summaryrefslogtreecommitdiffstats
path: root/arch/x86/xen/xen-asm_32.S
diff options
context:
space:
mode:
authorJeremy Fitzhardinge <jeremy@goop.org>2008-07-08 15:06:46 -0700
committerIngo Molnar <mingo@elte.hu>2008-07-16 10:59:09 +0200
commitcdacc1278b12d929f9a053c245ff3d16eb7af9f8 (patch)
tree50b4c6f550e24570752befae4b51db8659a017a0 /arch/x86/xen/xen-asm_32.S
parent555cf2b5805a213ba262a2830c4d22ad635a249e (diff)
xen64: add 64-bit assembler
Split xen-asm into 32- and 64-bit files, and implement the 64-bit variants. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: Stephen Tweedie <sct@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
Diffstat (limited to 'arch/x86/xen/xen-asm_32.S')
-rw-r--r--arch/x86/xen/xen-asm_32.S305
1 files changed, 305 insertions, 0 deletions
diff --git a/arch/x86/xen/xen-asm_32.S b/arch/x86/xen/xen-asm_32.S
new file mode 100644
index 00000000000..2497a30f41d
--- /dev/null
+++ b/arch/x86/xen/xen-asm_32.S
@@ -0,0 +1,305 @@
+/*
+ Asm versions of Xen pv-ops, suitable for either direct use or inlining.
+ The inline versions are the same as the direct-use versions, with the
+ pre- and post-amble chopped off.
+
+ This code is encoded for size rather than absolute efficiency,
+ with a view to being able to inline as much as possible.
+
+ We only bother with direct forms (ie, vcpu in pda) of the operations
+ here; the indirect forms are better handled in C, since they're
+ generally too large to inline anyway.
+ */
+
+#include <linux/linkage.h>
+
+#include <asm/asm-offsets.h>
+#include <asm/thread_info.h>
+#include <asm/percpu.h>
+#include <asm/processor-flags.h>
+#include <asm/segment.h>
+
+#include <xen/interface/xen.h>
+
+#define RELOC(x, v) .globl x##_reloc; x##_reloc=v
+#define ENDPATCH(x) .globl x##_end; x##_end=.
+
+/* Pseudo-flag used for virtual NMI, which we don't implement yet */
+#define XEN_EFLAGS_NMI 0x80000000
+
+/*
+ Enable events. This clears the event mask and tests the pending
+ event status with one and operation. If there are pending
+ events, then enter the hypervisor to get them handled.
+ */
+ENTRY(xen_irq_enable_direct)
+ /* Unmask events */
+ movb $0, PER_CPU_VAR(xen_vcpu_info)+XEN_vcpu_info_mask
+
+ /* Preempt here doesn't matter because that will deal with
+ any pending interrupts. The pending check may end up being
+ run on the wrong CPU, but that doesn't hurt. */
+
+ /* Test for pending */
+ testb $0xff, PER_CPU_VAR(xen_vcpu_info)+XEN_vcpu_info_pending
+ jz 1f
+
+2: call check_events
+1:
+ENDPATCH(xen_irq_enable_direct)
+ ret
+ ENDPROC(xen_irq_enable_direct)
+ RELOC(xen_irq_enable_direct, 2b+1)
+
+
+/*
+ Disabling events is simply a matter of making the event mask
+ non-zero.
+ */
+ENTRY(xen_irq_disable_direct)
+ movb $1, PER_CPU_VAR(xen_vcpu_info)+XEN_vcpu_info_mask
+ENDPATCH(xen_irq_disable_direct)
+ ret
+ ENDPROC(xen_irq_disable_direct)
+ RELOC(xen_irq_disable_direct, 0)
+
+/*
+ (xen_)save_fl is used to get the current interrupt enable status.
+ Callers expect the status to be in X86_EFLAGS_IF, and other bits
+ may be set in the return value. We take advantage of this by
+ making sure that X86_EFLAGS_IF has the right value (and other bits
+ in that byte are 0), but other bits in the return value are
+ undefined. We need to toggle the state of the bit, because
+ Xen and x86 use opposite senses (mask vs enable).
+ */
+ENTRY(xen_save_fl_direct)
+ testb $0xff, PER_CPU_VAR(xen_vcpu_info)+XEN_vcpu_info_mask
+ setz %ah
+ addb %ah,%ah
+ENDPATCH(xen_save_fl_direct)
+ ret
+ ENDPROC(xen_save_fl_direct)
+ RELOC(xen_save_fl_direct, 0)
+
+
+/*
+ In principle the caller should be passing us a value return
+ from xen_save_fl_direct, but for robustness sake we test only
+ the X86_EFLAGS_IF flag rather than the whole byte. After
+ setting the interrupt mask state, it checks for unmasked
+ pending events and enters the hypervisor to get them delivered
+ if so.
+ */
+ENTRY(xen_restore_fl_direct)
+ testb $X86_EFLAGS_IF>>8, %ah
+ setz PER_CPU_VAR(xen_vcpu_info)+XEN_vcpu_info_mask
+ /* Preempt here doesn't matter because that will deal with
+ any pending interrupts. The pending check may end up being
+ run on the wrong CPU, but that doesn't hurt. */
+
+ /* check for unmasked and pending */
+ cmpw $0x0001, PER_CPU_VAR(xen_vcpu_info)+XEN_vcpu_info_pending
+ jz 1f
+2: call check_events
+1:
+ENDPATCH(xen_restore_fl_direct)
+ ret
+ ENDPROC(xen_restore_fl_direct)
+ RELOC(xen_restore_fl_direct, 2b+1)
+
+/*
+ We can't use sysexit directly, because we're not running in ring0.
+ But we can easily fake it up using iret. Assuming xen_sysexit
+ is jumped to with a standard stack frame, we can just strip it
+ back to a standard iret frame and use iret.
+ */
+ENTRY(xen_sysexit)
+ movl PT_EAX(%esp), %eax /* Shouldn't be necessary? */
+ orl $X86_EFLAGS_IF, PT_EFLAGS(%esp)
+ lea PT_EIP(%esp), %esp
+
+ jmp xen_iret
+ENDPROC(xen_sysexit)
+
+/*
+ This is run where a normal iret would be run, with the same stack setup:
+ 8: eflags
+ 4: cs
+ esp-> 0: eip
+
+ This attempts to make sure that any pending events are dealt
+ with on return to usermode, but there is a small window in
+ which an event can happen just before entering usermode. If
+ the nested interrupt ends up setting one of the TIF_WORK_MASK
+ pending work flags, they will not be tested again before
+ returning to usermode. This means that a process can end up
+ with pending work, which will be unprocessed until the process
+ enters and leaves the kernel again, which could be an
+ unbounded amount of time. This means that a pending signal or
+ reschedule event could be indefinitely delayed.
+
+ The fix is to notice a nested interrupt in the critical
+ window, and if one occurs, then fold the nested interrupt into
+ the current interrupt stack frame, and re-process it
+ iteratively rather than recursively. This means that it will
+ exit via the normal path, and all pending work will be dealt
+ with appropriately.
+
+ Because the nested interrupt handler needs to deal with the
+ current stack state in whatever form its in, we keep things
+ simple by only using a single register which is pushed/popped
+ on the stack.
+ */
+ENTRY(xen_iret)
+ /* test eflags for special cases */
+ testl $(X86_EFLAGS_VM | XEN_EFLAGS_NMI), 8(%esp)
+ jnz hyper_iret
+
+ push %eax
+ ESP_OFFSET=4 # bytes pushed onto stack
+
+ /* Store vcpu_info pointer for easy access. Do it this
+ way to avoid having to reload %fs */
+#ifdef CONFIG_SMP
+ GET_THREAD_INFO(%eax)
+ movl TI_cpu(%eax),%eax
+ movl __per_cpu_offset(,%eax,4),%eax
+ mov per_cpu__xen_vcpu(%eax),%eax
+#else
+ movl per_cpu__xen_vcpu, %eax
+#endif
+
+ /* check IF state we're restoring */
+ testb $X86_EFLAGS_IF>>8, 8+1+ESP_OFFSET(%esp)
+
+ /* Maybe enable events. Once this happens we could get a
+ recursive event, so the critical region starts immediately
+ afterwards. However, if that happens we don't end up
+ resuming the code, so we don't have to be worried about
+ being preempted to another CPU. */
+ setz XEN_vcpu_info_mask(%eax)
+xen_iret_start_crit:
+
+ /* check for unmasked and pending */
+ cmpw $0x0001, XEN_vcpu_info_pending(%eax)
+
+ /* If there's something pending, mask events again so we
+ can jump back into xen_hypervisor_callback */
+ sete XEN_vcpu_info_mask(%eax)
+
+ popl %eax
+
+ /* From this point on the registers are restored and the stack
+ updated, so we don't need to worry about it if we're preempted */
+iret_restore_end:
+
+ /* Jump to hypervisor_callback after fixing up the stack.
+ Events are masked, so jumping out of the critical
+ region is OK. */
+ je xen_hypervisor_callback
+
+1: iret
+xen_iret_end_crit:
+.section __ex_table,"a"
+ .align 4
+ .long 1b,iret_exc
+.previous
+
+hyper_iret:
+ /* put this out of line since its very rarely used */
+ jmp hypercall_page + __HYPERVISOR_iret * 32
+
+ .globl xen_iret_start_crit, xen_iret_end_crit
+
+/*
+ This is called by xen_hypervisor_callback in entry.S when it sees
+ that the EIP at the time of interrupt was between xen_iret_start_crit
+ and xen_iret_end_crit. We're passed the EIP in %eax so we can do
+ a more refined determination of what to do.
+
+ The stack format at this point is:
+ ----------------
+ ss : (ss/esp may be present if we came from usermode)
+ esp :
+ eflags } outer exception info
+ cs }
+ eip }
+ ---------------- <- edi (copy dest)
+ eax : outer eax if it hasn't been restored
+ ----------------
+ eflags } nested exception info
+ cs } (no ss/esp because we're nested
+ eip } from the same ring)
+ orig_eax }<- esi (copy src)
+ - - - - - - - -
+ fs }
+ es }
+ ds } SAVE_ALL state
+ eax }
+ : :
+ ebx }<- esp
+ ----------------
+
+ In order to deliver the nested exception properly, we need to shift
+ everything from the return addr up to the error code so it
+ sits just under the outer exception info. This means that when we
+ handle the exception, we do it in the context of the outer exception
+ rather than starting a new one.
+
+ The only caveat is that if the outer eax hasn't been
+ restored yet (ie, it's still on stack), we need to insert
+ its value into the SAVE_ALL state before going on, since
+ it's usermode state which we eventually need to restore.
+ */
+ENTRY(xen_iret_crit_fixup)
+ /*
+ Paranoia: Make sure we're really coming from kernel space.
+ One could imagine a case where userspace jumps into the
+ critical range address, but just before the CPU delivers a GP,
+ it decides to deliver an interrupt instead. Unlikely?
+ Definitely. Easy to avoid? Yes. The Intel documents
+ explicitly say that the reported EIP for a bad jump is the
+ jump instruction itself, not the destination, but some virtual
+ environments get this wrong.
+ */
+ movl PT_CS(%esp), %ecx
+ andl $SEGMENT_RPL_MASK, %ecx
+ cmpl $USER_RPL, %ecx
+ je 2f
+
+ lea PT_ORIG_EAX(%esp), %esi
+ lea PT_EFLAGS(%esp), %edi
+
+ /* If eip is before iret_restore_end then stack
+ hasn't been restored yet. */
+ cmp $iret_restore_end, %eax
+ jae 1f
+
+ movl 0+4(%edi),%eax /* copy EAX (just above top of frame) */
+ movl %eax, PT_EAX(%esp)
+
+ lea ESP_OFFSET(%edi),%edi /* move dest up over saved regs */
+
+ /* set up the copy */
+1: std
+ mov $PT_EIP / 4, %ecx /* saved regs up to orig_eax */
+ rep movsl
+ cld
+
+ lea 4(%edi),%esp /* point esp to new frame */
+2: jmp xen_do_upcall
+
+
+/*
+ Force an event check by making a hypercall,
+ but preserve regs before making the call.
+ */
+check_events:
+ push %eax
+ push %ecx
+ push %edx
+ call force_evtchn_callback
+ pop %edx
+ pop %ecx
+ pop %eax
+ ret