diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2011-10-26 16:11:53 +0200 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2011-10-26 16:11:53 +0200 |
commit | 982653009b883ef1529089e3e6f1ae2fee41cbe2 (patch) | |
tree | eec3b1fe947d442ee204a2d648133bc5223e5c59 /arch/x86 | |
parent | 37d96c28ecf0af1215bb6bbf580dbb1fabb5a6ec (diff) | |
parent | c020570138f5d9cb1fc0a853f9cf9e641178b5c5 (diff) |
Merge branch 'core-iommu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
* 'core-iommu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86, ioapic: Consolidate the explicit EOI code
x86, ioapic: Restore the mask bit correctly in eoi_ioapic_irq()
x86, kdump, ioapic: Reset remote-IRR in clear_IO_APIC
iommu: Rename the DMAR and INTR_REMAP config options
x86, ioapic: Define irq_remap_modify_chip_defaults()
x86, msi, intr-remap: Use the ioapic set affinity routine
iommu: Cleanup ifdefs in detect_intel_iommu()
iommu: No need to set dmar_disabled in check_zero_address()
iommu: Move IOMMU specific code to intel-iommu.c
intr_remap: Call dmar_dev_scope_init() explicitly
x86, x2apic: Enable the bios request for x2apic optout
Diffstat (limited to 'arch/x86')
-rw-r--r-- | arch/x86/Kconfig | 6 | ||||
-rw-r--r-- | arch/x86/configs/x86_64_defconfig | 4 | ||||
-rw-r--r-- | arch/x86/include/asm/device.h | 2 | ||||
-rw-r--r-- | arch/x86/include/asm/hw_irq.h | 2 | ||||
-rw-r--r-- | arch/x86/include/asm/irq_remapping.h | 6 | ||||
-rw-r--r-- | arch/x86/kernel/apic/apic.c | 33 | ||||
-rw-r--r-- | arch/x86/kernel/apic/io_apic.c | 284 |
7 files changed, 166 insertions, 171 deletions
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 9a4a267a8a5..9037289617a 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -130,7 +130,7 @@ config SBUS bool config NEED_DMA_MAP_STATE - def_bool (X86_64 || DMAR || DMA_API_DEBUG) + def_bool (X86_64 || INTEL_IOMMU || DMA_API_DEBUG) config NEED_SG_DMA_LENGTH def_bool y @@ -220,7 +220,7 @@ config ARCH_SUPPORTS_DEBUG_PAGEALLOC config HAVE_INTEL_TXT def_bool y - depends on EXPERIMENTAL && DMAR && ACPI + depends on EXPERIMENTAL && INTEL_IOMMU && ACPI config X86_32_SMP def_bool y @@ -287,7 +287,7 @@ config SMP config X86_X2APIC bool "Support x2apic" - depends on X86_LOCAL_APIC && X86_64 && INTR_REMAP + depends on X86_LOCAL_APIC && X86_64 && IRQ_REMAP ---help--- This enables x2apic support on CPUs that have this feature. diff --git a/arch/x86/configs/x86_64_defconfig b/arch/x86/configs/x86_64_defconfig index 22a0dc8e51d..058a35b8286 100644 --- a/arch/x86/configs/x86_64_defconfig +++ b/arch/x86/configs/x86_64_defconfig @@ -67,8 +67,8 @@ CONFIG_CPU_FREQ_GOV_PERFORMANCE=y CONFIG_CPU_FREQ_GOV_ONDEMAND=y CONFIG_X86_ACPI_CPUFREQ=y CONFIG_PCI_MMCONFIG=y -CONFIG_DMAR=y -# CONFIG_DMAR_DEFAULT_ON is not set +CONFIG_INTEL_IOMMU=y +# CONFIG_INTEL_IOMMU_DEFAULT_ON is not set CONFIG_PCIEPORTBUS=y CONFIG_PCCARD=y CONFIG_YENTA=y diff --git a/arch/x86/include/asm/device.h b/arch/x86/include/asm/device.h index 029f230ab63..63a2a03d7d5 100644 --- a/arch/x86/include/asm/device.h +++ b/arch/x86/include/asm/device.h @@ -8,7 +8,7 @@ struct dev_archdata { #ifdef CONFIG_X86_64 struct dma_map_ops *dma_ops; #endif -#if defined(CONFIG_DMAR) || defined(CONFIG_AMD_IOMMU) +#if defined(CONFIG_INTEL_IOMMU) || defined(CONFIG_AMD_IOMMU) void *iommu; /* hook for IOMMU specific extension */ #endif }; diff --git a/arch/x86/include/asm/hw_irq.h b/arch/x86/include/asm/hw_irq.h index 09199052060..eb92a6ed2be 100644 --- a/arch/x86/include/asm/hw_irq.h +++ b/arch/x86/include/asm/hw_irq.h @@ -119,7 +119,7 @@ struct irq_cfg { cpumask_var_t old_domain; u8 vector; u8 move_in_progress : 1; -#ifdef CONFIG_INTR_REMAP +#ifdef CONFIG_IRQ_REMAP struct irq_2_iommu irq_2_iommu; #endif }; diff --git a/arch/x86/include/asm/irq_remapping.h b/arch/x86/include/asm/irq_remapping.h index 1c23360fb2d..47d99934580 100644 --- a/arch/x86/include/asm/irq_remapping.h +++ b/arch/x86/include/asm/irq_remapping.h @@ -3,7 +3,8 @@ #define IRTE_DEST(dest) ((x2apic_mode) ? dest : dest << 8) -#ifdef CONFIG_INTR_REMAP +#ifdef CONFIG_IRQ_REMAP +static void irq_remap_modify_chip_defaults(struct irq_chip *chip); static inline void prepare_irte(struct irte *irte, int vector, unsigned int dest) { @@ -36,6 +37,9 @@ static inline bool irq_remapped(struct irq_cfg *cfg) { return false; } +static inline void irq_remap_modify_chip_defaults(struct irq_chip *chip) +{ +} #endif #endif /* _ASM_X86_IRQ_REMAPPING_H */ diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c index 52fa56399a5..a2fd72e0ab3 100644 --- a/arch/x86/kernel/apic/apic.c +++ b/arch/x86/kernel/apic/apic.c @@ -1437,27 +1437,21 @@ void enable_x2apic(void) int __init enable_IR(void) { -#ifdef CONFIG_INTR_REMAP +#ifdef CONFIG_IRQ_REMAP if (!intr_remapping_supported()) { pr_debug("intr-remapping not supported\n"); - return 0; + return -1; } if (!x2apic_preenabled && skip_ioapic_setup) { pr_info("Skipped enabling intr-remap because of skipping " "io-apic setup\n"); - return 0; + return -1; } - if (enable_intr_remapping(x2apic_supported())) - return 0; - - pr_info("Enabled Interrupt-remapping\n"); - - return 1; - + return enable_intr_remapping(); #endif - return 0; + return -1; } void __init enable_IR_x2apic(void) @@ -1481,11 +1475,11 @@ void __init enable_IR_x2apic(void) mask_ioapic_entries(); if (dmar_table_init_ret) - ret = 0; + ret = -1; else ret = enable_IR(); - if (!ret) { + if (ret < 0) { /* IR is required if there is APIC ID > 255 even when running * under KVM */ @@ -1499,6 +1493,9 @@ void __init enable_IR_x2apic(void) x2apic_force_phys(); } + if (ret == IRQ_REMAP_XAPIC_MODE) + goto nox2apic; + x2apic_enabled = 1; if (x2apic_supported() && !x2apic_mode) { @@ -1508,19 +1505,21 @@ void __init enable_IR_x2apic(void) } nox2apic: - if (!ret) /* IR enabling failed */ + if (ret < 0) /* IR enabling failed */ restore_ioapic_entries(); legacy_pic->restore_mask(); local_irq_restore(flags); out: - if (x2apic_enabled) + if (x2apic_enabled || !x2apic_supported()) return; if (x2apic_preenabled) panic("x2apic: enabled by BIOS but kernel init failed."); - else if (cpu_has_x2apic) - pr_info("Not enabling x2apic, Intr-remapping init failed.\n"); + else if (ret == IRQ_REMAP_XAPIC_MODE) + pr_info("x2apic not enabled, IRQ remapping is in xapic mode\n"); + else if (ret < 0) + pr_info("x2apic not enabled, IRQ remapping init failed\n"); } #ifdef CONFIG_X86_64 diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index 8eb863e27ea..229e19f3eb5 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -394,13 +394,21 @@ union entry_union { struct IO_APIC_route_entry entry; }; +static struct IO_APIC_route_entry __ioapic_read_entry(int apic, int pin) +{ + union entry_union eu; + + eu.w1 = io_apic_read(apic, 0x10 + 2 * pin); + eu.w2 = io_apic_read(apic, 0x11 + 2 * pin); + return eu.entry; +} + static struct IO_APIC_route_entry ioapic_read_entry(int apic, int pin) { union entry_union eu; unsigned long flags; raw_spin_lock_irqsave(&ioapic_lock, flags); - eu.w1 = io_apic_read(apic, 0x10 + 2 * pin); - eu.w2 = io_apic_read(apic, 0x11 + 2 * pin); + eu.entry = __ioapic_read_entry(apic, pin); raw_spin_unlock_irqrestore(&ioapic_lock, flags); return eu.entry; } @@ -529,18 +537,6 @@ static void io_apic_modify_irq(struct irq_cfg *cfg, __io_apic_modify_irq(entry, mask_and, mask_or, final); } -static void __mask_and_edge_IO_APIC_irq(struct irq_pin_list *entry) -{ - __io_apic_modify_irq(entry, ~IO_APIC_REDIR_LEVEL_TRIGGER, - IO_APIC_REDIR_MASKED, NULL); -} - -static void __unmask_and_level_IO_APIC_irq(struct irq_pin_list *entry) -{ - __io_apic_modify_irq(entry, ~IO_APIC_REDIR_MASKED, - IO_APIC_REDIR_LEVEL_TRIGGER, NULL); -} - static void io_apic_sync(struct irq_pin_list *entry) { /* @@ -585,6 +581,66 @@ static void unmask_ioapic_irq(struct irq_data *data) unmask_ioapic(data->chip_data); } +/* + * IO-APIC versions below 0x20 don't support EOI register. + * For the record, here is the information about various versions: + * 0Xh 82489DX + * 1Xh I/OAPIC or I/O(x)APIC which are not PCI 2.2 Compliant + * 2Xh I/O(x)APIC which is PCI 2.2 Compliant + * 30h-FFh Reserved + * + * Some of the Intel ICH Specs (ICH2 to ICH5) documents the io-apic + * version as 0x2. This is an error with documentation and these ICH chips + * use io-apic's of version 0x20. + * + * For IO-APIC's with EOI register, we use that to do an explicit EOI. + * Otherwise, we simulate the EOI message manually by changing the trigger + * mode to edge and then back to level, with RTE being masked during this. + */ +static void __eoi_ioapic_pin(int apic, int pin, int vector, struct irq_cfg *cfg) +{ + if (mpc_ioapic_ver(apic) >= 0x20) { + /* + * Intr-remapping uses pin number as the virtual vector + * in the RTE. Actual vector is programmed in + * intr-remapping table entry. Hence for the io-apic + * EOI we use the pin number. + */ + if (cfg && irq_remapped(cfg)) + io_apic_eoi(apic, pin); + else + io_apic_eoi(apic, vector); + } else { + struct IO_APIC_route_entry entry, entry1; + + entry = entry1 = __ioapic_read_entry(apic, pin); + + /* + * Mask the entry and change the trigger mode to edge. + */ + entry1.mask = 1; + entry1.trigger = IOAPIC_EDGE; + + __ioapic_write_entry(apic, pin, entry1); + + /* + * Restore the previous level triggered entry. + */ + __ioapic_write_entry(apic, pin, entry); + } +} + +static void eoi_ioapic_irq(unsigned int irq, struct irq_cfg *cfg) +{ + struct irq_pin_list *entry; + unsigned long flags; + + raw_spin_lock_irqsave(&ioapic_lock, flags); + for_each_irq_pin(entry, cfg->irq_2_pin) + __eoi_ioapic_pin(entry->apic, entry->pin, cfg->vector, cfg); + raw_spin_unlock_irqrestore(&ioapic_lock, flags); +} + static void clear_IO_APIC_pin(unsigned int apic, unsigned int pin) { struct IO_APIC_route_entry entry; @@ -593,10 +649,44 @@ static void clear_IO_APIC_pin(unsigned int apic, unsigned int pin) entry = ioapic_read_entry(apic, pin); if (entry.delivery_mode == dest_SMI) return; + + /* + * Make sure the entry is masked and re-read the contents to check + * if it is a level triggered pin and if the remote-IRR is set. + */ + if (!entry.mask) { + entry.mask = 1; + ioapic_write_entry(apic, pin, entry); + entry = ioapic_read_entry(apic, pin); + } + + if (entry.irr) { + unsigned long flags; + + /* + * Make sure the trigger mode is set to level. Explicit EOI + * doesn't clear the remote-IRR if the trigger mode is not + * set to level. + */ + if (!entry.trigger) { + entry.trigger = IOAPIC_LEVEL; + ioapic_write_entry(apic, pin, entry); + } + + raw_spin_lock_irqsave(&ioapic_lock, flags); + __eoi_ioapic_pin(apic, pin, entry.vector, NULL); + raw_spin_unlock_irqrestore(&ioapic_lock, flags); + } + /* - * Disable it in the IO-APIC irq-routing table: + * Clear the rest of the bits in the IO-APIC RTE except for the mask + * bit. */ ioapic_mask_entry(apic, pin); + entry = ioapic_read_entry(apic, pin); + if (entry.irr) + printk(KERN_ERR "Unable to reset IRR for apic: %d, pin :%d\n", + mpc_ioapic_id(apic), pin); } static void clear_IO_APIC (void) @@ -1202,7 +1292,6 @@ void __setup_vector_irq(int cpu) } static struct irq_chip ioapic_chip; -static struct irq_chip ir_ioapic_chip; #ifdef CONFIG_X86_32 static inline int IO_APIC_irq_trigger(int irq) @@ -1246,7 +1335,7 @@ static void ioapic_register_intr(unsigned int irq, struct irq_cfg *cfg, if (irq_remapped(cfg)) { irq_set_status_flags(irq, IRQ_MOVE_PCNTXT); - chip = &ir_ioapic_chip; + irq_remap_modify_chip_defaults(chip); fasteoi = trigger != 0; } @@ -2255,7 +2344,7 @@ ioapic_set_affinity(struct irq_data *data, const struct cpumask *mask, return ret; } -#ifdef CONFIG_INTR_REMAP +#ifdef CONFIG_IRQ_REMAP /* * Migrate the IO-APIC irq in the presence of intr-remapping. @@ -2267,6 +2356,9 @@ ioapic_set_affinity(struct irq_data *data, const struct cpumask *mask, * updated vector information), by using a virtual vector (io-apic pin number). * Real vector that is used for interrupting cpu will be coming from * the interrupt-remapping table entry. + * + * As the migration is a simple atomic update of IRTE, the same mechanism + * is used to migrate MSI irq's in the presence of interrupt-remapping. */ static int ir_ioapic_set_affinity(struct irq_data *data, const struct cpumask *mask, @@ -2291,10 +2383,16 @@ ir_ioapic_set_affinity(struct irq_data *data, const struct cpumask *mask, irte.dest_id = IRTE_DEST(dest); /* - * Modified the IRTE and flushes the Interrupt entry cache. + * Atomically updates the IRTE with the new destination, vector + * and flushes the interrupt entry cache. */ modify_irte(irq, &irte); + /* + * After this point, all the interrupts will start arriving + * at the new destination. So, time to cleanup the previous + * vector allocation. + */ if (cfg->move_in_progress) send_cleanup_vector(cfg); @@ -2407,48 +2505,6 @@ static void ack_apic_edge(struct irq_data *data) atomic_t irq_mis_count; -/* - * IO-APIC versions below 0x20 don't support EOI register. - * For the record, here is the information about various versions: - * 0Xh 82489DX - * 1Xh I/OAPIC or I/O(x)APIC which are not PCI 2.2 Compliant - * 2Xh I/O(x)APIC which is PCI 2.2 Compliant - * 30h-FFh Reserved - * - * Some of the Intel ICH Specs (ICH2 to ICH5) documents the io-apic - * version as 0x2. This is an error with documentation and these ICH chips - * use io-apic's of version 0x20. - * - * For IO-APIC's with EOI register, we use that to do an explicit EOI. - * Otherwise, we simulate the EOI message manually by changing the trigger - * mode to edge and then back to level, with RTE being masked during this. -*/ -static void eoi_ioapic_irq(unsigned int irq, struct irq_cfg *cfg) -{ - struct irq_pin_list *entry; - unsigned long flags; - - raw_spin_lock_irqsave(&ioapic_lock, flags); - for_each_irq_pin(entry, cfg->irq_2_pin) { - if (mpc_ioapic_ver(entry->apic) >= 0x20) { - /* - * Intr-remapping uses pin number as the virtual vector - * in the RTE. Actual vector is programmed in - * intr-remapping table entry. Hence for the io-apic - * EOI we use the pin number. - */ - if (irq_remapped(cfg)) - io_apic_eoi(entry->apic, entry->pin); - else - io_apic_eoi(entry->apic, cfg->vector); - } else { - __mask_and_edge_IO_APIC_irq(entry); - __unmask_and_level_IO_APIC_irq(entry); - } - } - raw_spin_unlock_irqrestore(&ioapic_lock, flags); -} - static void ack_apic_level(struct irq_data *data) { struct irq_cfg *cfg = data->chip_data; @@ -2552,7 +2608,7 @@ static void ack_apic_level(struct irq_data *data) } } -#ifdef CONFIG_INTR_REMAP +#ifdef CONFIG_IRQ_REMAP static void ir_ack_apic_edge(struct irq_data *data) { ack_APIC_irq(); @@ -2563,7 +2619,23 @@ static void ir_ack_apic_level(struct irq_data *data) ack_APIC_irq(); eoi_ioapic_irq(data->irq, data->chip_data); } -#endif /* CONFIG_INTR_REMAP */ + +static void ir_print_prefix(struct irq_data *data, struct seq_file *p) +{ + seq_printf(p, " IR-%s", data->chip->name); +} + +static void irq_remap_modify_chip_defaults(struct irq_chip *chip) +{ + chip->irq_print_chip = ir_print_prefix; + chip->irq_ack = ir_ack_apic_edge; + chip->irq_eoi = ir_ack_apic_level; + +#ifdef CONFIG_SMP + chip->irq_set_affinity = ir_ioapic_set_affinity; +#endif +} +#endif /* CONFIG_IRQ_REMAP */ static struct irq_chip ioapic_chip __read_mostly = { .name = "IO-APIC", @@ -2578,21 +2650,6 @@ static struct irq_chip ioapic_chip __read_mostly = { .irq_retrigger = ioapic_retrigger_irq, }; -static struct irq_chip ir_ioapic_chip __read_mostly = { - .name = "IR-IO-APIC", - .irq_startup = startup_ioapic_irq, - .irq_mask = mask_ioapic_irq, - .irq_unmask = unmask_ioapic_irq, -#ifdef CONFIG_INTR_REMAP - .irq_ack = ir_ack_apic_edge, - .irq_eoi = ir_ack_apic_level, -#ifdef CONFIG_SMP - .irq_set_affinity = ir_ioapic_set_affinity, -#endif -#endif - .irq_retrigger = ioapic_retrigger_irq, -}; - static inline void init_IO_APIC_traps(void) { struct irq_cfg *cfg; @@ -3144,45 +3201,6 @@ msi_set_affinity(struct irq_data *data, const struct cpumask *mask, bool force) return 0; } -#ifdef CONFIG_INTR_REMAP -/* - * Migrate the MSI irq to another cpumask. This migration is - * done in the process context using interrupt-remapping hardware. - */ -static int -ir_msi_set_affinity(struct irq_data *data, const struct cpumask *mask, - bool force) -{ - struct irq_cfg *cfg = data->chip_data; - unsigned int dest, irq = data->irq; - struct irte irte; - - if (get_irte(irq, &irte)) - return -1; - - if (__ioapic_set_affinity(data, mask, &dest)) - return -1; - - irte.vector = cfg->vector; - irte.dest_id = IRTE_DEST(dest); - - /* - * atomically update the IRTE with the new destination and vector. - */ - modify_irte(irq, &irte); - - /* - * After this point, all the interrupts will start arriving - * at the new destination. So, time to cleanup the previous - * vector allocation. - */ - if (cfg->move_in_progress) - send_cleanup_vector(cfg); - - return 0; -} - -#endif #endif /* CONFIG_SMP */ /* @@ -3200,19 +3218,6 @@ static struct irq_chip msi_chip = { .irq_retrigger = ioapic_retrigger_irq, }; -static struct irq_chip msi_ir_chip = { - .name = "IR-PCI-MSI", - .irq_unmask = unmask_msi_irq, - .irq_mask = mask_msi_irq, -#ifdef CONFIG_INTR_REMAP - .irq_ack = ir_ack_apic_edge, -#ifdef CONFIG_SMP - .irq_set_affinity = ir_msi_set_affinity, -#endif -#endif - .irq_retrigger = ioapic_retrigger_irq, -}; - /* * Map the PCI dev to the corresponding remapping hardware unit * and allocate 'nvec' consecutive interrupt-remapping table entries @@ -3255,7 +3260,7 @@ static int setup_msi_irq(struct pci_dev *dev, struct msi_desc *msidesc, int irq) if (irq_remapped(irq_get_chip_data(irq))) { irq_set_status_flags(irq, IRQ_MOVE_PCNTXT); - chip = &msi_ir_chip; + irq_remap_modify_chip_defaults(chip); } irq_set_chip_and_handler_name(irq, chip, handle_edge_irq, "edge"); @@ -3328,7 +3333,7 @@ void native_teardown_msi_irq(unsigned int irq) destroy_irq(irq); } -#if defined (CONFIG_DMAR) || defined (CONFIG_INTR_REMAP) +#ifdef CONFIG_DMAR_TABLE #ifdef CONFIG_SMP static int dmar_msi_set_affinity(struct irq_data *data, const struct cpumask *mask, @@ -3409,19 +3414,6 @@ static int hpet_msi_set_affinity(struct irq_data *data, #endif /* CONFIG_SMP */ -static struct irq_chip ir_hpet_msi_type = { - .name = "IR-HPET_MSI", - .irq_unmask = hpet_msi_unmask, - .irq_mask = hpet_msi_mask, -#ifdef CONFIG_INTR_REMAP - .irq_ack = ir_ack_apic_edge, -#ifdef CONFIG_SMP - .irq_set_affinity = ir_msi_set_affinity, -#endif -#endif - .irq_retrigger = ioapic_retrigger_irq, -}; - static struct irq_chip hpet_msi_type = { .name = "HPET_MSI", .irq_unmask = hpet_msi_unmask, @@ -3458,7 +3450,7 @@ int arch_setup_hpet_msi(unsigned int irq, unsigned int id) hpet_msi_write(irq_get_handler_data(irq), &msg); irq_set_status_flags(irq, IRQ_MOVE_PCNTXT); if (irq_remapped(irq_get_chip_data(irq))) - chip = &ir_hpet_msi_type; + irq_remap_modify_chip_defaults(chip); irq_set_chip_and_handler_name(irq, chip, handle_edge_irq, "edge"); return 0; |