst_pmu: IA FW version v%x.%x\n",
+		ia_major, ia_minor);
+
+	return 0;
+}
+
+static int __init scu_fw_check(void)
+{
+	int ret;
+	u32 fw_version;
+
+	if (!pmu_reg)
+		return 0;	/* this driver didn't probe-out */
+
+	sfi_table_parse("OEMB", NULL, NULL, pmu_sfi_parse_oem);
+
+	if (ia_major < 0x6005 || ia_minor < 0x1525) {
+		WARN(1, "mrst_pmu: IA FW version too old\n");
+		return -1;
+	}
+
+	ret = intel_scu_ipc_command(IPCMSG_FW_REVISION, 0, NULL, 0,
+					&fw_version, 1);
+
+	if (ret) {
+		WARN(1, "mrst_pmu: IPC FW version? %d\n", ret);
+	} else {
+		int scu_major = (fw_version >> 8) & 0xFF;
+		int scu_minor = (fw_version >> 0) & 0xFF;
+
+		printk(KERN_INFO "mrst_pmu: firmware v%x\n", fw_version);
+
+		if ((scu_major >= 0xC0) && (scu_minor >= 0x49)) {
+			printk(KERN_INFO "mrst_pmu: enabling S0i3\n");
+			mrst_pmu_s0i3_enable = true;
+		} else {
+			WARN(1, "mrst_pmu: S0i3 disabled, old firmware %X.%X",
+					scu_major, scu_minor);
+		}
+	}
+	return 0;
+}
+late_initcall(scu_fw_check);
+module_exit(mid_pci_cleanup);
diff --git a/arch/x86/platform/mrst/pmu.h b/arch/x86/platform/mrst/pmu.h
new file mode 100644
index 00000000000..bfbfe64b167
--- /dev/null
+++ b/arch/x86/platform/mrst/pmu.h
@@ -0,0 +1,234 @@
+/*
+ * mrst/pmu.h - private definitions for MRST Power Management Unit mrst/pmu.c
+ *
+ * Copyright (c) 2011, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#ifndef _MRST_PMU_H_
+#define _MRST_PMU_H_
+
+#define PCI_DEV_ID_MRST_PMU		0x0810
+#define MRST_PMU_DRV_NAME		"mrst_pmu"
+#define	PCI_SUB_CLASS_MASK		0xFF00
+
+#define	PCI_VENDOR_CAP_LOG_ID_MASK	0x7F
+#define PCI_VENDOR_CAP_LOG_SS_MASK	0x80
+
+#define SUB_SYS_ALL_D0I1	0x01155555
+#define S0I3_WAKE_SOURCES	0x00001FFF
+
+#define PM_S0I3_COMMAND					\
+	((0 << 31) |	/* Reserved */			\
+	(0 << 30) |	/* Core must be idle */		\
+	(0xc2 << 22) |	/* ACK C6 trigger */		\
+	(3 << 19) |	/* Trigger on DMI message */	\
+	(3 << 16) |	/* Enter S0i3 */		\
+	(0 << 13) |	/* Numeric mode ID (sw) */	\
+	(3 << 9) |	/* Trigger mode */		\
+	(0 << 8) |	/* Do not interrupt */		\
+	(1 << 0))	/* Set configuration */
+
+#define	LSS_DMI		0
+#define	LSS_SD_HC0	1
+#define	LSS_SD_HC1	2
+#define	LSS_NAND	3
+#define	LSS_IMAGING	4
+#define	LSS_SECURITY	5
+#define	LSS_DISPLAY	6
+#define	LSS_USB_HC	7
+#define	LSS_USB_OTG	8
+#define	LSS_AUDIO	9
+#define	LSS_AUDIO_LPE	9
+#define	LSS_AUDIO_SSP	9
+#define	LSS_I2C0	10
+#define	LSS_I2C1	10
+#define	LSS_I2C2	10
+#define	LSS_KBD		10
+#define	LSS_SPI0	10
+#define	LSS_SPI1	10
+#define	LSS_SPI2	10
+#define	LSS_GPIO	10
+#define	LSS_SRAM	11	/* used by SCU, do not touch */
+#define	LSS_SD_HC2	12
+/* LSS hardware bits 15,14,13 are hardwired to 0, thus unusable */
+#define MRST_NUM_LSS	13
+
+#define MIN(a, b) (((a) < (b)) ? (a) : (b))
+
+#define	SSMSK(mask, lss) ((mask) << ((lss) * 2))
+#define	D0	0
+#define	D0i1	1
+#define	D0i2	2
+#define	D0i3	3
+
+#define S0I3_SSS_TARGET	(		\
+	SSMSK(D0i1, LSS_DMI) |		\
+	SSMSK(D0i3, LSS_SD_HC0) |	\
+	SSMSK(D0i3, LSS_SD_HC1) |	\
+	SSMSK(D0i3, LSS_NAND) |		\
+	SSMSK(D0i3, LSS_SD_HC2) |	\
+	SSMSK(D0i3, LSS_IMAGING) |	\
+	SSMSK(D0i3, LSS_SECURITY) |	\
+	SSMSK(D0i3, LSS_DISPLAY) |	\
+	SSMSK(D0i3, LSS_USB_HC) |	\
+	SSMSK(D0i3, LSS_USB_OTG) |	\
+	SSMSK(D0i3, LSS_AUDIO) |	\
+	SSMSK(D0i1, LSS_I2C0))
+
+/*
+ * D0i1 on Langwell is Autonomous Clock Gating (ACG).
+ * Enable ACG on every LSS except camera and audio
+ */
+#define D0I1_ACG_SSS_TARGET	 \
+	(SUB_SYS_ALL_D0I1 & ~SSMSK(D0i1, LSS_IMAGING) & ~SSMSK(D0i1, LSS_AUDIO))
+
+enum cm_mode {
+	CM_NOP,			/* ignore the config mode value */
+	CM_IMMEDIATE,
+	CM_DELAY,
+	CM_TRIGGER,
+	CM_INVALID
+};
+
+enum sys_state {
+	SYS_STATE_S0I0,
+	SYS_STATE_S0I1,
+	SYS_STATE_S0I2,
+	SYS_STATE_S0I3,
+	SYS_STATE_S3,
+	SYS_STATE_S5
+};
+
+#define SET_CFG_CMD	1
+
+enum int_status {
+	INT_SPURIOUS = 0,
+	INT_CMD_DONE = 1,
+	INT_CMD_ERR = 2,
+	INT_WAKE_RX = 3,
+	INT_SS_ERROR = 4,
+	INT_S0IX_MISS = 5,
+	INT_NO_ACKC6 = 6,
+	INT_INVALID = 7,
+};
+
+/* PMU register interface */
+static struct mrst_pmu_reg {
+	u32 pm_sts;		/* 0x00 */
+	u32 pm_cmd;		/* 0x04 */
+	u32 pm_ics;		/* 0x08 */
+	u32 _resv1;		/* 0x0C */
+	u32 pm_wkc[2];		/* 0x10 */
+	u32 pm_wks[2];		/* 0x18 */
+	u32 pm_ssc[4];		/* 0x20 */
+	u32 pm_sss[4];		/* 0x30 */
+	u32 pm_wssc[4];		/* 0x40 */
+	u32 pm_c3c4;		/* 0x50 */
+	u32 pm_c5c6;		/* 0x54 */
+	u32 pm_msi_disable;	/* 0x58 */
+} *pmu_reg;
+
+static inline u32 pmu_read_sts(void) { return readl(&pmu_reg->pm_sts); }
+static inline u32 pmu_read_ics(void) { return readl(&pmu_reg->pm_ics); }
+static inline u32 pmu_read_wks(void) { return readl(&pmu_reg->pm_wks[0]); }
+static inline u32 pmu_read_sss(void) { return readl(&pmu_reg->pm_sss[0]); }
+
+static inline void pmu_write_cmd(u32 arg) { writel(arg, &pmu_reg->pm_cmd); }
+static inline void pmu_write_ics(u32 arg) { writel(arg, &pmu_reg->pm_ics); }
+static inline void pmu_write_wkc(u32 arg) { writel(arg, &pmu_reg->pm_wkc[0]); }
+static inline void pmu_write_ssc(u32 arg) { writel(arg, &pmu_reg->pm_ssc[0]); }
+static inline void pmu_write_wssc(u32 arg)
+					{ writel(arg, &pmu_reg->pm_wssc[0]); }
+
+static inline void pmu_msi_enable(void) { writel(0, &pmu_reg->pm_msi_disable); }
+static inline u32 pmu_msi_is_disabled(void)
+				{ return readl(&pmu_reg->pm_msi_disable); }
+
+union pmu_pm_ics {
+	struct {
+		u32 cause:8;
+		u32 enable:1;
+		u32 pending:1;
+		u32 reserved:22;
+	} bits;
+	u32 value;
+};
+
+static inline void pmu_irq_enable(void)
+{
+	union pmu_pm_ics pmu_ics;
+
+	pmu_ics.value = pmu_read_ics();
+	pmu_ics.bits.enable = 1;
+	pmu_write_ics(pmu_ics.value);
+}
+
+union pmu_pm_status {
+	struct {
+		u32 pmu_rev:8;
+		u32 pmu_busy:1;
+		u32 mode_id:4;
+		u32 Reserved:19;
+	} pmu_status_parts;
+	u32 pmu_status_value;
+};
+
+static inline int pmu_read_busy_status(void)
+{
+	union pmu_pm_status result;
+
+	result.pmu_status_value = pmu_read_sts();
+
+	return result.pmu_status_parts.pmu_busy;
+}
+
+/* pmu set config parameters */
+struct cfg_delay_param_t {
+	u32 cmd:8;
+	u32 ioc:1;
+	u32 cfg_mode:4;
+	u32 mode_id:3;
+	u32 sys_state:3;
+	u32 cfg_delay:8;
+	u32 rsvd:5;
+};
+
+struct cfg_trig_param_t {
+	u32 cmd:8;
+	u32 ioc:1;
+	u32 cfg_mode:4;
+	u32 mode_id:3;
+	u32 sys_state:3;
+	u32 cfg_trig_type:3;
+	u32 cfg_trig_val:8;
+	u32 cmbi:1;
+	u32 rsvd1:1;
+};
+
+union pmu_pm_set_cfg_cmd_t {
+	union {
+		struct cfg_delay_param_t d_param;
+		struct cfg_trig_param_t t_param;
+	} pmu2_params;
+	u32 pmu_pm_set_cfg_cmd_value;
+};
+
+#ifdef FUTURE_PATCH
+extern int mrst_s0i3_entry(u32 regval, u32 *regaddr);
+#else
+static inline int mrst_s0i3_entry(u32 regval, u32 *regaddr) { return -1; }
+#endif
+#endif
diff --git a/arch/x86/platform/mrst/vrtc.c b/arch/x86/platform/mrst/vrtc.c
index 73d70d65e76..225bd0f0f67 100644
--- a/arch/x86/platform/mrst/vrtc.c
+++ b/arch/x86/platform/mrst/vrtc.c
@@ -18,6 +18,7 @@
  */
 
 #include <linux/kernel.h>
+#include <linux/export.h>
 #include <linux/init.h>
 #include <linux/sfi.h>
 #include <linux/platform_device.h>
@@ -58,8 +59,11 @@ EXPORT_SYMBOL_GPL(vrtc_cmos_write);
 unsigned long vrtc_get_time(void)
 {
 	u8 sec, min, hour, mday, mon;
+	unsigned long flags;
 	u32 year;
 
+	spin_lock_irqsave(&rtc_lock, flags);
+
 	while ((vrtc_cmos_read(RTC_FREQ_SELECT) & RTC_UIP))
 		cpu_relax();
 
@@ -70,8 +74,10 @@ unsigned long vrtc_get_time(void)
 	mon = vrtc_cmos_read(RTC_MONTH);
 	year = vrtc_cmos_read(RTC_YEAR);
 
-	/* vRTC YEAR reg contains the offset to 1960 */
-	year += 1960;
+	spin_unlock_irqrestore(&rtc_lock, flags);
+
+	/* vRTC YEAR reg contains the offset to 1972 */
+	year += 1972;
 
 	printk(KERN_INFO "vRTC: sec: %d min: %d hour: %d day: %d "
 		"mon: %d year: %d\n", sec, min, hour, mday, mon, year);
@@ -83,8 +89,10 @@ unsigned long vrtc_get_time(void)
 int vrtc_set_mmss(unsigned long nowtime)
 {
 	int real_sec, real_min;
+	unsigned long flags;
 	int vrtc_min;
 
+	spin_lock_irqsave(&rtc_lock, flags);
 	vrtc_min = vrtc_cmos_read(RTC_MINUTES);
 
 	real_sec = nowtime % 60;
@@ -95,6 +103,8 @@ int vrtc_set_mmss(unsigned long nowtime)
 
 	vrtc_cmos_write(real_sec, RTC_SECONDS);
 	vrtc_cmos_write(real_min, RTC_MINUTES);
+	spin_unlock_irqrestore(&rtc_lock, flags);
+
 	return 0;
 }
 
diff --git a/arch/x86/platform/olpc/Makefile b/arch/x86/platform/olpc/Makefile
index 81c5e2165c2..fd332c53394 100644
--- a/arch/x86/platform/olpc/Makefile
+++ b/arch/x86/platform/olpc/Makefile
@@ -1,2 +1,5 @@
 obj-$(CONFIG_OLPC)		+= olpc.o olpc_ofw.o olpc_dt.o
-obj-$(CONFIG_OLPC_XO1)		+= olpc-xo1.o
+obj-$(CONFIG_OLPC_XO1_PM)		+= olpc-xo1-pm.o xo1-wakeup.o
+obj-$(CONFIG_OLPC_XO1_RTC)	+= olpc-xo1-rtc.o
+obj-$(CONFIG_OLPC_XO1_SCI)	+= olpc-xo1-sci.o
+obj-$(CONFIG_OLPC_XO15_SCI)	+= olpc-xo15-sci.o
diff --git a/arch/x86/platform/olpc/olpc-xo1-pm.c b/arch/x86/platform/olpc/olpc-xo1-pm.c
new file mode 100644
index 00000000000..0ce8616c88a
--- /dev/null
+++ b/arch/x86/platform/olpc/olpc-xo1-pm.c
@@ -0,0 +1,216 @@
+/*
+ * Support for power management features of the OLPC XO-1 laptop
+ *
+ * Copyright (C) 2010 Andres Salomon <dilinger@queued.net>
+ * Copyright (C) 2010 One Laptop per Child
+ * Copyright (C) 2006 Red Hat, Inc.
+ * Copyright (C) 2006 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/cs5535.h>
+#include <linux/platform_device.h>
+#include <linux/export.h>
+#include <linux/pm.h>
+#include <linux/mfd/core.h>
+#include <linux/suspend.h>
+
+#include <asm/io.h>
+#include <asm/olpc.h>
+
+#define DRV_NAME "olpc-xo1-pm"
+
+static unsigned long acpi_base;
+static unsigned long pms_base;
+
+static u16 wakeup_mask = CS5536_PM_PWRBTN;
+
+static struct {
+	unsigned long address;
+	unsigned short segment;
+} ofw_bios_entry = { 0xF0000 + PAGE_OFFSET, __KERNEL_CS };
+
+/* Set bits in the wakeup mask */
+void olpc_xo1_pm_wakeup_set(u16 value)
+{
+	wakeup_mask |= value;
+}
+EXPORT_SYMBOL_GPL(olpc_xo1_pm_wakeup_set);
+
+/* Clear bits in the wakeup mask */
+void olpc_xo1_pm_wakeup_clear(u16 value)
+{
+	wakeup_mask &= ~value;
+}
+EXPORT_SYMBOL_GPL(olpc_xo1_pm_wakeup_clear);
+
+static int xo1_power_state_enter(suspend_state_t pm_state)
+{
+	unsigned long saved_sci_mask;
+	int r;
+
+	/* Only STR is supported */
+	if (pm_state != PM_SUSPEND_MEM)
+		return -EINVAL;
+
+	r = olpc_ec_cmd(EC_SET_SCI_INHIBIT, NULL, 0, NULL, 0);
+	if (r)
+		return r;
+
+	/*
+	 * Save SCI mask (this gets lost since PM1_EN is used as a mask for
+	 * wakeup events, which is not necessarily the same event set)
+	 */
+	saved_sci_mask = inl(acpi_base + CS5536_PM1_STS);
+	saved_sci_mask &= 0xffff0000;
+
+	/* Save CPU state */
+	do_olpc_suspend_lowlevel();
+
+	/* Resume path starts here */
+
+	/* Restore SCI mask (using dword access to CS5536_PM1_EN) */
+	outl(saved_sci_mask, acpi_base + CS5536_PM1_STS);
+
+	/* Tell the EC to stop inhibiting SCIs */
+	olpc_ec_cmd(EC_SET_SCI_INHIBIT_RELEASE, NULL, 0, NULL, 0);
+
+	/*
+	 * Tell the wireless module to restart USB communication.
+	 * Must be done twice.
+	 */
+	olpc_ec_cmd(EC_WAKE_UP_WLAN, NULL, 0, NULL, 0);
+	olpc_ec_cmd(EC_WAKE_UP_WLAN, NULL, 0, NULL, 0);
+
+	return 0;
+}
+
+asmlinkage int xo1_do_sleep(u8 sleep_state)
+{
+	void *pgd_addr = __va(read_cr3());
+
+	/* Program wakeup mask (using dword access to CS5536_PM1_EN) */
+	outl(wakeup_mask << 16, acpi_base + CS5536_PM1_STS);
+
+	__asm__("movl %0,%%eax" : : "r" (pgd_addr));
+	__asm__("call *(%%edi); cld"
+		: : "D" (&ofw_bios_entry));
+	__asm__("movb $0x34, %al\n\t"
+		"outb %al, $0x70\n\t"
+		"movb $0x30, %al\n\t"
+		"outb %al, $0x71\n\t");
+	return 0;
+}
+
+static void xo1_power_off(void)
+{
+	printk(KERN_INFO "OLPC XO-1 power off sequence...\n");
+
+	/* Enable all of these controls with 0 delay */
+	outl(0x40000000, pms_base + CS5536_PM_SCLK);
+	outl(0x40000000, pms_base + CS5536_PM_IN_SLPCTL);
+	outl(0x40000000, pms_base + CS5536_PM_WKXD);
+	outl(0x40000000, pms_base + CS5536_PM_WKD);
+
+	/* Clear status bits (possibly unnecessary) */
+	outl(0x0002ffff, pms_base  + CS5536_PM_SSC);
+	outl(0xffffffff, acpi_base + CS5536_PM_GPE0_STS);
+
+	/* Write SLP_EN bit to start the machinery */
+	outl(0x00002000, acpi_base + CS5536_PM1_CNT);
+}
+
+static int xo1_power_state_valid(suspend_state_t pm_state)
+{
+	/* suspend-to-RAM only */
+	return pm_state == PM_SUSPEND_MEM;
+}
+
+static const struct platform_suspend_ops xo1_suspend_ops = {
+	.valid = xo1_power_state_valid,
+	.enter = xo1_power_state_enter,
+};
+
+static int __devinit xo1_pm_probe(struct platform_device *pdev)
+{
+	struct resource *res;
+	int err;
+
+	/* don't run on non-XOs */
+	if (!machine_is_olpc())
+		return -ENODEV;
+
+	err = mfd_cell_enable(pdev);
+	if (err)
+		return err;
+
+	res = platform_get_resource(pdev, IORESOURCE_IO, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "can't fetch device resource info\n");
+		return -EIO;
+	}
+	if (strcmp(pdev->name, "cs5535-pms") == 0)
+		pms_base = res->start;
+	else if (strcmp(pdev->name, "olpc-xo1-pm-acpi") == 0)
+		acpi_base = res->start;
+
+	/* If we have both addresses, we can override the poweroff hook */
+	if (pms_base && acpi_base) {
+		suspend_set_ops(&xo1_suspend_ops);
+		pm_power_off = xo1_power_off;
+		printk(KERN_INFO "OLPC XO-1 support registered\n");
+	}
+
+	return 0;
+}
+
+static int __devexit xo1_pm_remove(struct platform_device *pdev)
+{
+	mfd_cell_disable(pdev);
+
+	if (strcmp(pdev->name, "cs5535-pms") == 0)
+		pms_base = 0;
+	else if (strcmp(pdev->name, "olpc-xo1-pm-acpi") == 0)
+		acpi_base = 0;
+
+	pm_power_off = NULL;
+	return 0;
+}
+
+static struct platform_driver cs5535_pms_driver = {
+	.driver = {
+		.name = "cs5535-pms",
+		.owner = THIS_MODULE,
+	},
+	.probe = xo1_pm_probe,
+	.remove = __devexit_p(xo1_pm_remove),
+};
+
+static struct platform_driver cs5535_acpi_driver = {
+	.driver = {
+		.name = "olpc-xo1-pm-acpi",
+		.owner = THIS_MODULE,
+	},
+	.probe = xo1_pm_probe,
+	.remove = __devexit_p(xo1_pm_remove),
+};
+
+static int __init xo1_pm_init(void)
+{
+	int r;
+
+	r = platform_driver_register(&cs5535_pms_driver);
+	if (r)
+		return r;
+
+	r = platform_driver_register(&cs5535_acpi_driver);
+	if (r)
+		platform_driver_unregister(&cs5535_pms_driver);
+
+	return r;
+}
+arch_initcall(xo1_pm_init);
diff --git a/arch/x86/platform/olpc/olpc-xo1-rtc.c b/arch/x86/platform/olpc/olpc-xo1-rtc.c
new file mode 100644
index 00000000000..a2b4efddd61
--- /dev/null
+++ b/arch/x86/platform/olpc/olpc-xo1-rtc.c
@@ -0,0 +1,81 @@
+/*
+ * Support for OLPC XO-1 Real Time Clock (RTC)
+ *
+ * Copyright (C) 2011 One Laptop per Child
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/mc146818rtc.h>
+#include <linux/platform_device.h>
+#include <linux/rtc.h>
+#include <linux/of.h>
+
+#include <asm/msr.h>
+#include <asm/olpc.h>
+
+static void rtc_wake_on(struct device *dev)
+{
+	olpc_xo1_pm_wakeup_set(CS5536_PM_RTC);
+}
+
+static void rtc_wake_off(struct device *dev)
+{
+	olpc_xo1_pm_wakeup_clear(CS5536_PM_RTC);
+}
+
+static struct resource rtc_platform_resource[] = {
+	[0] = {
+		.start	= RTC_PORT(0),
+		.end	= RTC_PORT(1),
+		.flags	= IORESOURCE_IO,
+	},
+	[1] = {
+		.start	= RTC_IRQ,
+		.end	= RTC_IRQ,
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+static struct cmos_rtc_board_info rtc_info = {
+	.rtc_day_alarm = 0,
+	.rtc_mon_alarm = 0,
+	.rtc_century = 0,
+	.wake_on = rtc_wake_on,
+	.wake_off = rtc_wake_off,
+};
+
+static struct platform_device xo1_rtc_device = {
+	.name = "rtc_cmos",
+	.id = -1,
+	.num_resources = ARRAY_SIZE(rtc_platform_resource),
+	.dev.platform_data = &rtc_info,
+	.resource = rtc_platform_resource,
+};
+
+static int __init xo1_rtc_init(void)
+{
+	int r;
+	struct device_node *node;
+
+	node = of_find_compatible_node(NULL, NULL, "olpc,xo1-rtc");
+	if (!node)
+		return 0;
+	of_node_put(node);
+
+	pr_info("olpc-xo1-rtc: Initializing OLPC XO-1 RTC\n");
+	rdmsrl(MSR_RTC_DOMA_OFFSET, rtc_info.rtc_day_alarm);
+	rdmsrl(MSR_RTC_MONA_OFFSET, rtc_info.rtc_mon_alarm);
+	rdmsrl(MSR_RTC_CEN_OFFSET, rtc_info.rtc_century);
+
+	r = platform_device_register(&xo1_rtc_device);
+	if (r)
+		return r;
+
+	device_init_wakeup(&xo1_rtc_device.dev, 1);
+	return 0;
+}
+arch_initcall(xo1_rtc_init);
diff --git a/arch/x86/platform/olpc/olpc-xo1-sci.c b/arch/x86/platform/olpc/olpc-xo1-sci.c
new file mode 100644
index 00000000000..1d4c783d732
--- /dev/null
+++ b/arch/x86/platform/olpc/olpc-xo1-sci.c
@@ -0,0 +1,614 @@
+/*
+ * Support for OLPC XO-1 System Control Interrupts (SCI)
+ *
+ * Copyright (C) 2010 One Laptop per Child
+ * Copyright (C) 2006 Red Hat, Inc.
+ * Copyright (C) 2006 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/cs5535.h>
+#include <linux/device.h>
+#include <linux/gpio.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/pm.h>
+#include <linux/mfd/core.h>
+#include <linux/power_supply.h>
+#include <linux/suspend.h>
+#include <linux/workqueue.h>
+
+#include <asm/io.h>
+#include <asm/msr.h>
+#include <asm/olpc.h>
+
+#define DRV_NAME	"olpc-xo1-sci"
+#define PFX		DRV_NAME ": "
+
+static unsigned long acpi_base;
+static struct input_dev *power_button_idev;
+static struct input_dev *ebook_switch_idev;
+static struct input_dev *lid_switch_idev;
+
+static int sci_irq;
+
+static bool lid_open;
+static bool lid_inverted;
+static int lid_wake_mode;
+
+enum lid_wake_modes {
+	LID_WAKE_ALWAYS,
+	LID_WAKE_OPEN,
+	LID_WAKE_CLOSE,
+};
+
+static const char * const lid_wake_mode_names[] = {
+	[LID_WAKE_ALWAYS] = "always",
+	[LID_WAKE_OPEN] = "open",
+	[LID_WAKE_CLOSE] = "close",
+};
+
+static void battery_status_changed(void)
+{
+	struct power_supply *psy = power_supply_get_by_name("olpc-battery");
+
+	if (psy) {
+		power_supply_changed(psy);
+		put_device(psy->dev);
+	}
+}
+
+static void ac_status_changed(void)
+{
+	struct power_supply *psy = power_supply_get_by_name("olpc-ac");
+
+	if (psy) {
+		power_supply_changed(psy);
+		put_device(psy->dev);
+	}
+}
+
+/* Report current ebook switch state through input layer */
+static void send_ebook_state(void)
+{
+	unsigned char state;
+
+	if (olpc_ec_cmd(EC_READ_EB_MODE, NULL, 0, &state, 1)) {
+		pr_err(PFX "failed to get ebook state\n");
+		return;
+	}
+
+	input_report_switch(ebook_switch_idev, SW_TABLET_MODE, state);
+	input_sync(ebook_switch_idev);
+}
+
+static void flip_lid_inverter(void)
+{
+	/* gpio is high; invert so we'll get l->h event interrupt */
+	if (lid_inverted)
+		cs5535_gpio_clear(OLPC_GPIO_LID, GPIO_INPUT_INVERT);
+	else
+		cs5535_gpio_set(OLPC_GPIO_LID, GPIO_INPUT_INVERT);
+	lid_inverted = !lid_inverted;
+}
+
+static void detect_lid_state(void)
+{
+	/*
+	 * the edge detector hookup on the gpio inputs on the geode is
+	 * odd, to say the least.  See http://dev.laptop.org/ticket/5703
+	 * for details, but in a nutshell:  we don't use the edge
+	 * detectors.  instead, we make use of an anomoly:  with the both
+	 * edge detectors turned off, we still get an edge event on a
+	 * positive edge transition.  to take advantage of this, we use the
+	 * front-end inverter to ensure that that's the edge we're always
+	 * going to see next.
+	 */
+
+	int state;
+
+	state = cs5535_gpio_isset(OLPC_GPIO_LID, GPIO_READ_BACK);
+	lid_open = !state ^ !lid_inverted; /* x ^^ y */
+	if (!state)
+		return;
+
+	flip_lid_inverter();
+}
+
+/* Report current lid switch state through input layer */
+static void send_lid_state(void)
+{
+	input_report_switch(lid_switch_idev, SW_LID, !lid_open);
+	input_sync(lid_switch_idev);
+}
+
+static ssize_t lid_wake_mode_show(struct device *dev,
+				  struct device_attribute *attr, char *buf)
+{
+	const char *mode = lid_wake_mode_names[lid_wake_mode];
+	return sprintf(buf, "%s\n", mode);
+}
+static ssize_t lid_wake_mode_set(struct device *dev,
+				 struct device_attribute *attr,
+				 const char *buf, size_t count)
+{
+	int i;
+	for (i = 0; i < ARRAY_SIZE(lid_wake_mode_names); i++) {
+		const char *mode = lid_wake_mode_names[i];
+		if (strlen(mode) != count || strncasecmp(mode, buf, count))
+			continue;
+
+		lid_wake_mode = i;
+		return count;
+	}
+	return -EINVAL;
+}
+static DEVICE_ATTR(lid_wake_mode, S_IWUSR | S_IRUGO, lid_wake_mode_show,
+		   lid_wake_mode_set);
+
+/*
+ * Process all items in the EC's SCI queue.
+ *
+ * This is handled in a workqueue because olpc_ec_cmd can be slow (and
+ * can even timeout).
+ *
+ * If propagate_events is false, the queue is drained without events being
+ * generated for the interrupts.
+ */
+static void process_sci_queue(bool propagate_events)
+{
+	int r;
+	u16 data;
+
+	do {
+		r = olpc_ec_sci_query(&data);
+		if (r || !data)
+			break;
+
+		pr_debug(PFX "SCI 0x%x received\n", data);
+
+		switch (data) {
+		case EC_SCI_SRC_BATERR:
+		case EC_SCI_SRC_BATSOC:
+		case EC_SCI_SRC_BATTERY:
+		case EC_SCI_SRC_BATCRIT:
+			battery_status_changed();
+			break;
+		case EC_SCI_SRC_ACPWR:
+			ac_status_changed();
+			break;
+		}
+
+		if (data == EC_SCI_SRC_EBOOK && propagate_events)
+			send_ebook_state();
+	} while (data);
+
+	if (r)
+		pr_err(PFX "Failed to clear SCI queue");
+}
+
+static void process_sci_queue_work(struct work_struct *work)
+{
+	process_sci_queue(true);
+}
+
+static DECLARE_WORK(sci_work, process_sci_queue_work);
+
+static irqreturn_t xo1_sci_intr(int irq, void *dev_id)
+{
+	struct platform_device *pdev = dev_id;
+	u32 sts;
+	u32 gpe;
+
+	sts = inl(acpi_base + CS5536_PM1_STS);
+	outl(sts | 0xffff, acpi_base + CS5536_PM1_STS);
+
+	gpe = inl(acpi_base + CS5536_PM_GPE0_STS);
+	outl(0xffffffff, acpi_base + CS5536_PM_GPE0_STS);
+
+	dev_dbg(&pdev->dev, "sts %x gpe %x\n", sts, gpe);
+
+	if (sts & CS5536_PWRBTN_FLAG && !(sts & CS5536_WAK_FLAG)) {
+		input_report_key(power_button_idev, KEY_POWER, 1);
+		input_sync(power_button_idev);
+		input_report_key(power_button_idev, KEY_POWER, 0);
+		input_sync(power_button_idev);
+	}
+
+	if (gpe & CS5536_GPIOM7_PME_FLAG) { /* EC GPIO */
+		cs5535_gpio_set(OLPC_GPIO_ECSCI, GPIO_NEGATIVE_EDGE_STS);
+		schedule_work(&sci_work);
+	}
+
+	cs5535_gpio_set(OLPC_GPIO_LID, GPIO_NEGATIVE_EDGE_STS);
+	cs5535_gpio_set(OLPC_GPIO_LID, GPIO_POSITIVE_EDGE_STS);
+	detect_lid_state();
+	send_lid_state();
+
+	return IRQ_HANDLED;
+}
+
+static int xo1_sci_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	if (device_may_wakeup(&power_button_idev->dev))
+		olpc_xo1_pm_wakeup_set(CS5536_PM_PWRBTN);
+	else
+		olpc_xo1_pm_wakeup_clear(CS5536_PM_PWRBTN);
+
+	if (device_may_wakeup(&ebook_switch_idev->dev))
+		olpc_ec_wakeup_set(EC_SCI_SRC_EBOOK);
+	else
+		olpc_ec_wakeup_clear(EC_SCI_SRC_EBOOK);
+
+	if (!device_may_wakeup(&lid_switch_idev->dev)) {
+		cs5535_gpio_clear(OLPC_GPIO_LID, GPIO_EVENTS_ENABLE);
+	} else if ((lid_open && lid_wake_mode == LID_WAKE_OPEN) ||
+		   (!lid_open && lid_wake_mode == LID_WAKE_CLOSE)) {
+		flip_lid_inverter();
+
+		/* we may have just caused an event */
+		cs5535_gpio_set(OLPC_GPIO_LID, GPIO_NEGATIVE_EDGE_STS);
+		cs5535_gpio_set(OLPC_GPIO_LID, GPIO_POSITIVE_EDGE_STS);
+
+		cs5535_gpio_set(OLPC_GPIO_LID, GPIO_EVENTS_ENABLE);
+	}
+
+	return 0;
+}
+
+static int xo1_sci_resume(struct platform_device *pdev)
+{
+	/*
+	 * We don't know what may have happened while we were asleep.
+	 * Reestablish our lid setup so we're sure to catch all transitions.
+	 */
+	detect_lid_state();
+	send_lid_state();
+	cs5535_gpio_set(OLPC_GPIO_LID, GPIO_EVENTS_ENABLE);
+
+	/* Enable all EC events */
+	olpc_ec_mask_write(EC_SCI_SRC_ALL);
+
+	/* Power/battery status might have changed too */
+	battery_status_changed();
+	ac_status_changed();
+	return 0;
+}
+
+static int __devinit setup_sci_interrupt(struct platform_device *pdev)
+{
+	u32 lo, hi;
+	u32 sts;
+	int r;
+
+	rdmsr(0x51400020, lo, hi);
+	sci_irq = (lo >> 20) & 15;
+
+	if (sci_irq) {
+		dev_info(&pdev->dev, "SCI is mapped to IRQ %d\n", sci_irq);
+	} else {
+		/* Zero means masked */
+		dev_info(&pdev->dev, "SCI unmapped. Mapping to IRQ 3\n");
+		sci_irq = 3;
+		lo |= 0x00300000;
+		wrmsrl(0x51400020, lo);
+	}
+
+	/* Select level triggered in PIC */
+	if (sci_irq < 8) {
+		lo = inb(CS5536_PIC_INT_SEL1);
+		lo |= 1 << sci_irq;
+		outb(lo, CS5536_PIC_INT_SEL1);
+	} else {
+		lo = inb(CS5536_PIC_INT_SEL2);
+		lo |= 1 << (sci_irq - 8);
+		outb(lo, CS5536_PIC_INT_SEL2);
+	}
+
+	/* Enable SCI from power button, and clear pending interrupts */
+	sts = inl(acpi_base + CS5536_PM1_STS);
+	outl((CS5536_PM_PWRBTN << 16) | 0xffff, acpi_base + CS5536_PM1_STS);
+
+	r = request_irq(sci_irq, xo1_sci_intr, 0, DRV_NAME, pdev);
+	if (r)
+		dev_err(&pdev->dev, "can't request interrupt\n");
+
+	return r;
+}
+
+static int __devinit setup_ec_sci(void)
+{
+	int r;
+
+	r = gpio_request(OLPC_GPIO_ECSCI, "OLPC-ECSCI");
+	if (r)
+		return r;
+
+	gpio_direction_input(OLPC_GPIO_ECSCI);
+
+	/* Clear pending EC SCI events */
+	cs5535_gpio_set(OLPC_GPIO_ECSCI, GPIO_NEGATIVE_EDGE_STS);
+	cs5535_gpio_set(OLPC_GPIO_ECSCI, GPIO_POSITIVE_EDGE_STS);
+
+	/*
+	 * Enable EC SCI events, and map them to both a PME and the SCI
+	 * interrupt.
+	 *
+	 * Ordinarily, in addition to functioning as GPIOs, Geode GPIOs can
+	 * be mapped to regular interrupts *or* Geode-specific Power
+	 * Management Events (PMEs) - events that bring the system out of
+	 * suspend. In this case, we want both of those things - the system
+	 * wakeup, *and* the ability to get an interrupt when an event occurs.
+	 *
+	 * To achieve this, we map the GPIO to a PME, and then we use one
+	 * of the many generic knobs on the CS5535 PIC to additionally map the
+	 * PME to the regular SCI interrupt line.
+	 */
+	cs5535_gpio_set(OLPC_GPIO_ECSCI, GPIO_EVENTS_ENABLE);
+
+	/* Set the SCI to cause a PME event on group 7 */
+	cs5535_gpio_setup_event(OLPC_GPIO_ECSCI, 7, 1);
+
+	/* And have group 7 also fire the SCI interrupt */
+	cs5535_pic_unreqz_select_high(7, sci_irq);
+
+	return 0;
+}
+
+static void free_ec_sci(void)
+{
+	gpio_free(OLPC_GPIO_ECSCI);
+}
+
+static int __devinit setup_lid_events(void)
+{
+	int r;
+
+	r = gpio_request(OLPC_GPIO_LID, "OLPC-LID");
+	if (r)
+		return r;
+
+	gpio_direction_input(OLPC_GPIO_LID);
+
+	cs5535_gpio_clear(OLPC_GPIO_LID, GPIO_INPUT_INVERT);
+	lid_inverted = 0;
+
+	/* Clear edge detection and event enable for now */
+	cs5535_gpio_clear(OLPC_GPIO_LID, GPIO_EVENTS_ENABLE);
+	cs5535_gpio_clear(OLPC_GPIO_LID, GPIO_NEGATIVE_EDGE_EN);
+	cs5535_gpio_clear(OLPC_GPIO_LID, GPIO_POSITIVE_EDGE_EN);
+	cs5535_gpio_set(OLPC_GPIO_LID, GPIO_NEGATIVE_EDGE_STS);
+	cs5535_gpio_set(OLPC_GPIO_LID, GPIO_POSITIVE_EDGE_STS);
+
+	/* Set the LID to cause an PME event on group 6 */
+	cs5535_gpio_setup_event(OLPC_GPIO_LID, 6, 1);
+
+	/* Set PME group 6 to fire the SCI interrupt */
+	cs5535_gpio_set_irq(6, sci_irq);
+
+	/* Enable the event */
+	cs5535_gpio_set(OLPC_GPIO_LID, GPIO_EVENTS_ENABLE);
+
+	return 0;
+}
+
+static void free_lid_events(void)
+{
+	gpio_free(OLPC_GPIO_LID);
+}
+
+static int __devinit setup_power_button(struct platform_device *pdev)
+{
+	int r;
+
+	power_button_idev = input_allocate_device();
+	if (!power_button_idev)
+		return -ENOMEM;
+
+	power_button_idev->name = "Power Button";
+	power_button_idev->phys = DRV_NAME "/input0";
+	set_bit(EV_KEY, power_button_idev->evbit);
+	set_bit(KEY_POWER, power_button_idev->keybit);
+
+	power_button_idev->dev.parent = &pdev->dev;
+	device_init_wakeup(&power_button_idev->dev, 1);
+
+	r = input_register_device(power_button_idev);
+	if (r) {
+		dev_err(&pdev->dev, "failed to register power button: %d\n", r);
+		input_free_device(power_button_idev);
+	}
+
+	return r;
+}
+
+static void free_power_button(void)
+{
+	input_unregister_device(power_button_idev);
+	input_free_device(power_button_idev);
+}
+
+static int __devinit setup_ebook_switch(struct platform_device *pdev)
+{
+	int r;
+
+	ebook_switch_idev = input_allocate_device();
+	if (!ebook_switch_idev)
+		return -ENOMEM;
+
+	ebook_switch_idev->name = "EBook Switch";
+	ebook_switch_idev->phys = DRV_NAME "/input1";
+	set_bit(EV_SW, ebook_switch_idev->evbit);
+	set_bit(SW_TABLET_MODE, ebook_switch_idev->swbit);
+
+	ebook_switch_idev->dev.parent = &pdev->dev;
+	device_set_wakeup_capable(&ebook_switch_idev->dev, true);
+
+	r = input_register_device(ebook_switch_idev);
+	if (r) {
+		dev_err(&pdev->dev, "failed to register ebook switch: %d\n", r);
+		input_free_device(ebook_switch_idev);
+	}
+
+	return r;
+}
+
+static void free_ebook_switch(void)
+{
+	input_unregister_device(ebook_switch_idev);
+	input_free_device(ebook_switch_idev);
+}
+
+static int __devinit setup_lid_switch(struct platform_device *pdev)
+{
+	int r;
+
+	lid_switch_idev = input_allocate_device();
+	if (!lid_switch_idev)
+		return -ENOMEM;
+
+	lid_switch_idev->name = "Lid Switch";
+	lid_switch_idev->phys = DRV_NAME "/input2";
+	set_bit(EV_SW, lid_switch_idev->evbit);
+	set_bit(SW_LID, lid_switch_idev->swbit);
+
+	lid_switch_idev->dev.parent = &pdev->dev;
+	device_set_wakeup_capable(&lid_switch_idev->dev, true);
+
+	r = input_register_device(lid_switch_idev);
+	if (r) {
+		dev_err(&pdev->dev, "failed to register lid switch: %d\n", r);
+		goto err_register;
+	}
+
+	r = device_create_file(&lid_switch_idev->dev, &dev_attr_lid_wake_mode);
+	if (r) {
+		dev_err(&pdev->dev, "failed to create wake mode attr: %d\n", r);
+		goto err_create_attr;
+	}
+
+	return 0;
+
+err_create_attr:
+	input_unregister_device(lid_switch_idev);
+err_register:
+	input_free_device(lid_switch_idev);
+	return r;
+}
+
+static void free_lid_switch(void)
+{
+	device_remove_file(&lid_switch_idev->dev, &dev_attr_lid_wake_mode);
+	input_unregister_device(lid_switch_idev);
+	input_free_device(lid_switch_idev);
+}
+
+static int __devinit xo1_sci_probe(struct platform_device *pdev)
+{
+	struct resource *res;
+	int r;
+
+	/* don't run on non-XOs */
+	if (!machine_is_olpc())
+		return -ENODEV;
+
+	r = mfd_cell_enable(pdev);
+	if (r)
+		return r;
+
+	res = platform_get_resource(pdev, IORESOURCE_IO, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "can't fetch device resource info\n");
+		return -EIO;
+	}
+	acpi_base = res->start;
+
+	r = setup_power_button(pdev);
+	if (r)
+		return r;
+
+	r = setup_ebook_switch(pdev);
+	if (r)
+		goto err_ebook;
+
+	r = setup_lid_switch(pdev);
+	if (r)
+		goto err_lid;
+
+	r = setup_lid_events();
+	if (r)
+		goto err_lidevt;
+
+	r = setup_ec_sci();
+	if (r)
+		goto err_ecsci;
+
+	/* Enable PME generation for EC-generated events */
+	outl(CS5536_GPIOM6_PME_EN | CS5536_GPIOM7_PME_EN,
+		acpi_base + CS5536_PM_GPE0_EN);
+
+	/* Clear pending events */
+	outl(0xffffffff, acpi_base + CS5536_PM_GPE0_STS);
+	process_sci_queue(false);
+
+	/* Initial sync */
+	send_ebook_state();
+	detect_lid_state();
+	send_lid_state();
+
+	r = setup_sci_interrupt(pdev);
+	if (r)
+		goto err_sci;
+
+	/* Enable all EC events */
+	olpc_ec_mask_write(EC_SCI_SRC_ALL);
+
+	return r;
+
+err_sci:
+	free_ec_sci();
+err_ecsci:
+	free_lid_events();
+err_lidevt:
+	free_lid_switch();
+err_lid:
+	free_ebook_switch();
+err_ebook:
+	free_power_button();
+	return r;
+}
+
+static int __devexit xo1_sci_remove(struct platform_device *pdev)
+{
+	mfd_cell_disable(pdev);
+	free_irq(sci_irq, pdev);
+	cancel_work_sync(&sci_work);
+	free_ec_sci();
+	free_lid_events();
+	free_lid_switch();
+	free_ebook_switch();
+	free_power_button();
+	acpi_base = 0;
+	return 0;
+}
+
+static struct platform_driver xo1_sci_driver = {
+	.driver = {
+		.name = "olpc-xo1-sci-acpi",
+	},
+	.probe = xo1_sci_probe,
+	.remove = __devexit_p(xo1_sci_remove),
+	.suspend = xo1_sci_suspend,
+	.resume = xo1_sci_resume,
+};
+
+static int __init xo1_sci_init(void)
+{
+	return platform_driver_register(&xo1_sci_driver);
+}
+arch_initcall(xo1_sci_init);
diff --git a/arch/x86/platform/olpc/olpc-xo1.c b/arch/x86/platform/olpc/olpc-xo1.c
deleted file mode 100644
index ab81fb27176..00000000000
--- a/arch/x86/platform/olpc/olpc-xo1.c
+++ /dev/null
@@ -1,146 +0,0 @@
-/*
- * Support for features of the OLPC XO-1 laptop
- *
- * Copyright (C) 2010 Andres Salomon <dilinger@queued.net>
- * Copyright (C) 2010 One Laptop per Child
- * Copyright (C) 2006 Red Hat, Inc.
- * Copyright (C) 2006 Advanced Micro Devices, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/pm.h>
-#include <linux/mfd/core.h>
-
-#include <asm/io.h>
-#include <asm/olpc.h>
-
-#define DRV_NAME "olpc-xo1"
-
-/* PMC registers (PMS block) */
-#define PM_SCLK		0x10
-#define PM_IN_SLPCTL	0x20
-#define PM_WKXD		0x34
-#define PM_WKD		0x30
-#define PM_SSC		0x54
-
-/* PM registers (ACPI block) */
-#define PM1_CNT		0x08
-#define PM_GPE0_STS	0x18
-
-static unsigned long acpi_base;
-static unsigned long pms_base;
-
-static void xo1_power_off(void)
-{
-	printk(KERN_INFO "OLPC XO-1 power off sequence...\n");
-
-	/* Enable all of these controls with 0 delay */
-	outl(0x40000000, pms_base + PM_SCLK);
-	outl(0x40000000, pms_base + PM_IN_SLPCTL);
-	outl(0x40000000, pms_base + PM_WKXD);
-	outl(0x40000000, pms_base + PM_WKD);
-
-	/* Clear status bits (possibly unnecessary) */
-	outl(0x0002ffff, pms_base  + PM_SSC);
-	outl(0xffffffff, acpi_base + PM_GPE0_STS);
-
-	/* Write SLP_EN bit to start the machinery */
-	outl(0x00002000, acpi_base + PM1_CNT);
-}
-
-static int __devinit olpc_xo1_probe(struct platform_device *pdev)
-{
-	struct resource *res;
-	int err;
-
-	/* don't run on non-XOs */
-	if (!machine_is_olpc())
-		return -ENODEV;
-
-	err = mfd_cell_enable(pdev);
-	if (err)
-		return err;
-
-	res = platform_get_resource(pdev, IORESOURCE_IO, 0);
-	if (!res) {
-		dev_err(&pdev->dev, "can't fetch device resource info\n");
-		return -EIO;
-	}
-	if (strcmp(pdev->name, "cs5535-pms") == 0)
-		pms_base = res->start;
-	else if (strcmp(pdev->name, "olpc-xo1-pm-acpi") == 0)
-		acpi_base = res->start;
-
-	/* If we have both addresses, we can override the poweroff hook */
-	if (pms_base && acpi_base) {
-		pm_power_off = xo1_power_off;
-		printk(KERN_INFO "OLPC XO-1 support registered\n");
-	}
-
-	return 0;
-}
-
-static int __devexit olpc_xo1_remove(struct platform_device *pdev)
-{
-	mfd_cell_disable(pdev);
-
-	if (strcmp(pdev->name, "cs5535-pms") == 0)
-		pms_base = 0;
-	else if (strcmp(pdev->name, "olpc-xo1-pm-acpi") == 0)
-		acpi_base = 0;
-
-	pm_power_off = NULL;
-	return 0;
-}
-
-static struct platform_driver cs5535_pms_drv = {
-	.driver = {
-		.name = "cs5535-pms",
-		.owner = THIS_MODULE,
-	},
-	.probe = olpc_xo1_probe,
-	.remove = __devexit_p(olpc_xo1_remove),
-};
-
-static struct platform_driver cs5535_acpi_drv = {
-	.driver = {
-		.name = "olpc-xo1-pm-acpi",
-		.owner = THIS_MODULE,
-	},
-	.probe = olpc_xo1_probe,
-	.remove = __devexit_p(olpc_xo1_remove),
-};
-
-static int __init olpc_xo1_init(void)
-{
-	int r;
-
-	r = platform_driver_register(&cs5535_pms_drv);
-	if (r)
-		return r;
-
-	r = platform_driver_register(&cs5535_acpi_drv);
-	if (r)
-		platform_driver_unregister(&cs5535_pms_drv);
-
-	return r;
-}
-
-static void __exit olpc_xo1_exit(void)
-{
-	platform_driver_unregister(&cs5535_acpi_drv);
-	platform_driver_unregister(&cs5535_pms_drv);
-}
-
-MODULE_AUTHOR("Daniel Drake <dsd@laptop.org>");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:cs5535-pms");
-
-module_init(olpc_xo1_init);
-module_exit(olpc_xo1_exit);
diff --git a/arch/x86/platform/olpc/olpc-xo15-sci.c b/arch/x86/platform/olpc/olpc-xo15-sci.c
new file mode 100644
index 00000000000..2b235b77d9a
--- /dev/null
+++ b/arch/x86/platform/olpc/olpc-xo15-sci.c
@@ -0,0 +1,168 @@
+/*
+ * Support for OLPC XO-1.5 System Control Interrupts (SCI)
+ *
+ * Copyright (C) 2009-2010 One Laptop per Child
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/device.h>
+#include <linux/slab.h>
+#include <linux/workqueue.h>
+#include <linux/power_supply.h>
+
+#include <acpi/acpi_bus.h>
+#include <acpi/acpi_drivers.h>
+#include <asm/olpc.h>
+
+#define DRV_NAME			"olpc-xo15-sci"
+#define PFX				DRV_NAME ": "
+#define XO15_SCI_CLASS			DRV_NAME
+#define XO15_SCI_DEVICE_NAME		"OLPC XO-1.5 SCI"
+
+static unsigned long xo15_sci_gpe;
+
+static void battery_status_changed(void)
+{
+	struct power_supply *psy = power_supply_get_by_name("olpc-battery");
+
+	if (psy) {
+		power_supply_changed(psy);
+		put_device(psy->dev);
+	}
+}
+
+static void ac_status_changed(void)
+{
+	struct power_supply *psy = power_supply_get_by_name("olpc-ac");
+
+	if (psy) {
+		power_supply_changed(psy);
+		put_device(psy->dev);
+	}
+}
+
+static void process_sci_queue(void)
+{
+	u16 data;
+	int r;
+
+	do {
+		r = olpc_ec_sci_query(&data);
+		if (r || !data)
+			break;
+
+		pr_debug(PFX "SCI 0x%x received\n", data);
+
+		switch (data) {
+		case EC_SCI_SRC_BATERR:
+		case EC_SCI_SRC_BATSOC:
+		case EC_SCI_SRC_BATTERY:
+		case EC_SCI_SRC_BATCRIT:
+			battery_status_changed();
+			break;
+		case EC_SCI_SRC_ACPWR:
+			ac_status_changed();
+			break;
+		}
+	} while (data);
+
+	if (r)
+		pr_err(PFX "Failed to clear SCI queue");
+}
+
+static void process_sci_queue_work(struct work_struct *work)
+{
+	process_sci_queue();
+}
+
+static DECLARE_WORK(sci_work, process_sci_queue_work);
+
+static u32 xo15_sci_gpe_handler(acpi_handle gpe_device, u32 gpe, void *context)
+{
+	schedule_work(&sci_work);
+	return ACPI_INTERRUPT_HANDLED | ACPI_REENABLE_GPE;
+}
+
+static int xo15_sci_add(struct acpi_device *device)
+{
+	unsigned long long tmp;
+	acpi_status status;
+
+	if (!device)
+		return -EINVAL;
+
+	strcpy(acpi_device_name(device), XO15_SCI_DEVICE_NAME);
+	strcpy(acpi_device_class(device), XO15_SCI_CLASS);
+
+	/* Get GPE bit assignment (EC events). */
+	status = acpi_evaluate_integer(device->handle, "_GPE", NULL, &tmp);
+	if (ACPI_FAILURE(status))
+		return -EINVAL;
+
+	xo15_sci_gpe = tmp;
+	status = acpi_install_gpe_handler(NULL, xo15_sci_gpe,
+					  ACPI_GPE_EDGE_TRIGGERED,
+					  xo15_sci_gpe_handler, device);
+	if (ACPI_FAILURE(status))
+		return -ENODEV;
+
+	dev_info(&device->dev, "Initialized, GPE = 0x%lx\n", xo15_sci_gpe);
+
+	/* Flush queue, and enable all SCI events */
+	process_sci_queue();
+	olpc_ec_mask_write(EC_SCI_SRC_ALL);
+
+	acpi_enable_gpe(NULL, xo15_sci_gpe);
+
+	/* Enable wake-on-EC */
+	if (device->wakeup.flags.valid)
+		device_init_wakeup(&device->dev, true);
+
+	return 0;
+}
+
+static int xo15_sci_remove(struct acpi_device *device, int type)
+{
+	acpi_disable_gpe(NULL, xo15_sci_gpe);
+	acpi_remove_gpe_handler(NULL, xo15_sci_gpe, xo15_sci_gpe_handler);
+	cancel_work_sync(&sci_work);
+	return 0;
+}
+
+static int xo15_sci_resume(struct acpi_device *device)
+{
+	/* Enable all EC events */
+	olpc_ec_mask_write(EC_SCI_SRC_ALL);
+
+	/* Power/battery status might have changed */
+	battery_status_changed();
+	ac_status_changed();
+
+	return 0;
+}
+
+static const struct acpi_device_id xo15_sci_device_ids[] = {
+	{"XO15EC", 0},
+	{"", 0},
+};
+
+static struct acpi_driver xo15_sci_drv = {
+	.name = DRV_NAME,
+	.class = XO15_SCI_CLASS,
+	.ids = xo15_sci_device_ids,
+	.ops = {
+		.add = xo15_sci_add,
+		.remove = xo15_sci_remove,
+		.resume = xo15_sci_resume,
+	},
+};
+
+static int __init xo15_sci_init(void)
+{
+	return acpi_bus_register_driver(&xo15_sci_drv);
+}
+device_initcall(xo15_sci_init);
diff --git a/arch/x86/platform/olpc/olpc.c b/arch/x86/platform/olpc/olpc.c
index 0060fd59ea0..7cce722667b 100644
--- a/arch/x86/platform/olpc/olpc.c
+++ b/arch/x86/platform/olpc/olpc.c
@@ -19,6 +19,7 @@
 #include <linux/string.h>
 #include <linux/platform_device.h>
 #include <linux/of.h>
+#include <linux/syscore_ops.h>
 
 #include <asm/geode.h>
 #include <asm/setup.h>
@@ -30,6 +31,9 @@ EXPORT_SYMBOL_GPL(olpc_platform_info);
 
 static DEFINE_SPINLOCK(ec_lock);
 
+/* EC event mask to be applied during suspend (defining wakeup sources). */
+static u16 ec_wakeup_mask;
+
 /* what the timeout *should* be (in ms) */
 #define EC_BASE_TIMEOUT 20
 
@@ -157,13 +161,13 @@ restart:
 	if (inbuf && inlen) {
 		/* write data to EC */
 		for (i = 0; i < inlen; i++) {
+			pr_devel("olpc-ec:  sending cmd arg 0x%x\n", inbuf[i]);
+			outb(inbuf[i], 0x68);
 			if (wait_on_ibf(0x6c, 0)) {
 				printk(KERN_ERR "olpc-ec:  timeout waiting for"
 						" EC accept data!\n");
 				goto err;
 			}
-			pr_devel("olpc-ec:  sending cmd arg 0x%x\n", inbuf[i]);
-			outb(inbuf[i], 0x68);
 		}
 	}
 	if (outbuf && outlen) {
@@ -188,6 +192,88 @@ err:
 }
 EXPORT_SYMBOL_GPL(olpc_ec_cmd);
 
+void olpc_ec_wakeup_set(u16 value)
+{
+	ec_wakeup_mask |= value;
+}
+EXPORT_SYMBOL_GPL(olpc_ec_wakeup_set);
+
+void olpc_ec_wakeup_clear(u16 value)
+{
+	ec_wakeup_mask &= ~value;
+}
+EXPORT_SYMBOL_GPL(olpc_ec_wakeup_clear);
+
+/*
+ * Returns true if the compile and runtime configurations allow for EC events
+ * to wake the system.
+ */
+bool olpc_ec_wakeup_available(void)
+{
+	if (!machine_is_olpc())
+		return false;
+
+	/*
+	 * XO-1 EC wakeups are available when olpc-xo1-sci driver is
+	 * compiled in
+	 */
+#ifdef CONFIG_OLPC_XO1_SCI
+	if (olpc_platform_info.boardrev < olpc_board_pre(0xd0)) /* XO-1 */
+		return true;
+#endif
+
+	/*
+	 * XO-1.5 EC wakeups are available when olpc-xo15-sci driver is
+	 * compiled in
+	 */
+#ifdef CONFIG_OLPC_XO15_SCI
+	if (olpc_platform_info.boardrev >= olpc_board_pre(0xd0)) /* XO-1.5 */
+		return true;
+#endif
+
+	return false;
+}
+EXPORT_SYMBOL_GPL(olpc_ec_wakeup_available);
+
+int olpc_ec_mask_write(u16 bits)
+{
+	if (olpc_platform_info.flags & OLPC_F_EC_WIDE_SCI) {
+		__be16 ec_word = cpu_to_be16(bits);
+		return olpc_ec_cmd(EC_WRITE_EXT_SCI_MASK, (void *) &ec_word, 2,
+				   NULL, 0);
+	} else {
+		unsigned char ec_byte = bits & 0xff;
+		return olpc_ec_cmd(EC_WRITE_SCI_MASK, &ec_byte, 1, NULL, 0);
+	}
+}
+EXPORT_SYMBOL_GPL(olpc_ec_mask_write);
+
+int olpc_ec_sci_query(u16 *sci_value)
+{
+	int ret;
+
+	if (olpc_platform_info.flags & OLPC_F_EC_WIDE_SCI) {
+		__be16 ec_word;
+		ret = olpc_ec_cmd(EC_EXT_SCI_QUERY,
+			NULL, 0, (void *) &ec_word, 2);
+		if (ret == 0)
+			*sci_value = be16_to_cpu(ec_word);
+	} else {
+		unsigned char ec_byte;
+		ret = olpc_ec_cmd(EC_SCI_QUERY, NULL, 0, &ec_byte, 1);
+		if (ret == 0)
+			*sci_value = ec_byte;
+	}
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(olpc_ec_sci_query);
+
+static int olpc_ec_suspend(void)
+{
+	return olpc_ec_mask_write(ec_wakeup_mask);
+}
+
 static bool __init check_ofw_architecture(struct device_node *root)
 {
 	const char *olpc_arch;
@@ -242,6 +328,10 @@ static int __init add_xo1_platform_devices(void)
 	return 0;
 }
 
+static struct syscore_ops olpc_syscore_ops = {
+	.suspend = olpc_ec_suspend,
+};
+
 static int __init olpc_init(void)
 {
 	int r = 0;
@@ -266,6 +356,9 @@ static int __init olpc_init(void)
 			!cs5535_has_vsa2())
 		x86_init.pci.arch_init = pci_olpc_init;
 #endif
+	/* EC version 0x5f adds support for wide SCI mask */
+	if (olpc_platform_info.ecver >= 0x5f)
+		olpc_platform_info.flags |= OLPC_F_EC_WIDE_SCI;
 
 	printk(KERN_INFO "OLPC board revision %s%X (EC=%x)\n",
 			((olpc_platform_info.boardrev & 0xf) < 8) ? "pre" : "",
@@ -278,6 +371,8 @@ static int __init olpc_init(void)
 			return r;
 	}
 
+	register_syscore_ops(&olpc_syscore_ops);
+
 	return 0;
 }
 
diff --git a/arch/x86/platform/olpc/olpc_dt.c b/arch/x86/platform/olpc/olpc_dt.c
index d39f63d017d..d6ee9298692 100644
--- a/arch/x86/platform/olpc/olpc_dt.c
+++ b/arch/x86/platform/olpc/olpc_dt.c
@@ -165,6 +165,107 @@ static struct of_pdt_ops prom_olpc_ops __initdata = {
 	.pkg2path = olpc_dt_pkg2path,
 };
 
+static phandle __init olpc_dt_finddevice(const char *path)
+{
+	phandle node;
+	const void *args[] = { path };
+	void *res[] = { &node };
+
+	if (olpc_ofw("finddevice", args, res)) {
+		pr_err("olpc_dt: finddevice failed!\n");
+		return 0;
+	}
+
+	if ((s32) node == -1)
+		return 0;
+
+	return node;
+}
+
+static int __init olpc_dt_interpret(const char *words)
+{
+	int result;
+	const void *args[] = { words };
+	void *res[] = { &result };
+
+	if (olpc_ofw("interpret", args, res)) {
+		pr_err("olpc_dt: interpret failed!\n");
+		return -1;
+	}
+
+	return result;
+}
+
+/*
+ * Extract board revision directly from OFW device tree.
+ * We can't use olpc_platform_info because that hasn't been set up yet.
+ */
+static u32 __init olpc_dt_get_board_revision(void)
+{
+	phandle node;
+	__be32 rev;
+	int r;
+
+	node = olpc_dt_finddevice("/");
+	if (!node)
+		return 0;
+
+	r = olpc_dt_getproperty(node, "board-revision-int",
+				(char *) &rev, sizeof(rev));
+	if (r < 0)
+		return 0;
+
+	return be32_to_cpu(rev);
+}
+
+void __init olpc_dt_fixup(void)
+{
+	int r;
+	char buf[64];
+	phandle node;
+	u32 board_rev;
+
+	node = olpc_dt_finddevice("/battery@0");
+	if (!node)
+		return;
+
+	/*
+	 * If the battery node has a compatible property, we are running a new
+	 * enough firmware and don't have fixups to make.
+	 */
+	r = olpc_dt_getproperty(node, "compatible", buf, sizeof(buf));
+	if (r > 0)
+		return;
+
+	pr_info("PROM DT: Old firmware detected, applying fixes\n");
+
+	/* Add olpc,xo1-battery compatible marker to battery node */
+	olpc_dt_interpret("\" /battery@0\" find-device"
+		" \" olpc,xo1-battery\" +compatible"
+		" device-end");
+
+	board_rev = olpc_dt_get_board_revision();
+	if (!board_rev)
+		return;
+
+	if (board_rev >= olpc_board_pre(0xd0)) {
+		/* XO-1.5: add dcon device */
+		olpc_dt_interpret("\" /pci/display@1\" find-device"
+			" new-device"
+			" \" dcon\" device-name \" olpc,xo1-dcon\" +compatible"
+			" finish-device device-end");
+	} else {
+		/* XO-1: add dcon device, mark RTC as olpc,xo1-rtc */
+		olpc_dt_interpret("\" /pci/display@1,1\" find-device"
+			" new-device"
+			" \" dcon\" device-name \" olpc,xo1-dcon\" +compatible"
+			" finish-device device-end"
+			" \" /rtc\" find-device"
+			" \" olpc,xo1-rtc\" +compatible"
+			" device-end");
+	}
+}
+
 void __init olpc_dt_build_devicetree(void)
 {
 	phandle root;
@@ -172,6 +273,8 @@ void __init olpc_dt_build_devicetree(void)
 	if (!olpc_ofw_is_installed())
 		return;
 
+	olpc_dt_fixup();
+
 	root = olpc_dt_getsibling(0);
 	if (!root) {
 		pr_err("PROM: unable to get root node from OFW!\n");
diff --git a/arch/x86/platform/olpc/xo1-wakeup.S b/arch/x86/platform/olpc/xo1-wakeup.S
new file mode 100644
index 00000000000..948deb28975
--- /dev/null
+++ b/arch/x86/platform/olpc/xo1-wakeup.S
@@ -0,0 +1,124 @@
+.text
+#include <linux/linkage.h>
+#include <asm/segment.h>
+#include <asm/page.h>
+#include <asm/pgtable_32.h>
+
+	.macro writepost,value
+		movb $0x34, %al
+		outb %al, $0x70
+		movb $\value, %al
+		outb %al, $0x71
+	.endm
+
+wakeup_start:
+	# OFW lands us here, running in protected mode, with a
+	# kernel-compatible GDT already setup.
+
+	# Clear any dangerous flags
+	pushl $0
+	popfl
+
+	writepost 0x31
+
+	# Set up %cr3
+	movl $initial_page_table - __PAGE_OFFSET, %eax
+	movl %eax, %cr3
+
+	movl saved_cr4, %eax
+	movl %eax, %cr4
+
+	movl saved_cr0, %eax
+	movl %eax, %cr0
+
+	# Control registers were modified, pipeline resync is needed
+	jmp 1f
+1:
+
+	movw    $__KERNEL_DS, %ax
+	movw    %ax, %ss
+	movw    %ax, %ds
+	movw    %ax, %es
+	movw    %ax, %fs
+	movw    %ax, %gs
+
+	lgdt    saved_gdt
+	lidt    saved_idt
+	lldt    saved_ldt
+	ljmp    $(__KERNEL_CS),$1f
+1:
+	movl    %cr3, %eax
+	movl    %eax, %cr3
+	wbinvd
+
+	# Go back to the return point
+	jmp ret_point
+
+save_registers:
+	sgdt  saved_gdt
+	sidt  saved_idt
+	sldt  saved_ldt
+
+	pushl %edx
+	movl %cr4, %edx
+	movl %edx, saved_cr4
+
+	movl %cr0, %edx
+	movl %edx, saved_cr0
+
+	popl %edx
+
+	movl %ebx, saved_context_ebx
+	movl %ebp, saved_context_ebp
+	movl %esi, saved_context_esi
+	movl %edi, saved_context_edi
+
+	pushfl
+	popl saved_context_eflags
+
+	ret
+
+restore_registers:
+	movl saved_context_ebp, %ebp
+	movl saved_context_ebx, %ebx
+	movl saved_context_esi, %esi
+	movl saved_context_edi, %edi
+
+	pushl saved_context_eflags
+	popfl
+
+	ret
+
+ENTRY(do_olpc_suspend_lowlevel)
+	call	save_processor_state
+	call	save_registers
+
+	# This is the stack context we want to remember
+	movl %esp, saved_context_esp
+
+	pushl	$3
+	call	xo1_do_sleep
+
+	jmp	wakeup_start
+	.p2align 4,,7
+ret_point:
+	movl    saved_context_esp, %esp
+
+	writepost 0x32
+
+	call	restore_registers
+	call	restore_processor_state
+	ret
+
+.data
+saved_gdt:             .long   0,0
+saved_idt:             .long   0,0
+saved_ldt:             .long   0
+saved_cr4:             .long   0
+saved_cr0:             .long   0
+saved_context_esp:     .long   0
+saved_context_edi:     .long   0
+saved_context_esi:     .long   0
+saved_context_ebx:     .long   0
+saved_context_ebp:     .long   0
+saved_context_eflags:  .long   0
diff --git a/arch/x86/platform/uv/bios_uv.c b/arch/x86/platform/uv/bios_uv.c
index 8bc57baaa9a..766612137a6 100644
--- a/arch/x86/platform/uv/bios_uv.c
+++ b/arch/x86/platform/uv/bios_uv.c
@@ -20,6 +20,7 @@
  */
 
 #include <linux/efi.h>
+#include <linux/export.h>
 #include <asm/efi.h>
 #include <linux/io.h>
 #include <asm/uv/bios.h>
diff --git a/arch/x86/platform/uv/tlb_uv.c b/arch/x86/platform/uv/tlb_uv.c
index 68e467f69fe..5b552198f77 100644
--- a/arch/x86/platform/uv/tlb_uv.c
+++ b/arch/x86/platform/uv/tlb_uv.c
@@ -115,9 +115,6 @@ early_param("nobau", setup_nobau);
 
 /* base pnode in this partition */
 static int uv_base_pnode __read_mostly;
-/* position of pnode (which is nasid>>1): */
-static int uv_nshift __read_mostly;
-static unsigned long uv_mmask __read_mostly;
 
 static DEFINE_PER_CPU(struct ptc_stats, ptcstats);
 static DEFINE_PER_CPU(struct bau_control, bau_control);
@@ -296,14 +293,18 @@ static void bau_process_message(struct msg_desc *mdp,
 }
 
 /*
- * Determine the first cpu on a uvhub.
+ * Determine the first cpu on a pnode.
  */
-static int uvhub_to_first_cpu(int uvhub)
+static int pnode_to_first_cpu(int pnode, struct bau_control *smaster)
 {
 	int cpu;
-	for_each_present_cpu(cpu)
-		if (uvhub == uv_cpu_to_blade_id(cpu))
+	struct hub_and_pnode *hpp;
+
+	for_each_present_cpu(cpu) {
+		hpp = &smaster->thp[cpu];
+		if (pnode == hpp->pnode)
 			return cpu;
+	}
 	return -1;
 }
 
@@ -366,28 +367,32 @@ static void do_reset(void *ptr)
  * Use IPI to get all target uvhubs to release resources held by
  * a given sending cpu number.
  */
-static void reset_with_ipi(struct bau_targ_hubmask *distribution, int sender)
+static void reset_with_ipi(struct pnmask *distribution, struct bau_control *bcp)
 {
-	int uvhub;
+	int pnode;
+	int apnode;
 	int maskbits;
-	cpumask_t mask;
+	int sender = bcp->cpu;
+	cpumask_t *mask = bcp->uvhub_master->cpumask;
+	struct bau_control *smaster = bcp->socket_master;
 	struct reset_args reset_args;
 
 	reset_args.sender = sender;
-	cpus_clear(mask);
+	cpus_clear(*mask);
 	/* find a single cpu for each uvhub in this distribution mask */
-	maskbits = sizeof(struct bau_targ_hubmask) * BITSPERBYTE;
-	for (uvhub = 0; uvhub < maskbits; uvhub++) {
+	maskbits = sizeof(struct pnmask) * BITSPERBYTE;
+	/* each bit is a pnode relative to the partition base pnode */
+	for (pnode = 0; pnode < maskbits; pnode++) {
 		int cpu;
-		if (!bau_uvhub_isset(uvhub, distribution))
+		if (!bau_uvhub_isset(pnode, distribution))
 			continue;
-		/* find a cpu for this uvhub */
-		cpu = uvhub_to_first_cpu(uvhub);
-		cpu_set(cpu, mask);
+		apnode = pnode + bcp->partition_base_pnode;
+		cpu = pnode_to_first_cpu(apnode, smaster);
+		cpu_set(cpu, *mask);
 	}
 
 	/* IPI all cpus; preemption is already disabled */
-	smp_call_function_many(&mask, do_reset, (void *)&reset_args, 1);
+	smp_call_function_many(mask, do_reset, (void *)&reset_args, 1);
 	return;
 }
 
@@ -604,7 +609,7 @@ static void destination_plugged(struct bau_desc *bau_desc,
 		quiesce_local_uvhub(hmaster);
 
 		spin_lock(&hmaster->queue_lock);
-		reset_with_ipi(&bau_desc->distribution, bcp->cpu);
+		reset_with_ipi(&bau_desc->distribution, bcp);
 		spin_unlock(&hmaster->queue_lock);
 
 		end_uvhub_quiesce(hmaster);
@@ -626,7 +631,7 @@ static void destination_timeout(struct bau_desc *bau_desc,
 		quiesce_local_uvhub(hmaster);
 
 		spin_lock(&hmaster->queue_lock);
-		reset_with_ipi(&bau_desc->distribution, bcp->cpu);
+		reset_with_ipi(&bau_desc->distribution, bcp);
 		spin_unlock(&hmaster->queue_lock);
 
 		end_uvhub_quiesce(hmaster);
@@ -1334,9 +1339,10 @@ static ssize_t tunables_write(struct file *file, const char __user *user,
 
 	instr[count] = '\0';
 
-	bcp = &per_cpu(bau_control, smp_processor_id());
-
+	cpu = get_cpu();
+	bcp = &per_cpu(bau_control, cpu);
 	ret = parse_tunables_write(bcp, instr, count);
+	put_cpu();
 	if (ret)
 		return ret;
 
@@ -1426,7 +1432,7 @@ static void activation_descriptor_init(int node, int pnode, int base_pnode)
 {
 	int i;
 	int cpu;
-	unsigned long pa;
+	unsigned long gpa;
 	unsigned long m;
 	unsigned long n;
 	size_t dsize;
@@ -1442,9 +1448,9 @@ static void activation_descriptor_init(int node, int pnode, int base_pnode)
 	bau_desc = kmalloc_node(dsize, GFP_KERNEL, node);
 	BUG_ON(!bau_desc);
 
-	pa = uv_gpa(bau_desc); /* need the real nasid*/
-	n = pa >> uv_nshift;
-	m = pa & uv_mmask;
+	gpa = uv_gpa(bau_desc);
+	n = uv_gpa_to_gnode(gpa);
+	m = uv_gpa_to_offset(gpa);
 
 	/* the 14-bit pnode */
 	write_mmr_descriptor_base(pnode, (n << UV_DESC_PSHIFT | m));
@@ -1516,9 +1522,9 @@ static void pq_init(int node, int pnode)
 		bcp->queue_last		= pqp + (DEST_Q_SIZE - 1);
 	}
 	/*
-	 * need the pnode of where the memory was really allocated
+	 * need the gnode of where the memory was really allocated
 	 */
-	pn = uv_gpa(pqp) >> uv_nshift;
+	pn = uv_gpa_to_gnode(uv_gpa(pqp));
 	first = uv_physnodeaddr(pqp);
 	pn_first = ((unsigned long)pn << UV_PAYLOADQ_PNODE_SHIFT) | first;
 	last = uv_physnodeaddr(pqp + (DEST_Q_SIZE - 1));
@@ -1687,6 +1693,16 @@ static void make_per_cpu_thp(struct bau_control *smaster)
 }
 
 /*
+ * Each uvhub is to get a local cpumask.
+ */
+static void make_per_hub_cpumask(struct bau_control *hmaster)
+{
+	int sz = sizeof(cpumask_t);
+
+	hmaster->cpumask = kzalloc_node(sz, GFP_KERNEL, hmaster->osnode);
+}
+
+/*
  * Initialize all the per_cpu information for the cpu's on a given socket,
  * given what has been gathered into the socket_desc struct.
  * And reports the chosen hub and socket masters back to the caller.
@@ -1751,11 +1767,12 @@ static int __init summarize_uvhub_sockets(int nuvhubs,
 				sdp = &bdp->socket[socket];
 				if (scan_sock(sdp, bdp, &smaster, &hmaster))
 					return 1;
+				make_per_cpu_thp(smaster);
 			}
 			socket++;
 			socket_mask = (socket_mask >> 1);
-			make_per_cpu_thp(smaster);
 		}
+		make_per_hub_cpumask(hmaster);
 	}
 	return 0;
 }
@@ -1777,15 +1794,20 @@ static int __init init_per_cpu(int nuvhubs, int base_part_pnode)
 	uvhub_mask = kzalloc((nuvhubs+7)/8, GFP_KERNEL);
 
 	if (get_cpu_topology(base_part_pnode, uvhub_descs, uvhub_mask))
-		return 1;
+		goto fail;
 
 	if (summarize_uvhub_sockets(nuvhubs, uvhub_descs, uvhub_mask))
-		return 1;
+		goto fail;
 
 	kfree(uvhub_descs);
 	kfree(uvhub_mask);
 	init_per_cpu_tunables();
 	return 0;
+
+fail:
+	kfree(uvhub_descs);
+	kfree(uvhub_mask);
+	return 1;
 }
 
 /*
@@ -1812,8 +1834,6 @@ static int __init uv_bau_init(void)
 		zalloc_cpumask_var_node(mask, GFP_KERNEL, cpu_to_node(cur_cpu));
 	}
 
-	uv_nshift = uv_hub_info->m_val;
-	uv_mmask = (1UL << uv_hub_info->m_val) - 1;
 	nuvhubs = uv_num_possible_blades();
 	spin_lock_init(&disable_lock);
 	congested_cycles = usec_2_cycles(congested_respns_us);