Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 920 insertions, 0 deletions

diff --git a/arch/x86_64/kernel/entry.S b/arch/x86_64/kernel/entry.S
new file mode 100644
index 00000000000..e126284db7a
--- /dev/null
+++ b/arch/x86_64/kernel/entry.S
@@ -0,0 +1,920 @@
+/*
+ *  linux/arch/x86_64/entry.S
+ *
+ *  Copyright (C) 1991, 1992  Linus Torvalds
+ *  Copyright (C) 2000, 2001, 2002  Andi Kleen SuSE Labs
+ *  Copyright (C) 2000  Pavel Machek <pavel@suse.cz>
+ * 
+ *  $Id$
+ */
+
+/*
+ * entry.S contains the system-call and fault low-level handling routines.
+ *
+ * NOTE: This code handles signal-recognition, which happens every time
+ * after an interrupt and after each system call.
+ * 
+ * Normal syscalls and interrupts don't save a full stack frame, this is 
+ * only done for syscall tracing, signals or fork/exec et.al.
+ * 
+ * A note on terminology:	 
+ * - top of stack: Architecture defined interrupt frame from SS to RIP 
+ * at the top of the kernel process stack.	
+ * - partial stack frame: partially saved registers upto R11.
+ * - full stack frame: Like partial stack frame, but all register saved. 
+ *	
+ * TODO:	 
+ * - schedule it carefully for the final hardware.
+ */
+
+#define ASSEMBLY 1
+#include <linux/config.h>
+#include <linux/linkage.h>
+#include <asm/segment.h>
+#include <asm/smp.h>
+#include <asm/cache.h>
+#include <asm/errno.h>
+#include <asm/dwarf2.h>
+#include <asm/calling.h>
+#include <asm/offset.h>
+#include <asm/msr.h>
+#include <asm/unistd.h>
+#include <asm/thread_info.h>
+#include <asm/hw_irq.h>
+
+	.code64
+
+#ifdef CONFIG_PREEMPT
+#define preempt_stop cli
+#else
+#define preempt_stop
+#define retint_kernel retint_restore_args
+#endif	
+	
+/*
+ * C code is not supposed to know about undefined top of stack. Every time 
+ * a C function with an pt_regs argument is called from the SYSCALL based 
+ * fast path FIXUP_TOP_OF_STACK is needed.
+ * RESTORE_TOP_OF_STACK syncs the syscall state after any possible ptregs
+ * manipulation.
+ */        	
+		
+	/* %rsp:at FRAMEEND */ 
+	.macro FIXUP_TOP_OF_STACK tmp
+	movq	%gs:pda_oldrsp,\tmp
+	movq  	\tmp,RSP(%rsp)
+	movq    $__USER_DS,SS(%rsp)
+	movq    $__USER_CS,CS(%rsp)
+	movq 	$-1,RCX(%rsp)
+	movq	R11(%rsp),\tmp  /* get eflags */
+	movq	\tmp,EFLAGS(%rsp)
+	.endm
+
+	.macro RESTORE_TOP_OF_STACK tmp,offset=0
+	movq   RSP-\offset(%rsp),\tmp
+	movq   \tmp,%gs:pda_oldrsp
+	movq   EFLAGS-\offset(%rsp),\tmp
+	movq   \tmp,R11-\offset(%rsp)
+	.endm
+
+	.macro FAKE_STACK_FRAME child_rip
+	/* push in order ss, rsp, eflags, cs, rip */
+	xorq %rax, %rax
+	pushq %rax /* ss */
+	CFI_ADJUST_CFA_OFFSET	8
+	pushq %rax /* rsp */
+	CFI_ADJUST_CFA_OFFSET	8
+	CFI_OFFSET	rip,0
+	pushq $(1<<9) /* eflags - interrupts on */
+	CFI_ADJUST_CFA_OFFSET	8
+	pushq $__KERNEL_CS /* cs */
+	CFI_ADJUST_CFA_OFFSET	8
+	pushq \child_rip /* rip */
+	CFI_ADJUST_CFA_OFFSET	8
+	CFI_OFFSET	rip,0
+	pushq	%rax /* orig rax */
+	CFI_ADJUST_CFA_OFFSET	8
+	.endm
+
+	.macro UNFAKE_STACK_FRAME
+	addq $8*6, %rsp
+	CFI_ADJUST_CFA_OFFSET	-(6*8)
+	.endm
+
+	.macro	CFI_DEFAULT_STACK
+	CFI_ADJUST_CFA_OFFSET  (SS)
+	CFI_OFFSET	r15,R15-SS
+	CFI_OFFSET	r14,R14-SS
+	CFI_OFFSET	r13,R13-SS
+	CFI_OFFSET	r12,R12-SS
+	CFI_OFFSET	rbp,RBP-SS
+	CFI_OFFSET	rbx,RBX-SS
+	CFI_OFFSET	r11,R11-SS
+	CFI_OFFSET	r10,R10-SS
+	CFI_OFFSET	r9,R9-SS
+	CFI_OFFSET	r8,R8-SS
+	CFI_OFFSET	rax,RAX-SS
+	CFI_OFFSET	rcx,RCX-SS
+	CFI_OFFSET	rdx,RDX-SS
+	CFI_OFFSET	rsi,RSI-SS
+	CFI_OFFSET	rdi,RDI-SS
+	CFI_OFFSET	rsp,RSP-SS
+	CFI_OFFSET	rip,RIP-SS
+	.endm
+/*
+ * A newly forked process directly context switches into this.
+ */ 	
+/* rdi:	prev */	
+ENTRY(ret_from_fork)
+	CFI_STARTPROC
+	CFI_DEFAULT_STACK
+	call schedule_tail
+	GET_THREAD_INFO(%rcx)
+	testl $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT),threadinfo_flags(%rcx)
+	jnz rff_trace
+rff_action:	
+	RESTORE_REST
+	testl $3,CS-ARGOFFSET(%rsp)	# from kernel_thread?
+	je   int_ret_from_sys_call
+	testl $_TIF_IA32,threadinfo_flags(%rcx)
+	jnz  int_ret_from_sys_call
+	RESTORE_TOP_OF_STACK %rdi,ARGOFFSET
+	jmp ret_from_sys_call
+rff_trace:
+	movq %rsp,%rdi
+	call syscall_trace_leave
+	GET_THREAD_INFO(%rcx)	
+	jmp rff_action
+	CFI_ENDPROC
+
+/*
+ * System call entry. Upto 6 arguments in registers are supported.
+ *
+ * SYSCALL does not save anything on the stack and does not change the
+ * stack pointer.
+ */
+		
+/*
+ * Register setup:	
+ * rax  system call number
+ * rdi  arg0
+ * rcx  return address for syscall/sysret, C arg3 
+ * rsi  arg1
+ * rdx  arg2	
+ * r10  arg3 	(--> moved to rcx for C)
+ * r8   arg4
+ * r9   arg5
+ * r11  eflags for syscall/sysret, temporary for C
+ * r12-r15,rbp,rbx saved by C code, not touched. 		
+ * 
+ * Interrupts are off on entry.
+ * Only called from user space.
+ *
+ * XXX	if we had a free scratch register we could save the RSP into the stack frame
+ *      and report it properly in ps. Unfortunately we haven't.
+ */ 			 		
+
+ENTRY(system_call)
+	CFI_STARTPROC
+	swapgs
+	movq	%rsp,%gs:pda_oldrsp 
+	movq	%gs:pda_kernelstack,%rsp
+	sti					
+	SAVE_ARGS 8,1
+	movq  %rax,ORIG_RAX-ARGOFFSET(%rsp) 
+	movq  %rcx,RIP-ARGOFFSET(%rsp)  
+	GET_THREAD_INFO(%rcx)
+	testl $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SECCOMP),threadinfo_flags(%rcx)
+	jnz tracesys
+	cmpq $__NR_syscall_max,%rax
+	ja badsys
+	movq %r10,%rcx
+	call *sys_call_table(,%rax,8)  # XXX:	 rip relative
+	movq %rax,RAX-ARGOFFSET(%rsp)
+/*
+ * Syscall return path ending with SYSRET (fast path)
+ * Has incomplete stack frame and undefined top of stack. 
+ */		
+	.globl ret_from_sys_call
+ret_from_sys_call:
+	movl $_TIF_WORK_MASK,%edi
+	/* edi:	flagmask */
+sysret_check:		
+	GET_THREAD_INFO(%rcx)
+	cli
+	movl threadinfo_flags(%rcx),%edx
+	andl %edi,%edx
+	jnz  sysret_careful 
+	movq RIP-ARGOFFSET(%rsp),%rcx
+	RESTORE_ARGS 0,-ARG_SKIP,1
+	movq	%gs:pda_oldrsp,%rsp
+	swapgs
+	sysretq
+
+	/* Handle reschedules */
+	/* edx:	work, edi: workmask */	
+sysret_careful:
+	bt $TIF_NEED_RESCHED,%edx
+	jnc sysret_signal
+	sti
+	pushq %rdi
+	call schedule
+	popq  %rdi
+	jmp sysret_check
+
+	/* Handle a signal */ 
+sysret_signal:
+	sti
+	testl $(_TIF_SIGPENDING|_TIF_NOTIFY_RESUME|_TIF_SINGLESTEP),%edx
+	jz    1f
+
+	/* Really a signal */
+	/* edx:	work flags (arg3) */
+	leaq do_notify_resume(%rip),%rax
+	leaq -ARGOFFSET(%rsp),%rdi # &pt_regs -> arg1
+	xorl %esi,%esi # oldset -> arg2
+	call ptregscall_common
+1:	movl $_TIF_NEED_RESCHED,%edi
+	jmp sysret_check
+	
+	/* Do syscall tracing */
+tracesys:			 
+	SAVE_REST
+	movq $-ENOSYS,RAX(%rsp)
+	FIXUP_TOP_OF_STACK %rdi
+	movq %rsp,%rdi
+	call syscall_trace_enter
+	LOAD_ARGS ARGOFFSET  /* reload args from stack in case ptrace changed it */
+	RESTORE_REST
+	cmpq $__NR_syscall_max,%rax
+	ja  1f
+	movq %r10,%rcx	/* fixup for C */
+	call *sys_call_table(,%rax,8)
+	movq %rax,RAX-ARGOFFSET(%rsp)
+1:	SAVE_REST
+	movq %rsp,%rdi
+	call syscall_trace_leave
+	RESTORE_TOP_OF_STACK %rbx
+	RESTORE_REST
+	jmp ret_from_sys_call
+		
+badsys:
+	movq $-ENOSYS,RAX-ARGOFFSET(%rsp)	
+	jmp ret_from_sys_call
+
+/* 
+ * Syscall return path ending with IRET.
+ * Has correct top of stack, but partial stack frame.
+ */ 	
+ENTRY(int_ret_from_sys_call)	
+	cli
+	testl $3,CS-ARGOFFSET(%rsp)
+	je retint_restore_args
+	movl $_TIF_ALLWORK_MASK,%edi
+	/* edi:	mask to check */
+int_with_check:
+	GET_THREAD_INFO(%rcx)
+	movl threadinfo_flags(%rcx),%edx
+	andl %edi,%edx
+	jnz   int_careful
+	jmp   retint_swapgs
+
+	/* Either reschedule or signal or syscall exit tracking needed. */
+	/* First do a reschedule test. */
+	/* edx:	work, edi: workmask */
+int_careful:
+	bt $TIF_NEED_RESCHED,%edx
+	jnc  int_very_careful
+	sti
+	pushq %rdi
+	call schedule
+	popq %rdi
+	jmp int_with_check
+
+	/* handle signals and tracing -- both require a full stack frame */
+int_very_careful:
+	sti
+	SAVE_REST
+	/* Check for syscall exit trace */	
+	testl $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SINGLESTEP),%edx
+	jz int_signal
+	pushq %rdi
+	leaq 8(%rsp),%rdi	# &ptregs -> arg1	
+	call syscall_trace_leave
+	popq %rdi
+	btr  $TIF_SYSCALL_TRACE,%edi
+	btr  $TIF_SYSCALL_AUDIT,%edi
+	btr  $TIF_SINGLESTEP,%edi
+	jmp int_restore_rest
+	
+int_signal:
+	testl $(_TIF_NOTIFY_RESUME|_TIF_SIGPENDING|_TIF_SINGLESTEP),%edx
+	jz 1f
+	movq %rsp,%rdi		# &ptregs -> arg1
+	xorl %esi,%esi		# oldset -> arg2
+	call do_notify_resume
+1:	movl $_TIF_NEED_RESCHED,%edi	
+int_restore_rest:
+	RESTORE_REST
+	jmp int_with_check
+	CFI_ENDPROC
+		
+/* 
+ * Certain special system calls that need to save a complete full stack frame.
+ */ 								
+	
+	.macro PTREGSCALL label,func,arg
+	.globl \label
+\label:
+	leaq	\func(%rip),%rax
+	leaq    -ARGOFFSET+8(%rsp),\arg /* 8 for return address */
+	jmp	ptregscall_common
+	.endm
+
+	PTREGSCALL stub_clone, sys_clone, %r8
+	PTREGSCALL stub_fork, sys_fork, %rdi
+	PTREGSCALL stub_vfork, sys_vfork, %rdi
+	PTREGSCALL stub_rt_sigsuspend, sys_rt_sigsuspend, %rdx
+	PTREGSCALL stub_sigaltstack, sys_sigaltstack, %rdx
+	PTREGSCALL stub_iopl, sys_iopl, %rsi
+
+ENTRY(ptregscall_common)
+	CFI_STARTPROC
+	popq %r11
+	CFI_ADJUST_CFA_OFFSET	-8
+	SAVE_REST
+	movq %r11, %r15
+	FIXUP_TOP_OF_STACK %r11
+	call *%rax
+	RESTORE_TOP_OF_STACK %r11
+	movq %r15, %r11
+	RESTORE_REST
+	pushq %r11
+	CFI_ADJUST_CFA_OFFSET	8
+	ret
+	CFI_ENDPROC
+	
+ENTRY(stub_execve)
+	CFI_STARTPROC
+	popq %r11
+	CFI_ADJUST_CFA_OFFSET	-8
+	SAVE_REST
+	movq %r11, %r15
+	FIXUP_TOP_OF_STACK %r11
+	call sys_execve
+	GET_THREAD_INFO(%rcx)
+	bt $TIF_IA32,threadinfo_flags(%rcx)
+	jc exec_32bit
+	RESTORE_TOP_OF_STACK %r11
+	movq %r15, %r11
+	RESTORE_REST
+	push %r11
+	ret
+
+exec_32bit:
+	CFI_ADJUST_CFA_OFFSET	REST_SKIP
+	movq %rax,RAX(%rsp)
+	RESTORE_REST
+	jmp int_ret_from_sys_call
+	CFI_ENDPROC
+	
+/*
+ * sigreturn is special because it needs to restore all registers on return.
+ * This cannot be done with SYSRET, so use the IRET return path instead.
+ */                
+ENTRY(stub_rt_sigreturn)
+	CFI_STARTPROC
+	addq $8, %rsp		
+	SAVE_REST
+	movq %rsp,%rdi
+	FIXUP_TOP_OF_STACK %r11
+	call sys_rt_sigreturn
+	movq %rax,RAX(%rsp) # fixme, this could be done at the higher layer
+	RESTORE_REST
+	jmp int_ret_from_sys_call
+	CFI_ENDPROC
+
+/* 
+ * Interrupt entry/exit.
+ *
+ * Interrupt entry points save only callee clobbered registers in fast path.
+ *	
+ * Entry runs with interrupts off.	
+ */ 
+
+/* 0(%rsp): interrupt number */ 
+	.macro interrupt func
+	CFI_STARTPROC	simple
+	CFI_DEF_CFA	rsp,(SS-RDI)
+	CFI_REL_OFFSET	rsp,(RSP-ORIG_RAX)
+	CFI_REL_OFFSET	rip,(RIP-ORIG_RAX)
+	cld
+#ifdef CONFIG_DEBUG_INFO
+	SAVE_ALL	
+	movq %rsp,%rdi
+	/*
+	 * Setup a stack frame pointer.  This allows gdb to trace
+	 * back to the original stack.
+	 */
+	movq %rsp,%rbp
+	CFI_DEF_CFA_REGISTER	rbp
+#else		
+	SAVE_ARGS
+	leaq -ARGOFFSET(%rsp),%rdi	# arg1 for handler
+#endif	
+	testl $3,CS(%rdi)
+	je 1f
+	swapgs	
+1:	addl $1,%gs:pda_irqcount	# RED-PEN should check preempt count
+	movq %gs:pda_irqstackptr,%rax
+	cmoveq %rax,%rsp							
+	pushq %rdi			# save old stack	
+	call \func
+	.endm
+
+ENTRY(common_interrupt)
+	interrupt do_IRQ
+	/* 0(%rsp): oldrsp-ARGOFFSET */
+ret_from_intr:		
+	popq  %rdi
+	cli	
+	subl $1,%gs:pda_irqcount
+#ifdef CONFIG_DEBUG_INFO
+	movq RBP(%rdi),%rbp
+#endif
+	leaq ARGOFFSET(%rdi),%rsp
+exit_intr:	 	
+	GET_THREAD_INFO(%rcx)
+	testl $3,CS-ARGOFFSET(%rsp)
+	je retint_kernel
+	
+	/* Interrupt came from user space */
+	/*
+	 * Has a correct top of stack, but a partial stack frame
+	 * %rcx: thread info. Interrupts off.
+	 */		
+retint_with_reschedule:
+	movl $_TIF_WORK_MASK,%edi
+retint_check:			
+	movl threadinfo_flags(%rcx),%edx
+	andl %edi,%edx
+	jnz  retint_careful
+retint_swapgs:	 	
+	cli
+	swapgs 
+retint_restore_args:				
+	cli
+	RESTORE_ARGS 0,8,0						
+iret_label:	
+	iretq
+
+	.section __ex_table,"a"
+	.quad iret_label,bad_iret	
+	.previous
+	.section .fixup,"ax"
+	/* force a signal here? this matches i386 behaviour */
+	/* running with kernel gs */
+bad_iret:
+	movq $-9999,%rdi	/* better code? */
+	jmp do_exit			
+	.previous	
+	
+	/* edi: workmask, edx: work */	
+retint_careful:
+	bt    $TIF_NEED_RESCHED,%edx
+	jnc   retint_signal
+	sti
+	pushq %rdi
+	call  schedule
+	popq %rdi		
+	GET_THREAD_INFO(%rcx)
+	cli
+	jmp retint_check
+	
+retint_signal:
+	testl $(_TIF_SIGPENDING|_TIF_NOTIFY_RESUME|_TIF_SINGLESTEP),%edx
+	jz    retint_swapgs
+	sti
+	SAVE_REST
+	movq $-1,ORIG_RAX(%rsp) 			
+	xorq %rsi,%rsi		# oldset
+	movq %rsp,%rdi		# &pt_regs
+	call do_notify_resume
+	RESTORE_REST
+	cli
+	movl $_TIF_NEED_RESCHED,%edi
+	GET_THREAD_INFO(%rcx)	
+	jmp retint_check
+
+#ifdef CONFIG_PREEMPT
+	/* Returning to kernel space. Check if we need preemption */
+	/* rcx:	 threadinfo. interrupts off. */
+	.p2align
+retint_kernel:	
+	cmpl $0,threadinfo_preempt_count(%rcx)
+	jnz  retint_restore_args
+	bt  $TIF_NEED_RESCHED,threadinfo_flags(%rcx)
+	jnc  retint_restore_args
+	bt   $9,EFLAGS-ARGOFFSET(%rsp)	/* interrupts off? */
+	jnc  retint_restore_args
+	call preempt_schedule_irq
+	jmp exit_intr
+#endif	
+	CFI_ENDPROC
+	
+/*
+ * APIC interrupts.
+ */		
+	.macro apicinterrupt num,func
+	pushq $\num-256
+	interrupt \func
+	jmp ret_from_intr
+	CFI_ENDPROC
+	.endm
+
+ENTRY(thermal_interrupt)
+	apicinterrupt THERMAL_APIC_VECTOR,smp_thermal_interrupt
+
+#ifdef CONFIG_SMP	
+ENTRY(reschedule_interrupt)
+	apicinterrupt RESCHEDULE_VECTOR,smp_reschedule_interrupt
+
+ENTRY(invalidate_interrupt)
+	apicinterrupt INVALIDATE_TLB_VECTOR,smp_invalidate_interrupt
+
+ENTRY(call_function_interrupt)
+	apicinterrupt CALL_FUNCTION_VECTOR,smp_call_function_interrupt
+#endif
+
+#ifdef CONFIG_X86_LOCAL_APIC	
+ENTRY(apic_timer_interrupt)
+	apicinterrupt LOCAL_TIMER_VECTOR,smp_apic_timer_interrupt
+
+ENTRY(error_interrupt)
+	apicinterrupt ERROR_APIC_VECTOR,smp_error_interrupt
+
+ENTRY(spurious_interrupt)
+	apicinterrupt SPURIOUS_APIC_VECTOR,smp_spurious_interrupt
+#endif
+				
+/*
+ * Exception entry points.
+ */ 		
+	.macro zeroentry sym
+	pushq $0	/* push error code/oldrax */ 
+	pushq %rax	/* push real oldrax to the rdi slot */ 
+	leaq  \sym(%rip),%rax
+	jmp error_entry
+	.endm	
+
+	.macro errorentry sym
+	pushq %rax
+	leaq  \sym(%rip),%rax
+	jmp error_entry
+	.endm
+
+	/* error code is on the stack already */
+	/* handle NMI like exceptions that can happen everywhere */
+	.macro paranoidentry sym
+	SAVE_ALL
+	cld
+	movl $1,%ebx
+	movl  $MSR_GS_BASE,%ecx
+	rdmsr
+	testl %edx,%edx
+	js    1f
+	swapgs
+	xorl  %ebx,%ebx
+1:	movq %rsp,%rdi
+	movq ORIG_RAX(%rsp),%rsi
+	movq $-1,ORIG_RAX(%rsp)
+	call \sym
+	.endm
+	
+/*
+ * Exception entry point. This expects an error code/orig_rax on the stack
+ * and the exception handler in %rax.	
+ */ 		  				
+ENTRY(error_entry)
+	CFI_STARTPROC	simple
+	CFI_DEF_CFA	rsp,(SS-RDI)
+	CFI_REL_OFFSET	rsp,(RSP-RDI)
+	CFI_REL_OFFSET	rip,(RIP-RDI)
+	/* rdi slot contains rax, oldrax contains error code */
+	cld	
+	subq  $14*8,%rsp
+	CFI_ADJUST_CFA_OFFSET	(14*8)
+	movq %rsi,13*8(%rsp)
+	CFI_REL_OFFSET	rsi,RSI
+	movq 14*8(%rsp),%rsi	/* load rax from rdi slot */
+	movq %rdx,12*8(%rsp)
+	CFI_REL_OFFSET	rdx,RDX
+	movq %rcx,11*8(%rsp)
+	CFI_REL_OFFSET	rcx,RCX
+	movq %rsi,10*8(%rsp)	/* store rax */ 
+	CFI_REL_OFFSET	rax,RAX
+	movq %r8, 9*8(%rsp)
+	CFI_REL_OFFSET	r8,R8
+	movq %r9, 8*8(%rsp)
+	CFI_REL_OFFSET	r9,R9
+	movq %r10,7*8(%rsp)
+	CFI_REL_OFFSET	r10,R10
+	movq %r11,6*8(%rsp)
+	CFI_REL_OFFSET	r11,R11
+	movq %rbx,5*8(%rsp) 
+	CFI_REL_OFFSET	rbx,RBX
+	movq %rbp,4*8(%rsp) 
+	CFI_REL_OFFSET	rbp,RBP
+	movq %r12,3*8(%rsp) 
+	CFI_REL_OFFSET	r12,R12
+	movq %r13,2*8(%rsp) 
+	CFI_REL_OFFSET	r13,R13
+	movq %r14,1*8(%rsp) 
+	CFI_REL_OFFSET	r14,R14
+	movq %r15,(%rsp) 
+	CFI_REL_OFFSET	r15,R15
+	xorl %ebx,%ebx	
+	testl $3,CS(%rsp)
+	je  error_kernelspace
+error_swapgs:	
+	swapgs
+error_sti:	
+	movq %rdi,RDI(%rsp) 	
+	movq %rsp,%rdi
+	movq ORIG_RAX(%rsp),%rsi	/* get error code */ 
+	movq $-1,ORIG_RAX(%rsp)
+	call *%rax
+	/* ebx:	no swapgs flag (1: don't need swapgs, 0: need it) */	 
+error_exit:		
+	movl %ebx,%eax		
+	RESTORE_REST
+	cli
+	GET_THREAD_INFO(%rcx)	
+	testl %eax,%eax
+	jne  retint_kernel
+	movl  threadinfo_flags(%rcx),%edx
+	movl  $_TIF_WORK_MASK,%edi
+	andl  %edi,%edx
+	jnz  retint_careful
+	swapgs 
+	RESTORE_ARGS 0,8,0						
+	iretq
+	CFI_ENDPROC
+
+error_kernelspace:
+	incl %ebx
+       /* There are two places in the kernel that can potentially fault with
+          usergs. Handle them here. The exception handlers after
+	   iret run with kernel gs again, so don't set the user space flag.
+	   B stepping K8s sometimes report an truncated RIP for IRET 
+	   exceptions returning to compat mode. Check for these here too. */
+	leaq iret_label(%rip),%rbp
+	cmpq %rbp,RIP(%rsp) 
+	je   error_swapgs
+	movl %ebp,%ebp	/* zero extend */
+	cmpq %rbp,RIP(%rsp) 
+	je   error_swapgs
+	cmpq $gs_change,RIP(%rsp)
+        je   error_swapgs
+	jmp  error_sti
+	
+       /* Reload gs selector with exception handling */
+       /* edi:  new selector */ 
+ENTRY(load_gs_index)
+	pushf
+	cli
+        swapgs
+gs_change:     
+        movl %edi,%gs   
+2:	mfence		/* workaround */
+	swapgs
+        popf
+        ret
+       
+        .section __ex_table,"a"
+        .align 8
+        .quad gs_change,bad_gs
+        .previous
+        .section .fixup,"ax"
+	/* running with kernelgs */
+bad_gs: 
+	swapgs			/* switch back to user gs */
+	xorl %eax,%eax
+        movl %eax,%gs
+        jmp  2b
+        .previous       
+	
+/*
+ * Create a kernel thread.
+ *
+ * C extern interface:
+ *	extern long kernel_thread(int (*fn)(void *), void * arg, unsigned long flags)
+ *
+ * asm input arguments:
+ *	rdi: fn, rsi: arg, rdx: flags
+ */
+ENTRY(kernel_thread)
+	CFI_STARTPROC
+	FAKE_STACK_FRAME $child_rip
+	SAVE_ALL
+
+	# rdi: flags, rsi: usp, rdx: will be &pt_regs
+	movq %rdx,%rdi
+	orq  kernel_thread_flags(%rip),%rdi
+	movq $-1, %rsi
+	movq %rsp, %rdx
+
+	xorl %r8d,%r8d
+	xorl %r9d,%r9d
+	
+	# clone now
+	call do_fork
+	movq %rax,RAX(%rsp)
+	xorl %edi,%edi
+
+	/*
+	 * It isn't worth to check for reschedule here,
+	 * so internally to the x86_64 port you can rely on kernel_thread()
+	 * not to reschedule the child before returning, this avoids the need
+	 * of hacks for example to fork off the per-CPU idle tasks.
+         * [Hopefully no generic code relies on the reschedule -AK]	
+	 */
+	RESTORE_ALL
+	UNFAKE_STACK_FRAME
+	ret
+	CFI_ENDPROC
+
+	
+child_rip:
+	/*
+	 * Here we are in the child and the registers are set as they were
+	 * at kernel_thread() invocation in the parent.
+	 */
+	movq %rdi, %rax
+	movq %rsi, %rdi
+	call *%rax
+	# exit
+	xorq %rdi, %rdi
+	call do_exit
+
+/*
+ * execve(). This function needs to use IRET, not SYSRET, to set up all state properly.
+ *
+ * C extern interface:
+ *	 extern long execve(char *name, char **argv, char **envp)
+ *
+ * asm input arguments:
+ *	rdi: name, rsi: argv, rdx: envp
+ *
+ * We want to fallback into:
+ *	extern long sys_execve(char *name, char **argv,char **envp, struct pt_regs regs)
+ *
+ * do_sys_execve asm fallback arguments:
+ *	rdi: name, rsi: argv, rdx: envp, fake frame on the stack
+ */
+ENTRY(execve)
+	CFI_STARTPROC
+	FAKE_STACK_FRAME $0
+	SAVE_ALL	
+	call sys_execve
+	movq %rax, RAX(%rsp)	
+	RESTORE_REST
+	testq %rax,%rax
+	je int_ret_from_sys_call
+	RESTORE_ARGS
+	UNFAKE_STACK_FRAME
+	ret
+	CFI_ENDPROC
+
+ENTRY(page_fault)
+	errorentry do_page_fault
+
+ENTRY(coprocessor_error)
+	zeroentry do_coprocessor_error
+
+ENTRY(simd_coprocessor_error)
+	zeroentry do_simd_coprocessor_error	
+
+ENTRY(device_not_available)
+	zeroentry math_state_restore
+
+	/* runs on exception stack */
+ENTRY(debug)
+	CFI_STARTPROC
+	pushq $0
+	CFI_ADJUST_CFA_OFFSET 8		
+	paranoidentry do_debug
+	/* switch back to process stack to restore the state ptrace touched */
+	movq %rax,%rsp	
+	testl $3,CS(%rsp)
+	jnz   paranoid_userspace	
+	jmp paranoid_exit
+	CFI_ENDPROC
+
+	/* runs on exception stack */	
+ENTRY(nmi)
+	CFI_STARTPROC
+	pushq $-1
+	CFI_ADJUST_CFA_OFFSET 8		
+	paranoidentry do_nmi
+	/* ebx:	no swapgs flag */
+paranoid_exit:
+	testl %ebx,%ebx				/* swapgs needed? */
+	jnz paranoid_restore
+paranoid_swapgs:	
+	cli
+	swapgs
+paranoid_restore:	
+	RESTORE_ALL 8
+	iretq
+paranoid_userspace:	
+	cli
+	GET_THREAD_INFO(%rcx)
+	movl threadinfo_flags(%rcx),%edx
+	testl $_TIF_NEED_RESCHED,%edx
+	jnz paranoid_resched
+	testl $(_TIF_SIGPENDING|_TIF_NOTIFY_RESUME|_TIF_SINGLESTEP),%edx
+	jnz paranoid_signal
+	jmp paranoid_swapgs
+paranoid_resched:		
+	sti
+	call schedule
+	jmp paranoid_exit
+paranoid_signal:		
+	sti
+	xorl %esi,%esi /* oldset */
+	movq %rsp,%rdi /* &pt_regs */
+	call do_notify_resume
+	jmp paranoid_exit
+	CFI_ENDPROC
+	
+ENTRY(int3)
+	zeroentry do_int3	
+
+ENTRY(overflow)
+	zeroentry do_overflow
+
+ENTRY(bounds)
+	zeroentry do_bounds
+
+ENTRY(invalid_op)
+	zeroentry do_invalid_op	
+
+ENTRY(coprocessor_segment_overrun)
+	zeroentry do_coprocessor_segment_overrun
+
+ENTRY(reserved)
+	zeroentry do_reserved
+
+	/* runs on exception stack */
+ENTRY(double_fault)
+	CFI_STARTPROC
+	paranoidentry do_double_fault
+	movq %rax,%rsp
+	testl $3,CS(%rsp)
+	jnz paranoid_userspace		
+	jmp paranoid_exit
+	CFI_ENDPROC
+
+ENTRY(invalid_TSS)
+	errorentry do_invalid_TSS
+
+ENTRY(segment_not_present)
+	errorentry do_segment_not_present
+
+	/* runs on exception stack */
+ENTRY(stack_segment)
+	CFI_STARTPROC
+	paranoidentry do_stack_segment
+	movq %rax,%rsp
+	testl $3,CS(%rsp)
+	jnz paranoid_userspace
+	jmp paranoid_exit
+	CFI_ENDPROC
+
+ENTRY(general_protection)
+	errorentry do_general_protection
+
+ENTRY(alignment_check)
+	errorentry do_alignment_check
+
+ENTRY(divide_error)
+	zeroentry do_divide_error
+
+ENTRY(spurious_interrupt_bug)
+	zeroentry do_spurious_interrupt_bug
+
+#ifdef CONFIG_X86_MCE
+	/* runs on exception stack */
+ENTRY(machine_check)
+	CFI_STARTPROC
+	pushq $0
+	CFI_ADJUST_CFA_OFFSET 8	
+	paranoidentry do_machine_check
+	jmp paranoid_exit
+	CFI_ENDPROC
+#endif
+
+ENTRY(call_debug)
+       zeroentry do_call_debug
+